Accessories and Parts   >    Camper Jacks   x   >  

Replaces the Atlas jack on your RV's Kwikee Level Best hydraulic leveling and stabilizing system with a 10,000-lb weight capacity.

Replaces the motor from your Stromberg Carlson electric landing gear (LG-3 or LG-4). Can also be used with Lippert and Venture landing gear. Direct drive reduces the strain on your jack, and allows your landing gear to lift with ease.

Replaces the ACME threaded rod and threaded nut on your etrailer or Ram square, direct-weld jack with a 12K lift capacity. Designed for TJD-12000 Series jacks.

Designed for use with your heavy-duty Bulldog single-speed jack, this powered drive offers quieter operations and a more efficient use of electrical power than competitive units. Lifting has never been faster or easier.

Replace 1 rear right leg for your Lippert Ground Control 3.0 automatic leveling system (LC358590 or LC675817). Leg includes the mounting bracket needed for installation. Snapper pin to attach footpad (LC225598) is sold separately.

Replace the motor on your standard Lippert electric stabilizer jack system with this Klauber C-800 motor.

Replaces the motor in your rear landing gear legs for your RV or fifth-wheel or Lippert Components stabilizer jacks (LC298707, LC337199, or LC369774).

Replaces the front jack tube for your Lippert Components Ground Control 3.0 automatic leveling system (LC358590 or LC675817).

Replaces the Atlas jack on your RV's Kwikee Level Best hydraulic leveling and stabilizing system with 17,000-lb weight capacity.

Replaces the control kit and wiring for your Lippert Components Power Gear manual leveling system.

12V switch replaces the extend/retract switch for your 5th-wheel or tongue jack. Momentary-on/off/momentary-on switch assembly. 16 amps at 125V AC (CSA), 15 amps at 125V AC (UL), 10 amps at 250V AC, 3/4 hp at 250V AC, 30 amps at 12V DC.

Replaces the 5,500-rpm motor from your Stromberg Carlson electric landing gear. Designed for use with models LG-1 and LG-2. Can also be used with Atwood, Lippert, and Venture landing gear.

Replaces the gearbox on Venture electric fifth-wheel RV landing gear assemblies. Easy installation. Aluminum construction.

Swing-out extension brackets allow you to adjust the location of your HappiJac truck camper jacks. Includes 2 brackets and installation hardware.

Replaces the follow jack from your Stromberg Carlson landing gear. Designed for use with models LG-1, LG-3, and LG-183708. Follow leg connects to the lead jack in your landing gear set with a cross shaft (not included).

Replaces the power switch on your electric A-frame jack with footplate (EJ-3520-BBX).

Detachable footplate fits jacks with 2" diameter tubing and is rated up to 5,000 lbs.

Replaces 1 rear left leg for your Lippert Ground Control 3.0 automatic leveling system (LC358590 or LC675817). Leg includes the mounting bracket needed for installation. Snapper pin to attach footpad (LC225598) is sold separately.

Replaces the control panel for your Lippert Components Ground Control 3.0 automatic leveling system (LC358590 or LC675817) or Ground Control TT automatic travel trailer leveling system (LC672136).

Replace the touchscreen remote that came with your Lippert Ground Control 3.0 automatic leveling system. This remote features a convenient leveling app that lets you operate your system from up to 50' away. A wall charger is included.

Replaces the motor and gear head assembly for your HappiJac truck camper jack system. Compatible with 41, 42, 45, and 48 Series jacks.

Removable, corrosion-resistant footplate fits jacks with 2" diameter tubing and is rated up to 5,000 lbs.

Replaces the powered A-frame jack for your Lippert Ground Control TT leveling system. 2 Toggle switches raise and lower your trailer tongue. Jack has a retracted height of 10-3/4", an extended height of 28-3/4", and 18" of travel.