1. Camper Jacks
  2. Fulton
  3. Stabilizer Jack
  4. Drop Leg Jack
  5. 2001 - 3000 lbs
  6. Weld-On
Fulton Drop-Leg Stabilizer Jack with Mounting Channel - Weld-On - 28" Leg - 13" Bracket -

Fulton Drop-Leg Stabilizer Jack with Mounting Channel - Weld-On - 28" Leg - 13" Bracket -

Item # FSJ1-SJ2
lowest price pledge
Our Price: $120.70
Camper Jacks
This item qualifies for Free Shipping
Shipping Weight: 10 lbs
Quantity: 
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Videos

Need help with installation?
Locate installers near me
For quick load leveling and stabilizing; ideal for cargo trailers, industrial implements and equipment outriggers. This drop-leg jack features high-strength structural steel tubing and corrosion-resistant zinc plating. Call 800-298-1624 to order Fulton camper jacks part number FSJ1-SJ2 or order online at etrailer.com. Free expert support on all Fulton products. Guaranteed Lowest Price and Fastest Shipping for Fulton Drop-Leg Stabilizer Jack with Mounting Channel - Weld-On - 28" Leg - 13" Bracket -. Camper Jacks reviews from real customers.
  • All Info
  • Reviews (64)
  • Q & A (6)
  • Videos (1)
  • Photos
  • Why etrailer?

Fulton Camper Jacks - FSJ1-SJ2

  • Stabilizer Jack
  • Drop Leg Jack
  • 2001 - 3000 lbs
  • Weld-On
  • Fulton
  • 1 Jack

For quick load leveling and stabilizing; ideal for cargo trailers, industrial implements and equipment outriggers. This drop-leg jack features high-strength structural steel tubing and corrosion-resistant zinc plating.


Features:

  • Drop-leg jack is great for quick load leveling and stabilizing
    • Once welded to the trailer, pull the pin to lower the drop leg and reinsert it to keep the leg in place
  • Zinc plating offers corrosion resistance
  • Steel construction is strong and durable
  • Kit includes outer tube with oil finish and square drop leg with adjustment holes
  • Weld-on installation


Specs:

  • Drop-leg length: 28-3/4"
  • Height adjustment range: 25" - 37"
  • Outer tube dimensions: 2" wide x 13" long
  • Capacity: 3,000 lbs


SJ1-SJ2 Fulton Drop Leg Stabilizer Jack Kit, 25" to 37" Range





Video of Fulton Drop-Leg Stabilizer Jack with Mounting Channel - Weld-On - 28" Leg - 13" Bracket -

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Fulton Camper Jack - Stabilizer Jack - FSJ1-SJ2 Review

Today we're going to be taking a look at the Fulton Drop-Leg Stabilizer Jack with Mounting Channel. The drop-leg jack is great for quick load leveling and stabilizing. Once this piece right here is welded to the trailer frame, all you have to do is pull out the included pin and clip and then you can lower that drop leg and get it adjusted to wherever you need it. Once you have it set, simply line up the holes, place in the pin and secure it with the clip. Really nice, easy to use design. The drop-leg is going to be made from a steel construction.

That's kind of a zinc plating, so that's going to do a great job at resisting rust and corrosion. The outer tube is a steel construction as well. It is ready for welding. The kit's going to include your outer tube, your drop-leg, and the adjustment pin. Again, it is a weld-on installation. Capacity is 3,000 pounds.

The drop-leg length from the bottom of the foot plate to the very top of the drop-leg tube is 29 inches. The outer tube, that's this piece right here, that's a two-inch by two-inch tube. It measures 13 inches long. The drop-leg tube measures 1 3/4 inch by 1 3/4 inch, so that's a square design as well. Now, it does have the foot plate that's already pre-welded to it.

That's going to do a great job at spreading out the applied weight, especially on softer surfaces to help prevent sinking. It's going to measure about 7 1/2 inches long by 3 7/8 of an inch wide, so it's a nice large design. A few other things that I want to mention for you real quick, you'll notice that you're going to have a bottom hole right here. That's going to be the fully stowed or travel position. You're going to have multiple adjustment holes. The distance between the top adjustment hole and the bottom adjustment hole is 16 inches on center, and then the incremental height adjustment center on center is two inches.

The distance between this hole right here and the travel position hole, that's going to measure 7 1/4 inches apart on center. From the center of the lowest adjustment hole to the bottom of the foot plate is nine inches. From the center of the top adjustment hole to the bottom of the foot plate is 25 inches, and then from the center of that stowed position hole or travel position hole to the bottom of the foot plate's going to be 1 3/4 of an inch. Again, really nice, easy to use design. This piece gets welded on to the trailer frame and then that drop-leg can slide inside of that outer tube and it's just very easy to adjust, and it's just a very quick, efficient way for leveling and stabilizing. That's going to do it for today's look at the Fulton Drop-Leg Stabilizer Jack with the included weld-on mounting channel.


Customer Reviews

Fulton Drop-Leg Stabilizer Jack with Mounting Channel - Weld-On - 28" Leg - 13" Bracket - - FSJ1-SJ2

Average Customer Rating:  4.8 out of 5 stars   (64 Customer Reviews)

For quick load leveling and stabilizing; ideal for cargo trailers, industrial implements and equipment outriggers. This drop-leg jack features high-strength structural steel tubing and corrosion-resistant zinc plating.

- FSJ1-SJ2
by:

Installation photo



- FSJ1-SJ2
by:

Simple is the key. Nice product and super simple.Drop them down in back and raise your jack a bit and you are stable. Well maybe you aren't stable but your trailer is. No handles to get in the way or lose. Nothing to catch on a low spot and rip off (don't ask me how I know under mount stablizers can be torn off.) These guys are great to buy from. Shipping was super fast and their web site even demonstrates most products. FANTASTIC!!!!!



- FSJ1-SJ2
by:

Fulton drop down stabilizer jack was just what I needed to stabilize a military surplus M1102 trailer. Because the M1102 trailer is aluminum except for the frame the lifting support tubes were utilized along with an extra outer tube to slide into the frame of the trailer. Great products folks, Thanks again.



- FSJ1-SJ2
by:

welded to front of a 3 ton chipper to help the load on the crank jack worked great chipper is very stable


Comments
working out great keeps chipper very stable
Steve - 10/18/2017



- FSJ1-SJ2
by:

Received product very quickly, packaged well, can't wait to get it mounted to the trailer. It's a heavy duty design and it's not a lightweight unit. My only concern is that it only came with a 3/8" safety pin when the holes are over .5".



- FSJ1-SJ2
by:

This will work perfectly on my overlander trailer...once I get it installed, ha.



- FSJ1-SJ2
by:

Ordered stabilizers and one part was missing. Called seller --very courteous and friendly--immediately sent missing part. great to deal with .



- FSJ1-SJ2
by:

We ordered these for our off-road trailer which needed considerable height to stabilize. These are well-built and ideal for our purposes! Rather than weld the sleeve, we opted for square u-bolts and simply painted the sleeve to match the trailer. Fast shipping and a great product!



- FSJ1-SJ2
by:

Ok



- FSJ1-SJ2
by:

Solid, well built and well priced



- FSJ1-SJ2
by:



- FSJL80300
by:

Review from a similar Drop-Leg Stabilizer Jack in Camper Jacks


The "Drop-Leg Stabilizer" works great! I needed a way to stabilize my cord wood hauling trailer when loading it up. The Legs are very sturdy. The channel portion (which is welded to the trailer frame) will need to be painted to avoid rusting. Overall - very pleased.



- FSJ1-SJ4
by:

Review from a similar Drop-Leg Stabilizer Jack in Camper Jacks


Good quality drop leg and tube. But the pin is undersized for the hole. 1/2" hole with 5/16" pin, a lot of slop. Easily fixed with a new pin but should've been supplied with the correct pin.



- FSJ1-SJ4
by:

Review from a similar Drop-Leg Stabilizer Jack in Camper Jacks


Locking pins need to be next size bigger. Overall quality was excellent.



- FSJ1-SJ4
by:

Review from a similar Drop-Leg Stabilizer Jack in Camper Jacks


Works the best



- FSJ1-SJ4
by:

Review from a similar Drop-Leg Stabilizer Jack in Camper Jacks


I found this product to be very good quality and I am completely satisfied with it.



- FSJL80300
by:

Review from a similar Drop-Leg Stabilizer Jack in Camper Jacks


I welded a pair of these onto my 6 x 12 tandem axle trailer near the rear end to add support when loading heavy equipment. They do what they are intended to do. I knocked one point off because I had to drill drain holes in the bottom center myself, and then get some zinc cold galvanizing paint to treat the new holes. It would have been so easy for the manufacturer to include drain holes since they already punched some random holes in the base plate (just not in the center where they were needed to drain). they do appear to have a grade 8 galvanization on them, but if you are installing them where water can get in them, make sure to add drain holes. I'm at a loss as to where one might use these where water wouldn't get into them.



- FSJ1-SJ4
by:

Review from a similar Drop-Leg Stabilizer Jack in Camper Jacks


Product arrived quickly and had adequate packing. They were easy to install on my trailer and were easy to use. The stands appeared to be of sufficient size and strength, however the pins that were provided were quite cheap. I purchased heavier securing pins to help secure the height adjustment. They resolved my problem and secured my trailer during the loading and unloading process. I would have given an excellent rating, but the fact that I needed to purchase pins that matched the hole diameter, lowered the rating.



- FSJ1-SJ4
by:

Review from a similar Drop-Leg Stabilizer Jack in Camper Jacks


Awesome product. They work well on my dump trailer when I load heavy equipment into the trailer. Easy weld on application and very strong.



- FSJ1-SJ4
by:

Review from a similar Drop-Leg Stabilizer Jack in Camper Jacks


Very well made drop legs. They should work out great for my application.



- FSJL80300
by:

Review from a similar Drop-Leg Stabilizer Jack in Camper Jacks


This is the same product that I had on another trailer which is now 13 years old. It worked perfectly but did exentually rust some. I will probably drill a hole in the base plate to allow water to drain out of the square tube or have a plate welded over the top.



- FSJL80300
by:

Review from a similar Drop-Leg Stabilizer Jack in Camper Jacks


First time I ordered anything from e-trailer.com. Found exactly what I was looking for. The price was about right. Minutes after I placed my order(s) I received a phone call verifying the quantity, since I had placed two orders back to back for the same thing, I appreciated that.



- FSJL80300
by:

Review from a similar Drop-Leg Stabilizer Jack in Camper Jacks


support is well made. great for my 6x12 utility trailer. my ordered was packaged excellently.



- FSJ1-SJ4
by:

Review from a similar Drop-Leg Stabilizer Jack in Camper Jacks


Put these support Jack's on my trailer last week wow what a difference in stability when loading thank you you carry a great product



- FSJ1-SJ4
by:

Review from a similar Drop-Leg Stabilizer Jack in Camper Jacks


Look excellent and stout. I'll get them on my trailer ASAP to keep it level when loading my tractor. etrailers service was excellent and I received these in 3 days. I was expecting to take a week so they evidently were on it immediately. This is the type business I want to deal with! Rusty


27
66
Show More Reviews

Ask the Experts about this Fulton Camper Jacks

  • Weight Capacity of Fulton Drop-Leg Stabilizer Jack # FSJ1-SJ2
    The Fulton Drop-Leg Stabilizer Jack with Mounting Channel # FSJ1-SJ2 referenced in your question features a 3,000 pound weight capacity for a single leg. Using 2 of the stabilizer jacks would give you a combined capacity of 6,000 pounds like you mentioned. This jack includes 1 stabilizer so you if you need a pair you will just need to order 2. I have attached a short video demonstration that you can also check out.
    view full answer...
  • Measurement of Drop Leg of the Fulton Drop-Leg Stabilizer Jack with Mounting Channel
    The inner leg of the Fulton Drop-Leg Stabilizer Jack with Mounting Channel # FSJ1-SJ2 has an outer measurement of 1-3/4 inches. If you're looking to purchase just the drop leg it's part # FSJ20324
    view full answer...
  • Availability of 24 Inch or 30 Inch Stabilizer Jack
    It sounds like you are looking for a drop-leg stabilizer like the Fulton # FSJ1-SJ2. This particular stabilizer jack featurs a drop-leg length of 28-3/4 inches, with height adjustments between 25 inches and 37 inches. It has a weight capacity of 3,000 pounds and a durable zinc plating that will provide corrosion resistance. This is the closest drop-leg model we have available to the dimensions you provided. Atwood was bought out and their parts have since been discontinued by the manufacturer....
    view full answer...
  • Fulton Drop-Leg Stabilizer Jack with Mounting Channel Installation
    I looked up your invoice and the Fulton Drop-Leg Stabilizer Jack with Mounting Channel # FSJ1-SJ2 you purchased can be welded wherever best fits your application. The outer tube can be welded to your 6 inch square tube frame wherever it suits you. You will want to account for the stowed position and the amount of drop you need. I recommend welding the full 6 inches of your frame where the outer tube makes contact with it for best function and strength.
    view full answer...
  • Drop Down Stabilizer Jack for Trailer That is 25 Inches From Ground
    There are a couple of options for drop-down stabilizer jacks for your trailer that is 25" from the ground. For a drop-down leg that is a weld-on application that has the dimensions you need there is the Fulton Drop-Leg Stabilizer Jack with Mounting Channel # FSJ1-SJ2. This is a 28-3/4" leg that has a height adjustment range of between 25" and 37" so it has the dimensions you need. Another option is a bolt-on scissor jack, which aren't drop legs, but they will help stabilize your trailer....
    view full answer...
  • Is Fulton Drop-Leg Stabilizer Jack with Mounting Channel Sold Individually or In Pairs
    The Fulton Drop-Leg Stabilizer Jack with Mounting Channel # FSJ1-SJ2 is sold individually. If you needed a pair you would need to order a quantity of 2.
    view full answer...

Do you have a question about this Camper Jack?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality camper jacks for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate camper jack information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Jameson C
Expert Research:
Jameson C
Employee Cole B
Installed by:
Cole B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 800-298-1624