Filter Products
Filter by Type of Jack
$360.99 - $3,901.49
Videos
for Camper Jacks
Help Articles
for Camper Jacks
Expert Answers
for Camper Jacks
We do carry the 33" Ark Stabilizer Jack that you are looking for with part #ARK77FR. I was able to track down a few drawings that you should find helpful. These are for the 30" #ARK94FR and the 24" #ARK34FR Stabilizer jacks. I'm…
view full answer...I contacted the manufacturer about the lengths for these stabilizer jacks and have included the information they were able to provide me. The Ark Drop Down Corner RV Stabilizer Jacks #ARK34FR are 422 mm (16.6") collapsed and 600mm (23.6")…
view full answer...There are a few things that go into making sure you choose the correct replacement landing gear. First you need to be sure that the landing gear is rated properly. If you check out the weight rating on your current landing gear just make sure the…
view full answer...Hey Stephen, on the front sticker of the jack leg there should be a part number listed on it as well as the brand name Power Gear. Other ways to identify it is using measurements from the jack. For example the part #LC82TF has a bore diameter of 3…
view full answer...Hey Doug, That's a good question because fit is really important so the cover stays snug on your trailer, and there is a specific way to measure for the etrailer covers. It's pretty simple, and what you want to do is measure the body of the…
view full answer...The sure way to pick out replacement landing gear for a trailer that will bolt right up to the current brackets is to measure the distance between the mounting brackets (underside of top bracket to top of lower bracket as shown in the diagram) if it…
view full answer...The only difference between the #RVLG-8HDL and the #RVLG-8000 is that the #RVLG-8HDL includes the manual crank handle, while the #RVLG-8000 doesn't. The dimensions for both are the same. • Retracted Height of 32-3/4 inches • Extended Height of…
view full answer...Hey Ty, what size hitch do you have and how much of an extension do you need? The Curt extension part #C45048 that you referenced fits a 2-1/2 inch hitch and provides a 24 to 36 inch extension.
view full answer...The replacement landing gear motor you referenced, Stromberg Carlson #LG-142178, is a widely compatible replacement motor that will work with most major brands of 5th wheel landing gear, including Stromberg Carlson, Lippert, Venture and Atwood. These…
view full answer...Hi Udi, I unfortunately wouldn't be able to tell you what the right replacement would be without knowing which system you have. I'm assuming you have a hydraulic leveling system since this is a class A motorhome so that narrows it down a bit.…
view full answer...You should not have a problem with the camper sliding out when you are using any of the Brophy Cable Camper Jacks. The jack is very stable because of the tripod base. That stability will make the jack very difficult to tip to the front or the back.…
view full answer...I did a little digging on your 2021 Grand Design Reflection 303RLS, and it appears you have the Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System w Touchpad and Remote #LC358590. With that being said, you'll want to use the…
view full answer...