8-1/16" x 2-7/8" Rectangle. Waterproof lights act as brake, tail, turn, side marker, side reflex, rear clearance, rear reflex, and license plate light for trailers wider than 80". Surface mount - hardware included. 3-Wire pigtail.

7-9/16" x 3-5/16" Oval. Waterproof LED trailer tail lights function as stop, turn, and tail signal lights when properly mounted. Durable polycarbonate housing and lens. Reccessed mount with grommet. Accepts included standard 3-prong plugs.

This waterproof identification light bar with 3 lights is 15-15/16" long and designed for trailers wider than 80". Durable polycarbonate housing and lens. Surface mounts to trailer - hardware not included. 2-Wire design. DOT approved.

7-3/4" x 3-1/8" Rectangle. Waterproof trailer tail light serves 6 functions: brake, tail, turn, reflex, side marker, and license plate light. Durable polycarbonate lens and housing. Surface mount to trailer. 3-Prong molded plug.

Waterproof trailer light kit includes 2 combination tail lights that serve 7 functions on trailers under 80" wide. Universal mount with stainless steel hardware and included license plate bracket. 25' wiring harness with 4-pole connector.

Waterproof trailer light kit includes 2 combination tail lights that serve 7 functions on trailers under 80" wide. Stud mount with stainless steel hardware and included license plate bracket. 25' wiring harness with 4-pole connector.

7-3/4" x 3-1/8" Rectangle. Waterproof trailer tail light serves 5 functions: brake, tail, turn, rear reflex, and side marker. Durable polycarbonate lens and housing. Surface mount to trailer. 3-Prong molded plug

14" x 6-7/8" Rectangle. Triple trailer light provides stop, turn signal, tail, and backup light functions. Durable polycarbonate base and lens. Mounts on surface of trailer - hardware not included. Pre-wired design.

6-1/16" x 3-5/8" Rectangle. Waterproof trailer light acts as brake, tail, turn, side marker, side reflex reflector, and rear reflex reflector. Mounts on surface of trailer - hardware included. 3-Wire pigtail. 18 LEDs.

8-1/16" x 2-7/8" Rectangle. Waterproof lights act as brake, tail, turn, side marker, side reflex, rear clearance, rear reflex, and license plate light for trailers. Surface mount - hardware included. 3-Wire pigtail. 25' Wiring harness.

5-1/16" x 4-9/16" Square. Waterproof trailer light serves 7 functions: stop, turn, tail, rear reflex, side marker, side reflex, and license plate light. Durable plastic housing. Stud mount on 2" centers. 3-Wire design.

2-1/8" x 1-1/8" Rectangle. Waterproof, LED trailer light serves as either a side marker light or clearance light when properly mounted. Durable polycarbonate lens and housing. Stud mount to trailer. Single wire design. P2 rated.

7-9/16" x 3-5/16" Oval. 3-Function, waterproof LED light acts as brake, tail, and turn signal. Durable polycarbonate housing and lens. Surface mount with built-in flange - hardware not included. 3-Wire design.

Trailer kit with 2 stud-mount, submersible tail lights; corrosion-resistant license-plate bracket; 2 amber side marker and clearance lights; 25' wiring harness with 4-pole connector; mounting hardware

7-1/2" x 3-1/4" Oval. Waterproof light serves 4 functions: brake, tail, turn, and backup light. Red lens is set inside of clear lens. Mounts on surface of trailer with built-in flange - hardware not included. 4-Wire pigtail. 16 Diodes.

8-5/8" x 3-1/4" x 2-5/16". Waterproof trailer light illuminates your license plate. Durable ABS housing. Clear lens under polycarbonate housing. Surface mount on 3-1/2" centers with included bracket. 2-Wire design. 5 Diodes.

4" x 1-1/2" Oval. Trailer light with reflector functions as a clearance or side marker light. Durable polycarbonate base and lens. Mounts on surface of trailer - hardware not included. 2-Wire pigtail. P2 rated.

8-11/16" x 3-3/16" Rectangle. Low-profile RV light serves 4 functions: brake, tail, turn, and license plate light. Built-in license plate bracket. Snap-on lens. Mounts on surface of trailer. 3-Wire pigtail.

5-1/16" x 4-9/16" Square. Waterproof trailer light serves 6 functions: stop, turn, tail, rear reflex, side marker, and side reflex. Durable plastic housing. Stud mount on 2" centers. 3-Wire design.

2-1/2" x 1-3/16" Rectangle. Waterproof trailer light functions as both a clearance light and a side marker light when properly mounted. Requires mounting bracket and plug (both sold separately) for installation. Amber lens. PC rated.

8-5/8" x 3-3/16" Rectangle. Incandescent RV light serves 3 functions: brake, tail, turn. Surface mount. 3-Wire pigtail. Red acrylic lens. Black ABS plastic base.

10-1/8" x 3-1/16" Oval. 4-Function, waterproof light acts as brake, tail, turn, and backup light. Red lens set inside clear lens. Mounts to trailer surface with built-in flange - hardware not included. 4-Wire pigtail. 14 Diodes.

2-1/2" x 1-3/16" Rectangle. Waterproof trailer light functions as both a clearance light and a side marker light when properly mounted. Requires mounting bracket and plug (both sold separately) for installation. Red lens. PC rated.

Waterproof clearance/marker light can be installed on either your driver's-side or passenger's-side trailer fender. Amber light faces front, and red light faces rear. Surface mount with durable ABS plastic base. 2-Wire pigtail. P2 rated.