Will MORryde X-Factor Crossmember Adapter Kit for Drop Down Allow Avoiding Drain Line  

I reached out to MORryde for you and obtained the information that you requested for the MORryde X-Factor Crossmember Adapter Kit for Drop Down Applications part #MR43WR. I assume you're trying to clear some sort of drain line and if…

Thanks for the pictures! Since your 2022 Grand Design Reflection 303RLS came with the CRE3000 equalizers you will need three of the MORryde X-Factor Crossmember item #MR33WR. It looks like you have the standard 3" wide frame hanger so all of…

Yes, we do we just have it under a different part number. It is the MORryde X-Factor Crossmember for Standard Frame Hangers item #MR33WR. This is the crossmember that works with the CRE 3000 equalizer.

The MORryde X-Factor Crossmember part #MR33WR is designed for standard suspension so that is the one you will need to use. If your leaf spring hanger brackets are wider than 3" then you will need to drill per the instructions which I have…

I spoke with MORryde and they said that the MORryde X-Factor Crossmember for Standard Frame Hangers #MR33WR will work just fine with your frame hangers with gussets. You'll just need to use the circled items attached in the image below and…

You can use that upper hole on your hanger to install the #MR33WR. Make sure you don't tighten it down too much or you will pinch the leaf spring and it won't function properly. You will also need to make sure you have enough room to install…

5The MORryde X-Factor Dropdown Crossmember for Stock Leaf Spring Suspension part #MR84AR is designed for applications with obstructions on the frame like gas or water lines. I can't really confirm fit on any one particular trailer but I have…

The MORryde X-Factor Crossmember part #MR33WR attaches to the leaf spring hangers which are located in-between and in the front and rear of each axle. I have attached a photo below to clarify. Therefore, you'll need three for full support on a…

Outstanding, thanks so much for the photos, they were really helpful. What it shows is that your 2022 Keystone Cougar 30BHS travel trailer does have stock suspension with a standard equalizer, and we do have the correct X-Factor Crossmember for you,…

Yes, we do have a triple axle Roadmaster Comfort Ride kit for 8k axles with the part #RM-2460-2580-3 which is for 3 inch diameter axles. Since you have 7k Dexter axles that would mean you have 3 inch diameter axles. This would make a huge difference…

The correct crossmember support depends on the suspension you have on your 2015 27.5 ft. Jayco 5th wheel. Unfortunately that is not information we have, so you will need to take a look at your suspension to pick the correct option. I have listed the…

From the top of the bracket of the MORryde X-Factor Dropdown Crossmember #MR84AR down to the top of the crossmember measures 4 inches.