Dexter Nev-R-Adjust Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
(2432 reviews)
Price: $258.62
Dexter Nev-R-Adjust Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
Our Price: $258.62
This item qualifies for Free Shipping
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
In-stock alternatives that can ship today
- All Info
- Reviews (2432)
- Q & A (0)
- Photos
Dexter Trailer Brakes
- Electric Drum Brakes
- 3500 lbs Axle
- 10 x 2-1/4 Inch Drum
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Standard Grade
- Dexter
Want brake adjustments that go like clockwork? These brakes automatically adjust as you tow so you don't have to crawl around on the ground to do it manually. 10" x 2-1/4" Assemblies fit 14" to 15" wheels. Made in the USA.
Features:
- Self-adjusting brakes let you maintain optimal braking power at all times
- Ensures reliable contact between the brake shoes and drums
- Prevents uneven wear on brake shoes
- Easier to install and gives you more control than hydraulic brakes
- Requires only an electric brake controller (sold separately) - no actuator or hydraulic lines needed
- Long-lasting brake pads offer excellent braking torque
- Fully bonded to shoes for more consistent braking compared to riveted pads
- Durable magnets ensure consistent braking power
- Encased in a stamped steel housing
- Adjuster plugs (included) protect internal components from dirt, grime, and road debris
- Left-hand (driver's-side) and right-hand (passenger's-side) brake assemblies included
- Includes mounting hardware
- CSA certification ensures quality
- Made in the USA
Specs:
- Application: most standard hub-and-drum assemblies, including etrailer, Dexter, and Lippert (LCI)
- Dimensions: 10" diameter x 2-1/4" wide
- Mounting flange: 4 bolt
- Mounting flange bolt hole distance: 2-7/8" apart on center
- Wheel size: 14" and 15"
- Axle rating: 3,500 lbs
- Limited 5-year warranty
Quick Tip: There's really not a whole lot to getting new drum brakes. If you've confirmed that all of the specs listed above line up with what you need for your trailer, you can be pretty sure these will work for you.
Self-Adjusting Brakes Don't Require Routine Maintenance
With standard electric brake assemblies, you need to manually adjust them every now and then to make sure you're getting the shortest stopping distance every time you tow.
With self-adjusting brakes, though, you'll always have peak stopping power - simple as that! As the brake pads wear over time, a tensioning cable will automatically keep the pads in alignment so they'll consistently make contact with your drum when you brake. You won't have to do tedious manual adjustments anymore.
Thoroughly Tested for Safety
Dexter invests a lot of resources to ensure that these brakes meet the requirements for certification set by the Canadian Standards Association (CSA). Basically, a CSA certification tells you that these trailer brakes are well built and safe for use on the road.
How to Break In New Brakes
Once you get these brakes installed, you'll need to break them in. First, find a long stretch of road or a big, empty parking lot. Once you're there, set your brake controller to its maximum setting and get moving. Speed up to about 40 mph and brake to slow to about 20 mph. Repeat this 15-30 times. The goal is to get the brake shoes and magnet properly seated into your drum. You'll know you've done that when it feels less jerky (and more consistent) each time you apply the brakes.
Note: The brakes will be very hot after doing this, so after every 10 stops you'll want to wait about 10 minutes to let the brakes cool off before continuing. If you don't, you might cook and crack the pad material.
K23-468-00 Dexter Electric Brake Assembly - LH - Driver Side - 10" x 2-1/4" - Self-Adjusting - 3,500 lbs
K23-469-00 Dexter Electric Brake Assembly - RH - Passenger Side - 10" x 2-1/4" - Self-Adjusting - 3,500 lbs
Item # 23-468-469
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Alternate product found
Customer Reviews
Dexter Nev-R-Adjust Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K - 23-468-469
Average Customer Rating: 4.8 out of 5 stars (2432 Customer Reviews)
Want brake adjustments that go like clockwork? These brakes automatically adjust as you tow so you don't have to crawl around on the ground to do it manually. 10" x 2-1/4" Assemblies fit 14" to 15" wheels. Made in the USA.by: James07/19/2023
I placed my very first etrailer order on July 5th for the following items - Dexter Trailer Brake Kit (Code 23-468-469), Easy Grease Trailer Hubs x2 (Code AKHD-545-35-EZ-K) and Redarc Tow-Pro Elite (Code RED63RR). The shipment was received on July 7th but was missing right hand (RH) brake assembly that is part of the Dexter Trailer Brake Kit. The one brake assembly I received, and the Tow-Pro Elite were packed in an e-trailer box. The 2 Hubs were shipped in their product box only. E-trailer provides a nice log of the actions taking place on the order. My order went through 3 individuals (processed by, gathered by, packed by) who ALL missed my order being complete. One of the hubs had broken through the box and was taped back together. At the time, I could not tell if this happened in shipping or not. I found out later that this box had indeed been shipped this way. When I broke the box down to recycle, I noticed white writing on the inside of the box that wrapped up the sided (around the hole that was taped in the box). So, either the manufacturer or e-trailer shipped the box in this fashion. Pictures are attached to show this. I contacted e-trailer support via phone when I arrived home on July 7th and found the items. It was not an issue to get a RH brake assembly on its way to me. The e-trailer rep was not overall concerned with getting me a replacement for the hub. They stated something along the lines of "These are heavy and built to take a beating, let me know if there is an actual problem with it." I received shipping confirmation on July 7th that the RH assembly had been shipped. It wasn't until 7/13 that the RH assembly arrived. I received the first request for a review on July 7th about my order and experience to which I replied on July 10th. I had let them know I had some issues and was waiting for the rest of my missing order to arrive. I also mentioned that both the RH (Code 23-469) and LH (Code 23-468) assemblies that make up my kit were about ~$60 cheaper than buying the kit. Seeing as I received the individual items anyway and not the kit (pics of the e-trailer item sticker to show this) I asked if they could adjust the price for me (both of which are still cheaper today, July 19th). I received an initial response of "I'm sorry, but we would be unable to price match as we are unable to confirm the price of the items when the order was placed." and second response of "I'm sorry, but our prices can change every day due to are algorithm. We are unable to price match after an order has shipped as a result.". I cannot recommend etrailer and this will likely be not only my first, but last purchase with them as well. I thought I was choosing a reputable company but would have been better purchasing my products from Amazon where they are cheaper. Not even pricing matching your own products is another thing (due to their error of sending individual items). The thought of shipping out an already potentially damaged product and a shipping container that is compromised is appalling too. Is it so much trouble to ship the products in an actual shipping box rather than a product box that is not rated for shipment?
by: Douglas 02/25/2023
This is my first ever non-5 star review. 1) picture shows mounting nuts included. Unfortunately they are non-locking, so now I have to go out and get locking nuts or lock washers. Would have been nice to know that. 2) paid $17 extra for expedited shipping. Arrived a day after free shipping was estimated to arrive. Oh well.
Parts are fine, though, and installed easily. Time will tell how they hold up.
by: Shelby01/24/2023
After install of brakes could not get them to work properly. Coils ohm out to 3.2. Ground is good. Tried on 3 different trucks. Any suggestions?
Jenny N.
2/10/2023
I wanted to assist you with the brakes and I wanted to ask a few questions. Can you tell me in more detail how they are not working for you. Have you had the opportunity to bed the brakes, i.e. to break them in?
Shelby
2/10/2023
Yes I have bedded the brakes. I can adjust brakes to the point they are to tight and they will still not clamp down hard enough.
Jenny N.
2/10/2023
I just want to be clear so that I understand - do you mean that they are not braking hard enough or are they not locking up?
Jenny N.
2/10/2023
There are only a few other ideas that I would have to for you to test. It could be that the ground is not strong enough and it is suggested to check the ground wire that is attached to the trailer frame. Making sure that the wire is as close to the magnet at possible and that the ground wire attached to the trailer tongue is on a suitable clean surface. If this does not help I would check the magnets again. I have attached a FAQ below on how we have tested the brake magnets. You can also readjust the brakes so that you get a slight drag when turning by hand versus being so tight that they are hard to turn.
Shelby
2/10/2023
I have a separate white wire for a ground from truck. I did check ohms of each magnet and both read 3.2. I have not read amp draw of each on a battery since ohm reading was good. I have tried this trailer on 3 different trucks set up this way.
by: John 05/07/2024
Installation was straightforward and self-adjusting brakes are the only way to go on the Aliner Expedition travel trailer. I found a crow-foot wrench on a torque handle really helpful, but make sure it is perpendicular to the handle if you want the right torque.
by: Mitch03/18/2018
I was replacing the 20 year old electric brakes on my utility trailer and choose the Dexter Nev-R-Adjust electric trailer brake kit. The non Dexter brand cost less but after adding shipping and adding the nut kit they were the same as the Dexter brakes with free shipping and the nuts were included with the Dexter kit. This was one the easiest projects I have ever done. I had recently replaced the bearings so getting the brake drum off was a breeze. I used butt connectors with the heat shrink insulation wot connect the power to the bakes. I had thought this would be a two day project but did both sides in about 3 hours. And best of all, the new brakes function as they should, it was like I did not have electric brakes before. Again an easy and well worth it project.
Mitch M.
3/18/2019
It has been a year since I installed the Nev-R-Adjust electric trailer brakes and they are still doing a great job. In October Hurricane Michael struck and I have used the utility trailer more than I ever anticipated and have had zero problems from the brakes. Moving equipment & debris became a daily task.
by: Bill08/24/2022
Boxes arrived with holes in them parts bent or missing. BOXES need to be reinforced or double packaged. Why would a LOWES plaster bag be in one of the boxes? Do want to thank you for replacing damaged or missing parts. One box from still not accounted for.
Jenny N.
9/9/2022
I am very sorry that the package arrived this way. I am not sure about about the Lowes bag however I will send this information to our shipping department. I will also have our customer service team reach out to you.
by: Wes 01/05/2023
Great product. Have put about 6,000 miles on the trailer and the brakes are holding up great! Would highly recommend.
Wes
1/7/2024
Still holding up great. No complaints
by: Douglas09/03/2022
The brake kits (2) wheels, were great, It was so much easier to replace everything (drum, shoes, bearings seals etc). The self adjusting brakes work great too, had to play with it a little to get it wright, but that’s easy on a small trailer (Casita). Let me tell you, if you go to a RV shop and have them replace brake shoes and check all other components, you will pay way much more than just replacing everything with new yourself. Oh, the bearing races are preset in the drum, so you don’t have to remove and replace the baring races (that can save a lot of time and effort and special tools).
Douglas
9/4/2023
year 2 and I have had no problems with the brake assemblies, and self adjusting brakes should be part of all camper trailers. Hassle fee!
by: Ronald04/24/2021
Everything fit just right wired up just fine takes a little while to break these things in but once they start biting they work really nice I did a little bit more than just replace the brakes I did the shocks, springs and equalizer then re-painted everything underneath too,pretty much rebuilt the entire suspension sure makes a difference. I'm including some before and after pictures here they're probably out of order but them's the berries folks !
by: Michael02/10/2024
Excellent. etrailer gave helpful information along with a quick turnaround for receiving my order.
by: Steve01/09/2024
Very easy to get what I wanted for my travel trailer. Brake drums and brakes
Fast shipping as well. Will be back to fill other needs.
by: Charlies Service Center08/18/2022
I’m a one bay, one man operation and I see my customer nearly every week and he is still super satisfied with the brakes. While installing them the quality of the product very evident! I have a smaller trailer that I probably don’t need brakes on but if I decide to I’ll definitely be ordering the set from you all!!!
Charlies C.
8/24/2023
My friendcustomer is still very satisfied with the product !! By having brakes now he can transport more than he would have before !!
by: Henry02/01/2024
All the parts arrived in good shape with great packing. I have ordered parts from etrailer many times while redoing two trailers.
Leah has been a great help with payment questions I had and updates.
by: Tom03/19/2022
Replaced obsolete Warner brakes with the Dexter brake kit. Installation was incredibly easy after watching the video
by: David05/14/2018
These brake assemblies were an exact fit for my Dexter Axle. The kit came with everything needed to change it out, including the bolts to attach the brake backing plate. Very straightforward instructions. Fast shipping. I would recommend E-Trailer for any parts.
David
5/15/2019
I recently removed the brake drums to check the brake pad wear and found the pads to be wearing evenly and no adjustment was needed. Self adjusting brakes are the way to go as an easy upgrade to the brake system.
by: Jim08/15/2018
Replaced the Axel Teknology made in China brakes that failed due to poor grease seals with Dexter brand made in USA. All parts made in a ISO 9001 facility. MAGA!
New brakes perform great.
Jim
8/15/2019
Brakes are working great and should for a long time. See more trailer manufacturers are using Dexter now. Buy products made in the USA!
by: X. Ayala02/08/2022
Installed these before taking a long trip up into the Colorado mountains. Amazing upgrade from my original brakes that kept locking up on me. Never having to manually adjust them is a big plus. Takes the guesswork out the picture.
by: Paul12/27/2023
Two of the hubs have areas of missing paint and bare metal in the back. Use the chat feature on my phone because I was at my garage taking the old rusty ones off. Wanted to find out if they needed to be replaced etc. Kaitlyn on the chat was able to pull my account and orders up using my email address but needed the order number to get the correct order. I explained it was literally my last order and was delivered today. No packing list to get an order off of. The phone I had didn’t have my email set up so I could verify the order number. Have her the part numbers. No joy there. Was told to contact them back after I drive home to get it off my desktop. Kind of thinking pretty sad effort. She saw the orders but didn’t know which one had the brakes on it. I’ll update again later once I find out what the deal is with the bare metal. I live in New York so bare metal isn’t the best thing to have in the winter
by: Greg05/11/2024
Shipped in a timely manner, Good quality easy to install.
by: Jim09/21/2022
I am restoring a 1972 Argosy that has been sitting in a field for 30 years. It was the first year Airstream made the Argosy, so it is extremely rare. The first task is to get it moveable and replacing the old non-adjustable electric brakes with the Dexter Nev-R-Adjust brakes at this time makes sense. I have pulled the wheel hubs, cleaned and repacked the bearings, put in new grease seals and almost ready to put the new wheels and tires on. etrailer website and staff have been extremely helpful in finding what I need and shipping it to me fast. Looking forward to many more orders as this restoration moves forward.
by: William10/07/2022
Another seamless project done. Don't know how many orders I made with etrailer.com but it was a lot. All of the trailer lights, Breaks, 7 pin, and all of the camper light, Hold downs ect are from etrailer. Fast shipping very few returns and the camper rear window was already put together which took a while to carefully take apart. Got it apart and installed it no problem. All in all it was a good place to get stuff for the build.
by: Stephen 11/11/2023
Gwen was very helpful and knowledgeable about the brake kits and brake drums that I ordered, and answered all my questions I am very pleased with the quality of the parts and also the way they were packaged and were not damaged when they were delivered.
by: Lance06/04/2020
Good product. I'm a mechanic and I purchased these brakes when installing a third axle to our tandem car hauler. Their construction is good, solid quality components. My initial reaction to these automatic adjusting brakes was that they adjust too tight. This means too much drag when not in use and too quick to respond when used. (i.e., "touchy brakes") I've been a mechanic for longer than I'd like to admit and I'm pretty comfortable adjusting trailer brakes, I do it on a daily basis. These were too tight but better that than not tight enough. I don't recall if the tension is adjustable.
After a year of hauling of loads of all sizes they're still the tightest of the three axles, the other two are manual. (because after 10 years of spectacular service they only needed magnets and drums which were done at the same time as the third axle)
It's not a huge difference, most people wouldn't notice unless they have more than one axle and the other brakes are not the same which you shouldn't do anyway. (yeah, I know.)
So for me now that it's time to check everything for annual inspection I will see how the shoe/drum wear compares and decide to upgrade the others or downgrade these. After all, I said I'm good at adjusting brakes, not that I want to.
These are good brakes, you won't be disappointed.
by: Jeff07/27/2018
Well, you may not see the actual brake controller in these shots, but I wanted to display just how much etrailer product was used to restore this old trailer. Re-decked the trailer, new wheel bearings, added brakes on all 4 with this brake controller and battery powered emergency disconnect... new rust protection, primer and paint, new lights and wiring all the way around, new wiring harness/box, and new tire carrier. Nearly all product except the decking and paint was from etrailer. the customer support was fantastic, I highly recommend this company!
by: Calvin05/28/2022
Original order took 30 days to complete. There was an issue with another item in the order which delayed my install. When I went to install these brakes after finally receiving the correct parts on the rest of my order, the left brake was defective. (Almost cut my hand on it) It has now been 2 weeks since I informed them of the defect. The replacement part still has not shipped. I placed a separate order on the very same day, those items came this week.
Sierra K.
6/3/2022
Customer Service will contact you.
25
2276
Show More Reviews
See what our Experts say about this Dexter Trailer Brakes
- Replacement Bearings, Races, Seals, and Brakes For a Dexter D35 and D44 Axle Both your axles will use the same Grease Seal # 58846. I am going to list all the common replacement parts for each axle so that you have that information. 4,400lb Axle Inner Bearing # L68149 Outer Bearing # LM67048 Inner Race # L68111 Outer Race # LM67010 Grease Seal # 58846 Brake Assemblies # K23-462-463-00 3,500lb Axle Inner Bearing # L68149 Outer Bearing # L44649 Inner Race # L68111 Outer Race # L44610 Grease Seal # 58846 Brake Assemblies # 23-468-469
view full answer... - Replacement Bearings/Seals/Hubs/Brakes For 4400lb Lippert AxleThanks for the picture of your axle tag! I reached out to my contact at Lippert and your 4400lb axle uses the following replacement parts: Inner Bearings # L68149 Outer Bearings # L44649 Grease Seals # RG06-050 Or you can get each of these components together in the Bearing Kit # BK2-100. Since you mentioned you needed these components for four wheels you would just need four of these kits. If you find that you need replacement braking assemblies you would need the # 23-468-469, and...
view full answer...
- Recommended Electric Brake Assemblies and Hub/Drum Assemblies for Dexter 3500 lb AxleFor your PJ Trailer with Dexter 3500 lb axle, I recommend the Dexter Nev-R-Adjust Electric Trailer Brake Kit # 23-468-469 as well as the Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles # 84546UC3. This combination will be a great fit for your axle and will work seamlessly together. I've attached a couple videos to further assist. The brake assemblies will only need to be initially adjusted at install and then will never need to be readjusted for proper fit and use. They will...
view full answer... - Replacement Brake Kit for a 2019 Jayco Jay Flight 145RBThank you for the information! Your 2019 Jayco is equipped with a 3,500 lb axle so to replace the brakes I recommend using the etrailer Electric Trailer Brakes # AKEBRK-35-SA which are self-adjusting. If you want to stick with a name-brand brake kit then you'll want the Dexter Nev-R-Adjust # 23-468-469 brake kit instead. Attached are some installation videos for you to check out.
view full answer... - Is There an Add-On Part to Make Manual Brakes Self-Adjusting?To get the self adjusting brakes, you would need to get the Dexter # 23-468-469. This is a set of right and left hand brakes and will match your current brakes. Unfortunately, there is not a part that can be added to manual adjusting brakes that will make them self adjusting.
view full answer... - Recommended Battery Charger For Trailer Breakaway BatteryYou do need to keep the breakaway switch battery on your trailer tongue charged, but you will not want to charge it with your Progressive Dynamics charger. Instead you will want to use the Replacement Charger for Curt Soft Trac I and II Trailer Breakaway Kits # C52025 which will get wired into your 7-way connector and charge your breakaway battery when the trailer is connected to your tow vehicle. You will wire the red wire to your breakaway battery, the black wire to the 12v power wire...
view full answer... - How Many Of The Dexter Nev-R-Adjust 23-468-469 Are Required For 2012 Keystone Bullet W/ Tandem AxlesEach of the Dexter Nev-R-Adjust Electric Trailer Brake Kit - 10" - Left and Right Hand Assemblies - 3.5K # 23-468-469 you were looking at include a left and right side braking assembly. Since your 2012 Keystone Bullet Premier 31' has two axles you would need to order a quantity of two kits. I included a few videos of the # 23-468-469 for you to take a look at.
view full answer... - Timbren Axle-Less Trailer Axle with Brake and Hub/Drum Assembly RecommendationsSince you're needing to add electric brakes to your T@B trailer you want to go with the Timbren # ASR2KHDS01 which has the brake mounting flange whereas the Timbren # ASR2000S01 doesn't have provisions for the brakes. Then for brakes you can use the Dexter Axle Set # 23-468-469 and then 2 of the Hub and Drum Assembly # 84546UC3-EZ. Attached are some installation videos for you to check out!
view full answer... - New Brakes for 3500lb Henschen Torsion AxleHenschen has been out of business for quite some time now but their 3,500 lb axles did use standard bearings/hubs for that capacity so you can use a hub like the part # 84656UC3-EZ which does have the 6 lug bolt pattern you are needing. Then for electric brake assemblies the part # 23-468-469 would be all that you'd need. This would be much easier than trying to convert to electric over hydraulic.
view full answer... - Building a Trailer with the Timbren Axle-Less Suspension SystemTo build this trailer with the Timbren Axle-Less Trailer Suspension System - 4" Lift Spindle - Regular Tires - 3,500 lbs, part # ASR3500S06, there are a few changes that need to be made to ensure everything is compatible. The hub and drum assembly that this suspension system is compatible with is the Dexter Assembly for 3500 lb E-Z Lube Axles, part # 84656UC3-EZ. This assembly has a 10" diameter and a 6 on 5-1/2" bolt pattern. It's compatible with 13" - 16" wheels, and the bearing, races,...
view full answer... - What Size Nuts Are Needed To Secure 10" Dexter Nev-R-Adjust Electric Trailer Brake KitThe Dexter Nev-R-Adjust Electric Trailer Brake Kit part # 23-468-469 uses 7/16"-20 nuts. We do offer these, the Mounting Hardware part # BRKH10B.
view full answer... - Is Timbren Axle-Less Suspension TASR35HDS04 Compatible With 3500 Hub and Drum Assemblies?I have another option for you, but the Timbren Heavy-Duty Axle-Less Trailer Suspension - Straight Spindle - Regular Tires - 3,500 lbs # TASR35HDS04 you were looking at actually uses 5200lb hub and drum assemblies and is not available with the 5 on 5" bolt pattern you mentioned. Instead you will need the Timbren Axle-Less Trailer Suspension System - Straight Spindle Only - 3,500 lbs # ASR3500S05. This option takes standard 3500lb hub and drum assemblies, so for one with the 5 on 5" bolt...
view full answer... - Troubleshooting Self-Adjusting Trailer Brake Assemblies That Won't Lock UpTrailer brakes are not designed to lock up contrary to many comments. If they were not under load and just free spinning on a jack then they should lock up, but when weight is on them and they are rolling you don't want trailer wheels to lock up. If they did, you would lose traction and your trailer would be out of control. You want a consistent braking pressure that doesn't lock but rather brings the trailer to a stop without locking because this controls the braking and keeps the traction...
view full answer... - Dexter Self-Adjusting Brakes 23-468-469 Seem WeakSo there could be a number of different issues behind why your Dexter Nev-R-Adjust Electric Trailer Brake Kit # 23-468-469 feel weak. First, let's start with the more obvious, which is the wiring, specifically, a ground that is loose or weak from the brakes. If your ground is good, check the voltage with a multimeter like # PT89ZR to ensure that the power wire to the magnets is getting the full 12 volts. Also, since you mentioned an exhaust brake, and I'm wondering if this was used when...
view full answer...
- How to Determine Correct Electric Brakes For 3,500 lb AxleWe can get you the correct replacement brakes for your 3,500 lb axle, but just to be sure you are getting the right fit, there are a couple of things you will want to verify. First is the size of your drum, which when you measure it needs to be 10 inches in diameter and the inside should be at least 2-1/4 inches wide, which is highly likely since you have a 3,500 lb axle. Next you want to check your brake mounting flange, and it should have bolt holes that are 2-7/8 inches apart, like...
view full answer...
- Replacement Electric Brake Assemblies for 3,500 lb AxleYes, the Dexter Nev-R-Adjust Electric Trailer Brake Kit # 23-468-469 will work for your 2007 Keystone Outback 25RSS. The 023-027-00 you mentioned is a reference to the right hand side Dexter Electric Trailer Brake Assembly # 23-27 which has the same dimensions and fit as the Brake Kit you asked about.
view full answer... - Replace Hub/Drum and Brake Assemblies for Lippert 3500lb AxleFor a 3,500 lb Lippert trailer axle we have exactly what you'll need for new hub/drums and brake assemblies. For a hub/drum with a 5 on 4-1/2 inch bolt pattern you'll want the Dexter Hub part # 84546UC3 which will be a confirmed fit and will work great. For a set of brake assemblies confirmed as a fit you'd then want the part # 23-468-469.
view full answer... - Available Trailer Brake Assemblies Compatible With Lippert 122460 3500 LB Capacity Hub/DrumThe Lippert 122460 you referenced is a standard 10 x 2-1/4 inch brake hub for a 3500 axle. It has a 5 lug on 4-1/2 inc bolt circle and is compatible with a L44649 outer and L68149 inner wheel bearing and a 1.719 ID grease seal. We offer compatible hubs as part # AKHD-545-35-EZ-K. We don't offer Lippert brake assemblies, but the etrailer brand brake assemblies you'd looked at, part # AKEBRK-35 include the left and right brake assemblies that would definitely be compatible with your existing...
view full answer... - Will Dexter Axle Brake Assembly 23-468-469 with Single Spring Work for 2020 Model CamperDexter Axle actually has a new design (July 2020) for their brake assemblies and they moved to the single spring and gray magnets like what you see with the part # 23-468-469 you're looking at. I checked with our photo department and the double spring is the previous design.
view full answer... - Replacement Hubs and Drum Brakes For a 2021 NuCamp TaB Trailer Using Dexter Axle PartsThank you for providing the Dexter part numbers Robert. For the brakes we have the Kit # 23-26-27 which contains both the Left # 23-26 and Right # 23-27 brake assemblies. You might consider upgrading to the Nev-R-Adjust Electric Trailer Brakes # 23-468-469 so you will no longer have to adjust the brakes every 3,000 miles. They will self adjust giving you much better brake feel as the pads wear. For the hub/drum we have the Dexter Trailer Hub and Drum Assembly # K08-426-91. The difference...
view full answer... - Brake Shoes for Trailer with 10 inch by 1-1/2 inch Brake AssembliesLooks like you have a welded on brake assembly that possibly could have the brake shoes replaced with the part # BP04-065 which is for an older Dexter 10" by 1-1/2" setup that was made before 1999. See if you can find "Dexter" written anywhere on the assembly. I attached a review video for this for you to check out as well.
view full answer...
- What Dimensions Are Brake Mounting Flanges for 10 Inch Brake AssembliesI recommend that you perform any measurements with a digital calipers; I'm fairly sure that this might be the reason for the discrepancy in measurements. Brake mounting flanges are a standard size and if you've got Dexter self-adjusting brakes on your trailer those would use a standard 4 bolt mounting flange like the ones found on the Dexter Nev-R-Adjust # 23-468-469 (both driver and passenger side assemblies). I've also linked a photo that shows the standard dimensions of a 4-bolt brake...
view full answer...
- How to Prevent Sagging on a Travel TrailerWe do have a solution for your 2015 Keystone Hideout 27DBS's sagging leaf springs. They are called SumoSprings and they provide progressive load support that gives you additional support as needed. They work great to balance off center loads like the issue you are experiencing. It sounds like the passenger side of your trailer is noticeably heavier because of a slide out or kitchen. The SumoSprings act as shock absorbers, taking the brunt of bumps and rough roads. We have two options...
view full answer... - What Is the Torque Spec for the Castle Nut On a Dexter AxleThere is no torque spec for the castle nut on most trailer axles. The nut will simply be snugged up until there is no side to side play in the hub and then backed off the next notch until the retainer or cotter pin lines up. We actually have a video that shows this process part-way through.
view full answer...
Do you have a question about this Trailer Brake?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Edited by:
Lindsey S
Installed by:
Jeff D
Installed by:
Robert C
Video Edited:
Kathleen M
Updated by:
Wilson B
Updated by:
Hannah L
Updated by:
Noah M
Written by:
Alexander C
Written by:
Ryan F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Douglas
2/26/2024
Brakes still work fine after about 5000 miles. I would buy them again.