To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Mount this 7-way, RV-style connector in your truck bed for quick, simple hookup of your 5th-wheel or gooseneck trailer. Custom harness plugs in-line with your existing factory wiring so that you can retain use of your vehicle's factory 7-pole.
Features:
Specs:
California residents: click here
Average Customer Rating: 4.8 out of 5 stars (850 Customer Reviews)
Mount this 7-way, RV-style connector in your truck bed for quick, simple hookup of your 5th-wheel or gooseneck trailer. Custom harness plugs in-line with your existing factory wiring so that you can retain use of your vehicle's factory 7-pole.2022 ram 3500 long bed. Was perfect length if you install it on the rear driver side of bed. In the video i saw of someone installing it they cut the hole then shoved the double connector end of the harness down from the bed. I found it easier to fish a string down the hole and then tie the string to the clip part of the single side of the harness and pull it up. That plug has to go through the hole straight or else it gets caught up and having the string tied to the clip helps pull it up and through the hole straight.
This order was for ITEM # C53CR which has the filler plate. The order somehow was changed or substituted for this part which works for the application but without the filler plate.
etrailer sent the filler plate separately and I performed the install which was fairly simple and with the plate installed looks completely like factory. I attached my camper to the bumper connector and all worked, I could not reach the bed connector due to cable length, this was set up for a new 5th Wheel we are purchasing. I am confident that is will work.
I used different wire ties, something a little more substantial than what was provided but that is my choice. Watch the install video, it is fairly straight forward, 30 minutes from start to finish for my install.
4 stars due to the confusion in the order but was eventually straightened away.
Great kit to add a trailer connector in the bed of your truck. Super easy to install, took 30 minutes start to finish.
Super fast install. Great product. I have a 21 Ram crew short bed and the 7’ is the way to go. 35 min install. Tested and works great. Instructions call for a 2-1/8 hole. I was able to use the 2” hole saw and remove and reinstall the grey plastic wire cover from the Y.
Product was delivered sooner than scheduled. Excellent customer service! My second time using etrailer with outstanding products, service, and results.
very easy to intall.the box it came in i was wondering if it was going to work the box was torn open
Super easy to install, plenty of wire to put the harness where ever you pretty much want in the bed. Quality wiring harness and connectors.
Anthony
3/14/2023
Plug and play, no cuttingsplicing wires. Highly recommended. Plenty of extra wire to put the plug where you want to in the bed. The trailer cord is held very securely in place. Installed on my 22 Ram 2500
Excellent service super fast shipping and just like the instructions say plug and play super clean look very satisfied with the product would buy again . Bought this for my son’s 2006 Ford F-350
Very easy to install. Works wonderful for plugging in fifthwheel so there is no wiring over tailgate. And still able to maintain oem plug.
Joe
3/16/2023
Excellent product! It was a very easy install and works awesome with existing wiring.
Worth every penny. Quality is great and it’s a true plug and play. Have had it over a year and no problem. About a 10 minute install
I used this to tie-in my truck cap lights and power. I modified it with the connector for the truck cap. A year later still working great.
Arrived today. Shipping was great and item makes for easy install for my 5th wheel RV.
Couldn't be any easier. This made my 5th wheel hitch install a breeze and impressed the wife! HAHA. Thanks again.
Installed on 2017 Ram 2500 easy bolt on install,very well made, best part made in USA.
After a year and 8000 miles use the Curt wiring harness is working just like new. Seems very much like an OEM quality or better product.
I like the replaceable connector end, and the 90 degree harness end that joins it, but 7' of wire for my application is about 3' too long. Extra wire just increases resistance. Would be nice if they made a 4' version.
Easy install. I would emphasize using a good high quality hole saw. Makes all the difference.
It worked great,so good I took it off my truck I traded in and putting it on my 2022 f-150.I buy all my trailer and truck equipment from etrailer,good products and service! Fast shipping also!
Charles
3/17/2023
Great,still working as it should.
Very easy to place an order. These people work hard to help you get it right. However, my package arrived empty. Packing tape was slit and box arrived with nothing in it. Within 2 hours of contacting etrailer.com, I had a new package being shipped. Before I could even email them pics of the empty box, my new replacement order had already arrived!
That's freaking customer service! They definitely remember who the customer is, and I will continue to use them every chance I get.
Installation was very easy and straightforward. It took about 10 minutes; once the spare tire was out. The hardest part was taking out and putting back in, the spare tire. If you have a 5th gen Ram that didn’t come with a gooseneck plug, there should be a plastic cover where it would be. Pop that out and your hole for the wiring is already there. There will be four small squares in the corner. The plug that is mounted to the firewall has enough clearance, so you can mount it to the bed using the provided self-tapping screws.
I purchased this unit after reading the reviews. I received both the C56070 and a B&W OEM hitch within a few days of placing my order. Etrailers’s customer service is excellent! The installation of this wiring harness took about twenty minutes including cutting the hole for mounting. Everything but the hole saw was included in the package! I am very pleased with my purchase!
Be sure to watch their installation videos prior to purchasing, they give real insight into the process!
The plug in is located in the bottom left corner of the photo!
Nice product. Very simple install. Requires 5 holes to be drilled. All plug-and-play design. Even comes with zip-ties to tie it all up.
Great product! a 10 for sure.
The 7 foot cord was more than adequate. Good quality product. I installed on 2019 Ram 2500 Big Horn.
I will tell you dont even try the install without lowering the spare tire. Even if you are able to fish the wire over (like I did) you will not be able to make the connection to the existing 7 pinn on the bumper. the plug adapter is wired in such a way that you cannot get your hand and the wire in the right orientation. The install of the unit will be less than an hour and probably closer to 30 min.
One last tip, when reinstalling the spare be careful not to push the tire to far to the front there is a thin metal shroud that the tire will rub on and squeak over every little bump. test it before you are done, ask me how I know. LOL
Install was very easy, wish it would come with some of that gel you’re suppose to put inside of it. Just needs a little and no need to buy a whole big tube of it. Haven’t used it yet but was everything I needed for my Fords new gooseneck. Didn’t want to plug it in at bottom of bottom of bumper
Nicolas
4/15/2021
Has worked great
This harness is excellent. It plugged right in and looks like it should last a while. It also included plenty of zip ties and the necessary mounting screws. The hardest part was mustering up the nerves to drill a 2-1/8” hole in the bed of your truck. After drilling the hole, I put touch up paint on the bare metal to prevent rust. I also put silicone sealant in the screw holes, after they were tapped, to seal the metal there too. Install was quick and easy with the right tools; just the hole saw and a drill driver with the appropriate socket for the mounting screws.
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
William
8/15/2023
Still works great to hook up my fifth wheel connector in the bed of the truck instead of having it hang over the tailgate.