Heavy-duty, steel pop-up vent opens in either of 2 directions so you can scoop in fresh air or keep out rain no matter which way the wind is blowing. Included interior garnish adds a finished look to your trailer's interior. Black color.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at part number 9106-2756. This is the Redline 2-Way Pop-Up Roof Vent and you're also going to get the interior garnish piece for enclosed trailers. The vent itself is made from a rugged, heavy-duty steel construction so it's built to last. It's a two-way pop-up lid so it's going to give you the choice of opening the vent toward either the front or back of your trailer. It'll simply adjust in steps from fully closed to fully open, giving you complete control over the amount of airflow. On the inside, we're going to have a convenient lever. That's going to be this silver piece that runs pretty much the full length of the opening.
Very easy to find, very easy to operate. That's how you're going to control the opening of the vent. This right here is fully closed. There's step one, step two, then step three is fully open. We can control that going in the other direction as well, in the same steps.
Step one, step two, then step three is fully open. It's really nice, very easy to use. You can see in here we're going to have a built-in heavy duty steel screen that's going to keep out bugs, leaves, and any other outdoor things that you don't want getting in your trailer. We're going to have a nice black paint finish. Very durable as well as attractive, it gives the vent a nice look. And then you're going to get this foam gasket. This is included.
That's going to mount on the outside of the trailer, on the roof, directly underneath the vent. That's going to help create a nice, tight seal to prevent leaks. This right here is going to be our black plastic interior garnish. This is going to provide a nice, good-looking touch to the inside of the trailer. This is the flange that goes up in the ceiling and that can be trimmed to fit thinner roofs. Now when we take a look at the rough opening size that we're going to need, we're simply going to measure this piece right here, starting with the length from this point here to this point here. That's going to give us an exact measurement of about 11-3/16 of an inch, so rough opening size is going to be around that mark.
The width, measuring from this point here to this point here, that's going to give us a measurement of about 5-1/2 inches wide. Now if we take a look at the overall dimensions, we're simply going to measure the vent first, outer edge to outer edge. That's going to give us a measurement of about 13-1/2 inches long. If you measure the width from outer edge to outer edge, that's going to give us a measurement of about 8 inches wide. Now when this is fully installed, the vent is going to extend above your trailer's roof, when it's fully closed, about 2-1/2 inches. When it's fully open, that's going to increase the extension above the roof to about 5 inches. The inside bar or the handle right here, if we take a measurement of that length, measuring from end to end, that's going to give us a measurement of about 10-1/4 inch. That's going to hang down from the bottom portion of the flange to the very bottom of the handle of about 1 inch. It's very easy to grab, very easy to operate. Take a measurement of the interior garnish piece real quick. It's got a really nice design to it so again it's going to add a nice look to the interior of your trailer. This is going to measure about 14-1/8 inches long by about 8-1/2 inches wide. The flange length that we have, that's going to give us a measurement of about 2 inches. You can see here it's got a really nice look to it. We're going to have the rounded corners on it so it provides a nice, sleek look. Now again, this is going to go up in the opening from inside the trailer. This would sit on the roof of the trailer and then this would go over that interior piece and mount to the roof of the trailer. You're going to need 12 screws to get this installed. Those are required to install the vent. 12 screws go in all the way around so we've got 12 mount holes. Those are going to give us a diameter of 3/16 of an inch. The screws or the mounting hardware is going to be sold separately. That's going to fit number 8 screws. Also keep in mind that the garnish does not have any pre-drilled mounting holes so 12 screws just to get the vent attached the roof. The mounting gaskets going to have those holes that line up perfectly with the mount holes in the vent. You may need just a couple screws to get the interior piece installed as well. That's going to do it for our look at Part number 916 . excuse me, 9106-2756. This is the Redline 2-Way Pop-Up Roof Vent.
Average Customer Rating: 4.8 out of 5 stars (53 Customer Reviews)
Heavy-duty, steel pop-up vent opens in either of 2 directions so you can scoop in fresh air or keep out rain no matter which way the wind is blowing. Included interior garnish adds a finished look to your trailer's interior. Black color.Nice vent. Sturdy and very well built. I have to say, this was the best customer service I have had in years!!!!! Wow, seriously, these are professional!!!!! All my products were all top notch and customer service was amazing!!! Thanks for making my worries about ordering online disappear!!!! 39520
Installed it on 2016 rzr 900 4 seater for extra free flow air when front windshield is on. Works great nd is easy to instal and work. It does come with the inside trim piece. So don’t order one thinking it doesn’t come with one like I did. 564507
FAST processing and QUICK shipping to AK!!!! I recent purchased a Sprinter for business use and have ordered from a dozen vendors this past couple weeks. etrailer was the quickest with processing my order than any other vendor. Redline pop up vent was purchased as a fresh air intake for gas air compressor and an out port for air lines, to be installed on rear door so I can keep doors closed in cold winter months. Very impressed with quality of vent and it’s going to work out perfect!!! The demension of one of the ports will easily fit an air line track after cutting out mesh. Thanks etrailer! Keep up the good work 435330
Vent D - 09/22/2018To mitigate the rusting issues, you can lightly sand and get rid of the rust and expose the bare metal. Then use a high quality spray paint to touch up and seal the surface.
--
Rachael H - 9/25/2018very good vent installed in roof on 2016 Honda pioneer 1000, easy install , cut opening with a dremel tool 379598
Got 2 of these pop up vents to add on with my small original vents. Now i have good airflow especially with the MaxxFan i recently installed and my Trailer stays cool. Can leave it open on hot days but have to close them when its raining. Good quality built. Glad i got these! Thanks ETrailer 749510
Great store, reasonable prices, and speedy delivery! 730727
Strong heavy duty Very well made Happy 728758
This vent is exactly what I need and wanted. I did not want a large vent sticking up on my van roof. For ventalation I have floor in ports and have ducting with an inline blower fan to exit air out. thank you for the fast delivery. 725698
I would like to buy these vents without the gasket and interior trim ring at a reduced price. Otherwise they are good. 705477
This vent is just what I was looking for! I am using it on a camper shell to force air in while driving to keep our Dogs cool. 705465
well made, Pleased with the product. Delivered right on time. Gonna order 2 more for another trailer. 693096
Works great. It was easy to install. Very happy with the product! 666793
Delivery was on time and product for my needs was great. I have since purchase 7 products Very happy. 607374
Heavy duty, liked the gasket. Should have read the product information better. Screws are sold separately. 572186
Best dang trailer roof vents available. Waaaaay better than aluminum. Building are made out of steel, not aluminum. 554093
Very good materials, I liked it 481303
Installed two of these on my van. Well made product, nice heavy metal. Easy to install just used included gasket for template. etrailer shipped quickly, and had good customer service 472717
Exactly the right roof vent for our 1986 Trailet SS Baron II. IDENTICAL. Thanks and a hat tip from Dustybridle. 453306
Very good product, easy to install just use included gasket for template. Shipping was fast, received shipment a day early 446673
Excellent product, very easy and professional staff to order from, prompt service. Thanks 406677
Great product at a great price ! 400362
JR - 07/05/2018Works great but paint has faded. 384336
The vents I ordered worked perfect. Really like that they open both directions. 375290
I ordered this to provide venting in a conversion cargo trailer. It's clunky, but seals well. Not small bug proof. Sort of feels like something from WW2 and I'm still looking for a good adjustable vent system which is weather proof if left open. 366827
Snail mail means Snail Mail but the vent is perfect 357001
Do you have a question about this RV Vents and Fan?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.