Hey Jeff, yes the Roadmaster Nighthawk All-Terrain Tow Bar #RM-676 is compatible with the Roadmaster Direct Connect base plate kits like what you have on your 2010 Hyunda Elantra #521624-1.
Both the Curt hitch part #13408 and the part #13430 would work well on your 2002 Jeep Wrangler. Both have the same capacities and have 2 inch openings. The differences are that the #13408 uses a different attachment method like you noticed and has a…
From what I have found, there are four bolts holding the fuel tank in place at the back of your 2001 Jeep TJ. The Curt Trailer Hitch Receiver #13408 covers these bolts once it is installed, so it would have to be uninstalled in order to access them…
The biggest difference between Curt Hitch #13430 and #13408 is that the #13430 has a round cross tube whereas the #13408 has a square cross tube. This difference is primarily an aesthetic difference since both of these hitches have the same towing…
To get the best braking power for your boat trailer you would want to have disc brakes on both axles. If you happen to be limited to one axle then you would want the rear outfitted. With a 5,000lb boat you likely have two 3,500lb torsion axles. The…
From what I could find it looks like that gas strut you have is rated for 15 lbs and measures 12" when compressed and 20" when extended. For that the closest option we have is the Gas Shock - 20 lb Force - 20" Extended, 11.41"…
The proper replacement inner assembly member for your UFP 34043 would be indeed be the the Dexter #DX99FR which is compatible with disc brakes. The replacement has an electric lock out and has a 7500K capacity and is intended to work with a 2 inch…
Your trailer must have free backing brakes if you have never used the surge brake actuating coupler reverse lockout. If you did not have free backing brakes, your brakes would most likely brake even if they didn't lock up when you back up because…
Using your rail number as a reference I was able to determine that the Power Gear setup you have is the 523900 so for a replacement motor you'd need the part #LC368417.
Hi Susan, That part number comes up as a 60lb gas strut with a 20" extended length and 10mm socket so the Taylor Made Marine Gas Strut for Boat Hatches #3691843-60 would be a fit. To remove your current strut you'll need to stick a small…
The correct replacement for your 1-065-041012-01 motor is part #LC141893 from Lippert. Your original motor had a 7140 rpm speed. The Stromberg-Carlson #LG-196308 you specified has a 5430 rpm output, so it wouldn't be a good choice. You'll…
Hey Jeff, yes the Roadmaster Nighthawk All-Terrain Tow Bar #RM-676 is compatible with the Roadmaster Direct Connect base plate kits like what you have on your 2010 Hyunda Elantra #521624-1.
Both the Curt hitch part #13408 and the part #13430 would work well on your 2002 Jeep Wrangler. Both have the same capacities and have 2 inch openings. The differences are that the #13408 uses a different attachment method like you noticed and has a…
From what I have found, there are four bolts holding the fuel tank in place at the back of your 2001 Jeep TJ. The Curt Trailer Hitch Receiver #13408 covers these bolts once it is installed, so it would have to be uninstalled in order to access them…
The biggest difference between Curt Hitch #13430 and #13408 is that the #13430 has a round cross tube whereas the #13408 has a square cross tube. This difference is primarily an aesthetic difference since both of these hitches have the same towing…
To get the best braking power for your boat trailer you would want to have disc brakes on both axles. If you happen to be limited to one axle then you would want the rear outfitted. With a 5,000lb boat you likely have two 3,500lb torsion axles. The…
From what I could find it looks like that gas strut you have is rated for 15 lbs and measures 12" when compressed and 20" when extended. For that the closest option we have is the Gas Shock - 20 lb Force - 20" Extended, 11.41"…
The proper replacement inner assembly member for your UFP 34043 would be indeed be the the Dexter #DX99FR which is compatible with disc brakes. The replacement has an electric lock out and has a 7500K capacity and is intended to work with a 2 inch…
Your trailer must have free backing brakes if you have never used the surge brake actuating coupler reverse lockout. If you did not have free backing brakes, your brakes would most likely brake even if they didn't lock up when you back up because…
Using your rail number as a reference I was able to determine that the Power Gear setup you have is the 523900 so for a replacement motor you'd need the part #LC368417.
Hi Susan, That part number comes up as a 60lb gas strut with a 20" extended length and 10mm socket so the Taylor Made Marine Gas Strut for Boat Hatches #3691843-60 would be a fit. To remove your current strut you'll need to stick a small…
The correct replacement for your 1-065-041012-01 motor is part #LC141893 from Lippert. Your original motor had a 7140 rpm speed. The Stromberg-Carlson #LG-196308 you specified has a 5430 rpm output, so it wouldn't be a good choice. You'll…
I like the easy of navigation through the site. It only took me a couple of minutes to place my order. Thank You I will shop this sight again in the future.
Trunk gas struts are essential for easy and safe access to your vehicle's trunk. They ensure smooth lifting and secure holding, making them a perfect replacement for worn-out originals. Ideal for enthusiasts looking to maintain their vehicle's functionali
Yes, trunk gas struts are typically very easy to install, often taking just a few seconds. They are designed to be direct replacements for original parts, so they fit perfectly without the need for modifications. This makes them a convenient choice for quick vehicle maintenance.
Trunk gas struts are designed to be identical to original equipment, ensuring a perfect fit and function. They offer the same level of performance and reliability, making them an excellent choice for replacing worn-out struts without compromising on quality or convenience.
Trunk gas struts provide smooth and effortless lifting of the trunk lid, ensuring it stays open securely. This makes loading and unloading easier and safer, especially when your hands are full. They are designed to match original equipment, ensuring a perfect fit and reliable performance.
When selecting trunk gas struts, ensure they are compatible with your vehicle model and year. Look for struts that match the original equipment specifications for optimal performance. Quality struts will provide reliable support and longevity, maintaining the convenience of your trunk access.
Trunk gas struts are crucial for safety as they prevent the trunk lid from unexpectedly closing, which can cause injury or damage. They ensure the trunk remains open securely, providing peace of mind when accessing the trunk, especially in windy conditions or on uneven surfaces.