Accessories and Parts




Trailer Brakes


Electric Drum Brakes


Hydraulic Drum Brakes



Mounting Hardware for 7" Brake Assemblies

Mounting Hardware for 7" Brake Assemblies

Item # BRKH7

lowest price pledge

Our Price: $8.45

Accessories and Parts

Orders above $50 qualify for Free Shipping

Shipping Weight: 0.68 lbs

Arrives before Christmas with Ground or Free Shipping.
In Stock
Redline 7 Inch Accessories and Parts - BRKH7
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images


Use this hardware kit to mount (2) 7" brake assemblies on your trailer. Includes nuts and lockwashers. For assemblies with pre-installed mounting bolts. Call 800-298-8924 to order Redline accessories and parts part number BRKH7 or order online at Free expert support on all Redline products. Guaranteed Lowest Price and Fastest Shipping for Mounting Hardware for 7" Brake Assemblies. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (8)
  • Q & A (14)
  • Videos (1)
  • Photos
  • Why etrailer?

Redline Accessories and Parts - BRKH7

  • Trailer Brakes
  • Electric Drum Brakes
  • Hydraulic Drum Brakes
  • Redline
  • Hardware
  • Hardware Kit
  • 7 Inch

Use this hardware kit to mount (2) 7" brake assemblies on your trailer. Includes nuts and lockwashers. For assemblies with pre-installed mounting bolts.


  • Allows you to install 2 trailer brake assemblies
    • Fits 7" brake assemblies with pre-installed mounting bolts
    • Works with electric or hydraulic brakes
  • Includes:
    • 8 Nuts
    • 8 Lockwashers

6-17 Nut for Brake Mounting Bolt

5-8 Lockwasher for Brake Mounting Bolt

Video of Mounting Hardware for 7" Brake Assemblies

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.

Video Transcript for Redline Trailer Brakes BRKH7 Review

Today we're going to take a look at the mounting hardware for 7" brake assemblies. Now, this hardware will allow you to install two trailer brake assemblies to the 4-bolt brake mounting flange on the trailer axle. This hardware is designed to fit 7" brake assemblies that have the pre-installed mounting bolts already on them. This will work with electric or hydraulic brakes. It includes everything shown here. It includes eight of the 7/16 by 20 nuts, and the size socket that they fit in is going to be 11/16. It also comes with eight of the lock washers.

That should do it for the review on the mounting hardware for 7" brake assemblies.

Customer Reviews

Mounting Hardware for 7" Brake Assemblies - BRKH7

Average Customer Rating:  4.8 out of 5 stars   (8 Customer Reviews)

Use this hardware kit to mount (2) 7" brake assemblies on your trailer. Includes nuts and lockwashers. For assemblies with pre-installed mounting bolts.


They are exactly what we were looking for! The tracking information is crack on and the delivery was quick. There was no double talk about we did not have one of the multiple items in stock, so we are holding the order. This was my second order from and we would do it agian and again!!! AAA+ 399051


E trailer did a fantastic job. Before order: Technical support / help was excellent. Goal, conversion of a 1998 Floe snowmobile trailer from surge to electric brakes. Problem, due to time and corrosion, I could only supply partial part numbers, spindle diameter. etrailer did a fantastic job, researching, and getting me the correct part numbers, so I could order. Julie did a great job. She was very timely, communicated clearly and honestly, and just “kept me in the loop”. I received the order came on the projected date, complete and undamaged. Excellent. I would highly recommend etrailer, for your part needs. 438927


7 inch brake assembly and hubs arrived on time, and are already installed. Easy trouble-free. Quality product. 383842


Product shipped the day I ordered. Would definitely go back when I need anything RV related! 716096


Eight bolts and 8 lock washers. Heavy metal and sized to fit. What more could you want? Saved me having to find the right size on my own 620257


Great quality fasteners and well packaged. Moreover, the best customer service I’ve ever experienced bar none! 591334


Perfect! 539508


They do the job 438832


Ask the Experts about this Redline Accessories and Parts

Do you have a question about this Accessories and Part?

  • Comparison of Dexter and etrailer 7 Inch Brake Assemblies for Trailers with 2,000 Pound Axles
  • The Dexter # 23-47-48 and etrailer # AKEBRK-2 brake assemblies are just that. The same part made by two different companies. They're both 7 inch brake assemblies for 2,000 pound axles. Both the left and right hand brakes are included and labeled to make it easier to install. The etrailer brand does include the mounting bolts where the Dexter does not. For mounting bolts use # 7-75. Neither of them include the Mounting Hardware # BRKH7.
    view full answer...

  • Recommended Components To Add Electric Brakes To 1997 Coleman Destiny Pop-Up Camper
  • It looks like you have really been spending some time putting together the components you need to install electric brakes on your camper. The # AKHD-545-2-2K hub and drum will work on your camper but you will need to replace the 10-9 seals included with the kit with # 13194 seals. The brakes you mentioned, # AKEBRK-2 will work great with the hub and drum. Since you said you have a 4-bolt brake flange the # BRKH7 brake mounting hardware will also work for you. The breakaway...
    view full answer...

  • Electric Trailer Brakes for Boat Trailer With 2,000 lb Axles
  • Thanks for the photo and it looks like you do have 2,000 lb axles so you can use Dexter Electric Trailer Brake Kit - 7" - Left and Right Hand Assemblies - 2,000 lbs # 23-47-48 so long as you have a 4-bolt brake mounting flange such as the Brake Mounting Flange for 1-3/4" Round Trailer Axles - 2K # 4-34 as well as a 7" hub and drum like the Dexter Trailer Hub and Drum Assembly for 2,000-lb Axles - 7" - 5 on 4-1/2 # 8-257-5UC3. If you need a new hub and drum assembly you do need to know...
    view full answer...

  • Wiring for Curt Echo Mobile Wireless Brake Controller and Adding Electric Brakes to a Trailer
  • The Curt Echo Brake Controller part # C51180 is a great choice because of its convenient and simple installation. The 7-way connector that you mention part # A10-7084VP pugs into the 4-way connector you purchased part # C56217. The white wire from the 7-way plug needs to be grounded to a clean bare metal surface on the vehicle's frame. You are correct, the black wire from the 7-way connector needs to be extended from the plug into the engine cavity and to a 40 amp circuit part # 9510...
    view full answer...

  • How To Add Brakes to a 2006 Coachman Clipper Pop-up Camper
  • Yes, the Electric Trailer Brake Kit part # AKEBRK-2 and the Dexter Trailer Hub and Drum Assembly part # 8-173-16UC3-EZ are correct for your pop-up camper based on the information that you provided. The braking assemblies do not come with the lock nuts and washers so you can obtain these using the Mounting Hardware Kit part # BRKH7. In order to complete your setup you will also want to use the Trailer Wiring 7-Way Upgrade Kit part # ET7WK. The main difference between the Curt Reflex Trailer...
    view full answer...

  • Parts Needed to Add Electric Drum Brakes to Trailer
  • The linked article gives you a recap of what is needed to add brakes to a trailer. Since your trailer's 2200-lb axle already has brake flanges installed, adding brakes to it will require you to select left- and right-hand brake assemblies and hubs/drums to replace your idler hubs. The new hubs have to use the same inner and outer bearing as your old hubs to ensure they will fit on your existing spindles. Check the mounting bolt pattern on the flanges to ensure they match the 4-bolt pattern...
    view full answer...

  • Parts Needed to Add Electric Brakes to Trailer and Tow With 2010 Toyota Tacoma
  • We have all the parts you need to install and use electric brakes on your 1999 Jayco and tow it with your 2010 Toyota Tacoma; since you already have a 4-flat and have the Tekonsha Prodigy P3 Trailer Brake Controller # 90195 and Wiring Adapter # 3040-P you won't need anything else for your truck. As for the size of your brakes, there are numerous models of a1999 Jayco Heritage Manistee so I was unable to confirm the exact size you need so you will need to measure the diameter and depth...
    view full answer...

  • Recommended Dexter Brake Kit for 2500 lbs Dexter Axle
  • For your 2500 lbs Dexter Axle you will want the Dexter Hydraulic Trailer Brake Kit # 23-398-399. These brake assemblies measure 7 inch x 1-3/4 inch, mount to a 4 bolt mounting flange, and are compatible with 10 inch, 12 inch, and 13 inch wheels. I have attached a review video that you can check out for more information. If your brakes are 10 inches x 2-1/4 inches, if you could let me know whether you have electric or hydraulic brakes I can look into those options as well. If you need...
    view full answer...

  • Recommended Least Expensive Brakes For 2000 lb 2-Jetski Trailer
  • For your 2 jetski trailer, the least expensive way to add brakes is an electric brake. To do this, I recommend adding the Electric Trailer Brake Kit - 7" - Left and Right Hand Assemblies - 2,000 lbs # AKEBRK-2. This will mount to your axle flange using hardware # BRKH7. You will need a brake adjustment tool like # W80630 for this installation and maintenance. For your hubs, if you have 4 on 4 inch bolt pattern wheels, you will need # 8-276-5. If you have 5 on 4-1/2 inch bolt pattern...
    view full answer...

  • Weight of Electric Trailer Brake Kit AKEBRK-2
  • The Electric Trailer Brake Kit - 7" - Left and Right Hand Assemblies # AKEBRK-2 weighs just about 2 lbs. These are a pair of electric brakes that measure 7" x 1-1/4" with a 2,000 lb capacity. To install these brakes you will also need the Mounting Hardware for 7" Brake Assemblies # BRKH7.
    view full answer...

  • Replacement 7 inch Brake Assembly for Fiat Elnagh 320 Motorhome
  • Buongiorno! We do carry Replacement Magnet Kit for 7" Electric Trailer Brake Assemblies - 2,000 lbs Item # AKBRKR-M7. However, it looks like the center mounting hole on yours is round, whereas ours uses a square/rectangular hole. It doesn't appear that the hole on the # AKBRKR-M7 is large enough to allow the arm (on the brake assembly) to fit through. If you scroll to about the 5:40 min mark on the Redline Replacement Magnet Kit video Iinked below, you'll see the arm I'm referring...
    view full answer...

  • Parts Needed to Convert from Hydraulic to Electric Brakes on a 1995 Jayco Pop Up Trailer
  • We have everything you need. Since you already have brakes then you already have hub and drums. If you need new hubs let me know your bolt pattern and inner and outer bearing numbers and I'll recommend the correct parts. You're going to need to wire the trailer to power the brakes. This will require to have a 7-way connector if it doesn't already have one, like # 277-000141. It's attached to a junction box to make wiring everything easier. You'll also need ring terminals, # 44-5310A,...
    view full answer...

  • Adding Electric Brakes to a 2,100 lbs Axle
  • To add electric brakes to your 2,100 lb axle you will need the Electric Trailer Brake Kit # AKEBRK-2. This comes with left and right hand assemblies that are 7" diameter x 1-1/4" wide, fit 12" wheels and have a 4 bolt mounting flange pattern. You will also need mounting hardware # BRKH7 to complete the installation, and a brake adjustment spoon # W80630. The only other thing you will need is a brake controller and the wiring that goes with it. I have added a link to our page with our...
    view full answer...

  • Brake Assemblies and Hub Assemblies for 2,000 lb Trailer Axle
  • The Trailer Hub and Drum Assembly - 2,000-lb E-Z Lube Axles # AKHD-545-2-EZ-2K is only available as an independent part and is not available in a kit or pack. You will simply need to add the part to your cart selecting the quantity of 4. If you don't have the brake assemblies, you can use the Electric Trailer Brake Kit - 7" - Left and Right Hand Assemblies - 2,000 lbs # AKEBRK-2. You will just need 2 kits for your 4 hub assemblies. Then you will use two hardware kits # BRKH7 and wiring...
    view full answer...

Do you have a question about this Accessories and Part?

  • Why

    At we guarantee:

  • Highest quality accessories and parts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate accessories and part information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Edited by:
Lindsey S
Installed by:
Jeff D
Installed by:
Brent H
Video by:
Joshua S
Written by:
Alexander C

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.

Product Experts Available Now!

Call 800-298-8924