Search: brkh7   >   !Wiring   >  

I attached a picture of a 4-bolt mounting flange like what the brake assembly part #AKEBRK-2 you referenced is designed to attach to. This is a standard dimension so I would be shocked if the flange on yours was different.

I can help you determine which wire at the brake switch on your brake pedal carries the Stop Light Switch circuit, but we do not have any vehicle specific information about the color of the stop light switch on your 2013 Toyota Sienna. To determine…

As long as your Toyota Sienna hitch is rated for weight distribution like the etrailer part #e98837 is and it has a set of higher weight capacities when used with a WD system what you are wanting to do is possible. This particular hitch has a 5,000…

In order to choose the correct replacement axle for a trailer you'll first want to start with the weight capacity. The weight capacity can be found on the axle tag in the center of the beam. Then, you'll need to measure the hub face (center…

A BT8 spindle would have a diameter of .99 of an inch where the bearings would both install and would have a diameter of 1.24 where the great seal would ride. That would require a hub part #AKIHUB-440-2-1K for an idler hub. A BTR spindle would have…

Yes, the Trailer Hub part #AKHD-545-2-2K that you referenced is compatible with the brake assemblies #AKEBRK-2L and #AKEBRK-2R. The bolt pattern is the standard brake mounting 4 bolt pattern of 4 on 4 inch.

There are many things that can affect the voltage on the brake output wire from your brake controller to your trailer brakes such as the power setting on your brake controller, how you are testing the wire and if you are testing it with the brakes or…

The hole diameters for the Demco Channel Tongue Trailer Coupler item #12564 are 1/2 inch. It is recommended to use grade 8 hardware to attach the coupler to your trailer frame. You can find these bolts at a local hardware store as they do not come…

Yes, the Demco Channel Tongue Trailer Coupler #12564 that you referenced does accept a 2-inch hitch ball and mounts to a 3-inch-wide trailer tongue. It's mounting hole spacing is indeed 3-inches and it offers a 10,000-lb weight capacity.…

The custom trailer wiring harness for your 2018 Toyota Highlander with the tow package is part #HM11141825; however, it's only a 4-way connector. To get a 7-way on your Highlander start with the #HM11141825 4-way and then use our #ETBC7 kit to…

Both of these are reliable brake controllers. Personally I like the freedom that the Curt Echo #C51180 gives you. You can use it on any vehicle with a properly wired 7-way and trailers with up to 2 braking axles. There is no wiring and it can be…

The Bright Way Trailer Brakeaway Kit #3802308 has a built in 1-AMP charger. So when your truck is connected it will be charging. There should be no draw going out while the trailer is disconnected so it should be ready to rip whenever you're…