Recommended Replacement For Gas Strut 8AU203468BB0267

Question

Question:

Hello Do you carry the industrial gas spring 60lb door spring arm? The one I have has metal rivoted plates at either end that attach by screwing the plate in the both the RV and undercarriage door. When the door is open the spring holds it in place. Part number gs:8AU203468BB0267

asked by: Susan D

0

Expert Reply:

Hi Susan,

That part number comes up as a 60lb gas strut with a 20" extended length and 10mm socket so the Taylor Made Marine Gas Strut for Boat Hatches # 3691843-60 would be a fit. To remove your current strut you'll need to stick a small flathead screwdriver under the small metal retaining clip on the socket head and pry up on it. Prying it up will allow you to pop the socket off of the mounting brackets. When you put the new ones on you can just press them into place without prying on the clip.

expert reply by: Kevin C

0

Susan D.

12/15/2024

Hi Kevin, Thanks while this oart may work do you also sell new metal Brackett’s that attach to the door for the ball/ socket to fit in to? I think mine was made by Industrial Gas Springs and not Taylor. I’m worried the ends won’t have anywhere to connect to because they’ve busted off

Kevin C.

12/16/2024

@SusanD We offer eight different mounting brackets from Taylor Made that would come with a 10mm ball and be compatible with the gas strut I recommended above: Angled: 2" Wide - Black # 3691860 2" Wide - SS # 3691859 2" Wide - SS # 3691883 2" Wide - Zinc # 3691881 Flat: 2-1/4" Wide - Zinc # 3691880 2-1/4" Wide - SS # 3691858 2-1/4" Wide - Black # 3691857 You'll need to check how your current brackets are shaped to pick out the correct replacement. If you don't see a match send me some pictures of your bracket and I can look for a replacement.

Answer 1

The MORryde Quick Connect RV Steps #MR25HR weigh 50 pounds.

view full answer...

Answer 2

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from the…

view full answer...

Answer 3

I spoke with my contact at Lippert regarding the existing Lippert 1716 Pin Box #LC1324791 on your trailer. He stated that you can actually replace the pin box with the Lippert 1116 Pin Box #LC1270271, which is shorter than what you have but uses the…

view full answer...

Answer 4

Hey Claudia, I checked with Curt just now and confirmed that their hitch part #C64DR does fit all models of the 2026 Toyota Corolla Cross which includes the hybrid models so it would work great for you. We also had customers with similar hybrid…

view full answer...

Answer 5

Thanks for your question, James. Both the etrailer #e98948 and Demco #DM9519336 base plates will have a very similar, low-profile look once they’re installed, so neither one really stands out more than the other. They’re both custom-fit for your…

view full answer...

Answer 6

Hey Eric, thanks for reaching out. Yes, we do have a hitch and wiring that will fit your 2026 Nissan Rogue dark armor edition. Here is what I recommend: - etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" #e93ZR…

view full answer...

Answer 7

Hey Karl, thanks for reaching out. Yes, you can get a replacement for the 7-way socket that came with the #ETBC7L kit. For that you'll need the following: - Buyers Products Trailer Connector Adapter - 4-Way to 7-Way RV and 4-Way Flat #337TC1474P…

view full answer...

Answer 8

Hey Michael, congrats on the new SUV. The EcoHitch item #EH87CR does not require you to remove the rear bumper assembly when installing. It does require some slight fascia trimming though. You'll have to remove a 2-3/4” deep and 4-1/2” wide…

view full answer...

Answer 9

Will, you're going to have to find out if the d-rings on your bumper are rated to be flat towed. If they can you can just use an adapter and a set of tow bars and you'd good. Otherwise, you're going to need to install a standard base…

view full answer...

Answer 10

The correct base plate kit for your 2016 Jeep Wrangler Unlimited to use with the Demco Excali-bar Tow Bar 9511006 is the Demco Tabless Base Plate Kit part #DM9519292 which is a custom fit so minimal modifications are required. The arms on the base…

view full answer...

Answer 11

Since nothing corresponds with those part numbers, I recommend measuring your existing struts to find a replacement. For example, the Gas Shock #372-5300-60 measures 20" extended and 11.41" compressed. If you have similar measurements you…

view full answer...

Answer 12

The overall dimensions I'm seeing for the Dometic RM7732 show it being 59-5/8" tall x 33-9/16" wide x 25-15/16" deep. While we won't have a prefect fit we do have the Everchill RV Refrigerator w/ Freezer #324-000119, which can…

view full answer...

Recommended Replacement For Gas Strut 8AU203468BB0267

Product Page this Question was Asked From

Continue Researching