bing tracking image
  1. Trailer Lights
  2. Optronics
  3. Tail Lights
  4. Rectangle
  5. LED Light
  6. Red
Low Profile LED RV Tail Light w/ License Bracket - 4 Function - 12 Diodes - Black Base - Driver Side

Low Profile LED RV Tail Light w/ License Bracket - 4 Function - 12 Diodes - Black Base - Driver Side

Item # RVSTLB61
Retail:$51.23
Our Price: $47.00
You Save: 8%
Trailer Lights
Orders above $99 qualify for Free Shipping
Shipping Weight: 0.6 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
8-11/16" x 3-3/16" Rectangle. Low-profile RV light serves 4 functions: brake, tail, turn, and license plate light. Built-in license plate bracket. Snap-on lens. Mounts on surface of trailer. 3-Wire pigtail. Great Prices for the best trailer lights from Optronics. Low Profile LED RV Tail Light w/ License Bracket - 4 Function - 12 Diodes - Black Base - Driver Side part number RVSTLB61 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (162)
  • Q & A (0)
  • Photos

Optronics Trailer Lights - RVSTLB61

  • Tail Lights
  • Rectangle
  • LED Light
  • Red
  • 8-11/16L x 3-3/16W Inch
  • Surface Mount
  • License Plate
  • Rear Reflector
  • Stop/Turn/Tail
  • Non-Submersible Lights
  • Optronics

8-11/16" x 3-3/16" Rectangle. Low-profile RV light serves 4 functions: brake, tail, turn, and license plate light. Built-in license plate bracket. Snap-on lens. Mounts on surface of trailer. 3-Wire pigtail.


Features:

  • Low-profile RV tail light serves 4 functions
    • Stop, turn, and tail
    • Built-in license plate light illuminates trailer license plate
  • LEDs make great replacements for incandescent lights
    • Last 50 times longer
    • More efficient - provide brighter light with less power output
    • No bulbs to replace - no brittle filaments
  • Durable black ABS plastic base with snap-on lens
  • Red and clear lens over white LEDs
  • Compatible with 12V DC systems
  • Mounts on surface of trailer with built-in license plate bracket - hardware not included
  • 3-Wire pigtail
    • White wire for ground
    • Black wire for tail light
    • Green wire for stop/turn signal light
  • DOT compliant
    • Meets FMVSS 108 and CMVSS 108 requirements for automotive lighting


Specs:

  • Configuration: driver side
    • Passenger side: RVSTLB60 (sold separately)
  • Light dimensions: 8-11/16" long x 3-3/16" wide x 2-1/8" deep
  • Height with license plate bracket: 5"
  • Diodes: 12
  • Power draw at 12.8V:
    • Stop/turn: 0.243 amps
    • Tail: 0.046 amps
  • Lifetime warranty on LEDs


Optronics RVSTL61 Series RV combination tail light Dimensions

RVSTLB61 Optronics Low Profile LED RV Tail Light w/ License Bracket - 4 Function - 12 Diodes - Black Base - Red Lens - Driver Side - Left Hand




California residents: click here


Customer Satisfaction Score:


Customer Reviews

Low Profile LED RV Tail Light w/ License Bracket - 4 Function - 12 Diodes - Black Base - Driver Side - RVSTLB61

Average Customer Rating:  4.8 out of 5 stars   (162 Customer Reviews)

8-11/16" x 3-3/16" Rectangle. Low-profile RV light serves 4 functions: brake, tail, turn, and license plate light. Built-in license plate bracket. Snap-on lens. Mounts on surface of trailer. 3-Wire pigtail.

by:

First unit arrived broken and was replaced by etrailer no problems.
Many thanks to everyone at etrailer.

Gary

7/6/2023

Another year Another cross country trip. Even the US highway system couldnt knock these lights out. If you need replacements Id buy these assemblies. etrailer knows how to run a railroad.



by:

Easy to install. Much brighter than the incandescent bulb. Only draw back is it was smaller than the OEM. Had to put stainless screws with silicone in the upper two holes.



by:

Well built, easy installation. Nice LED upgrade to my trailer



by:

Easy replacement.



by:

I have been buying from etrailer for probably around 7 Years. they are great to work with. I f you have a problem they will fix it. I can count on the correct parts. You may find it a little cheaper on Amazon but i will use etrailer.



by:

Great replacement for older lights. This was an exact match.



by:

so far, working great

Lee

1/12/2024

Still working great!!



by:

The color coding on the wires for the lights was way off white was ground green was tail and black was turn. I am a master level john deere mechanic i had to get my volt meter out and trace the wires off of the light Came with no instructions. Once i figured out that the wires that come off of the light where wrong and rewired it up it worked fine

Etrailer Expert

Katrina B.

4/7/2023

You are correct, we do not send instructions with these lights since the wiring information is on our product page. Sorry for any confusion but it states on the product page that the white wire is for ground, black is for taillights, and green is for stop, turn signals.



by:

Ordered to replace brake lights on my rv. Realized one had broke on way to campground. Used 2 day shipping and they were delivered on time. Quickly installed at campsite and boy are they bright! Looking forward to the trip home. Maybe now other drivers can see my blinkers when I turn them on!



by:

Perfect replacement for my 2018 Reflection 337RLS. Much brighter than old lights. If you order the passenger side make sure you order the matching base color.



by:

Excellent plug and play LED replacement for the cheap factory rear light.



by:

Easy change over from the worthless OEM . I don't have to worry about if I I have taillights anymore .



by:

Great replacement for stock incandescent lights. Easy install.



by:

I replaced all the clearance lights and taillights on our fifth wheel camper with these OE style LED versions. They are much brighter and therefore much safer, especially in the case of the tail/brake/turn lights seen elsewhere at etrailer. They should last a lot longer than the original bulb units. I also like the way they look as compared to the old bulb style. Our camper was only a year old, and I don't understand why they all wouldn't come from the factory with LEDs. I installed them all myself without issue.

Grant N.

1/22/2018

Thank you for your follow up. I am still happy with my purchase,although they are installed on a fifth wheel camper trailer that doesnt getused a lot and usually in the daylight hours, so the lights havent got alot of hours on them. So far, so good. Thanks again.



by:

I put these on my 5th wheel camper to replace the originals incandescent lights that from new never looked as bright as they should have been. So I ordered all new LED lights, and so far, WOW!!!!! They are awesome!!!! etrailer is so easy to work with and their follow up from shopping cart to delivery notifications are top notch!! Thank you!!!!!!!!

Bob S.

10/1/2018

Lights are great!! still very satisfied that I replaced the incandescent factory ones with these LED ones. Thanks again guys at etrailer!



by:

Exact replacement fit for the OEM incandescent tail/brake lights. The LEDs are MUCH brighter than the OEMs (both tail light and the brake/turn signal) and add an updated look to my RV in addition to the improved safety factor.

Douglas

7/27/2019

At one point, I had an intermittent problem with the PS tail-light. Traced it to a bad soldered connection, reflowed the solder and all is well since then. Their installation was a good upgrade to my trailer.



by:

Very bright customer wish she replaced both instead of one



by:

Changed out the factory marker lights to these LED markers on our 2018 Grand Design Reflection 5th wheel. Made a big improvement in increased visibility for both daytime and nighttime driving. The installation went well & I found using a putty knife made for easy removal of the original silicone caulk material. I purchased enough of these new LED's in both the red & yellow to change everything out. After doing the first 1/2 of the project I did a comparison with the new LED markers & the original ones and the advantages were quite obvious! Also swapped out the tail/brake lights to LED's & a big improvement there also, along with the added driving safety.



by:

The taillight I purchased is well made and is an exact replacement for the RV. Upon further review, the old taillight was not defective so now I have a new spare on hand.



by:

I purchased these LED taillights as a direct replacement for the stock incandescent fixtures that our 2019 Aliner Ranger 12 came with. I wanted to upgrade to LED for greater visibility and reliability. These were a win on both counts. The best part was that I didn't have to drill any new holes to mount them as the fixture housings are identical.



by:

Great service and fast shipping



by:

The white light that is supposed to illuminate the license plate does not work when the trailer lights are on. But the light does come on flashing when the emergency four way flashers are on. This can’t be right.



by:

Perfect LED replacements for my 2017 Grand Design 315RLTS travel trailer's incandescent lights. These lights fit the existing mounting holes on our camper perfectly and are a huge improvement over the original lights. Another great feature of this light is that it contains a separate set of LEDs for the license plate.



by:

I had lost the lens on the way home from a music festival. I was having a hard time finding it at my local trail repair places. I found etrailer and ordered one with a white base. It was on back order which would be a long wait they contacted me to see if a black base would work and they could ship it out the next day. What a great way to help a customer. I highly recommend buying everything you can from this company.



by:

Replaced OEM incandescent tail lights in a Signature Ultra Lite trailer. The directionals in original lights were barely visible in daylight. the LED replacements are easily seen in sunlight and are exceptional at night. The upgrade was like for like, same screwholes and even used rubber gasket from originals. All in all very satisfied with product and ease of changeover


25
162
Show More Reviews

See what our Experts say about this Optronics Trailer Lights

  • How To Mount a License Plate On a Haulmark Utility Trailer
    I don't have any information specific to any one particular trailer but what I can tell you is that most license plates are mounted under the driver side tail light. In fact, most driver side tail lights even have a bracket for the license plate as well as a light that points down from the tail light to illuminate the license plate. The Low Profile LED RV Tail Light part # RVSTLB61 for example has the license plate mount and light as mentioned above and can then be paired with the Low Profile...
    view full answer...
  • LED Trailer Tail Lights with a Black Base
    For a black base you can use # RVSTLB60 for the right side of the trailer. For the left side of the trailer use # RVSTLB61.
    view full answer...
  • Can Low Profile Trailer Taillight RVSTLB61 Install on Left and Right Side of Trailer
    Yes, you could install two of the trailer taillights # RVSTLB61 at the rear of a vehicle like you are wanting. One can install on either side. The only difference between this and the # RVSTLB60 is the license plate bracket.
    view full answer...
  • Replacement Taillight for Fifth Wheel that Has Raised Center Section
    Hit reply to this with the picture and I'll take a look and see if we have it.
    view full answer...
    Image 1 for
  • Replacement Trailer Clearance Light for Reflect O Lite Number 8
    Yes, the Peterson Clearance or Side Marker Trailer Light w/ Reflector # 423000 matches exactly what you need. It's 4 inch long by 2 inch wide and has mounting holes that are 3 inches apart on center.
    view full answer...
    Image 1 for
  • Availability Of Angled Mount Base For Trailer Tail Lights
    Currently the only angled bases we have for trailer lights are the White # RV60BK and Black # RV60BBK wedges. These will fit either the White # RVSTL60, # RVSTL61 or Black # RVSTLB60, # RVSTLB61 trailer lights. These lights are just over 1" shorter than the Light # 30-92-004 you found. For that light you would need to either find a base in a salvage yard or have one manufactured.
    view full answer...
  • Replacement Passenger & Driver Tail Lights For A 2018 Heartland RV Pioneer Travel Trailer
    I went ahead and checked out what we have for your 2018 Heartland RV Pioneer Travel Trailer, and the closest I was able to find is the: -Low Profile LED RV Tail Light - Stop, Tail, Turn - 9 Diodes # RVSTLB60 for the passenger side, & the, -Low Profile LED RV Tail Light w/ License Bracket # RVSTLB61 for the driver side. These lights measure 8-11/16" long and 3-3/16" wide.
    view full answer...
  • Replacement Brake Light Lens for a 2012 Aliner Ranger 7859
    Thanks for reaching out, Jessica! In the past we've had a replacement lens for the brake lights on an Aliner trailer, but those lens have been discontinued so the best option for you is to completely replace the light assemblies and for that I recommend the following from Optronics: - Driver Side # RVSTLB61 - Passenger Side # RVSTLB60 These measure 8-11/16" long x 3-3/16" tall x 2-1/8" deep and are pretty standard for trailers. We don't have a cover for your AC unit, and we also don't...
    view full answer...
  • How to Determine if License Plate Light is Wired Incorrectly
    Thanks for the detailed description and based on that you did wire the Low Profile LED RV Tail Light w/ License Bracket # RVSTLB61 incorrectly. While it is tempting to match wire colors, you need to match the wires by the function of the trailer lights. The black wire of this light is the tail light and the green is the stop/turn signal light so if you reverse that wiring you will be hooked up correctly. I have added a link to a help article on trailer wiring for you which I recommend...
    view full answer...
  • Replacement Tail Lights for 2019 Palomino Solaire 268BHSK
    Yes, you can use the # TLL160RK on your 2019 Palomino Solaire 268BHSK without having to modify the rear of the trailer. These are surface mount lights so they can sit where the old lights were located. If you want an exact replacement it looks like it originally came with the # RVSTLB61 and # RVSTLB60.
    view full answer...
  • Recommended Replacement Lights For A 2014 Gulf Breeze Ultra Lite 22 TRB With Hail Damage
    It doesn't look like we currently offer the correct lens replacements based on the dimensions you provided and the tail light you have looks like the base would be too broken and would allow water in to replace just the lens so you're looking at a complete replacement for these lights. For the tail lights I recommend the Low Profile LED RV Tail Light w/ License Bracket - Driver's Side # RVSTLB61 and Passenger's Side # RVSTLB60. The clearance lights can be replaced with the Optronics...
    view full answer...
    Image 1 for Image 2 for Image 3 for
  • Replacement Taillight Base for 2015 Coachmen Freedom Express
    The brackets are part of the taillight assembly and only available as an assembly. For the Passenger Side Taillight # RVSTLB60 will be the taillight assembly. I do ask that you confirm the dimensions of the base as 8-5/8" x 3-3/16" rectangle. If that is correct the Driver Side Taillight is # RVSTLB61. If your lights are a different size, let me know and I will help you find the correct size.
    view full answer...
  • Compatibility Of Optronics LED Low Profile Tail Light On Drivers Side Without License Plate Holder
    Yes, the Low Profile LED RV Tail Light # RVSTLB60 is all you will need on the drivers side of your 2012 Forest River Rockwood travel trailer since the license plate has been relocated. The only difference to the Low Profile LED RV Tail Light # RVSTLB61 is the base for holding the license plate and the clear lens at the bottom of the cover for the license plate light. There is no additional wiring used with this light. Be sure that your license plate does have a light on it when operating...
    view full answer...
  • Recommend LED Tail Lights To Replace RVSTB60 Incandescent Tail Lights on an RV
    I recommend switching to the LED Tail Lights # RVSTLB60 and # RVSTLB61. These have the same design as your Incandescent Tail Lights # RVSTB60 so they will also use the same mounting pattern. The Tail Lights # TLL160RK you found are designed for use on utility trailers and boat trailers which use a much different mounting style.
    view full answer...
  • Recommended LED Trailer Lights To Replace Incandescent Lights
    If you are wanting to go from incandescent lights to LED lights, I recommend the Optronics Low Profile Combination Light like part # RVSTLB61 for the driver side and part # RVSTLB60 for the passenger side. These lights have similar but not exact measurements as the Bargman lights, part # 30-92-003 you said you have. The Optronics lights measure 8-11/16 inches long, 3-3/16 inches tall and 2-1/8 inches deep. They are about 1/4 inch longer and about an inch more narrow than the Bargman lights....
    view full answer...
  • Availability of Replacement Bracket for Optronics RV Tail Light # RVSTLB61
    I believe you are referring to the plastic bracket/tabs that are on the back of the Optronics RV Tail Light # RVSTLB61. This piece is not available as a separate replacement part so if your bracket is broken then the entire assembly will need to be replaced. This particular light assembly is for the driver's (left) side and it measures 8-11/16" long, 3-3/16" wide, and 2-1/8" deep. I have attached a short video review that you can check out as well.
    view full answer...
  • What Is The Lumen Output For The Optronics RVSTLB61 And RVSTLB60
    Hello Berry. The light readings for the # RVSTLB60 are on the tail 701 / 296 and the candela is 7.8. On the stop is 706 / 293 and the candela is 97.4. The light readings for the # RVSTLB61 are on the tail 702 / 287 and the candela is 7.6. On the stop is 708 / 291 and the candela is 96.8. Between the other stop, turn, tail lights in this size there is not really any significant differences in lumen output. I recommend sticking with the optronics lights. They are known to be great quality...
    view full answer...
  • Recommended LED Lights for 5th Wheel Trailer
    For the best results I recommend going with all-new LED assemblies for your Grand Design Reflection 5th wheel. While replacement bulbs are an option, you are better off going with a new assembly made specifically to optimize LED lights. Additionally, the LEDs on new assemblies have a lifetime warranty while replacement bulbs have just a 1-year warranty. In terms of brightness levels, brake lights on all vehicles are going to be the brightest because they alert the motorist behind them...
    view full answer...
  • How to Determine Tail Light Replacement for Rockwood Trailer
    Thank you for the photo, and though we have tail lights that will work for you there is unfortunately no database with each part number for each year, make and model of trailer that would allow us to look up what you might have. Instead, you will need to take a measurement to find a matching light although based on your photo we do have one which looks very similar, the LED RV Tail Light w/ License Bracket - Driver Side # RVSTLB61. This light measures 8-11/16" long x 3-3/16" wide x 2-1/8"...
    view full answer...
    Image 1 for
  • Replacement Tail Light Options for 2016 Coleman Lantern Travel Trailer
    It sounds like you are looking for a replacement passenger side tail light for your 2016 Coleman Lantern 274bh trailer by Dutchmen. If that is the case, we have exactly what you are looking for! From my research, it looks like those trailers came with incandescent lights, but could've been upgraded to LED, so I'll give you both options. For an incandescent light, you will want part # RVSTB60. For an LED light, you will want part # RVSTLB60 We also have the drivers side lights if you'd...
    view full answer...
  • Solution for Needing Replacement Lens for Trailer Taillight SAE AISTO1
    Since the lens you'd need part number AST50B is no longer available you'd need an all new assembly which for that the best option is the part # RVST50 since you'd basically only be using it for just the lens as this is the most cost effective solution we have.
    view full answer...
  • Replacement Tongue Jack Switch and Tail Lights For 2020 East to West Della Terra Travel Trailer
    It could be the Switch # EJ-3520-PSW on your Electric Jack # EJ-3520-BBX that will no longer allow the jack to go up. I recommend checking the wiring going into the switch to determine if any of the wires are loose or you have any broken contacts. We have the Low Profile LED RV Tail Light w/ License Bracket # RVSTLB61 for your 2020 East to West Della Terra travel trailer. This is the replacement for the drivers side based on the images I was able to find for your trailer. We also have...
    view full answer...
  • Should I Replace My RV Tail Light?
    Definitely just replace them, simply because the product will start rusting and next you may have electrical issues in the future. The RV Tail Light # 30-92-003 have a 1-Year warranty. Or if you would like a LED upgrade I recommend # RVSTLB61 and # RVSTLB60. Or the white base version # RVSTL61 and # RVSTL60.
    view full answer...
  • How To Choose Correct Replacement Trailer Tail Lights for Grand Design Imagine MK2670
    I do have some options for you as we carry a wide selection of trailer lights but we aren't able to look up what lights any one particular trailer uses as there is no record of this. The best way to find a replacement light for your trailer would be to take some notes of the type (clearance/tail/etc.), size (dimensions), shape (round/square/etc.), and color (red/amber). I have then attached our selection of lights below you can look through and filter using the above info. The Low Profile...
    view full answer...


< Previous



Do you have a question about this Trailer Light?


Info for this part was:

Employee Jameson C
Expert Research:
Jameson C
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Laura H
Written by:
Laura H
Employee Dustin K
Video by:
Dustin K
Employee Cole B
Installed by:
Cole B
Employee Amy B
Updated by:
Amy B
Employee Brian T
Updated by:
Brian T
Employee Chris R
Video Edited:
Chris R
Employee David F
Test Fit:
David F

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.