Replacement Clearance Lights Needed for GLO-BRITE 122R and 122Y Lights

Question

Question:

i need a replacement for 122r/122y light or cover yello

asked by: Donald S

0

Expert Reply:

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use as replacements.

I recommend checking out the Command LED lights # 328-K-51 for amber and # 328-K-52 for red. These measure 4" long x 1-1/2" tall and have mounting holes that are spaced 3" apart on center.

Attached are links to review videos and our selection of clearance lights that you can filter through as well.

expert reply by: Jon G

0

Marlin

4/1/2024

Your listed suggestions have different sizes shown. 328-K-51 and 328-L-52

Reply

Jon G.

4/2/2024

@Marlin Thanks for reaching out! We just found out about a design change with these lights where the dimensions are slightly different than they used to be. One of the pages has already been updated and the other one is in the process of being updated. The correct dimensions for both # 328-K-51 and # 328-K-52 LED Lights are 4" long x 1-1/2" tall x 1/2" deep.

Reply

Answer 1

The globrite 122 in red or yellow/amber are 3.75 inches by 1.70 inches from what I can find online. We do not have a direct replacement, however the closest dimension we have to replace them is 3-1/2 by 1 inch. I recommend the #MC68RB and #MC68AB. If…

view full answer...

Answer 2

The Optronics LED Clearance or Side Marker Trailer Light is available in Red #MCL0030RBB and Amber #MCL0030ABB. These are the closest replacements to the Glo Brite 122r/122y lights you have. The lights only have one LED diode versus the 3 in your…

view full answer...

Answer 3

I do have an option but Glo-Brite is no longer in business so you won't be able to get any replacement parts for these lights such as lenses. The only option you have would be a full replacement for which the most similar option we offer is the…

view full answer...

Answer 4

Ways to raise the height of a trailer for better ground clearance include using larger wheels/tires and installing an axle over-under kit that reverses the placement of the springs and axle. An axle over-under kit (we offer two) will give you a…

view full answer...

Answer 5

To replace your GloBrite 126 marker lights you can use the #MC44RB. These lights are 2-wire incandescent lights measuring 4" long by 1-1/2" wide (same as your existing marker lights) and will work great for your trailer.

view full answer...

Answer 6

Hello Dave. The 1 or 2 diodes simply refers to the number of light emitting diodes (LEDs) housed inside each light. More diodes does not necessarily mean a brighter light, it just has to do with the construction of the light. You can definitely get…

view full answer...

Answer 7

We have lights that are similar to the Glo-Brite 122R and 122Y lights but not exact replacements. I recommend the Optronics Clearance or Side Marker Trailer Light - Incandescent - Oblong - Red Lens #MC68RB and Amber Lens #MC68AB which are 3-1/2"…

view full answer...

Answer 8

It looks like you will need to replace the entire light assemblies on your 2008 Winnebago Adventurer 35L as the lens mounts for the Optronics MCL0028 #A0028AB uses a different mounting style than the lights on your Adventurer. You current lights are…

view full answer...

Answer 9

I have a solution I can provide for you but we do not carry the replacement lens you are looking for. The clearance light part #MCL31AB and #MCL31RB are very close in shape and dimension to the lights you are looking for. They are both 4 inches wide…

view full answer...

Answer 10

My contact at Yates Rubber advises that a nominal 8-inch keel roller does not measure exactly 8 inches; typically they are slightly smaller than the specified size, much the way a piece of 2 x 4 lumber is not exactly 2-inches by 4-inches. I took…

view full answer...

Answer 11

Since Glo-Brite is no longer in business we can not get replacement parts for their products, that being said, the Lens for Optronics MCL0028 Series Clearance or Side Marker Light #A0028AB you reference is the closest replacement we offer. This…

view full answer...

Answer 12

I do have an option but Glo-Brite is no longer in business so you aren't able to get replacement parts for their lights. The only option you have would be a full replacement for which the most similar option we offer is the Optronics Clearance or…

view full answer...

Replacement Clearance Lights Needed for GLO-BRITE 122R and 122Y Lights

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching