View Cart

Toyota Tundra Brake Controller

Select Vehicle Year

  
Brake Controller

Available Years for Toyota Tundra Brake Controller


Brake Controller

Brake controllers are an essential part of a towing system with electric trailer brakes, and they offer a much-needed emergency braking feature. We offer high quality controllers from manufacturers such as Draw-Tite, Tekonsha, Valley, Hidden Hitch and Hopkins. Featuring both time-delay and proportional models, we have the right controller for any application. Brake controller wiring adapters are available for many vehicles, allowing for simple plug-and-play installation. Hardwire kits are also available to make any installation hassle-free.

Find your custom fit brake controller wiring adapter for a plug-in application by selecting the year of your vehicle to the left. We offer custom fit plug in adapters for many of the most popular vehicles, including Ford, Chevrolet, Dodge, GMC, Nissan, and Toyota.





Brake Controller Manufacturers


Search For Custom Fit Toyota Tundra Accessories
Select A Category Below



Toyota Tundra Brake Controller Videos

Curt Echo Mobile Trailer Brake Controller Installation - 2004 Toyota Tundra

Today on our 2004 Toyota Tundra we're going to be taking a look at the Curt Echo. This is a proportional brake controller designed to work with one or two axles. Now, the Echo's going to come in really handy for a lot of different situations. Maybe you're not very mechanically inclined and you don't want to go through the install process of a traditional brake controller. This simply plugs in between our truck and our trailer, gives us everything we need, works like a traditional brake controller would, using our smart phone. There are other reasons that we'll turn to this, too.



Trailer Brake Controller Installation - 2007 Toyota Tundra

Speaker 1: Today on our 2007 Toyota Tundra, we're going to be taking a look at and showing you how to install the Tekonsha Prodigy P3 Proportional Trailer Brake Controller for one to four axles, part number 90195. To help us get that installed, we're going to be using the Tekonsha Plugin Wiring Adapter, part number 3040-P. This is what our brake controller looks like when it's installed. What this is going to be good for, it's going to allow you to apply the brakes in your trailer whilst being towed. In turn, saving the brakes in your truck so it doesn't have to stop the trailer, the trailer's going to be able to slow itself down.These arrows right here on the left side, these are going to be your gain setting. You can see it goes up to 14 and goes all the way down to zero.



Trailer Brake Controller Installation - 2007 Toyota Tundra

Speaker 1: Today on our 2007 Toyota Tundra, we're going to be taking a look at, and showing you how to install the Tekonsha Voyager proportional trailer brake controller for one to four axles, part number 39510.To help us get that installed, we're going to be using the Tekonsha plug-in wiring adaptor, part number 3040-P.This is what our brake controller looks like when it's installed. This is going to be a proportional brake controller. What that means is it's going to have a sensor inside that going to detect the deceleration of your Tundra, and it's going to send the appropriate amount of force to our trailer brakes. For instance, if we're in an emergency situation and we have to slam on our brakes in our truck, the sensor is going to immediately send that signal to our trailer brakes to match the amount of force being applied so that our trailer can slow itself down, in turn saving the Tundra's brakes, because it's not going to have to slow or stop both the truck and the trailer.Now this is going to be a pretty simple, straight-forward brake controller. It's not going to have any screens or anything like that to look at. It simply has a light that will change colors depending on how you have it set.This know here on the right, this is going to be your gain.



Trailer Brake Controller Installation - 2007 Toyota Tundra

Speaker 1: Today on our 2007 Toyota Tundra, we're going to be taking a look at and showing you how to install the Tekonsha Primus IQ trailer brake controller for one to three axle, part number TK90160. To help us get that installed, we're going to be using the Tekonsha plugin wiring adapter, part number 3040-P.This is what our brake controller looks like when it's installed. What this is going to be good for is this is going to help you apply brakes to your trailer while you're traveling, in turn saving the brakes on your truck. This is going to be a proportional brake controller which means that the braking force applied in the truck will be matched on the trailer. For instance if we have a quick braking situation and you apply the brakes in your truck, the same amount of force will be applied to the trailer brakes so that the trailer will stop itself instead of the truck having to stop both.Now how this is going to differ from a time delayed, on a time delayed brake controller, when you apply the brakes in the truck it's going to take a few seconds for the brakes to be applied in the trailer. This is just the opposite.



Draw-Tite I-Command Trailer Brake Controller Installation - 2005 Toyota Tundra

Speaker 1: Today on our 2005 Toyota Tundra, we're gonna be taking a look at, showing you how to install, the Draw-Tite I-Command Trailer Brake Controller, for 1 to 4 Axles, part number 5535. Now, to help us in our installation we're also gonna be using the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers for Toyotas and Lexuses, part number 3040-P.So here's what our break controller looks like when it's fully installed. Now, our break controller is proportional, which means it's gonna apply our trailer breaks in the same intensity that our vehicle is slowing down. It's gonna do that because there's an inertia sensor inside, so when our vehicle starts to slow down, that sensor is gonna realize how much we're slowing down, apply our trailer breaks accordingly. Now, it's also gonna feature a manual override, in case you ever need to have a time where you need to apply the trailer brakes without applying the brakes on your truck. You can grab this lever, and if we start rotating it to the side, it will apply the maximum amount of breaks if we have it all the way over.Now, our gain setting is gonna be these gray buttons right here, and it's gonna max out at 10, and will go all the way down to zero.



Trailer Brake Controller Installation - 2008 Toyota Tundra

Today on our 2008 Toyota Tundra, we're going to take a look at and also show you how to install the "Tekonsha Voyager." This is a proportional trailer brake controller. It works for 1, up to 4 axles. Part number on it is 39510. To help complete the install, we'll be using part numbers 3040-P as well. That's the "Tekonsha Plug-In Wiring Adapter for Electronic Brake Controllers." Here's what the Voyager's going to look like installed. As you can see, it's a really simple installation process, just a few screws to hold our bracket and then a few screws into the brake controller itself.



Trailer Brake Controller Installation - 2008 Toyota Tundra

Today on our 2008 Toyota Tundra, we're going to take a look at and show you how to install the Tekonsha Prodigy P3. This is a proportional trailer brake controller that will work for one up to four axles. The part number is 90195. To ease the installation along, we're also going to be using the Tekonsha Plug-in Wiring Adapter for the electronic brake controllers, part number 3040-P. Now the Prodigy P3 is one of the most popular brake controllers that we offer. It offers a wide range of adjustability and it is proportional.



Trailer Brake Controller Installation - 2008 Toyota Tundra

Today in our 2008 Toyota Tundra, we're going to take a look at and show you how to install the Tekonsha Prodigy P2. This is a proportional trailer brake controller that'll work for one up to four axles. It's part number is 90885. To help with the install, we're going to be using the Tekonsha Plug-In Wiring Adapter, part number 3040-P, as well. Our Prodigy P2's a really nice, straightforward brake controller. It's very user-friendly which you'll see from the reviews, but it does a great job. This is a proportional brake controller so what that means is that it senses the deceleration that's in our truck, and it brakes our trailer accordingly.



Trailer Brake Controller Installation - 2008 Toyota Tundra

Today on our 2008 Toyota Tundra, we're going to take a look at and also show you how to install the Tekonsha Primus IQ. This proportional trailer brake controller works great for one of the three axles. Its part number is TK90160. We're also going to be using the Tekonsha Plug-in Wiring Adapter, part number 3040-P. The Primus IQ is a proportional braking system. What that means is it uses a sensor located inside to detect the braking force that's coming from our truck. In an emergency stop situation where we really get on the brakes hard, it feels that and it's going to send immediate heavy braking power to the rear up to whatever we've set with our gain.



Trailer Brake Controller Installation - 2015 Toyota Tundra

Today on our 2015 Toyota Tundra we're going to take a look at and show you how to install the Tekonsha Prodigy P2 Proportional Trailer Brake Controller. Works great for one up to four axles, part number on it is 90885. We're also going to be using the Tekonsha Plug-In Wiring Adapter for electronic brake controllers, part number on that, 3017-P. The P2 also offers safeguards built right in to the system to protect your vehicle, your trailer, and the brake controller itself. It defends the brake controller and trailer brake-away system system against shorts. It's going to help to prevent any overheating we might experience on those long stops by slowly reducing the power output going to the brakes, and it also minimizes the drain on the battery. When not in use it only draws 3.6 mA. The P2's going to be an excellent choice in brake controllers.



Trailer Brake Controller Installation - 2014 Toyota Tundra

Today on our 2014 Toyota Tundra, we'll be installing the Hopkins InSIGHT Flex-Mount Break Controller, part # HM47297. To install this break controller, we're also going to use the Hopkins Plug-In Simple Brake Wiring Adapter, part # HM47815. Now to begin our install, we'll first locate the manufacturers tow port so that we can plug our Direct-Fit Wiring Harness into it. Here on the driver's side kick panel behind the parking brake pedal, we can locate the manufacturers tow port. As you can see it's taped up to the main wiring harness, so I'm just going to use my utility knife to cut the tape and pull it free. Now that we've got the tow port free, we can take the white connector end of our Direct-Fit Wiring Harness, plug it directly into the manufacturers tow port. Next, we'll go ahead and route the four pull connector over to where we're going to mount the brake controller box. When routing your wires, stay away from any moving components such as the gas, brake, or emergency break pedal.



Trailer Brake Controller Installation - 2013 Toyota Tundra

Today, on our 2013 Toyota Tundra, we'll be installing the Tekonsha Prodigy P3 Brake Controller, part number 90195. In conjunction with the Tekonsha Plug and Play Wiring Adapter, part number 3040-P. To begin our install, we'll first go ahead and mount the brake controller bracket. For this application, I'll be using a couple of self tapping screws or you can also use the screws provided with the brake controller install kit. Once we have the brake controller mounted, we'll then go ahead and set the brake controller in the bracket and secure it with the screws provided in the install kit. Next, we'll need to go ahead and plug in our Plug and Play Wiring Adapter. Before I install the wiring harness, I'm using black electrical tape to wrap up the wires to hold the ground wire to the harness and to clean up our install look. Now with the taped up, we'll go ahead and take the white connector and plug it into the manufacturer's towing port, that's located on the driver's side, just above the kick panel and between it and the parking brake pedal. Now, with that connection made, we'll take the white wire, with the pre-attached ring terminal, which should be the ground wire for our harness, and secure here it to a body ground, which our parking brake pedal bracket is grounded so we can use our self tapping screw and secure it directly to that. Now, with those connections made, we'll go ahead and route our wire back over to the brake controller and install it into the back of the brake controller. Now we have it routed and installed, I'll go ahead and use a couple of black zip ties to secure our wiring up underneath the dash, and then we'll cut off the excess from the zip ties to clean up our install look. Now with that, we're ready to hit the road. That's about it the install of the Tekonsha Prodigy P3 Brake Controller, part number 90195, in conjunction with the Tekonsha Plug and Play Wiring Adapter, part number 3040-P on our 2013 Toyota Tundra. .



Trailer Brake Controller Installation - 2006 Toyota Tundra

Today, on our 2006 Toyota Tundra, we will be installing the Tekonsha Prodigy P2 trailer brake controller, part number 90885. The first step for our install is locating the factory wiring harness for the tow package. This wiring harness was located on the drivers side kick-panel, back with all the factory wiring. You can see it electrical taped back on the corner. Well cut back the electrical tape and pull the harness out. After weve located the wiring we need, well proceed onto the ground. Here I use one of the factory bolts to attach my ground wire to. Just to help with installation I cut part of the hoop connector, just to help it thread in.



Trailer Brake Controller Installation - 2012 Toyota Tundra

Today in our 2012 Toyota Tundra, we'll be installing the Curt TriFlex Trailer Brake Controller part number C51140. We'll be using this in conjunction with the direct connect wiring harness part number C51362. To begin our install, we'll first locate the manufacturer's tow port located on the driver side just above the edge of the kick panel. We can then take the direct connect harness white plug end and plug directly into the manufacturer's tow port. We'll then go ahead and start routing the harness over towards the center of the vehicle near the console being careful to stay away from any moving parts, such as the parking brake pedal. Next, we need to mount the brake controller. To mount the brake controller, we'll use the brake controller bracket and hardware provided with the install kit. We'll go ahead and take the hardware and secure the bracket directly to the brake controller first. Then we can take the bracket and secure itto the dash using the hardware provided.



Trailer Brake Controller Installation - 2002 Toyota Tundra

Today on this 2002 Toyota Tundra, were going to install the Prodigy P2 Brake Controller, part number 90885, and we are also going to use the install kit part number ETBC7. So our first step involved is to go ahead and remove the factory four pole wiring harness, and we are going to mount our 7 pole bracket to that. There are two screws we are going to remove right here, remove the bracket from the four pole as well. Were going to remove the two Phillip screws to free up the bracket from the four pole, there is one here and one on the other side. Now our 7 pole bracket just barely misses the two mounting holes on the factory bracket, so what we are going to do is actually drill these out to 3/8ths of an inch. They will get pretty thin on the side here, but it will be enough to hold everything together, it will be almost factory when we are done.



Trailer Brake Controller Installation - 2010 Toyota Tundra

Today on this 2010 Toyota Tundra we are going to install part number 90885-3040P. First thing we will do is show you where the port is on the vehicle, this has a factory tow package. It is going to be underneath the dash on the left hand side. First thing we are going to do is plug the adapter cord into the factory port right here. Next, we are going to take our ground wire and ground it to the piece of sheet metal right here next to this fastener. :31



Trailer Brake Controller Installation - 2007 Toyota Tundra

Today we are going to install on a 2007 Toyota Tundra and we will be installing the brake controller part number 39519 the Tekonsha Prodigy. We will also be using part number 3040-p from Tekonsha which lets you plug into the factory tow package in the vehicle. We begin our install by finding a spot to mount our bracket onto. Just go ahead and put it up there and see if you like it as a nice place to put a brake controller. It should give you a pretty good idea of how it fits. Makes sure you can access the thumb wheel on top. Seeing the LED screen is equally important. Now that you know it is in the correct position you can go ahead and mark the holes before you drill them. Now we will go ahead and drill out our holes after we have marked them.