Videos
for Snow Plow
Help Articles
for Snow Plow
Expert Answers
for Snow Plow
Hey Bob, thanks for reaching out! We know the EcoHitch Hidden Front Mount Trailer Hitch Receiver #EH87SR will fit your 2023 Ford F150 Lightning because we've had another customer send in a photo with it installed on their Lightning (see attached…
view full answer...For your 2006 Honda Ridgeline, the K2 Avalanche plow is only a fit for the front mounted receiver. The custom mount brackets #K286110 are not a direct fit for your Avalanche plow but the mount does come with a crossbar and I've attached the photo…
view full answer...To install the Detail K2 Storm II Snowplow - 84" #K2STOR8422 on your 2002 Ford F-150 you have to use the mount kit part #K281511 which is a confirmed custom fit for your truck and designed to be used with this plow.
view full answer...Hi Winston; there are two options to mount a snow plow on your 2010 Ford F-150 FX4. If you want to use the Detail K2 Summit II Snowplow #K2SUMM8826 you looked at you will need the Custom Mounting Brackets for Detail K2 Snowplows #K281521. The…
view full answer...Hey Kurt, yes the correct gap for SumoSprings Solo kits like the part #SS88UV is 1/2 inch to 1 inch like you mentioned. Did you install this already?
view full answer...In order to use the Detail K2 Storm II Elite Snowplow part #K2STOR8422ELT on a 2002 Ford F-150 2WD you'll need the Custom Mounting Brackets for Detail K2 Snowplows part #K281511.
view full answer...Hey Bruce! The support bar mounting issue you pointed out is why I am going to steer you away from using the Curt Front Hitch item #31302 to attach a snow plow on your 2006 Yukon. Those support bars on the SnowBear Snowplow item #K2AVAL8219…
view full answer...We have front suspension enhancement that fits your 2000 Ford F-150, but we do not have anything from SumoSprings. The only option we have is the Timbren kit part #TFF150972 which will fit and work well.
view full answer...It is likely you can avoid the drain line when installing the MORryde X-Factor Crossmember for Standard Frame Hangers #MR33WR by using the MORryde X-Factor Crossmember Adapter Kit for Drop Down Applications #MR43WR. I don't know exactly the…
view full answer...If you have a front hitch installed ono your 2018 Chevy Silverado 3500 then you would not need anything else to use the Detail K-Summit Plow part #K2SUMM8826ELT that you referenced. If you do not have a front hitch we have the Curt part #C31071 that…
view full answer...Hi Jordan, Ok, I think I can clear this up for you, and just to get the final answer for you, the maximum COMBINED weight a cargo carrier and its luggage can weigh in your current setup is 175 lbs (also, apologies for the caps but they don't…
view full answer...To install the Curt Hitch part #C31068 on your 2014 Ford F-150 with Ecoboost you will need to remove the air dam and then trim a small section of the lower fascia. See photo.
view full answer...Search For Custom Fit Toyota Accessories
Select A Category Below
Towing
Cargo Control
Performance Accessories
Vehicle Trim
Jeep Accessories