Stromberg Carlson Electric Trailer Jack - Drop Leg - A-Frame - 24" Lift - 3,500 lbs - Black
(611 reviews)
Price: $200.63
In Stock
Stromberg Carlson Electric Trailer Jack - Drop Leg - A-Frame - 24" Lift - 3,500 lbs - Black
Item # JET-3755
Retail:$230.99
Our Price: $200.63
You Save: $30.36
This item qualifies for Free Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (611)
- Q & A (0)
- Photos
Stromberg Carlson Camper Jacks - JET-3755
- Pop Up Camper
- Teardrop Camper
- Travel Trailer
- Leveling Jacks
- Tongue Jack
- Electric Jack
- 1 Jack
- 24 Inch Lift
- Stromberg Carlson
- Bolt-On
- Weld-On
Use this electric tongue jack to lift your trailer with the flip of a switch. The steel jack has 19" of travel and a 5" drop leg for extra lift. Extends 6" in 32.2 seconds with 1,000 lbs of tongue weight.
Features:
- Electric jack with 12V motor lets you lift and lower your A-frame trailer quickly and easily
- Top-mounted toggle switches are easily accessible
- Large LED side lights make it simple to set up your camper at night
- Also ease weight distribution hookup and disconnect
- Bubble level on top of housing helps you level your trailer
- Bull's-eye design shows front to back and side to side
- Drop leg allows for greater adjustability
- Rust-resistant powder coated steel parts are strong and durable
- Housing is made of vacuum-formed plastic for protection from the elements
- Black cover is painted to resist fading
- Round, zinc-plated steel footplate provides stability
- Emergency crank (included) allows you to manually operate jack if needed
- Easy bolt-on or weld-on installation for A-frame trailers
- 3-Star washer included to ensure good ground connection
- Mounting holes fit 3" spacing
Specs:
- Bracket height:
- 8-1/2" Retracted
- 27-1/2" Extended
- Total Lift: 24"
- Travel: 19"
- Drop leg: 5"
- Travel speed (w/ 1,000-lb tongue weight):
- Extends 6" in 32.2 seconds
- Retracts 6" in 28.4 seconds
- Clearance from bottom of mounting plate to top of jack 23"
- Lift capacity: 3,500 lbs
- Outer tube diameter: 2-1/4"
- Inner tube diameter: 2"
- Footplate diameter: 5-1/2"
- Power wire: 10 gauge
- Motor draws 30 amps under load
- 2-Year warranty
How to Determine the Lift Capacity You Need in a Jack
A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball. To do this, you'll need a jack with a lift capacity high enough to handle your trailer's tongue weight.
Tongue weight is the amount of weight that your trailer applies to the back of your tow vehicle. Typically, your tongue weight should be 10-15% of your total trailer weight (trailer + cargo). In other words, a 10,000-lb trailer would have a tongue weight between 1,000 lbs and 1,500 lbs. For a trailer this size, you would need a jack with a lift capacity of at least 1,500 lbs.
It's okay to have a jack with a weight rating that is higher than your trailer's tongue weight. In fact, a jack with a higher lift capacity should operate more efficiently, allowing you to spend less time cranking and more time camping.
Trailer and Camper Jack Lift
Every jack offers a certain amount of lift or travel. Screw travel is the distance the jack extends when you crank it (or toggle it to "extend" on an electric model). Some jacks include a drop leg for extra adjustability. On these jacks, you'll see the maximum extension of the drop leg listed in the specs as well. Adding the screw travel and drop leg travel together will give you the total lift. The total lift listed above can help you determine how high this jack will be able to raise your trailer.
JET-3755 Stromberg Carlson Electric A-Frame Trailer Jack - Black - 24" Lift - 3,500 Pounds
Installation Details
California residents: click here
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- Defective
- etrailer mistake
Customer Reviews
Stromberg Carlson Electric Trailer Jack - Drop Leg - A-Frame - 24" Lift - 3,500 lbs - Black - JET-3755
Average Customer Rating: 4.8 out of 5 stars (611 Customer Reviews)
Use this electric tongue jack to lift your trailer with the flip of a switch. The steel jack has 19" of travel and a 5" drop leg for extra lift. Extends 6" in 32.2 seconds with 1,000 lbs of tongue weight.by: Morgan12/24/2021
This is a quality made jack, super easy install, lifts my trailer with ease, I like the fact that it has a backup handle Incase of dead battery. I used a different fuse holder, I'm not a fan of glass tube fuse, the contact area is minimal compared to blade style, and I keep spares of that style being that is what my truck and trailer both use.
by: Donald 04/10/2024
The Stromberg Jack was delivered on time with all the parts needed and has worked great. I appreciate that etrailer does a one year review unlike others that ask for a review the day it arrives. When I need to order Rv parts I always try to use etrailer
by: Jimmy c09/13/2017
Ordered my electric tongue jack on Monday was told would receive on Friday which I thought was pretty quick received two days later two days earlier than I thought. Was excited went out removed manual jack put new jack on and was done less than twenty minutes easy hookup and works like a dream. Thanks e-trailer for the fast and courteous service. Will do business again with you no more manual connecting and disconnecting
Jimmy C.
9/13/2018
Love it! So does my back.thanks
by: Nathan T07/15/2019
Part came in good styrofoam padding, screws, washers, extra fuses & connector. Nothing missing. Video on line and on email was clear and easy to understand. I am really happy I bought this product.
Nathan T.
7/16/2020
Ít still working great, I loved it. Thanks
by: DeNomolos06/04/2022
One year in the jack still works well. The level bubble promptly failed soon after installation, with the liquid inside disappearing even though I have a leatherette cover protecting it from the elements. That being said, it's a bit gimmicky anyway and not really needed.
Cons I would list after a year's service are: 1) jack is SLOWWWWWWW...I ended up getting an Ox Block to minimize the up/down travel. 2) LED night light is so weak its pretty much useless. The switch is redundant with the up/down one and you'll fumble with both.
All in all minor quibbles and I still rate four stars; it sure beats hand cranking!
by: Kenneth 11/16/2022
works great - easy install - great customer service from etrailer and follow-up after sell - and aways the best price for replacement parts
Kenneth
11/17/2023
Great
by: Kyle03/26/2024
Thanks for the fast service and fast shipping on my order. My order came quick so now I actually have time to replace it, before next Wednesday. We are going camping next week
by: Steve 03/21/2024
The trailer jack works perfectly and was easy to install
by: John 01/10/2024
Jack works great. it was put on a racing trailer that is very heavy on the tongue.
by: Jeff 08/27/2018
I bought this jack to replace a Lippert unit that seized in 1 1/2 years of light use. This was my first purchase from Etrailer and I am really impressed with the service! Order was shipped immediately and free along with a tracking tool that showed exactly where the jack was while in transit to me. The jack arrived in great condition and had everything I needed for installation. The install was a three bolt operation and a one wire connection to my existing relay. Saved a bunch by doing it myself and it was easy. I am really going to like the bubble level on this jack! I used to run back and forth from inside to out while balancing. The bubble level shows you right at the jack. I have a 21 foot travel trailer and this jack works great. Can't speak for durability yet as I just installed. Look forward to ordering anything else needed for my trailer from these guys. All the good reviews they have tell you the story! Thanks, Jeff
by: Jeff T07/15/2019
I am very happy with my power jack. Works great, looks good & was easy to install.
Jeff T.
7/16/2020
The electric jack is still working great! We have had no problems with it at all since we bought it.
by: John 10/27/2023
Item arrived a day early. Installation was easy. Jack works smoothly. 3500# rating is 500# better than the factory installed jack.
by: Jeff M07/03/2017
I purchased this product and the cover at the same time due to the features and a small part the level on the top. This was after speaking with Troy in depth about it. etrailer, Troy and the videos are great and the product was delivered when Troy said it would and in good condition. I installed it in a relatively short amount of time with my wife cheering me on with a glass of wine.
The one aspect to consider is the mounting plate of the product is round and my original manual tongue jack had a triangular plate. When I tried putting the product on, the battery box was in the way of the round mounting plate. I had to move the battery box back a couple of inches and reattach it for the mounting plate to fit correctly. This only delay the install a short amount of time. Otherwise no issues.
I went camping for 1 1/2 weeks at 2 different campgrounds and I utilize a weight distribution/sway control system to pull the trailer. The jack lifted the trailer and the rear of the truck up high enough to attach the system to the trailer without issue.
Jeffrey M.
7/9/2018
So far the product is working fine with no operational issues, however the bubble on the level has grown to where it is not giving me a better idea of how the trailer is leveled. So I am not sure if there is a small leak to cause this or was it from the heat.
Rachael H.
7/10/2018
If you would like the bubble level and replacement manual override cover is available as a replacement part # 2500-3755E.
Helpful Links
by: Cort C.02/19/2016
The product was great. It is just what you said it was. If you notice the mouting plate, the extensions are to raise the jack up because this trailer sets really low. The origial hand crack jack was bent when I purchased the trailer. Problem solved. This power jack compared to hand jack is the same distance from mouting plate to bottom of foot, both colapsed all the way. My wife loves it, no more hand cranking. Ran power wire inside to battery. Crimp terminal on wire. Hook to battery. Done. Installation, 20 minutes. I purchased cover (bag) to go over power head too. On another note, All 3 tire covers fit like a glove. Now to get a price on 3 new tires. Then we can enjoy it. Thanks etrailer. other products I puchased were great also.
by: Lyn 12/07/2022
Life changing. Love it!
Lyn
12/8/2023
Love it! Game changer. Everyone should have an electric jack on their horse trailer.
Mike L.
12/8/2023
@Lyn We're glad to hear you like your electric jack, thank you for checking in!
by: Dwayne B.07/07/2017
Super fast delivery! I paid the $2 or $3 extra to get it in 3 days and I got it in two days! AWESOME! Thanks so much for the fast service as I have a big trip planned next week. The jack fit perfectly. It was super easy to install in place of an existing faulty jack. SOOO MUCH easier to hook up the big travel trailer. I am looking forward to a fun filled trip without having to worry about this any more.
by: 02/01/2023
Easy install and made our adventure that more enjoyable,
Outstanding service, availability of products, advise and follow up. Top Notch !!!
Palmerfam Alaska
by: Bob H07/14/2020
It does it’s job. I use it with a weight distribution system so it’s actually lifting my suv and camper works well. But I believe with any electric toy he jack u should use a cover regardless of what the manufacturer says.
Robert H.
7/15/2021
I bought this jack to replace the one I bought locally from a camper store. After the second one of theirs stopped working just past the warranty period. I moved on to this one. I truly think adding a cover over the tounge jack made all the difference in the world. The jack works great, never any problems. I even had to use the manual crank once too. that worked great as well. I would suggest this product.
by: Al10/21/2019
Very easy install. Lowered my trailer onto two 2 ton jacks and dropped this right in. Torqued to 20 lbs, wired and done. Pretty quiet and not as slow as others I’ve researched.
by: Morgan 01/20/2022
Great Jack, lifts trailer with ease, I'm using it on a toy hauler that has 1000lb tongue weight, better to have enough power than overload and burn up motors.
Morgan
1/21/2023
Still works as it did the day I installed it, perfect! Im sure it will work for years to come!
by: JackofAllTrade11/28/2021
The trailer jack is a well built item. It runs smoothly and is very quiet. The jack came with a fuse assembly that I was not aware was included. Pricing was very good compared with local stores and other internet sites.
The only complaint is cosmetic. The motor unit on the part received does not line up directly above the center bolt. The motor assembly is off about 10 degrees from dead-center above the forward, center bolt hole.
Jackofalltrade
11/29/2022
Still going strong.
by: Stanley11/29/2018
The tongue jack was just as advertised and came in quickly. I am 69 years old and had no trouble with the installation. It bolted to the existing bolt holes and works great. I should have gotten it long ago.
by: Tom D04/12/2017
Item arrived in a week. Very well constructed, new mounting bolts were included. Fast and easy installation. I'm very particular about routing wires and I was still done in less than a half hour. I'll be using it this weekend .
by: Laurence 10/28/2021
So far so good. Very smooth operation and reasonable speed. Install was easy, but directions were just a bit unclear. Images in the manual could be more legible. The in-line fuse holder came in an unbroken loop and needed to be cut and stripped in order to install, and this step (though obvious) was not in the instructions. Overall I would order this product again and recommend to others.
Laurence
10/28/2022
Jack died while boondocking in Colorado. Our tongue weight was about 1100lb and we travel with a loaded f350 srw gas. Jack used to set Wdh bars and had to lift both trailer tongue and truck bed. Not sure if a 3500 lb jack was enough for that purpose. Replaced with a heavier jack same mfg.
by: Keith W.04/09/2017
Very pleased with my purchase. Easy install, works great. I have ordered from etrailer before and have never been disappointed. I absolutely recommend etrailer.
25
611
Show More Reviews
See what our Experts say about this Stromberg Carlson Camper Jacks
- Replacement Cap for Manual Crank for the Stromberg Carlson Electric Trailer Jack # JET-3755You can find the replacement cap for your Stromberg Carlson Electric Trailer Jack # JET-3755 with part # 2500-3755E on our site.
view full answer... - Installation of Stromberg Carlson Electric Trailer Jack 3,500 lbs.The Stromberg Carlson Electric Trailer Jack - Drop Leg - A-Frame - 24" Lift - 3,500 lbs - Black # JET-3755 will have the included fuse holder mounted in between the positive battery terminal of your battery and the black power wire for your jack. I've attached a link to the installation instructions to assist.
view full answer... - Gauge of Wire Used With Stromberg Carlson Electric A-Frame JackYou can use 10 Gauge Primary Wire # 10-1-1 to ground to your trailer chassis. The Stromberg Carlson Electric Trailer Jack # JET-3555 and # JET-3755 uses a 10-gauge power wire as well so if you need extra wire for the jack to hook up to your battery you can use 10 Gauge Primary Wire # 10-1-1 and connect it to the positive terminal with Ring Terminal # DW05705-1.
view full answer... - Recommended Trailer Jacks For Camper With Dry Weight Of 6000lbsThe # JET-3755 has a lift capacity of 3500lbs which will easily work for your camper with a dry weight of 6000lbs. A trailer jack is not rated by trailer weight. So in this case a 3,500lb rated jack could in theory handle 3500lbs of tongue weight. Jacks are usually overrated for the weight they actually need to lift because they need to lift weight and not just hold the weight.
view full answer... - Replacement Foot Pad For Stromberg Carlson 2500 Electric Tongue JackYou will need the Replacement Foot Pad # 2500-25 for your Stromberg Carlson Electric A-Frame Tongue Jack # JET-2500. You can see this foot mounts on the outside of the inner tube while the Replacement Foot Pad # 2500-3755G you found fits inside the larger tube on the Jack # JET-3755. We do have the Pin # 2500-26 for this as well. If your concern is with the amount of time waiting on the jack to raise and lower we do have the Stand # A10-0900 which is 8-3/8" tall and will greatly reduce...
view full answer... - Where Can I Store The Manual Jack Tool On My Stromberg Carlson Electric Trailer Jack?There is no place on the jack # JET-3755 to store the manual crank. You will need to find a place in your camper or vehicle to store it. I use the etrailer bag for my ratchet straps but there's more room in there than what the straps take, you can fit it in there. If you need straps, buy the bag with the straps # ETBMB-05852 or if you don't need the straps you can buy just the bag # e98900.
view full answer... - Power A-Frame Trailer Jack That Will Fit With Truck Tailgate DownMost jacks, like the Stromberg Carlson # JET-3755, will allow you to open up the tailgate on your truck if you rotate the the trailer jack. Most people mount the trailer jack so that the controls face the direction of travel but there is nothing wrong with having the jack face a different direction. The Stromberg Carlson jack mentioned above is one of our smaller jacks so you can definitely go that route, or you could go a completely different direction by using the Trailer Valet JXC Trailer...
view full answer... - Replacement Option for Lippert Smart Jack Electric Trailer JackThere was indeed a recall on the Lippert Smart Jack Electric Trailer Jack part # LC643589. It sounds like you have a pre-recall version but in order to confirm you can look on the back of the jack for a sticker on the stem with a serial number. If there is no serial number present or if it is lower than SJWP2017-07-0001, then the jack was made prior to the recall and it will need to be replaced. In regard to who is responsible, that is not really my place to say but most people will go...
view full answer... - Retracted Bracket Height for Jet Powered A-Frame Jack part # JET-3755 The retracted bracket height that you are looking for on the Jet powered jack part # JET-3755 is 8-1/2 inches. That's the distance from the bottom of the mounting flange to the bottom of the foot when fully retracted.
view full answer... - Recommended Electric Trailer Jack for 7x14 foot Enclosed TrailerFor your 7x14 foot enclosed trailer, I recommend the Stromberg Carlson Electric Trailer Jack # JET-3755. This jack has a lift of up to 24 inches, has a drop leg for faster extension and retraction, and has a motor rated higher then your trailer tongue weight. This mean very little wear on your jack as you use it because it doesn't need to work as hard. For the price point and function, I think this is the best jack for your application. Our customers have been extremely pleased with...
view full answer... - Will the Stromberg Carlson Jack # JET-3755 Work with the Lippert # LC429756 Bike RackYes! The Stromberg Carlson Electric Trailer Jack # JET-3755 is compatible with the Lippert # LC429756 that you referenced and it does measure the 8-1/2" when retracted. You could potentially use a caster wheel like part # PS1400750340 but this would cut your tongue weight from 3,500 lbs down to 1,200 lbs. All of our caster and wheel sets have a much lower weight rating so to retain the 3,500 lb tongue weight rating you will need to keep the foot pad. I recommend using the Ultra-Fab Protective...
view full answer... - Can Stromberg Carlson Trailer Jack be At Different Angle on Mounting BracketYes, if you wanted to turn the Stromberg Carlson Electric Trailer Jack # JET-3755 so that the housing was at an angle to give you more tailgate clearance you certainly could.
view full answer... - Recommended Electric Tongue Jack for a 24' Car Trailer with 10,000 lb. CapacityFor your car trailer I recommend the Stromberg Carlson Electric Trailer Jack # JET-3755. Typically, your tongue weight should be 10-15% of your total trailer weight (trailer + cargo). In other words, a 10,000-lb trailer would have a tongue weight between 1,000 lbs. and 1,500 lbs. So with the 3,500 lb. capacity of this jack you have plenty of room to spare. Since this question was asked from a A-frame jack, I am working under the assumption that is what you have. This will have a bolt-on...
view full answer... - Lippert Smart Jack Extending On Its Own. What Can I Do?Unfortunately this is a known issue with these Lippert Smart Jacks # LC643589. Water can get into the circuit board which causes the jack to extend on its own. We have contacted Lippert regarding this issue in the past and we have been told that the circuit board is not replaceable. I am sorry to say that if the issue persists, your only option will be to replace your smart jack. If you want to go with a different jack, we recommend the Stromberg Carlson Electric Trailer Jack # JET-3755....
view full answer... - Lippert Electric A-Frame Trailer Jack 1817941 Stripped Threads on Screw/NutThread damage to the screw/nut inside of a jack is usually a result of over extending the trailer jack. I'm not saying that is what happened to you but that is the cause of the majority of these situations. Is your jack still covered under warranty? If so then it may be able to be taken care of through a warranty claim. The screw/nut are not available as replacement parts. For a replacement jack I would use the Stromberg Carlson # JET-3755 electric jack that has 24" of lift rather than...
view full answer...
- Mounting Flange Diameter of Stromberg Carlson Electric Trailer Jack # JET-3755The mounting flange of the Stromberg Carlson Electric Trailer Jack # JET-3755 that you referenced is 5 inches in diameter. This would fit your application without interference.
view full answer...
- Can the Stromberg Carlson Electric Jack Part # JET-3755 Draw Power from the Vehicle's BatteryThe Stromberg Carlson Electric Trailer Jack part # JET-3755 will draw 30 amps under load. If you attached the 10 gauge power wire on the jack to the 12 volt pin on the trailer side trailer connector and the 12 volt trailer connector circuit on the vehicle was rated for 30 amps then yes, technically you could use the vehicle's battery to power the jack. However, the distance the power must travel from the vehicle's battery to the jack will put too much stress on the motor and is not recommended....
view full answer... - Will a 3,500 Pound Capacity Electric Jack Work Well on 7,500 Pound Travel TrailerYou can use a 3,500 pound capacity electric A-frame jack for your 7,500 pound travel trailer. The jack capacity does not need to match the weight of the trailer since the jack will not be lifting the weight of the entire trailer, only the trailer's weight at the tongue. Our most popular 3,500 pound A-frame electric jack is the Stromberg Carlson Electric Trailer Jack with 23 inch Lift # JET-3755. I've attached a review video of this jack for you. If you're concerned about the 3,500 pound...
view full answer... - Do Electric A-Frame Trailer Jacks Have an Industry Standard Mounting PatternElectric A-frame trailer jacks do have an industry standard mounting pattern, the mounting holes should be 3 inches on center. To be sure that your existing jack has industry standard mounting holes, you can measure the holes on your trailer to determine if they are 3 inches on center. The electric jack that you referenced, the Stromberg Carlson Electric Trailer Jack with Drop Leg # JET-3755 is a great option for your trailer. This jack offers 18 inches of lift and a 5 inch drop leg....
view full answer... - How to Install the Stromberg Carlson Electric Trailer Jack Part # JET-3755The Stromberg Carlson Electric Trailer Jack part # JET-3755 is very simple and easy to wire. So much so that they do not even provide you with a diagram. The jack grounds though the mounting hardware so the only wire you need to attach is the black power wire which will need to be ran to the positive side of the battery on your trailer with the in line fuse placed 6" from the battery. Unfortunately, none of the above can really be completely without the trailer present but the good news...
view full answer... - Trailer Jack Similar to Jack in Trailer Valet RVR Comparison VideoThe comparison video you mentioned for the Trailer Valet RVR part # TVRVR9 that you referenced actually isn't a video we shot as we got it from Trailer Valet. The powered jack in the video looks like an older version of a Stromberg jack like the part # JET-3755 but what's exactly in that video is no longer available.
view full answer... - What Is the Torque Rating of the Stromberg Carlson Electric Trailer JackI spoke with Stromberg Carlson about the Stromberg Carlson Electric Trailer Jack part # JET-3755 but they were not able to provide any sort of torque specifications for the motor. That said, I was able to get some information about the speed of the motor which is 55.5 seconds for 10" of travel with no load. I am not sure if this helps or not but most trailer jack manufactures won't have the torque figures you are looking for to compare. The Phoenix Electric Trailer Jack part # UF38-944055...
view full answer... - Where To Install Star Washers On Stromberg Carlson Camper Jack - Item # JET-3755The star washers for the Stromberg Carlson Camper Jack, Item # JET-3755, create electrical contact for the ground so they will need to be installed between the bolt and the flange so that you have a direct metal to metal contact.
view full answer... - Powered Trailer Jack Recommendation for a Trailer that with a Weight DistributionSounds like going to a higher rated electric tongue jack would be your best option. The higher rated jacks are great for using when installing a weight distribution, but there's not way exactly to know how much capacity you would need so we recommend going with the highest one just to be sure. I would recommend the Stromberg Carlson # SC63VR. This is a 4,500 lb jack that I can guarantee will have enough capacity for your setup and would be your best option. This jack has a clutch that...
view full answer...
Do you have a question about this Camper Jack?
Info for this part was:
Expert Research:
Michael H
Expert Research:
Jameson C
Video Edited:
Jacob T
Video Edited:
Dustin K
Installed by:
Cole B
Installed by:
Randy B
Video by:
Chris R
Video by:
Zach D
Updated by:
Shelly K
Updated by:
Samantha S
Updated by:
Jenny M
Updated by:
Mike S
Updated by:
Michael B
Updated by:
Matthew E
Written by:
Wilson B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Morgan
12/25/2022
Jack is still working perfectly, no issues,no complaints!