What is Correct Gap for SumoSpringsi Kit to Have

Question

Question:

2024 f150 XLT w/tow pkg. 1FTFW3L82RFB36068 I understand that the “gap” when unloaded should be 1/2” to 1”. Is this correct?

asked by: Kurt R

0

Expert Reply:

Hey Kurt, yes the correct gap for SumoSprings Solo kits like the part # SS88UV is 1/2 inch to 1 inch like you mentioned. Did you install this already?

expert reply by: Jameson C

0

Kurt R.

8/5/2025

No. The instructions look clear. I don’t think I’ll have an issue.

Jameson C.

8/5/2025

@KurtR Yeah it's pretty simple. I think you won't have any issues.

Answer 1

Good question, and for occasional trailer towing on your 2023 Ford F-150 the best SumoSprings are going to be the 1,000 lb springs, with the correct fit for your truck being the following: - SumoSprings Solo Custom Helper Springs #SS88UV The 1,000 lb…

view full answer...

Answer 2

I recommend using the 1,000LB SumoSprings Solo Custom Helper Springs #SS88UV on your 2023 Ford F-150. Since your weight distribution hitch is redistributing most of the tongue weight from your trailer across your truck they will not have as much…

view full answer...

Answer 3

Hey Juan, good question. With a 955 lb tongue weight and a 34' trailer, I’d steer you toward the 1,500 lb SumoSprings. Even with a weight distribution hitch helping spread that load, you’re still putting a good amount of weight on the rear…

view full answer...

Answer 4

Hi Michael! To pull an 8,000 pound trailer (safely) with your 2019 Ford F150 with the 5.0 V8, I recommend grabbing one of the following systems: Fastway e2 Weight Distribution w/ 2-Point Sway Control - Trunnion - 10,000 lbs GTW, 1,000 lbs TW…

view full answer...

Answer 5

To add a set of SumoSprings to your 2021 Ford F-150, I recommend the SumoSprings Solo Custom Helper Springs item #SS88UV. These springs replace your rear bump stops and provide you with an additional 1,000 lbs of support. I have linked an…

view full answer...

Answer 6

Hi Jose, That's a great question. The Air Lift LoadLifter 5000 #AL47PD actually helps reduce bottoming out when you're towing or hauling by providing additional support to the rear suspension. Since you mentioned removing a previous air bag…

view full answer...

Answer 7

Hello Dan, Great question. When you’re comparing the Firestone kits #F59VV and #F2582, they both technically fit your 2025 F-150, but they are designed around different mounting locations and truck configurations. The #F2582 is the traditional…

view full answer...

Answer 8

Hey Gregory, that's really good information. You’ve got a few options, but I wouldn’t jump straight to replacing the leaf springs on a half-ton for that size trailer. Since you’re using a Curt weight distribution hitch, that should be doing most…

view full answer...

Answer 9

Hello Wendy, thanks for reaching out. We do offer Sumo Springs Custom Helper Springs for the Mercedes-Benz Sprinter 2500. What year was your sprinter van made? Is it 4WD or 2WD? Let me know and I am happy to look into it and make sure you get the…

view full answer...

Answer 10

Hello Mark, Great question, happy to help you make a decision between the Torklift and the RAS. For your 2024 Nissan Titan XD Pro-4X with a slide-in camper and running right up at your payload limit, I would recommend the TorkLift StableLoad…

view full answer...

Answer 11

I checked with SuperSprings, and yes, they do indeed fit for your 2022 Ford F-150 Tremor. Between the two capacities, I do recommend the 1,000 lb option, which is the following part number: - SumoSprings Solo Custom Helper Springs #SS88UV Since you…

view full answer...

Answer 12

I appreciate the time you've spent researching all the different products; I'm happy to offer you my expert recommendation to facilitate your purchasing decision. The Curt E16 5th Wheel Trailer Hitch - Slide Bar Jaw - 16,000 lbs #C16115 and…

view full answer...

What is Correct Gap for SumoSpringsi Kit to Have

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching