Electric Trailer Jack - Drop Leg - A-Frame - 22-1/2" Lift - 3,500 lbs
(74 reviews)
Price: $187.88
In Stock
Electric Trailer Jack - Drop Leg - A-Frame - 22-1/2" Lift - 3,500 lbs
Item # 3370093500
Retail:$207.52
Our Price: $187.88
You Save: $19.64
This item qualifies for Free Shipping
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (74)
- Q & A (0)
- Photos
- Why etrailer?
Buyers Products Camper Jacks - 3370093500
- A-Frame Jack
- 3001 - 4000 lbs
- Electric Jack
- 22-1/2 Inch Lift
- Bolt-On
- Buyers Products
- 1 Jack
Switch-operated jack has 18" of screw travel and a 4-1/2" drop leg. Retracted height is 9-1/2" and extended height is 27-1/2". 7-Way plug makes setup easy. Extends 6" in 29 seconds with 1,000 lbs of tongue weight.
Features:
- Electric jack lets you raise and lower your A-frame trailer quickly and easily
- 7-Way RV-style plug pulls power from your vehicle's trailer connector
- No need to manually wire for power
- Weather-sealed toggle switch on underside of housing extends and retracts jack for easy operation
- 2 LED lights on either side make it simple to set up your camper at night
- Red button on back of jack turns lights on
- Convenient built-in leveling gauge lets you see if your setup is level
- Integrated circuit breaker prevents motor damage
- Emergency crank (included) allows you to manually operate jack if needed
- Crank inserts into socket beneath level
- Drop leg allows for increased lift and saves time when raising or lowering
- Sturdy carbon steel construction
- Black powder coated outer tube
- Zinc-finished inner tube and footplate resist corrosion
- Easy bolt-on installation
Specs:
- Bracket height:
- Retracted: 9-1/2"
- Extended: 27-1/2"
- Total lift: 22-1/2"
- Screw travel: 18"
- Drop leg travel: 4-1/2"
- Travel speed (w/ 1,000-lb tongue weight):
- Extends 6" in 29 seconds
- Retracts 6" in 26.4 seconds
- Footplate diameter: 5-1/2"
- Outer tube diameter: 2-1/2"
- Clearance (bracket to top of level gauge): 19-1/2"
- Lift capacity: 3,500 lbs
- Motor: 12V
- Power cord length: 4'
- 1-Year warranty
How to Determine the Lift Capacity You Need in a Jack
A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball. To do this, you'll need a jack with a lift capacity high enough to handle your trailer's tongue weight.
Tongue weight is the amount of weight that your trailer applies to the back of your tow vehicle. Typically, your tongue weight should be 10-15% of your total trailer weight (trailer + cargo). In other words, a 10,000-lb trailer would have a tongue weight between 1,000 lbs and 1,500 lbs. For a trailer this size, you would need a jack with a lift capacity of at least 1,500 lbs.
It's okay to have a jack with a weight rating that is higher than your trailer's tongue weight. In fact, a jack with a higher lift capacity should operate more efficiently, allowing you to spend less time cranking and more time camping.
Trailer and Camper Jack Lift
Every jack offers a certain amount of lift or travel. Screw travel is the distance the jack extends when you crank it (or toggle it to "extend" on an electric model). Some jacks include a drop leg for extra adjustability. On these jacks, you'll see the maximum extension of the drop leg listed in the specs as well. Adding the screw travel and drop leg travel together will give you the total lift. The total lift listed above can help you determine how high this jack will be able to raise your trailer.
0093500 Buyers Products 12-Volt Electric Jack
Installation Details
California residents: click here
Customer Reviews
Electric Trailer Jack - Drop Leg - A-Frame - 22-1/2" Lift - 3,500 lbs - 3370093500
Average Customer Rating: 4.8 out of 5 stars (74 Customer Reviews)
Switch-operated jack has 18" of screw travel and a 4-1/2" drop leg. Retracted height is 9-1/2" and extended height is 27-1/2". 7-Way plug makes setup easy. Extends 6" in 29 seconds with 1,000 lbs of tongue weight.
- 3370093500
Lyle - 10/18/2021
by: Lyle10/17/2020
Shipping was fast and jack works when I plugged it into my pickup. Haven’t mounted it yet but looks like it should fit
Comments
It worked when I installed it in late fall when I hooked up to it the spring it wouldn’t work I installed a new switch and still didn’t work.
Lyle - 10/18/2021
- 3370093500
by: Michael11/10/2021
Caroline B was a great help on the phone. Placed my order with no problems with billing. Immediately received an email with tracking info that told me to expect it a day later than it arrived. I installed it and tested it within less than 5 minutes literally. Short of any unexpected problems in the future it was a pleasant experience. I will definitely use etrailer again for future needs.
- 3370093500
by: GLH05/03/2019
I love my new electric trailer jack ! It has a 7 pin RV plug which makes it so convenient to power. There are lights on both sides to shine onto the hitch after dark. There is a bubble level on top to know when the camper is at least level enough to start setting up. It all works great !
- 3370093500
by: Thelma & Louise10/02/2021
On our first try the motor stopped and would not restart. After some reading of reviews, we found out about the reset button on the back of the motor. It’s tucked away so we didn’t notice it… nor was it mentioned in the ET video or directions. We do like that the jack plugged directly into the 7-pin. Initially it took some wiggling of the plug to get a good connection. We had to really snug/squeeze it into place to maintain contact, as it seemed to have a bit of play. We should be good to go, and will update this review after more experience with the jack.
- 3370093500
by: Gary09/04/2021
The problem with this one is the level cap where the emergency crank is has three small screws you need to remove. My other two have a cap that you can remove by hand real fast.If you buy this one keep a small Philips screw driver with the hand crank. Also ALL STICKERS are peeling off do to the coating used on metal. The jack is well make metal parts seem well coated.
- 3370093500
by: Anne09/01/2021
It was a great addition to my trailer. The hookup time was about half. I am very happy with it.
- 3370093500
Anne G - 11/02/2021
by: Anne11/01/2020
works good.fast service. exactly what i ordered.
Comments
still works great
Anne G - 11/02/2021
- 3370093500
Fred M - 02/03/2021
by: Fred M02/02/2020
Use it on my enclosed car trailer to load and unload cars with low clearance, Jack works 100% satisfied, I use separate battery that I keep charged in trailer
Comments
Great wish I had purchased years before
Fred M - 02/03/2021
- 3370093500
by: Martin06/25/2021
Fits my cargo trailer perfectly. Plenty of power to lift tongue even when heavy. I am very satisfied with this product
- 3370093500
peter b - 05/09/2020
by: Peter Brent05/08/2019
Easy to install worked great first time will update if there any changes but happy so far
Comments
works good, but i do not like the idea of having to unscrew top to use manual crank , if i am right it was suppose to be a slide to side action
peter b - 05/09/2020
- 3370093500
by: Steve08/21/2021
Very low power. Use in light trailers only SLOW
- 3370093500
by: Lloyd11/12/2020
I have a Cottage trailer that I move onto a lot for the winter in Arizona and put it back into storage for the summer. This jack handles it easily. Etrailer just did a one year follow up on my Jack, so I am more than impressed!
- 3370093500
Ronald J - 06/30/2020
by: Ron06/15/2019
It's such a pleasure not having to crank the trailer off and on the truck, using this product was the best purchase I ever made to make my life easier.
Comments
For years I have owned trailers and campers that had manual jacks on them. When I bought my 16 trailer last year to carry my work related tools, I just towed around the trailer everywhere because I was too tired from taking it off and on my truck. One day a stranger was watching my struggle with taking the trailer off my truck he asked me why I dont have a motorized jack for the trailer...I never heard of such a thing until I researched it and I will never use a trailer again without an electric jack. Best investment in time saving ever.
Ronald J - 06/30/2020
- 3370093500
by: Joseph01/07/2022
Fast shipping
- 3370093500
by: Kelly06/28/2021
Great selection with good prices. Delivery took longer than originally stated by quite a bit.
- 3370093500
by: Roger L07/05/2019
Love this jack. However there was an issue connecting to my 2017 F250 SuperDuty. There is no constant 12v power to the plug to operate the Jack. I did the whole internet search and reading and dont listen to all the advice about fuses and relays. There are no fuses and or relays that are necessary. Just pull apart the 7way connector to the jack and remove the wire from 1oclock and replace to the 11oclock position and it will work fine. Before you start to look for fuses and relays just know that there is no relay connections for slot 37.
- 3370093500
by: Dan09/11/2021
Just what I needed, works great, easy to install.
- 3370093500
by: Lance G.06/06/2019
This jack works great so far! (Day 1) Except for one minor detail, everything works as described. I have a 2014 Ford F-150 with a factory hitch & 7pin plug. My fuse box did not have the 30A fuse & relay needed to power the jack. Found the exact fuse & relay needed in my glove box. Apparently Ford doesn't install them when installing the hitch & 7pin plug. Not all trailers need this power function. Mostly the fuse & relay are used to charge the battery on a travel trailer via the 7pin plug. I'm pulling a cargo trailer with no battery to charge. Once I installed the relay in slot #9 & the 30A fuse in slot #21 in the fuse box under the hood, the jack worked as described. I do wish the cable was a rubber jacketed cable instead of a split corrugated tubing. I might change that one day. Also wish the manual crank handle was slightly shorter. I have a V-nose trailer, and the manual crank handle hits the V-nose, not allowing for a complete 360 turn. The level on top is nice, but needs to twist off like some models I've seen. This model requires you to have a Phillips screwdriver to remove the level to get to the manual crank, and then try to keep up with the tiny screws. These are just some things I would change to make this product better. Overall, I'm satisfied. Time will tell how long my satisfaction lasts.
- 3370093500
by: Michael P.06/12/2019
Totally awesome. I have a bad right shoulder and it makes it difficult to crank the trailer jack. This power jack was like a 15 minute installation and with the 7 point plug already hooked up it was just too easy. The installation required the removal of the old manual jack and the install of the new power jack which required removing three bolts. This will make the upcoming deer season that much more enjoyable with the easy hookup.
- 3370093500
by: Benjamin10/31/2018
This jack is awesome! I have service connected disabilities that affect my arms and this is a lifesaver. It's as easy to install as a regular crank jack, very heavy, and I love the 7-pin plug for power. I installed it on our 3 horse v-nose trailer. I can lift the trailer and pick up the rear end of my 1/2 ton truck with ease.
- 3370093500
by: Robert11/06/2021
Works great and arrived within a matter of days.
- 3370093500
by: Gary M.08/31/2020
This has been a great investment for my camper. I did remove the connector, and wired it into my camper's 12v system to make it easier for me, but I'm very happy with this jack. It works great and saves time and (muscle) energy!
- 3370093500
by: Allen10/02/2021
Customer service was excellent shipping was quicker than I thought I’m very happy thank you
- 3370093500
by: Jim09/08/2021
Works great on our horse trailer
- 3370093500
by: Robert09/01/2021
works grate. no battery needed
25
74
Show More Reviews
Ask the Experts about this Buyers Products Camper Jacks
- Troubleshooting No Power to Buyers Products Electric Trailer JackBecause the Buyers Products Electric Trailer Jack # 3370093500 receives its' power from the vehicle's 7 way, the most likely culprit is the 12v power circuit on your 2013 Chevy Silverado. You'll want to test to make sure you're getting ~12v on the 7 way using a multimeter like the # PT89ZR at the 1 o'clock pin on the truck's trailer plug. I've linked a helpful article we did on 7 way wiring, which includes some diagrams that you might find helpful. If you can let me know what the voltage...
view full answer...
- Are Replacement Parts Available for the Buyers Products 12v Electric 3500-lb Camper Jack?You can replace the leg on the Buyers Products 12v Electric Jack # 3370093500 with the Replacement Footpad for Buyers Products 12v Electric Jacks # 3373013261 .
view full answer... - Troubleshooting Wiring of Buyers Products Electric JackThe Buyers Products 12-Volt Electric Jack - 22-1/2" Travel - 3,500 lbs # 3370093500 has a 20 amp circuit breaker and motor switch between the trailer wiring connection and the motor. I recommend checking the circuit breaker and then the switch for continuity using a circuit tester like # PTW2992. I've attached a schematic of your wiring to assist.
view full answer...
- How to Have Power to 12 Volt Circuit of 7-Way All the TimeTo do that you'd have to bypass the factory 7-way wiring of your 2016 Ford F-250 by running a length of 10 gauge wire like # 10-1-1 (sold by foot) through a breaker like # 9510 from the 1:00 pin of your 7-way to the positive post of your vehicle battery.
view full answer... - Can Electric A-Frame Jack be Powered by Tow Vehicle BatteryYou can definitely use the 7-Way on your tow vehicle to power an electric A-Frame jack. We actually carry the Buyers Products 12-Volt Electric Jack # 3370093500 which comes with a 7-Way connector installed so you can do just this very thing without having to splice into the 7-Way on your trailer. We typically say to use a trailer battery just to help prevent draining the start battery in your vehicle to the point where it won't start and you get stranded. As long as you are mindful...
view full answer... - Mounting Hardware Suggestion for Buyers Products Powered A-Frame Jack # 3370093500You can use three 3/8-16 grade 5 bolts to install the Buyers Products 12-Volt Electric Jack # 3370093500 or any other style A-frame jack; though we do not carry the hardware it is available at any hardware store. I attached an install video for this jack for you to check out as well. The length you'd need would be based on your trailer's mounting flange thickness. I attached a review video for this jack for you to check out as well.
view full answer... - Can 7-Way of Electric Trailer Jack be Cut Off and the Wiring Run to Trailer BatteryIf your electric trailer jack has a 7-Way built-into it for power, like the Buyers Products # 3370093500, then it is completely acceptable for you to cut off the 7-Way and run the power to the positive terminal on your 12V battery. Instead of running your ground to the negative terminal on your battery though I highly recommend grounding it to the frame on your trailer. This will be a much better ground option that running it to the battery. You do want to check and make sure that your...
view full answer...
- No Power on Buyers Products 3370093500 Trailer Jack When Plugged into 7-way on 2002 Ford F250If you're not getting 12V on the pin in the 1:00 position in the 7-way trailer connector, I'd suspect a blown or missing fuse. The 20A fuse that protects this circuit is in location 115 in the fuse panel located behind the panel just under the steering column. The panel is held in place by 4 fasteners, turn them counter clockwise that he panel can be removed. If the fuse was blown, you'll want to figure out why it blew and repair the issue or you'll continue to blow fuses.
view full answer... - Availability of 7-Way Extension for Buyers Products 3370093500 Powered Trailer JackExtensions are indeed available. For a 7 foot long extension, use # C56080 or for 10 foot extension use # TLW6510. I've linked you to some product description videos for the extensions I mentioned.
view full answer... - Troubleshooting No Power to Buyers 12V Electric Jack When Plugged Into Ram 7-WayThe Buyers Products 12V Electric Jack # 3370093500 referenced in your question features a pre-wired harness that is designed to plug right into the 7-Way on a tow vehicle. If the jack isn't powered at all when plugged into the 7-Way on your Ram then it's likely the 12V circuit on the connector is not active. You can use a circuit tester like # 40376 to test the pin at the 1 o'clock position at the front of the 7-Way to make sure you are getting power there. If not you may have a blown...
view full answer... - How to Connect Buyers Products 12-Volt Electric Jack # 3370093500 to Travel Trailer BatteryIf you are wanting to draw power off of the battery on your travel trailer for your Buyers Products 12-Volt Electric Jack # 3370093500 then you need to install a vehicle-side 7-Way connector like the Hopkins # HM48480 on your trailer and run some wiring. The wiring you need to run is for the power and ground functions. Simply run some 10 Gauge Wire # 10-2-1 from the power and ground pins on your 7-Way (see attached photo) and the connect the power wire to your positive battery post (with...
view full answer...
- Mounting Hole Spacing for Buyers Products 12 Volt Electric Jack # 3370093500A-frame trailer jacks including # 3370093500 use an industry standard mounting hole pattern (with very few exceptions). They are approximately 3 inches on center. Some jacks have slotted mounting holes which is why the measurements are approximate (it could be a little more or a little less than 3 inches on center).
view full answer... - Best Way To Gain Tailgate Clearance With Electric Trailer JackThere are other ways to help gain tailgate clearance, but disassembling the electric jack # 3370093500 is not the solution. I would recommend getting the 180 Hitch 2-Ball Mount w/ Stainless Steel Balls For 2" Hitches # LTB6-2 because it has a 6" Drop, 7" Rise and is rated for 12.5K lbs. This will help you get your tailgate down on your 2016 Ram 1500 so you don't have to worry about denting it.
view full answer... - Powered A-Frame Jack that Plugs into 7-Way for PoweringOne easy solution for powering an A-frame jack on a trailer without a battery is a powered jack that draws power by plugging into a 7-way with an active 12 volt circuit like the Buyers Products Electric Jack part # 3370093500.
view full answer... - Does Buyers Products Powered Jack Fit Under Lippert Jack It Bike RackYes the Buyers Products 12-Volt Electric Jack - 22-1/2 Travel - 3,500 lbs jack # 3370093500 that you referenced would fit under your Jack-It # LC429756.
view full answer... - Electric Trailer Jack Recommendations for a 2014 Coleman 262BH CamperBased on the size of your 2014 Coleman 262BH camper, I recommend going with a jack rated for 3,500 lbs. This is the most common size electric jack out there, so the good news is you have quite a few options. Keep in mind, the jack does not have to be rated for the weight of your trailer because it is only lifting the tongue weight of your trailer, but I will admit that jack weight capacities really don't make much sense for trailer tongue weights or gross vehicle weights. It looks like...
view full answer... - How to Power A-Frame Trailer JackYou can either power the Stromberg Carlson Electric Trailer Jack # JET-5000 by adding a 12V battery to your trailer or by connecting it to the 12V power pin (11 o'clock position) on your trailer side 7-Way and then ground the white wire to the frame of the trailer. If you don't already have a 7-Way on your trailer I recommend the Upgrade Kit # e99011 which really helps to simplify your connections and keeps them clean. If you want something more simple then we have the Buyers Products...
view full answer...
- Wiring Electric Jack to Plug Into 7-Way on Tow Vehicle Although wiring an electric jack like the etrailer.com # EJ-3520-BBX you referenced to a dedicated battery on the trailer is the preferred solution for ensuring you get the needed power, you can indeed wire it to a 7-Way plug like # A7WCB for it to be connected to the 7-Way on your truck when needed. If you don't yet have an electric jack, we actually have a 3,500 pound unit available with the Buyers Products # 3370093500 that is designed to be used this way right out of the box. This...
view full answer... - Recommended Electric Trailer Tongue Jack for Fleetwood Sedona Pop-UpYes, I don't see any reason you could not install an electric trailer tongue jack on a Fleetwood Sedona. For this, I recommend the Electric Jack w/ Footplate part # e49ZR which has a wireless remote, integrated LED, and an emergency crank handle. It will be a direct bolt-on swap, you'll just need to run the power wire to the battery. Please note, if you don't have a battery on the trailer you can power the jack through the trailer connector with an option like the Electric Trailer Jack...
view full answer... - Can a Breakaway Battery be Used to Power an Electric A-Frame Trailer JackIf your breakaway system is powered by its own battery then it is likely a 5 amp hour battery which is not high enough to power an electric trailer jack, such as # BD500199, since they can draw about 30 amps under load. The other issue is that a breakaway system needs its own dedicated battery and should not be shared by other 12 volt accessories. If your trailer has a 7-Way trailer connector with functioning 12 volt circuit you could use electric jack # 3370093500 which plugs into a...
view full answer... - Can the Electric Jack w/ Footplate # EJ-3520-BBX be Connected to 12V Circuit on 7-WayYou can use the 12V circuit on your 7-Way to power the Electric Jack w/ Footplate # EJ-3520-BBX but it is usually best to use a separate 12V battery that is stored on your trailer. Reason being that sometimes the trailer jack needs more power than the 12V wire from your tow vehicle can deliver. Is it possible, yes, but if that isn't enough power you will need to add a battery to your trailer. We do have the Buyers Products Jack # 3370093500 which you can plug right in to your 7-Way...
view full answer... - Troubleshooting Electric Trailer Jack with 7-Way Plug That Does Not Function ConsistentlyAn electric A-frame tongue jack like # EJ-3527-BBX or # 3370093500 that has a pre-wired 7-way plug will rely on the ground and +12V contacts within that plug to deliver operating power. Jacks may not function with less than 12 volts. Those contacts are located, respectively, at the 5:00 and 11:00 positions on the plug as you look at it. Please refer to the linked photo. You might try an aerosol electrical contact cleaner like Caig De-Oxit to see if that restores reliable operation. I...
view full answer...
- What Size Battery Should be Used to Power Bulldog Electric A-Frame Trailer JacksA standard car battery will work to power Bulldog trailer jack # BD500199. The battery will need to have an amp hour rating greater than 30 amps which is the max current draw of most electric A-frame jacks. Other option is to use jack # 3370093500 or # UF38-944037 provided your tow vehicle has a 7-Way trailer connector with functioning 12 volt circuit. Both of these jacks are powered through the 7-Way so no battery is required on the trailer to run the jack. I have linked videos for...
view full answer... - Compatibility of Ultra-Fab Manual Crank Adapter with Buyers Products Electric JackThe Buyers Products 12-Volt Electric Jack - 22-1/2" Travel - 3,500 lbs # 3370093500 manual crank has dimensions that are 5/16 inch wide and 1/4 inch deep. The Ultra-Fab Manual Crank Adapter for Powered Jacks # UF38-001020 has slot dimensions that are 5/16" wide x 3/8" deep so it will work well with the Buyers Products jack. This adapter makes a 1/2 inch socket usable so you can use a ratchet for your manual crank.
view full answer... - Electric Trailer Jack Replacement Recommendation for Tandem Axle Boat TrailerI recommend going with the Electric Jack w/ Footplate # EJ-3520-BBX for your 1996 TrailRite because it is a solid choice that meets your specs at a good price. This installs on your A-Frame and is powered by splicing into battery power whether that's directly from a battery on your trailer or if you'll have it pulling power from the 7-Way on your tow vehicle. If you don't have a battery on your trailer or even a 7-Way installed on it either then you might be interested in the Electric...
view full answer... - Replacement Foot Pad for Buyers Products 12V Trailer Jack # 3370093500 I do have a solution for you, however the Replacement Foot Pad # 2500-3755G referenced in your question is designed specifically for certain electric jacks made by Stromberg Carlson so I cannot confirm if it will work well for your existing jack. For your 12V Electric Jack # 3370093500 (part 0093500 from Buyers Products) you will need the Replacement Foot Pad # 3373013261. This will work perfectly for your jack and is exactly what the jack would have originally been equipped with.
view full answer... - Can I Use My 12 Volt Circuit From My Vehicle Wiring To Power My Electric Jack.Yes you can splice in to the power wire on your (vehicle end) 7-WAY and that will work. Or you could add a connector like the 7-Way Molded Connector w/ 10' Cable - Trailer End # 50-67-005 to the connector on the Electric Jack w/ Footplate - Drop Leg - A-Frame - 25-1/8" Lift - 3,500 lbs - White EJ-3520-WBX and plug it directly into your truck's 7-way when using the jack. Then it will work for you. We also have the Electric Trailer Jack - Drop Leg - A-Frame - 22-1/2" Lift - 3,500...
view full answer... - 3500 lbs Powered Jack for a 2015 Keystone Passport Ultra Light I have a great power jack for your 2015 Keystone Passport Ultra Light exp171. It is the Buyer's Products Electric Trailer Jack item # 3370093500. This jack has a 3,500 lbs weight capacity and would be perfect for your travel trailer. It comes with a 7-Way RV-style plug that pulls power from your vehicle's trailer connector to operate the jack. It has a retracted height of 9-1/2" and an extended height of 27-1/2".
view full answer...
Do you have a question about this Camper Jack?
Why etrailer.com?
At etrailer.com we guarantee:Highest quality camper jacks for the best price.
Our Lowest Price Pledge ensures you will never overpay for the parts you need.Real product know-how.
We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.Most detailed, accurate camper jack information available.
Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.Installations, made easy.
We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.Fast shipping.
Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.Personalized service for life.
We provide one-on-one, personalized service from the ordering process through the life of your product.Trusted since 1946.
We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.Returns Policy
Need to return an item? No problem. Please read our Returns Policy for more information.
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Edited by:
Lindsey S
Video Edited:
Joshua S
Installed by:
Cole B
Installed by:
Randy B
Updated by:
Wilson B
Updated by:
Mike S
Updated by:
Mark S
Video by:
Zach D
Written by:
Kristina F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 800-298-1624
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.