Gas Struts - Boat

Hi David! 5th wheel wiring harnesses, like the 7 foot long Bargman #54700-003 (universal) or #54701-007 (custom fit to your 2022 F-250), are made longer than most other wiring harnesses for convenience. What I mean by that, it allows you the…

Hey Eric, thanks for the information! Your older GE ARC13AACBL2 with 410a refrigerant is not going to be compatible with any AC components that came out this year. Everything has the new R32 refrigerant now so it's made all the 410a systems and…

You will need to select the correct strut based on the weight rating for your current struts. These struts are 36" long from center of socket to center of socket and have the 13mm sockets which are the same as your 1/2". 20LB #3691871-20…

the correct replacement wall controller for your Fan-Tastic Vent 6504-414 is the Replacement Digital Remote Control for Fan-Tastic Vent Roof Vent with 12V Fan #FV9068-81.

Hey Jeff, cool trailer. It sounds like you are already on the right track here, because the Curt TruTrack Weight Distribution System #C17501 is definitely a good option for your Ember 240TKR travel trailer. This system is intended for trailers with a…

Hello Alan, thanks for reaching out. We should have a Roadmaster Reflex Sterring Stabilizer for you, but there is no way for us to look up your VIN. What kind of motorhome do you have? Is it a E-350 Class C? If so, the Roadmaster Reflex RV Steering…

While we don't have replacement parts for a Model 70LP actuator, we do have a great replacement for it. Like the 70LP, these actuators are a fit for a 2" hitch ball, but they just have a slightly larger capacity at 7,500 lbs. You didn't…

Hey, Jeff! I went out to our warehouse to check on this for you. There wasn't a way to keep it compressed but I did get the length from the ball socket to the end of the cylinder and it was 8" long. The ball sockets on the Taylor Made Marine…

The Lippert Motor Home Entry Screen Door Bubble Slider Panel - Frosted #LC234101 measures to your required size at 12 x 12-inches. This part is clear, and it can be trimmed is necessary.

From what I was able to find, the Power Gear 522176 was actually the direct replacement for the Power Gear 523983. What I can confirm is that the Lippert 383745 you mentioned is the same motor (just with a different part number) as the 522176, and we…

I have a few options for you to help with identifying the hub on your trailer. The first and easiest method would be to crawl under the trailer and look for the axle tag on the beam. This should give an axle capacity which we can then use to find the…

The correct replacement motor for your Model 28 Kwikee steps manufactued in 2000 is the part #LC379608. Thank you for including the photo, that always makes things easier. I've linked to a product description video featuring the #LC379608…

Hi David! 5th wheel wiring harnesses, like the 7 foot long Bargman #54700-003 (universal) or #54701-007 (custom fit to your 2022 F-250), are made longer than most other wiring harnesses for convenience. What I mean by that, it allows you the…

Hey Eric, thanks for the information! Your older GE ARC13AACBL2 with 410a refrigerant is not going to be compatible with any AC components that came out this year. Everything has the new R32 refrigerant now so it's made all the 410a systems and…

You will need to select the correct strut based on the weight rating for your current struts. These struts are 36" long from center of socket to center of socket and have the 13mm sockets which are the same as your 1/2". 20LB #3691871-20…

the correct replacement wall controller for your Fan-Tastic Vent 6504-414 is the Replacement Digital Remote Control for Fan-Tastic Vent Roof Vent with 12V Fan #FV9068-81.

Hey Jeff, cool trailer. It sounds like you are already on the right track here, because the Curt TruTrack Weight Distribution System #C17501 is definitely a good option for your Ember 240TKR travel trailer. This system is intended for trailers with a…

Hello Alan, thanks for reaching out. We should have a Roadmaster Reflex Sterring Stabilizer for you, but there is no way for us to look up your VIN. What kind of motorhome do you have? Is it a E-350 Class C? If so, the Roadmaster Reflex RV Steering…

While we don't have replacement parts for a Model 70LP actuator, we do have a great replacement for it. Like the 70LP, these actuators are a fit for a 2" hitch ball, but they just have a slightly larger capacity at 7,500 lbs. You didn't…

Hey, Jeff! I went out to our warehouse to check on this for you. There wasn't a way to keep it compressed but I did get the length from the ball socket to the end of the cylinder and it was 8" long. The ball sockets on the Taylor Made Marine…

The Lippert Motor Home Entry Screen Door Bubble Slider Panel - Frosted #LC234101 measures to your required size at 12 x 12-inches. This part is clear, and it can be trimmed is necessary.

From what I was able to find, the Power Gear 522176 was actually the direct replacement for the Power Gear 523983. What I can confirm is that the Lippert 383745 you mentioned is the same motor (just with a different part number) as the 522176, and we…

I have a few options for you to help with identifying the hub on your trailer. The first and easiest method would be to crawl under the trailer and look for the axle tag on the beam. This should give an axle capacity which we can then use to find the…

The correct replacement motor for your Model 28 Kwikee steps manufactued in 2000 is the part #LC379608. Thank you for including the photo, that always makes things easier. I've linked to a product description video featuring the #LC379608…