Grease Cap - 1.988" Outer Diameter - Drive In
(195 reviews)
Price: $4.06
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (195)
- Q & A (0)
- Photos
TruRyde Trailer Bearings Races Seals Caps - F001518
- Caps
- Standard Grease Cap
- TruRyde
Grease cap fits trailer hubs with 1.988" inner diameter and has corrosion-resistant zinc plating.
Features:
- Grease cap for trailer hubs
- Drive-in installation
- Corrosion-resistant zinc plating
- 22-Gauge steel construction
Specs:
- Quantity:1
- Flange diameter: 1.988"
- Crown height: 0.94"
- Flange length: 0.218"
- Overall height: 1.156"
Dimensional Information
| Part No. | Material Gauge | Flange Diameter (A) | Crown Height (B) | Flange Length (C) | Overall Height (D) |
|---|---|---|---|---|---|
| 1500 Series | |||||
| F001518 | 22 | 1.988" | 0.94" | 0.218" | 1.156" |
001518 Fulton Zinc Plated Grease Cap, 1.988" x 0.218" Flange
Customer Satisfaction Score:
100% were satisfied with this product
0% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Product did not meet expectations
Customer Reviews
Grease Cap - 1.988" Outer Diameter - Drive In - F001518
Average Customer Rating: 4.7 out of 5 stars (195 Customer Reviews)
Grease cap fits trailer hubs with 1.988" inner diameter and has corrosion-resistant zinc plating.by: John08/17/2023
High quality product(s) delivered sooner than promised. The merchandise arrived in good condition. They are a perfect fit for my Dexter 3500# axles. I have ordered many items for my RVs, my SUV and pickup over the past 14-years. I have never been disappointed with eTrailer's offerings and customer service. Thank you eTrailer
by: Fred10/23/2023
Excellent parts service and customer service. These folks are friendly, professional and knowledgeable. Received the parts and discovered one of the parts was damaged in shipping. Contacted them and Neil was on it immediately. The part is on the way. I will always buy from this company.
by: Kens LBC03/27/2024
I had greaseable caps that allowed water to seep in a ruin the bearings.
These caps look good and make a watertight seal. This is not a boat trailer and does not get exposed to a lot of rain or snow.
by: Bill07/10/2023
I am rebuilding an old trailer and was lucky enough to get Justin on the phone. Hel listened to my needs and searched until he found the hanger bolts and bushing the fit my equalizer perfectly. He is a real pro! The trailer is coming along great thanks to your great staff
by: Jared 07/13/2023
Basic cap for the trailer bearing, fit tight as expected
by: Daniel_San Mateo_California04/10/2017
I ordered 3 Taskmaster 4.80-12 Bias Trailer Tire with 12" White Mod Wheel - 4 on 4 - Load Range C (Item # TTWAS12B4WMHP) on a Saturday. To my surprise they shipped them right away. The packaging was perfect and the wheels look strong and well made. This little kit trailer (cargo box is 60"x40"x24") has once been in a 3000 mile trip around the West, and the 8" wheels where almost 20 years old so I decided to get fresh tires and ordered the 12" wheels. I'll probably have to give the fenders a little more clearance but that's OK. I'm very happy with the product and service. Thank you guys!
by: TMBFarm12/09/2017
It all started about 10 years ago when I purchased a custom built trailer. The trailer is great, but one of the stub axle/wheel kits they put on was missing a race. By the time I got the trailer home -- about 7 miles -- the dust cap was missing. Later I pulled off the wheel and noticed the race was gone and I replaced it and the bearing. I purchased several dust caps locally, all of which were supposed to fit. None of the ones off my old vehicles would work. After losing several more caps, I ordered these. Thinking I would lose them fairly quick, I ordered extras. When the box arrived, I examined the caps and was pleased with the quality. I took the beer can off the wheel and carefully hammered a new cap on. Well, now after pulling the trailer a lot, on many bumpy and bad roads, this cap has not loosened a bit. I highly recommend these caps.
by: David M in CT09/11/2023
Arrived as advertised, prompt, good fit, wearing well. Would definitely buy again.
by: Mike03/28/2022
Couldn't be happier !!
I went to {online store] and took old one in with me, they had to order it in and $XX.00 freight to boot. It showed up wrong and they wouldn't credit the freight back.
I went online and order here and no problems and received sooner than expected.
Top customer service and yes, now marked in my favorites for future use.
Share a smile
CERNdog
Micheal E.
3/29/2023
Its been a year and that grease cap is still going strong. I havent had a single problem and have painted it to match my STEELERS GOLD rims. Thanks for such a great product and service.
by: Ed07/02/2022
I Installed two sets on my 14 foot Trailer. In the mountains of NC, brakes dont seem to last on the truck. I use the truck and trailer for pick up and delivery of Ventracs, that weigh in at around 1500LBS. The trailer empty will actually stop the truck now. (I use the Redarc trailer brake controller).
Not having to constantly adjust them is a major plus also. I did wire both axles indepentanly of each other to the junction box. If I happen to have a wire get torn loose, I will only lose braking on one axle and not both.
They were a little expensive, but will save me from replacing the brakes on my truck twice a year.
Over all, I am glad I got the two sets.
by: Phillip01/02/2023
Item arrived quickly. The cap was a little loose, but I was able to take a hitch pin and flare the edge of the cap slightly. After that it fit perfectly. Thanks etrailer!
by: RWJ09/30/2014
I measured the hub and order the grease cap. It was installed using a piece of PVC pipe and a dead blow hammer and it sealed tight and looks great.
Rwj
9/30/2015
Great
by: Triggs,08/12/2023
Great product, great customer service
by: James05/03/2023
Thank you for a fast response. Item missing and quickly shipped missing item. This is business integrity that builds trust and confidence.
Thank You
Jim Foy
by: Jimmy M07/18/2017
They fit my hubs and keep the grease in for a good price. Not much else to say. I did go to the hardware store and get a pipe fitting to drive them in so I didn't dent them during installation.
by: Dianne L.05/26/2017
All the products were exactly what I needed to repair my trailer. After a little glitch in the order I contacted customer service and the problem was immediately resolved. I will definitely be shopping again when/if I need parts.
by: Rosemarie01/29/2022
Fast ship. Very thorough shipping info.
Dave
1/30/2023
Great but had to alter them to fit.
by: KRAZY KARZ02/01/2016
It Was Great. It Got Here Before I Ordered It. Perfect Fit.
by: Kevin Moa10/21/2017
The bearings and race i have ordered are the perfect fir for our trailer. They are the identical match for the 1969 dilly, verry pleased with the price overall great kit. I would defiantly recommend to anyone replacing bearings and races for the 1969 dilly.
by: Craig A.05/09/2014
Grease cup as advertised. All parts arrived in good condition except one. One break plate was missing the strain relief on the back. All break plates had nicks on the two green wires where they exit out the back as if the wires were nicked during installation and bent 90*. Thank you for the links to installation of the items for they have been helpful.
by: Lee L07/28/2017
Thank you so much for replacing the damaged components in such a timely manner! The grease caps have been installed and the boat is in the water. I have been using etrailer for quite a while and have never been disappointed. This is my "go to" vendor for all of my trailer/towing issues.
by: 09/29/2022
Trailer gets very little use, caps work as they should.
by: P.I.E. Prospecting 04/29/2013
Got two sets of bearings and new dust caps for our trailer works just fine and at this price couldn't go wrong, arrived quickly fit as expected what more can be said there bearings
by: Shagbark09/18/2016
I ordered a hub cover for my trailer. Product was what I ordered and was delivered in an appropriate amount of time. When ordering I was concerned shipping costs were going to be high for a very inexpensive part, which occurs through other sites. However, shipping was relatively inexpensive. Good value and experience.
by: Lawrence R06/04/2021
These came with a bearing kit I ordered for my trailer and they don't fit. My trailer dates back to the 60;s and the hubs are cast aluminum and, apparently almost impossible to find parts for.
25
195
Show More Reviews
See what our Experts say about this TruRyde Trailer Bearings Races Seals Caps
- Grease Cap Replacement Recommendation for a 363182I was able to pull up the dimensions of the grease cap you are looking for, part number 363182 and found that it's dimensions match the part # F001518 so this cap would work well for you.
view full answer... - Can Standard Grease Cap Replace EZ Lube Grease Cap on TrailerStandard grease caps that are made the correct diameter you need like the part # F001518 would work well to replace the ones you have now. The EZ lube caps are not any deeper than standard grease caps.
view full answer... - How to Determine What Size Grease Cap is NeededIf you can provide the reference number for the OUTER wheel bearing, I can determine which replacement grease cap you actually need. You can also use a digital caliper to find the exact inside diameter of the hub bore. With a standard grease cap, the next larger size from the 1.98 inch is a 2.25 inch, which is quite a bit larger. If you're speaking of a bearing protector like the Bearing Buddy, the next largest size from the 1.98 is the 2.047 inch. If you click the provided link, you...
view full answer...
- Determining the Size of Grease Cap Needed for AxleIn order to determine the correct grease cap for your axle, you will need to measure the inner diameter of the hub where the grease cap presses in. I recommend using a dial caliper or another precise measuring tool since this measurement will have to be precise. Keep in mind that you will want your grease cap diameter just slightly larger than the inner diameter of the ring of your hub, but no more than about the 2 one hundredths of an inch, to ensure a secure fit. I have attached a link...
view full answer... - Replacement Grease Caps for 2007 Rockwood Freedom Model 2280 Tent CamperReplacement grease caps can be selected by measuring the diameter of your hub's bore. There are also several types offered. Trailer manufacturers may change some of the components they use on any given product; the only way to know the exact original part is to contact Rockwood with your camper's VIN number. An easier way is to use a precision digital caliper to measure the bore of your hubs. Once you know that you can use the link provided to choose both the type and size you need.
view full answer... - Removing Rusted Grease Caps from a Trailer HubOften times, especially if they are rusted, grease caps will take quite a bit of convincing to remove. When they are this stubborn, often times the caps will be destroyed in the process of removing them. Sometimes we beat them pretty hard in our shop or use a screwdriver to wedge them out. The only way to know if the Fulton Grease Cap, part # F001518, will fit is if you measure the inside diameter of the trailer hub. It should be 1.988 inches. It may be a little smaller due to rust, so...
view full answer... - Grease Caps Needed for 2013 Keystone Cougar High Country Travel TrailerIn order to determine the correct grease cap for your 2013 Keystone Cougar High Country Travel Trailer, you will need to measure the inner diameter of the hub where the grease cap presses in. I recommend using a digital caliper because your measurement will have to be precise. Unfortunately a collective OEM trailer parts catalog does not exist, so the best way to determine what parts you will need is to obtain the information directly from the trailer parts themselves. I have attached...
view full answer...
- Availability of Grease Caps or Bearing Buddies for Craftsman Lawn TractorIf you can reply with the inside diameter of the hub bore, I'd be happy to check if we offer any grease caps or Bearing Buddies that would work. You'll need to use an accurate measuring device like a digital caliper. A ruler or tape measure wouldn't be accurate enough.
view full answer... - How to Pick Out Replacement Grease Caps for a Trailer HubYou will want to use a dial caliper or micrometer to measure the inner diameter of the hub you have on your trailer to determine what size cap would be needed. Check out the picture I attached that shows this measurement being taken on a hub. I attached a link to all the grease caps we offer, once you know what size you need check out the link I attached to see all the sizes we offer.
view full answer...
- Correct Standard Grease Cap for Dexter 10" Hub for 3,500 AxleThe Grease Cap - 1.988" Outer Diameter part # F001518 is correct for a Dexter 10" Hub for 3,500 Axle.
view full answer... - Replacement Grease Cap For Malone MicroSport TrailerHello Chris. The Grease Cap # F001518 will indeed be a suitable replacement for the Malone MicroSport trailer. The MicroSport uses a standard 5 on 4-1/2" hub and these hubs use the also standard 1.98" grease caps. The # F001518 cap is not made by Malone but it will be virtually identical to the caps on the MicroSport trailer.
view full answer... - How to Determine What Replacement Grease Cap is Needed For a Premier Dual Axle Dump TrailerI'm assuming you're speaking of a grease cap that's driven into the hub bore. Grease caps are available in different sizes. There are two good ways to determine which size you need. One is to locate the reference number off of the outer wheel bearing. Finding the outer wheel bearing would lead me to the reference number of the race, which would lead me to the grease cover diameter. Or, you could use a digital caliper like # PTW80157 and measure the inside diameter of the hub bore, as shown...
view full answer...
- Replacement Grease Cap for Gulf Stream Vintage Cruiser Travel TrailerFinding a grease cap for your Gulf Stream Vintage Cruiser Travel Trailer will require measuring. You can either measure the outside diameter of one of your existing grease caps or the inside diameter of the hub bore where the grease cap installs. These needs to be a precise measurement so make sure to use a digital caliper like # PTW80157. For example, if the outer diameter measurement was 1.988" you could use the # F001518. Once you have your measurement you can use the link below which...
view full answer... - How to Measure to Determine Correct Trailer Hub Grease CapYou will want to use a dial caliper or micrometer like part # PTW80157 to measure the inner diameter of the hub you have on your trailer to determine what size cap would be needed. Check out the picture I attached that shows this measurement being taken on a hub. I attached a link to all the grease caps we offer, once you know what size you need check out the link I attached to see all the sizes we offer. The closest cap we have to what you listed is the part # F001503 which has an outer...
view full answer...
- Replacement Dust Cap for Hub of Malone LowMax TrailerFor the Malone LowMax trailer the correct replacement dust cap is the part # F001518.
view full answer... - Is There a Special Tool Or Trick To Installing Trailer Grease Cap On Trailer Hub? One simple trick to help install the Grease Cap # F001518 from the Timken Bearing Kit # TMK34ZR is to put the cap in the freezer. The extreme cold temperature will actually cause the steel to shrink slightly making it easier to get the cap started. Be sure to clean both the portion of the cap and hub where they fit together as any lubricants on the surfaces will actually make it harder to install since they add to the thickness. Also if you have a large socket which fits over the cap but...
view full answer... - Recommended Bearings, Seal, And Grease Cap For Lippert 3500 lb AxleAccording to Lippert, the items in # BK2-100 bearing kit are the correct parts needed to replace the bearings on one hub of your Lippert axle. For a dust cap, you will most likely want the Grease Cap - 1.988" Outer Diameter - Drive In # F001518, but I recommend measuring your hubs to confirm.
view full answer... - What Grease Cap Fits a Malone EcoLight Trailer # MAL53FR? The Malone EcoLight Trailer # MAL53FR uses the Grease Cap # F001518
view full answer... - Wheel Bearing Cap 1.988 Diameter I recommend the TruRyde Grease Cap item # F001518. These grease caps are 1.988" Outer Diameter, have an overall height of 1.156" and a crown height of 0.94 inches. This is the largest crown height available in a 1.988 inch diameter.
view full answer... - Comparing TruRyde and Fulton Grease Caps for Trailer Hubs with 1.988 Inch BoreThere is basically no difference between dust cap set # RG04-020 and single cap # F001518 other than # F001518 is a single unit and # RG04-020. They otherwise have the same dimensions just from two different manufacturers.
view full answer... - Bearing Buddy Recommendation to Replace a 2-3/32 Diameter Grease CapIf the measurement you listed (2-3/32 inches) the only caps we offer that would work would be a Bearing Buddy part # BB2080SS. We do not have any standard grease caps that would fit.
view full answer... - How to Measure for Replacement Grease Cap on TrailerYou will need a Digital Caliper # PTW80157 to measure the inner diameter of your hub. Here are the most commonly used size grease caps. If you have threads or a different size please let me know what you have so I can show you your options. 1.988" # F001518 2.446" # F001520 2.722" # F001526
view full answer... - Grease Caps With Outer Diameter Smaller Than 1.988 InchesWe do have a grease caps that are smaller than those with a 1.988 outer diameter like the Grease Cap # F001518. In order to know the correct fit for certain you will need to use a digital caliper and take a measurement, but I'll go ahead and list out the smallest size grease caps we offer so you can try and match up the correct size. - 1.957" Outer Diameter: Grease Cap # TRAG-DC-196 - 1.943" Outer Diameter: Fulton Grease Cap # F001524 I have also added links below to video reviews for...
view full answer... - What Might Cause a Grease Cap to Keep Coming Off of the Hub Assembly On a Boat TrailerI would recommend to remove and reinstall the complete trailer hub assembly to make sure all of the parts are installed properly. I am including a link to a video of how to remove and reinstall a trailer hub on a boat trailer. This video will show you how to take off the hub assembly and how to properly put it back on and tighten the spindle nut. The spindle nut on the end of the spindle should be held on with a cotter pin or tang washer. If the cotter pin or tang washer is missing that...
view full answer...
Do you have a question about this Trailer Bearings Races Seals Cap?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Patrick B
Expert Research:
Jeff D
Expert Research:
Jameson C
Expert Research:
Adam R
Video Edited:
Chris R
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Tmbfarm
12/12/2018
These caps are still on my trailer after many more miles of bumpy roads and pulling through pastures with high weeds and brush. Still very pleased.