8-5/8" x 3-1/4" x 2-5/16". Waterproof trailer light illuminates your license plate. Durable ABS housing. Clear lens under polycarbonate housing. Surface mount on 3-1/4" centers with included bracket. 2-Wire design. 5 Diodes.
Features:
Specs:
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the internal components.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're taking a look at the Optronics LED trailer license plate light with the included mounting bracket. Now this trailer light installs above your license plate to illuminate your plate while driving. Makes it a lot more visible, especially during night time or low light conditions.The surface mount, five diode LED light includes a foam mounting gasket and a two wire design, so you have your white wire with the rain terminal on it, that's your ground wire, and you have your black wire, which is your power wire.Now this mounting bracket is a nice durable steel construction. It's also featuring a corrosion resistant design with a black powder coated finish on it. So it's nice, durable, and then the light right here has a nice plastic lens, it's clear, so it allows plenty of light to come through, and then a plastic, black body.This is a LED system. LEDs make great replacements for incandescent lights, they last longer, they burn brighter, they're much more efficient.
With LEDs you don't have to worry about replacing bulbs and you don't have to worry about brittle filaments. The unit features five clear LEDs. A few measurements to go over with you real quick, then we'll hook it up to power and show you what it looks like with the lights turned off.So the overall length measurement, so measuring from edge to edge going this direction, it measures about eight and a half inches. Top to bottom measures about three inches. And I also measured the overall depth of the unit, which is from front to back and got a measurement of about two and a half inches deep.
These mount holes right here, are separated apart from one another other on center by three and a half inches. And then the license plate holes are elongated and they're separated apart from one another on center by six and 3/8ths inches.We're going to go and hook it up to power that way you can see what it looks like with power running to it. Again the white wire is the ground wire, and then the black wire is our power lead. And we can turn off our overhead lights. So you can see here that it sends out a nice consistent signal.
Again, it has five LEDs and the clear lens allows plenty of light to come through. It takes light at a downward angle so that way it will illuminate anything that's underneath the light.This LED light draws 0.045 amps at 12.8 volts. It is Department of Transportation approved and Optronics also puts a lifetime warranty on the LEDs.And that's going to do it for today's look at the Optronics LED trailer license plate light with the included mounting bracket.
Average Customer Rating: 4.6 out of 5 stars (29 Customer Reviews)
8-5/8" x 3-1/4" x 2-5/16". Waterproof trailer light illuminates your license plate. Durable ABS housing. Clear lens under polycarbonate housing. Surface mount on 3-1/4" centers with included bracket. 2-Wire design. 5 Diodes.this product did not work, in process of returning 542990
nice product at a good price. 458840
Looks like very good quality, well packaged and delivered quickly. Haven't installed them yet, but I think it should go well. 508536
Replaced the rear tail lights.on our Keystone Hideout with the Bargman LED tail lights. Didn't have the license plate holder so order the license plate bracket with the LED lights. Works good and looks good too. Works well and illuminates the license plate. 552477
I bought this because I was replacing the low-mounted old-style factory tail lights on my 5th wheel toyhauler with some snazzy narrow LED ones on the sides. This solved the need for separate mounting & illumination of the license plate, to work with the new lights. 674107
This lamp/tag bracket is currently mounted on rear of a street rod and goes all over the south to car shows and so far no problems. I forsee no problems as the quality is excellent. I am very satisfied with everything I have purchased from etrailer. Keep up the good service. 614583
The license plate holder looks good. I was not satisfied with way it was designed to mount. There were only two mounting screw holes, which I didn't feel was adequate for mounting on a travel trailer. The rubber gasket that came with it didn't seem to serve a purpose, for it didn't extend beyond the outer metal edges to seal against water nor did it act as pressure seal between the bracket and mounting surface. LED's work very nicely. Lite up the license plate very well. 550796
Was exactly what I wanted and what should have been on the trailer to begin with! 556192
Nice lisence plate holder. No complaints. It arrived very quickly. Thanks 472778
Nice simple license plate light. We just re did the rear door on my trailer and this light was a very simple install 472411
Works as advertised and at a fair price. Will have to see how it holds up as it seemed a little lightly built. Etrailer is a first class company to deal with. 678497
Very nice product. arrived fast and went on even faster. Thankyou for a Great product. 514494
Michael A - 06/03/2019This product--along with the rest of my order--arrived promptly. Product is exactly what I needed. 738627
Light stopped working after a couple of trips. 734883
etrailer's service cannot be surpassed by anyone! Friendly, knowledgeable, excellent communication to their customers, excellent communication between themselves, if asking for advice they're patient and will guide you in the proper direction even to save you money. 728092
After being submerged for a season in saltwater it’s still going. 725201
Good quality part, seamless installatio n! 690358
A great addition when upgrading to LED rear tail light assemblies. 662785
Looks good and nice to get away from the old bulb style. 647423
Being used on enclosed snowmobile trailer. Old one needed replacing because of running in bad weather all the time, i.e. snow, salt, sand. Very nice and well made. 612005
Good product as said. Good price. Didnt take long to get 605567
Great plate light really bright 600650
Good license plate light. Works as adve rtised. 591564
Love it......lights up great! 524781
so this product seems to be pretty solid. I appreciated the videos with each product as well. I will definitely shop etrailer again 522521
Do you have a question about this Trailer Light?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.