To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
This Yakima SkyLine setup comes ready to go with everything you need for a solid roof rack foundation—two JetStream crossbars, four SkyLine towers, and a custom fit kit. The system mounts directly to your vehicle’s fixed mounting points for a tight, dependable fit. With a 165 lb weight capacity (always follow your vehicle’s roof load limits), it’s built to carry everything from kayaks and cargo boxes to camping gear with confidence.
The aluminum crossbars have an aerodynamic shape that helps reduce wind drag and noise while you’re driving. Rubber strips in the top channels push down as you load accessories, then spring back into place—no trimming required. Those same strips help quiet vibration and airflow, so your drive feels smooth and the rack doesn’t whistle.
Some racks make you trim rubber channel inserts before you can mount accessories—these don’t. The JetStream bars use push-down channel strips that let you press mounting hardware directly into the tracks. It keeps setup simple, cuts prep time, and keeps the bars sealed against wind and weather once your gear is mounted.
Each crossbar measures 50" long x 2-3/4" wide x 1-1/8" tall and is made from sturdy aluminum for lasting strength without adding unnecessary weight. The silver finish looks clean and resists corrosion over time. This setup is ready for regular use on road trips, outdoor adventures, or everyday hauling.
You can secure the entire rack with Yakima Same Key System (SKS) lock cores, sold separately. They deter theft by locking the towers to your roof and keep your investment protected when you’re parked at a trailhead or hotel overnight.
Alternate Instructions
Ratings & Reviews
Easy to install. No noticeable noise from the bars. Seem to be very sturdy.
Fit our Subaru Forester perfectly. Install was a breeze. For the money I wish they came with the core locks.
Excellent service!! I needed new crossbars as I purchased a new vehicle and l needed them in a hurry and I did receive them thank you.
Thank You for the prompt delivery, I just need the Landing pads to do the installation. It looks like they may be coming on Monday which would be awesome.
Thank You
As said in my other review these etrailer guys helped me where the Yakima customer service and sales people couldn't.
The crossbars are light and very strong. They fit perfectly and installed easily.
These crossbars were easy to install and adjust. Be sure to get all the pieces you need. There is no mention of the Landing Pads necessary to use these.
I have a Buick Envision and it seemed as if it would be difficult to get the correct rack, but it turned out to be easy. I entered my vehicle info and was directed to the Yakima Skyline with flush rails. It was easy to install and they look great. I will be able to take my canoe out with no problem! Joe
Good condition quality. Good and detailed instructions but aittle tedious install.
Because of the 'rona-induced supply chain interruptions, I was unable to purchase all of my Yakima components from etrailer, but I did get these, and they are typically excellent Yakima components. Well-made, easy to install, good directions, no problems.
Awesome experience and product! It shipped fast and was easy to install using the directions and a recommended video. Plus, it looks super hot attached to my white Honda Accord Coupe 2016. (I leave it on all year round.) Love it and etrailer!!
I purchased the Baseline towers with base clip fit kit and jetstream crossbars. They were great quality and the instruction materials included for assembly and installation were great. I was able to assemble and install on my Lexus CT 200 in about an hour. It looks nice too!
Yakima SkyLine Towers are well-designed and well-executed. They easily fit into the Yakima Landing Pads and form a tight fit when closed. And they also fit nicely into the Yakima JetStream Crossbars when following the Yakima instruction manual and various YouTube videos. I did run into a snag at first where I found the rubber seal on one SkyLine Tower getting caught on the JetStream Crossbar track, but after that I was careful not to let that happen with the other towers.
I find the appearance of the Yakima SkyLine Towers to match their level of quality in materials and design.
I chose the Yakima roof rack, because It spanned 50 inches, rather than the leading competitor's 47 inches, making it better for tying down 4 ft x 8 ft sheets of building material. It also seemed to be about half the price. It took me about 2 hours to put it all together and mount it on my car. The instructions were all visual and there was one little pic I didn't understand, but the equipment seemed to go together correctly anyway. Now that it's adjusted, it should be fairly easy to remove and replace next time. I did need to put on super tacky gloves to get the covers off. Although it seemed unnecessarily complicated, I would still choose this product again.
Yakima Jetstream cross bars.. nice bars worth the extra money. can be adjusted for pitch/angle of attack to "tune" the air profile.. mine have absolutely no high speed wind noise or whistling.. rubber weather strip underneath further smoothes the bar profile.. quietest roof rack system I have ever owned..
Very nice quality towers. Very heavy duty! They have a cool "snap" on / off mechanism for quick removal and installation.
I needed crossbars for my new 2018 Mazda CX5, which came with flush side rails. The Yakima crossbars, along with the RidgeLine Towers and the the vehicle specific kit worked great. The installation (10-15 min) is super easy. They look cool, and performed great (I strapped 160-lbs rooftop tent on them!). Removing them is also super easy (10 min tops). Highly recommend.
These hard to find landing pads fit perfectly on my 2021 Highlander. Quick ship/great communication from site.
etrailer installation videos were very helpful in selecting the product and first installation, although in practice, minor adjustments to method were required. Now after more than a dozen set ups, mounting the crossbars takes 15 minutes, and taking them off, 10. The system is well made, and when mounted, precise, strong, and reliable. Expensive perhaps compared to alternatives, but well worth the money. Used to carry a 50# sailboard 40 miles to the beach on weekends. ('11 Honda Fit)
One minor shortcoming: rubber sheet glued to base clips where they touch the car body have torn and moved sideways 1/16", but expect will be easily replaced with readily available 1/16" sheet rubber (e.g., shower pan liner) when the time comes.
Used in rain at least once, (sustained 60mph), with no leaks.
Great product - very good quality. I liked the fact that I could keep the risers mounted on my car, but could remove the cross bars. It took me awhile to install - but I'm not very mechanically inclined.
Yakima Baseline with Yakima CBX 18 Cargo Box fitted on my 2012 Toyota Corolla S Sedan 2012.
Instructions were clear and roof rack was easily installed.
I’m using these towers in conjunction with the JetStream cross bars. Assembly and setup was easy, all the tools you need are provided, except perhaps a tape measure for mounting. Looks and feels solid and well made. This is my second set of Yakima towers and cross bars. I plan to use this setup for an old roof top hard shell case and for my mountain bike to get to the trail head.
After completing the installation I took it out for a spin to check for wind noise at highway speeds. No discernible noise, I’m very happy about that as I really don’t want to remove these when not needed. For reference these are mounted on a 2019 Subaru Forester Touring with factory raised rails. Plenty of clearance for attaching equipment and gear.
Side note: the gentleman that assisted me on the phone while ordering was very pleasant and helpful, got me the right products very quickly as I was in a time crunch. Two thumbs up!
The 50” jetstream cross bars were perfect for my 2019 Ford Ranger with my ARE cap. They are paired with the Yakima Skyline towers and appropriate landing pads (protip: call etrailer when you order to ensure you have the correct setup;)
These cross bars are SILENT on my cap. Zero wind noise. My daughter and I installed them on a Friday (I do recommend watching etrailer’s installation video in addition to the paper instructions) and left for a 700 mile weekend road trip the next day to pick up a kayak, paddle with friends downstate then drop her off at summer camp.
Even with empty Yakima Jaylows on top, no wind noise. Even with a boat in the Jaylows, no wind noise.
These are the sweetest rack’s I’ve had. With the Skyline towers and landing pads, they are also easy to take off and put on. Click click done.
They look good, too;)
etrailer customer service for the win, too. When I originally ordered, I did not order all the items I needed for installation. When I realized this, I called and they got me squared away.
A good product. Very easy to install. I installed them in about 15 mins. They fit secure to the Highlander rail system. No gaps. The caps stay on going thru the car wash. They raise the bars up high enough so the sun roof can be opened all the way with rack accessories. I have an existing skyline system with 66" round bars from my previous truck that I purchased in 2005. The existing system matched the landing pads perfect. I am not sure if I will shorten the bars or not yet.
The Yakima rack is a great product, fits perfectly on my Toyota Highlander, and looks great. The only complaint is with the install instructions, all pictures, no text explanations which would have been helpful.
Do you have a question about this Roof Rack?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.