Ark Drop Down Corner RV Stabilizer Jacks Feature Review Video

I contacted the manufacturer about the lengths for these stabilizer jacks and have included the information they were able to provide me. The Ark Drop Down Corner RV Stabilizer Jacks #ARK34FR are 422 mm (16.6") collapsed and 600mm (23.6")…

The Ark stabilizers won't affect your ground clearance, but to determine the right ones that really depends on how high up your frame is off the ground. Overall, the Ark RV Stabilizer Jacks #ARK34FR are 16.6" collapsed and 23.6"…

We do carry the 33" Ark Stabilizer Jack that you are looking for with part #ARK77FR. I was able to track down a few drawings that you should find helpful. These are for the 30" #ARK94FR and the 24" #ARK34FR Stabilizer jacks. I'm…

I have attached for you below a photo with the dimensions of the weld-on plate for the Ark Drop Down Corner RV Stabilizer Jack Kit part #ARK94FR. The plates are 117mm long x 72.50mm wide or 4.6" long x 2.8" wide.

The Ark Drop Down Corner RV Stabilizer Jacks #ARK94FR are able to lock into place at 30 and 60 degrees as stabilizers. They also have the 90 degree position where it is rated for 1,929 lbs and then the stored position.

If you are needing to replace the stabilizer jacks on your 2011 K-Z Durango 1500, we will have 2 different styles. The Stallion Stabilizer Jacks #288-01892-2 are a drop down style so they are easy to use, but they are only rated up to 1,000 pounds…

I reached out to my contact at Demco who was able to supply me with the attached dimensional photo of the Demco A-Frame Trailer Coupler #DM14793-95.

The Ark Drop Down Corner RV Stabilizer Jack Kit - 30" Long Corner Steadies - Black Item #ARK94FR fully retracted are about 19-1/2" long. When folded up, the widest point is going to hand down about 4-1/2".

The Ark Drop Down Corner RV Stabilizer Jacks #AR34FR are designed to be welded on, so this is the only way we can recommend installing them. With the included mounts there really is not enough room between the stabilizer itself and the mounting plate…

Both of the ARK stabilizer jacks #ARK94FR and #ARK87FR can rotate 90 degrees forward and back so in a way it is 180 degrees like you asked about. The difference is the #ARK94FR has a square tube and #ARK87FR has a round tube. These are both going be…

That is correct the inner dimension of the Demco A-Frame Trailer Coupler item #DM14793-95 is 10 3/4 inches. I have attached a picture that breaks down the measurements. You would need to fabricate a spacer on either side to attach this coupler to…

The Demco A-Frame Trailer Coupler #DM14793-95 is designed for standard A-frame trailers which is 50 degrees as you mentioned. I confirmed this with my contact at Demco. This is a 10,000-lb coupler and it is designed for a 2-inch hitch ball.