How to Measure for Replacement Grease Cap on Trailer
Published 03/23/2023
Products Featured in This Question
Question:
How do I measure a trailer hub to get the correct grease cap
asked by: Bonnie T
0
Expert Reply:
You will need a Digital Caliper # PTW80157 to measure the inner diameter of your hub. Here are the most commonly used size grease caps. If you have threads or a different size please let me know what you have so I can show you your options.
1.988" # F001518
2.446" # F001520
2.722" # F001526
expert reply by:
Bud M
0
Product Page this Question was Asked From
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Continue Researching
- Q&A: Dimensions of CES38WR Spindle
- Q&A: Looking For Replacement Leaf Springs For Sure-Trac Pro Series Trailer
- Q&A: Greasable Shackle Bolt that is 3-1/2 inch Long and 9/16 inch Diameter
- Q&A: Replacement Bearing And Seals For UFP Hub H-1062-2
- Q&A: Recommended Bearing Kit for a 3,500 lbs Axle on a Boat Trailer
- Article: How To Measure And Replace Everything In Your Hub Assembly
- Q&A: Replacement for Dexter Grease Seal 010-019-00
- Q&A: Correct Replacement for UFP H-1377 Trailer Hub
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Maintenance Schedule
- Article: Trailer Lighting Requirements
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub