These strong, galvanized steel crossbars supply the backbone for this Yakima roof rack. The rack works with accessories that clamp around the bars. Vinyl coating helps resist corrosion. Installs on your vehicle's naked roof. Great Prices for the best roof rack from Yakima. Yakima BaseLine Roof Rack for Naked Roofs - RoundBar Crossbars - Steel - Black - Qty 2 part number Y59PJ can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
All Info
Reviews (62743)
Q & A (0)
Related Parts
Photos
Yakima Roof Rack
- Y59PJ
Highlights
Custom Fit for Your Vehicle: Installs on your roof with a kit designed for your vehicle.
Complete Roof Rack System: Includes 2 RoundBars, 4 BaseLine towers, 4 adapters, and a custom fit kit for your vehicle.
Strong Steel Construction: Galvanized steel bars with black vinyl coating resist corrosion for lasting durability.
Ready for Accessories: Round crossbars work with carriers and gear that clamp around the bars.
48" of Load Space: Provides ample room for kayaks, cargo boxes, or camping gear on your roof.
Lock-Ready Security: Works with Yakima Same Key System (SKS) lock cores (sold separately) to deter theft.
Features to know about
Haul Heavy Loads with Confidence: Strong Steel RoundBars
When you’re carrying kayaks, canoes, or a loaded cargo box, you need bars that won’t flex under pressure. These Yakima RoundBars are made from galvanized steel to create a solid backbone for your gear. Each bar is coated in black vinyl to help resist corrosion and keep them looking clean after years of weather exposure. With a 165-lb weight capacity, you can count on them to hold steady through long highway drives or rough backroads.
Built for Naked Roofs: Secure, Custom Fit Installation
Not every vehicle comes with factory rails, and that’s where this system shines. The Yakima BaseLine towers and custom fit kit give you a stable, tailored setup for a naked roof. The design spreads the load evenly across the mounting points so your gear stays put without damaging paint or trim. Once installed, the rack feels like it belongs there—solid, level, and ready to go.
Ready for Every Adventure: Works with Clamp-On Accessories
These round crossbars are compatible with a wide range of accessories that clamp around the bars. That means you can load up kayaks for summer paddling or swap in a cargo box for your next road trip without changing your setup. The simple round profile makes it easy to attach racks, cradles, or holders from different brands so you can use the gear you already own.
Add Theft Deterrence When You Want It: SKS Lock Cores Sold Separately
If you like leaving your car parked at trailheads or campsites overnight, you can add Yakima Same Key System (SKS) lock cores (sold separately). They secure the rack to your roof using one key across the system, giving you peace of mind when your gear is out of sight.
Specs
Dimensions
Crossbar dimensions: 48" long x 1-1/8" diameter
Weight and Capacity
Weight capacity: 165 lbs
Color
Color: black
Construction
Construction: steel
Warranty
Limited lifetime warranty
8000408 Yakima Round Crossbars - Steel - Black - 48" Long - Qty 2
8000162 Yakima BaseLine Towers for CoreBar, JetStream, and RoundBar Crossbars - Bare Roofs - Qty 4
8006136 Custom BaseClips and Pads for Yakima BaseLine Towers
8003536 RoundBar StreamLine Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4
WARNING: This product may contain Phthalates and Antimony Oxide which are known to the State of California to cause cancer. For more information, visitwww.p65warnings.ca.gov
Customers Who Purchased This Roof Rack Also Bought...
etrailer rocks! Great customer service and support. All pieces worked as promised and for my vehicle.
A bit disappointed that Yakima towers do not have a height adjustment so I can make both round crossbars level to keep my canoes from catching too much air on the highway. My vehicles roof flush rails are are curved vertically and change widths front to back. Had to Mickey Mouse the back crossbar to make it higher with PVC brick moulding.
Also the tower covers with the Yakima label don't clip on strongly enough so I had to add duct tape because I did not trust them to stay on. 3487234
Like that I can use the bar from my Yakima rack and with base mod can fit it to the rail on my new car. Appreciated Eli's help in putting my order together to be able to make this conversion. 3644631
by:
La
07/01/2026
Products great. Service and delivery from you company was not acceptable. when I placed my order you missed your delivery date by five days. Not sure how this happened, but requested help was not available. 3576224
by:
Geriatric sailer
10/03/2026
High quality. Adapter to use modern towers with my 2003 round tube cross members. 3637512
by:
Sally
06/29/2024
These convertors will allow me to continue to use my hullavator system currently on round bars. The drop in feature of skyline towers makes the whole change out a snap. Certainly better than buying a whole new hullavator. 3167956
Sally
6/30/2025
Perfect. It makes changing out to load my kayak super simple.
by:
Paul
08/24/2026
Solid and easy to instal3613552
by:
Nick D
05/16/2017
Have been rocking my Yakima rack from etrailer.com for a year now. I am using rack in conjunction with a Tepui tent. Once I added the air deflector, I would say it's the perfect setup. The Yakima gives more clearance over the factory rack, so I was able to get my hands under it to secure the tent hardware. If you're thinking of upgrading your factory rack, I would not hesitate to use etrailer.com 2820563
The Yakima roof rack system is an Outstanding product. I purchased the product to replace the OEM roof rack because it was too flimsy to carry the tandem bike mount and my bike. The Yakima roof rack is solid and provides me the peace of mind while hauling my bike on the roof of my car. etrailer provided the product for the best price as always. 2820588
Customer service was extremely helpful in finding the exact replacement parts needed for my old car! 3401085
by:
John P.
08/29/2018
2017
Volkswagen
Golf
Bought as a pkg for my 2017 Golf R with Round Bars since I had a bunch of Yakima bike racks and a canoe gunwale rack for my old Yakima set up. Installation was easy with good instructions. All measurements from the Yakima site appear to be spot on.
etrailer.com shipped these out quickly and all parts arrived without damage. 2820545
Great product haven’t had any issues with it. Would highly recommend that anyone that’s looking for a roof rack system and a great seller at etrailer 3270966
Brooke M.
2/26/2025
Thanks, Eric! Glad the crossbars have been working well for you :)
by:
Charles
02/09/2024
Toyota
4Runner
Kimberly has shown that great customer service is not dead! etrailer and Kimberly are great to work with and have earned my business and will always be the 1st and last place I look for my rack+ needs! As for the application, I needed more space to fit my cargo box on top of my 4Runner TRD Pro’s rack. I came up this this… Thank you! 2820758
Product works as advertised thus far. When you buy the yakima towers, you are required to purchase these as well to fit the rounder bars (I feel sure there are other adapters for other bar shapes). These should have come with the towers in my opinion, and I resented having to shell out more $$ to purchase these "must have" adapters to mount my bars. 3 star overall rating based on function, price. Delivery and packaging was top-notch through etrailer. 2820737
by:
Fabe Red
03/12/2017
Loved the Yakima roof rack system. It's been a year and it is still going strong. Such an easy install and it looks great on my truck. My Yakima Skybox 16 sits perfectly atop the roof rack. My drives to The Sunshine State are all the more pleasurable and comfortable. My cargo area now has plenty of extra space since I load up my skybox 16 which sits perfectly on my Yakima roof rack system. The service from Etrailer was awesome. Thank you guys for your customer service and for selling such great products. I would recommend Etrailer to anyone. 2820570
by:
Kyle
10/23/2024
Great UX for finding the options matching my car, and the baseline towers work great. Simple straightforward site, will plan to use them again when needed.
For those also buying crossbars for cars without roof rails, recommend taking a silver sharpie and marking the placement of the crossbars on the weather seal at the top of the door openings. Makes putting them back on way less of a hassle if you don’t want them on 24/7. 3220931
by:
Kyle
10/23/2024
Great UX for finding the options matching my car, and the crossbars baseclips work great. Simple straightforward site, will plan to use them again when needed.
For those also buying crossbars for cars without roof rails, recommend taking a silver sharpie and marking the placement of the crossbars on the weather seal at the top of the door openings. Makes putting them back on way less of a hassle if you don’t want them on 24/7. 3220934
by:
Paul
07/09/2019
2019
Toyota
Sienna
Installation of the hitch, wiring,rear bike rack, and new roof rack towers went well. I didn't set any speed records, but I was more concerned with doing no damage on a new 2019 Toyota Sienna AWD van. The hitch fit up well per instructions except that I was able to work around the exhaust without lowering it. Underbody panel and rear fascia did both need to be removed. Very happy with the end result. The new van is now set up to haul the bikes and canoes and move my log splitter. 2820725
by:
Martin
11/12/2022
etrailer is excellent...however, not too pleased with Yakima and these cross bars - second set in four years...they make them out of a steel that rusts quickly...better out of stainless or aluminum. Maybe that is their idea of planned obsolescence. I also learned not to install end caps...that accelerated the corrosive process. 2820547
by:
Mark K
05/16/2017
What can one say with Yakima products and how etrailer supports you, (or me), the customer. The Yakima round bar cross members and towers are great. Supports the weight and very little wind noise. Shipping was quick and undamaged.
If I need certain products I come to etrailer first and even after price checking others they can't be beat. 2820586
by:
SDW
07/21/2012
Subaru
Forester
round bars and the Gunwale Canoe Carrier Brackets on the advice of friends who have used a Yakima rack for years. I want to carry a canoe on my Subaru Forester, equipped with factory flush mounted rack, but needed something wider to hold my canoe, which is 38.5" at its center. This system is just the thing. It installs easily and the towers fit my the contours of my factory siderails perfectly. The Gunwale Brackets adjust with a twist-knob to snug up to the canoe for a secure fit. Once they're adjusted to the correct width, loading the canoe is easy-ever-after.
Note: the endcaps are included in the RailGrab package, as are two cam straps, so you don't need to buy these. At $300 for everything, etrailer has a great price, and the order was on my porch in less than a week. Emails to customer service were answered promptly, and a follow-up email to ask about my experience prompted me to write this very enthusiastic review. Thanks! 2798805
The Thule Hullavator Pro # TH898 can fit round bars by grabbing around the crossbar and can fit aero shaped bars if the bars have a channel on top of them. Which the Yakima aero shaped bars don't have top channels so to go the Yakima route will require round bars which includes the part numbers # Y00408, # Y53TR, # Y03536, and # Y00241 and you'd be set. view full answer...
The factory roof rack on the 2016 Subaru Outback Wagon has minimal options to fit the factory roof rack which is different than the factory side rails or flush mounted rails. You can use the Landing Pad 15 for Yakima Control Towers - Qty 4 # Y00241 which will allow you to simply remove your factory crossbars and mount these pads in their place. Then you can use the SkyLine Towers for Yakima Crossbars # Y53TR and round bar adapter # Y03536 if you want to use round bars like the 48 inch... view full answer...
Since you have Yakima tracks like the # Y01126 installed on your 2014 Ford F-150, a great option is the Rhino-Rack Roof Rack for Thule and Yakima Tracks - 2 Heavy-Duty Crossbars - 65" # Y01-140B-NT. The Rhino-Rack HD crossbars provide you with 220 pounds of maximum weight capacity. There are no other heavy duty crossbar setups that are compatible with the Yakima tracks that have a larger weight capacity (or go over 165 pounds).
Even though Yakima cannot confirm for sure, my representative... view full answer...
You need a complete roof rack wtih crossbars to mount the Rhino-Rack Pioneer Platform, part # RR42115BF, on your ARE topper.
Since you already have Yakima tracks you can use four of the Control Towers, part # Y8890027, with two sets of Landing Pad 1, part # Y00221. Then choose the round crossbars at the proper length:
48 inches # Y00408
58 inches # Y00409
66 inches # Y00410
78 inches # Y00411
86 inches # Y00420 view full answer...
The Yakima roof rack you referenced part numbers # Y00408, # Y28TR, # Y03536, and # Y06148 is a confirmed fit for your 2017 Honda Accord sedan and would be an excellent option for carrying a roof cargo box. Then for a cargo box the Thule Force part # TH6357B would fit this rack and work great. I attached a review video for this box installed on a similar sized vehicle as your Accord sedan.
I really like the Thule roof racks and cargo baskets as they are very well made, easy to use, and... view full answer...
Rola roof rack R4000 actually mounts to side rails on vehicles so if your 2017 GMC Terrain has a naked roof then it will not work. The most cost effective option for models with a naked roof is from Yakima using the following parts:
Crossbars # Y00408
BaseLine Towers # Y28TR
RoundBar SL Adapter # Y03536
2 of BaseClip fit kit # Y06146 view full answer...
Hey John,
To mount Yakima RoundBars to your Telluride's flush rails you'll need the following components:
SightClip Fit Kit # Y34UR
SightLine Towers # Y64AR
RoundBar SL Adapter # Y03536
Yakima recommends their 48" RoundBar # Y00408 or 50" aero bar for the 2022 Kia Telluride so you'd have quite a bit of overhang if you go with 58" RoundBars # Y00409.
Flush rail towers are typically being screwed into fixed mounting points or clamping down into a slot so they actually are a bit more... view full answer...
For your 2007 Honda Accord you would simply select sedan for the 4 door version. The Yakima system for your vehicle will be the Baseline roof rack. The Q-Tower and Q-Clip fit kits were discontinued a few years back.
My recommendation for you consists of the following Yakima parts:
JetStream Crossbars - Aluminum - Black - 50" Long # Y00425
BaseLine Towers # Y28TR
BaseClip Fit Kit (front) # Y06159
BaseClip Fit Kit (rear) # Y06143
I also recommend adding locks # Y07204 view full answer...
There are a couple options for a cargo box setup on your 2018 Nissan Murano SL with a bare roof. As far as the box, I recommend the Yakima SkyBox 16 Roof Cargo Box - 16 cu ft # Y95AV or the Yakima SkyBox 21 Rooftop Cargo Box - 21 cu ft # Y07337. The great thing about the SkyBoxes is that they include the SuperLatch system that ensures the lid is latched closed and locked. With this mechanism, the key cannot be removed unless the lid is closed properly. In addition, the SkyBoxes include... view full answer...
While we do have roof racks that fit your 2019 Toyota Camry with a naked roof the Rola you mentioned is not a fit as it fits Honda Civics. Instead the most economically priced rack we have that does fit your vehicle is the Yakima BaseLine roof rack part numbers # Y00408, # Y28TR, # Y03536, and # Y06192. At this time (June 2019) there aren't any Rola roof racks that fit your vehicle. view full answer...
Andrew, we currently only carry round bar crossbars from Yakima. For your 2024 Toyota 4Runner you will need the Towers # Y33TR , RoundBar Adapters # Y03536 and then to select the length of the crossbars you want from the list below. I do see your 4Runner is 75.8" wide not including the side mirrors.
48" RoundBars # Y00408
58" RoundBars # Y00409
66" RoundBars # Y00410
78" RoundBars # Y00411 view full answer...
Yes, there absolutely is! I have listed the parts below you will need to add a Yakima roof rack, with round bars, to your 2024 Chevy Equinox with factory raised side rails. Not sure what length of round bars you have so I threw in the ones we have for reference.
TimberLine Towers for Yakima Crossbars - Raised, Factory Side Rails - Qty 4 item # Y33TR
RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4 item # Y03536
Yakima RoundBar Crossbars - Steel... view full answer...
From the looks of your photo, you have the Side Loader Mounting Brackets for Yakima 1A Raingutter Towers # Y08002. I confirmed with my tech at Yakima that the Yakima 1A Raingutter Towers (QTY 4) # Y00101 fit these Kwik-Rail mounts. For theft-deterrence, I recommend the Yakima Same-Key Lock Cores # Y07204.
If you need Yakima RoundBars to go with the towers and the brackets, I recommend one of the following crossbar sets:
- Round 48" CrossBars for Yakima Roof Rack System # Y00408
- Round... view full answer...
Yes, they can Eric. The Side Loader Mounting Brackets item # Y08002 are designed to recreate rain gutters like you see on cargo vans. They do not require a specific angle to be functional. What you will want to look at is where you can mount them, and how far apart you need them to mount various items like bike racks, canoes, kayaks, cargo boxes, baskets or any other accessory. These are sold as a pair.
Here are the rest of the parts you'll need to complete the roof rack:
1A Raingutter... view full answer...
For a crossbar system that will be able to accommodate a roof top tent on your 2021 Subaru Forester, I recommend the following parts:
- Yakima JetStream Crossbars - Aluminum - Black - 50" # Y00425
- TimberLine Towers for Yakima Crossbars - Raised, Factory Side Rails # Y33TR
- (optional for theft-deterrence) Yakima Same-Key Lock Cores # Y07204
With this Yakima crossbar systems, you will be able to accommodate a rooftop tent up to a maximum static weight capacity of 600 pounds. If the... view full answer...
While there are not instructions available for removing the Yakima BaseLine Towers Y00146 from your 2016 Honda Civic I would be happy to walk you through the removal process.
This will require the tightening tool that was included with your BaseLine Towers, but if you do not have the tool you can use a long 4mm Hex Wrench.
First you are going to want to remove the end cap from the tower, if you have the Yakima SKS lock cores # Y07204 you will need to unlock the cores, or if you have... view full answer...
William, if you have the round Yakima Roundbars # Y00408, then you will need the RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers # Y03536, the SkyLine Towers for Yakima Crossbars # Y53TR, and the Landing Pad 23 for Yakima SkyLine and Control Towers # Y98FR. view full answer...
We have the Yakima roof rack components needed to install in the tracks on top of your Leer 100XR camper shell.
To complete your roof rack setup you will need:
quantity 2 of the Landing Pad 1 # Y00221
quantity 4 of the Control Towers # Y8890027
and depending on the length of your cap
quantity 2 Crossbars like:
48 inch # Y00408
58 inch # Y00409
66 inch # Y00410
78 inch # Y00411
To lock your roof rack to your tracks, I recommend the set of 4 lock cores with keys # Y07204. view full answer...
Since the Yakima CoreBar # Y00421 does not have a t-slot to accept the standard load stops like # 753-3761, and due to its shape the LoadStop Brackets for Yakima Round Crossbars # Y05000 won't work either, leaving you with no compatible option.
In order to use the load stops # Y05000 with your MightyMounts # Y03590, you'd need a different set of crossbars # Y00408 with the adapter # Y03536.
I know it's not ideal, but due to the uniqueness of your crossbars that is your best option. view full answer...
The components in the photo you referenced are from Yakima. Yakima's artificial rain gutters are the Side Loader Brackets # Y08002.
The roof rack towers for the rain gutter system are the Yakima 1A Raingutter Towers # Y00101, which come in a quantity of 4. These towers are designed for use with the Yakima RoundBar crossbars.
Yakima crossbars come in a variety of lengths. Depending on how much overhang of the crossbar you want, the Round 58 Inch Crossbars for Yakima Roof Rack Systems... view full answer...
It is not a huge deal to add a few new mounting holes to the bottom of an ABS plastic cargo box like the Yakima SpaceBooster. A cordless drill and appropriately-sized drill bit will make short work of it. I would avoid using a heated implement for making the holes since it could be a bit messy and could make it harder to control the size of the hole.
The things to keep in mind are that you want to drill no more additional holes than absolutely necessary so measure, check and re-check.... view full answer...
I spoke to my Yakima contact and he informed me that you will need the Landing Pad 1 # Y00221 for the tracks on your Leer camper.
To complete your roof rack setup you will need:
quantity 2 of the Landing Pad 1 # Y00221
quantity 4 of the Control Towers # Y8890027
and depending on the length of your cap
quantity 2 Crossbars like:
48 inch # Y00408
58 inch # Y00409
66 inch # Y00410
78 inch # Y00411
To lock your roof rack to your tracks, I recommend the set of 4 lock cores with keys # Y07204. view full answer...
Depending on what Thule Ski Rack you have currently, the Mounting Kit for Thule Flat Top Rooftop Ski and Snowboard Racks # 7533998 may work for you if you have the Thule Flat Top #TH724 (DISCONTINUED), or the Thule Flat Top #TH725 (DISCONTINUED).
You're going to want to verify that you do have either of those ski racks first.
This mounting kit will your Thule ski rack to the Yakima Roundbars # Y00408.
You're also going to need the Replacement Round Nut for Thule Carriers # 853-5439. view full answer...
Yes! Out of the variety of fairings that we have to offer I recommend the 40" long Inno Fairing # INA261 because it will fit perfectly with the 38" long Rola Sport Series Roof Rack # 59757 for your 2009 Honda Accord.
If you let me know what you are wanting to use the roof rack for I can make additional recommendations for you. I have also attached an installation video and a picture of this roof rack on a 2009 Accord Sedan that you can reference. view full answer...
Yakima has a really great roof rack for your 2019 Hyundai Santa Fe with a naked roof with the Baseline JetStream bar rack part numbers # Y28TR, # Y06151, # Y06154, and # Y00425 (see attached picture). This will give you an extremely high quality roof rack that has aero bars which will give you minimal wind noise.
Then for a ski rack we have the FatCat EVO part # Y03096 which will hold 6 skis or part # Y03095 for up to 4. I attached a review video for this carrier for you to check out as well. view full answer...
Hey, Nick!
Happy to help out. The best and easiest kayak rack to use with a load assist is the Thule Hullavator Pro # TH898. One big advantage is that everything is built into the carrier itself, here are no extra parts to remove or store. Personally, I’m not a fan of other load-assist options like the Malone DownLoader # MPG114MD-351XL, since you have to store the Telos legs inside your vehicle while traveling. That’s especially inconvenient if you’re working with a smaller vehicle.
I... view full answer...
According to the specs I have, you may have fixed mounting points on those rubber strips on your 2015 Mazda CX-5. The way you can tell is if there is a small removable tab on those rails that cover the holes. I went ahead and attached a video of a 2015 Mazda CX-5 with fixed mounting points to give you perspective about what to look for.
If you determine that you have fixed mounting points, I recommend the following setup:
- Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 46" #... view full answer...
There is a roof rack that will fit your 2016 Fiat 500X that has the panoramic sunroof, the Inno Aero. This rack is made up of Aero Crossbars # INXB100-108, Flush Feet for Aero Crossbars # INXS200, and Custom Fit Kit # INK482. This rack has a 100 lbs weight capacity though I do recommend checking your Fiat's manual to confirm what the actual capacity is. The aero crossbars are going to give you a quiet ride and they also have integrated T-slots so you can carry accessories that way.
I've... view full answer...
As long as you have a 2 inch receiver on your 2016 Ford F-150, I recommend the Rhino-Rack # RTL002. This is one of our better options for kayak carriers and installs directly into your hitch.
In addition to this carrier I recommend using a roof rack to secure your kayak to the roof of your truck instead of the foam blocks. If you have the SuperCrew Cab, the Rhino Rack Aero Bar Roof Rack kit is a great option. This include the Crossbars # RRVA150S-2, the Legs # RRRLKVA, and the Fit Kit... view full answer...
There are two roof configurations for a 2020 Kia Telluride, bare roof and flush side rails. The roof rack system for a bare roof attaches to the door jambs via car clips whereas the system for flush side rails attaches to the flush side rails.
I recommend the Yakima JetStream Crossbar System part # Y00426, part # Y28TR, part # Y06125, and part # Y06165 if you have a bare roof.
The Yakima Crossbar system is best because it has a custom fit for the best overall look, aero crossbars for... view full answer...
Yes, you will be able to fit the Thule Force XT L # TH6357B on your 2020 BMW X5's roof. Not only do you have enough roof for the required crossbar spread of 23-5/8 - 33 inches, you will also be able to mount the box to your roof and fully open your rear hatch. If you are wanting to go bigger, the Thule Force XT XL # TH6358B and XXL # TH6359B will fit as well.
As far as mounting, you will need a crossbar system in order to secure the Force XT XXL to your roof. The setup you need depends... view full answer...
There is one roof rack that is a confirmed fit for your 2012 Toyota Venza with a panoramic sunroof, though the sunroof should not be opened with the rack on. There isn't a roof rack available for your Venza that is going to allow normal use of the sunroof when the rack is on, but you can remove the rack if you like when you aren't using it in order to utilize the sunroof.
The roof rack that fits your '12 Venza with a panoramic roof is an exceptionally nice one from Yakima, and consists... view full answer...
In order to determine the compatibility of either the Thule Motion XT XL # TH629806 or the Thule Motion XT XXL # TH629906, it truly depends on if you have a bare roof, raised rails, or a factory roof rack currently installed. The reason why this matters is because not only do crossbars come with different heights and widths, but your roof has different available length based on what roof setup you have. The roof setup is important in determining if you can fully open the rear hatch of your... view full answer...
Hi Hamza,
Honda Civic models with a center exhaust unfortunately prevent the installation of a trailer hitch so the only way to haul your bike(s) would be to use a trunk mounted bike rack or roof rack mounted bike rack. If you'd prefer a trunk mounted bike rack then I recommend the Yakima FullBack 2 Bike Rack # Y02634. If you want to go with a roof rack mounted back rack and don't currently have a roof rack then you'll need the following components:
Yakima JetStream Crossbars # Y00425
BaseLine... view full answer...
I confirmed with Yakima that mounting points that are on your bare roof of your 2020 Toyota Highlander will fit a roof rack system. After you pop off the tab that covers the mounting points, there is a screw that you will use to attach a roof rack system. I went ahead and attached a video that shows how you would attach a Yakima roof rack system on the 2020 Toyota Highlander. For the parts you need for that setup, you will need the following parts:
- Yakima JetStream Crossbars - Aluminum... view full answer...
Thule offers a square bar roof rack that fits your 2020 Ram 1500 quad cab with the part # TH712500, # TH710501, and # TH145199.
Then for a square bar roof rack the Thule Portage part # TH819 would work great. view full answer...
For your 2016 Toyota Prius V you will need to install a roof rack to carry the boards you mentioned. Unfortunately only Yakima makes roof racks for your vehicle and they aren't exactly super cheap. So for that you would want the Yakima CoreBar part numbers # Y00425, # Y28TR, # Y06117, # Y06174. Which with that you'd be able to use the LockRack kpart # LR59FR that you referenced. This will attach to the crossbar by the top channel. view full answer...
Hello Lori, thanks for reaching out. You may be able to re use certain components from your old Yakima roof rack, but I would need to know specifically what parts you have in order to say for sure.
If you have the Yakima BaseLine towers like part # Y28TR, those could be used on the 2025 F350, you would just need a new fit kit # Y06185.
You might be able to re use you crossbars but again it depends what you have. Yakima recommends a 58" or 60" crossbar for the 2025 F350.
If you can tell... view full answer...
The Reese Q-Slot Platform-Style 2 Bike Rack is a fit for your 2015 Prius but has been discontinued. If you already have the rack it will work very well for you. I recommend using the included pin and clip for a secure fit in the hitch and then using a cable lock like # e98891 to secure your bikes to the rack.
The 2 inch receiver only Reese Q-Slot Platform-Style 2 Bike and 4 Bike Rack PS63138 (also discontinued) was a 2 or 4 bike carrier, but would NOT work on your 2015 Toyota Prius... view full answer...
The best option to transport a bike with your 2016 Lexus GSF is going to be to install a roof rack and attach a bike rack. The trunk mounted ones like item # SA805BL have mixed results and won't work with cars with spoilers. It doesn't look like your Lexus has any rails so to add a roof rack you will need the following parts:
Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425
BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR
BaseClip... view full answer...
Hi Tom! I just got to this one so I'm guessing you're going with the Thule Hullavator Pro # TH898 for your setup. I don't have the exact measurement for the 60" bars but it looks like it is too close to call. It will be 4-8" on the top. The 70" bar setup would be best, and it won't be too wide for your truck. Once again you will need the following:
-BaseLine Towers for Yakima Crossbars # Y28TR
-BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06185
-Yakima JetStream Crossbars... view full answer...
Hello Zeke,
So we can get your 2017 Honda CR-V set up to mount Yakima JetStream Crossbars # Y00425, though there aren't actually different options for this. Reason for that is you can't mix and match different manufacturers parts because they won't fit together. That means to put the JetStream crossbars on the bare roof of your 2017 Honda CR-V you would have to use the following parts:
- BaseLine Towers for Yakima Crossbars - Naked Roofs # Y28TR
- BaseClip Fit Kit # Y06188
- BaseClip... view full answer...
Hey Andy! The 50" crossbars on the Yakima BaseLine Roof Rack Kit item # Y88UB can be swapped out but the next largest size is the 60" Long item # Y00429 so I do not think that's going to be a viable option. By law the crossbars are not supposed to stick out past the rear view mirrors. If you want to pursue this option you'll need the following parts:
BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item... view full answer...
For your 2015 Ford F-150 SuperCrew Cab, I recommend the Rhino Rack Roof Rack consisting of:
Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 59" Long - Qty 2, # RRVA150B-2
Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars - Qty 4 # RRRLKVA
Custom DK Fit Kit for Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof # DK427
The custom fit kit is designed to specifically fit your vehicle curves and prevent marring and scratches as you mentioned. This kit is rated to carry 165 lbs.... view full answer...
The Yakima roof rack you referenced part numbers # Y00408, # Y28TR, # Y03536, and # Y06148 is a confirmed fit for your 2017 Honda Accord sedan and would be an excellent option for carrying a roof cargo box. Then for a cargo box the Thule Force part # TH6357B would fit this rack and work great. I attached a review video for this box installed on a similar sized vehicle as your Accord sedan.
I really like the Thule roof racks and cargo baskets as they are very well made, easy to use, and... view full answer...
The best route is to mount your 2 adult bikes to a trunk bike rack and mount the 3 children's bikes onto the roof of your 2019 Ford Fiesta hatchback. For the trunk rack, I recommend going with the Saris Bones 2 # SA805BL. The Bones 2 comes with a 35 pound per-bike weight capacity and has anti-sway cradles to eliminate movement during transport. It is important to note that if you have women's-style frames or step-thru adult frames, you need to use a bike frame adapter bar # 64005 for those... view full answer...
The best solution for you if you already have the Loadwarrior is to purchase the extension # Y07074. If you haven't already settled on a roof rack then I would instead recommend the MegaWarrior # Y07080. This will save you a little bit of money compared to the LoadWarrior plus extension # Y07070-74 and fit your roof rack crossbar spread of 33 inches great.
I cannot recommend you move the placement of your Yakima Q clips for two reasons. The clamps will not fit properly on the roof and... view full answer...
Yes! Out of the variety of fairings that we have to offer I recommend the 40" long Inno Fairing # INA261 because it will fit perfectly with the 38" long Rola Sport Series Roof Rack # 59757 for your 2009 Honda Accord.
If you let me know what you are wanting to use the roof rack for I can make additional recommendations for you. I have also attached an installation video and a picture of this roof rack on a 2009 Accord Sedan that you can reference. view full answer...
The Thule Hullavator Pro # TH898 can fit round bars by grabbing around the crossbar and can fit aero shaped bars if the bars have a channel on top of them. Which the Yakima aero shaped bars don't have top channels so to go the Yakima route will require round bars which includes the part numbers # Y00408, # Y53TR, # Y03536, and # Y00241 and you'd be set. view full answer...
The factory roof rack on the 2016 Subaru Outback Wagon has minimal options to fit the factory roof rack which is different than the factory side rails or flush mounted rails. You can use the Landing Pad 15 for Yakima Control Towers - Qty 4 # Y00241 which will allow you to simply remove your factory crossbars and mount these pads in their place. Then you can use the SkyLine Towers for Yakima Crossbars # Y53TR and round bar adapter # Y03536 if you want to use round bars like the 48 inch... view full answer...
There are towers available that will allow you to install your Yakima RoundBars on your 2024 CR-V Hybrid. You will need the following:
-SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 # Y64AR
-RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4 # Y03536
-SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers # Y44UR
If you have Yakima Same Key System locks you can transfer them over or you can add new locks using... view full answer...
Your best option is to use the Thule Compass Watersport Carrier # TH890000. The Compass is compatible with round, square, aero, elliptical, and most factory crossbars, including the ones on your 2019 Honda Passport.
It can easily accommodate your two canoes, as long as their combined weight is not over 130 lbs, and they are not more than 36 inches wide (at their widest point). The Compass will allow you to carry your two canoes in a vertical (post-style) position so you have one on each... view full answer...
Yes, you will be able to fit the Thule Force XT L # TH6357B on your 2020 BMW X5's roof. Not only do you have enough roof for the required crossbar spread of 23-5/8 - 33 inches, you will also be able to mount the box to your roof and fully open your rear hatch. If you are wanting to go bigger, the Thule Force XT XL # TH6358B and XXL # TH6359B will fit as well.
As far as mounting, you will need a crossbar system in order to secure the Force XT XXL to your roof. The setup you need depends... view full answer...
The landing pad you would need is part # Y00221 which will fit your roof rack channels. For towers you need two of the part # Y00152 and a round bar adapter part # Y03536.
For 58 inch crossbars you would want part # Y00409.
For 78 inch long you'd want the part # Y00411. view full answer...
The Curt hitch part # C99FR is a really great option for a trailer hitch for a bike rack and would be what I would recommend as the best. It's mostly hidden and has great towing capacities plus is made in the USA.
The best bike rack for you will be the best one that fits your needs. Most people prefer the platform style bike racks as they are the easiest to load and carry the bikes in the most stable way. So one of my favorites is the Thule EasyFold XT part # TH903202 which is lighter... view full answer...
Yes the Malone SteelTop roof rack part number # MPG203 would fit and work great on the roof of your 2019 Toyota 4Runner with raised rails. view full answer...
Hey Jim, the best alternative to the mounting hardware you have now would be the current Yakima roof rack components that they list for installing the round bars on your 2015 Toyota Sienna which is their Timberline kit that consists of part numbers # Y33TR and # Y03536. How do you like the longer crossbars? view full answer...
The Yakima roof rack you referenced part numbers # Y00408, # Y28TR, # Y03536, and # Y06148 is a confirmed fit for your 2017 Honda Accord sedan and would be an excellent option for carrying a roof cargo box. Then for a cargo box the Thule Force part # TH6357B would fit this rack and work great. I attached a review video for this box installed on a similar sized vehicle as your Accord sedan.
I really like the Thule roof racks and cargo baskets as they are very well made, easy to use, and... view full answer...
The Thule Hullavator, # TH898, will fit on a Yakima roof rack so if you like the spacing and looks of the Yakima racks you can certainly go that route for your 2018 Subaru Outback.
With the Hullavator the roof rack crossbars need to stick out past the mounting feet by at least 4 inches. What this means you will need to use longer bars than what would normally be recommended for the vehicle.
If you go with a round bar system then you will need the following parts:
Crossbars # Y00409
SkyLine... view full answer...
Rola roof rack R4000 actually mounts to side rails on vehicles so if your 2017 GMC Terrain has a naked roof then it will not work. The most cost effective option for models with a naked roof is from Yakima using the following parts:
Crossbars # Y00408
BaseLine Towers # Y28TR
RoundBar SL Adapter # Y03536
2 of BaseClip fit kit # Y06146 view full answer...
That's an older Yakima roof rack than we have replacement towers for. It looks like your buddy ruined the lock assemblies and there wouldn't be a way to replace the lock setup. What vehicle do you have? I can look into what the correct Yakima round bar rack is and see if there's a way to reuse at least the bars. view full answer...
Hi Joel!
You can indeed purchase the towers and fit kit without the bars from the Yakima SkyLine Roof Rack for Fixed Mounting Points - RoundBar Crossbars - Steel - Black - Qty 2 # Y93FB for your 2020 Subaru WRX. I have those two parts listed below:
SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems - Qty 4 # Y53TR
Landing Pad 22 for Yakima SkyLine and Control Towers - Qty 4 # Y00248
RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine,... view full answer...
While we do have a great Yakima crossbar system that is confirmed to fit your 2010 Hyundai Genesis Coupe, Rhino-Rack does not have a roof rack option that fits your vehicle.
With that being said, I saw that you were looking at the Yakima round crossbar system that includes the 58" Crossbars # Y00409. In order to have a complete setup with these crossbars that fit your roof, you also need the following parts:
- RoundBar End Caps # Y8007026
- BaseLine Towers # Y28TR
- RoundBar SL Adapters... view full answer...
Installing a track system roof rack like the Yakima parts # Y01126, # Y00221, # Y8890027, and # Y00410 won't void the warranty for your pickup but from what I could find it looks like modifying your A.R.E. topper will void that warranty. Since we aren't an A.R.E. dealer I can't really confirm this, but from my research it is very likely that your warranty will be void. So you can have the track system professionally installed but that would be your choice whether you want to pursue this... view full answer...
Hey John,
To mount Yakima RoundBars to your Telluride's flush rails you'll need the following components:
SightClip Fit Kit # Y34UR
SightLine Towers # Y64AR
RoundBar SL Adapter # Y03536
Yakima recommends their 48" RoundBar # Y00408 or 50" aero bar for the 2022 Kia Telluride so you'd have quite a bit of overhang if you go with 58" RoundBars # Y00409.
Flush rail towers are typically being screwed into fixed mounting points or clamping down into a slot so they actually are a bit more... view full answer...
For your 2007 Honda Accord you would simply select sedan for the 4 door version. The Yakima system for your vehicle will be the Baseline roof rack. The Q-Tower and Q-Clip fit kits were discontinued a few years back.
My recommendation for you consists of the following Yakima parts:
JetStream Crossbars - Aluminum - Black - 50" Long # Y00425
BaseLine Towers # Y28TR
BaseClip Fit Kit (front) # Y06159
BaseClip Fit Kit (rear) # Y06143
I also recommend adding locks # Y07204 view full answer...
There are a couple options for a cargo box setup on your 2018 Nissan Murano SL with a bare roof. As far as the box, I recommend the Yakima SkyBox 16 Roof Cargo Box - 16 cu ft # Y95AV or the Yakima SkyBox 21 Rooftop Cargo Box - 21 cu ft # Y07337. The great thing about the SkyBoxes is that they include the SuperLatch system that ensures the lid is latched closed and locked. With this mechanism, the key cannot be removed unless the lid is closed properly. In addition, the SkyBoxes include... view full answer...
47 inch long Thule aero bars would be too short to be used on your 2018 Toyota Tacoma. Thule recommends a 53 inch bar like the part # TH711400 with the feet part # TH710501 and the fit kit # TH145107. view full answer...
Hey Michael, it sounds like you have a set of round Yakima crossbars (among other things) that you'd like to reuse on your 2020 Toyota Highlander that has factory fixed mounting points. For that the complete rack with everything including the bars would normally be the part # Y63FB but since you have the bars already what you'd want is the part numbers # Y53TR, # Y46VR, and # Y03536 which is everything you'd need minus crossbars.
If you have a different setup currently let me know and... view full answer...
We carry many roof rack and kayak carrier options for your 2014 Ford Focus. The roof rack that I recommend is the Yakima Q Tower roof rack that includes two 58 inch crossbars, # Y00409, the BaseLine Towers # Y28TR, RoundBar Adapters # Y03536, and BaseClips # Y06135 and # Y06105. This will provide you with two crossbars to mount your kayak carrier to.
You can mount your kayak directly to the crossbars, but to prevent scratching your kayak, I recommend using kayak carriers like the Yakima... view full answer...
There is one roof rack that is a confirmed fit for your 2012 Toyota Venza with a panoramic sunroof, though the sunroof should not be opened with the rack on. There isn't a roof rack available for your Venza that is going to allow normal use of the sunroof when the rack is on, but you can remove the rack if you like when you aren't using it in order to utilize the sunroof.
The roof rack that fits your '12 Venza with a panoramic roof is an exceptionally nice one from Yakima, and consists... view full answer...
I do have a solution for you, however the Rhino-Rack roof rack that you referenced will not fit your 2013 Toyota Venza if it's equipped with the panoramic glass roof. None of the solutions from Rhino-Rack are compatible with the panoramic roof on your vehicle.
I checked with Yakima though and they do state that their JetStream Crossbar system is compatible with the glass roof and will work great on your Venza. This roof rack consists of # Y00426 for the two 60 inch JetStream Crossbars,... view full answer...
I checked with our rack manufacturers for you, and there is one roof rack option that will fit your 2013 Toyota Venza with the panoramic (or dual) sunroof, with the rack coming from Yakima; it is made up of the following parts:
- Yakima JetStream Crossbars - Black # Y00426
- BaseLine Towers for Yakima Crossbars # Y28TR
- BaseClip Fit Kit # Y06163
- BaseClip Fit Kit # Y06136
This is one of the best roof racks available, as the JetStream bars have what are called "WindRidges" built into... view full answer...
Yes! The Yakima Roof Rack system for Naked Roofs is confirmed to fit your panoramic roof on your 2011 Toyota Venza. This is a perfect fit for your vehicle. Although, it is important to note that you may not be able to open your sunroof, I recommend measuring the top-most part of your roof when opening to make sure before you attempt it. This Yakima Roof Rack is made of of the parts: # Y00426, # Y28TR, # Y06136, and # Y06163.
Check out the installation video on a different vehicle to... view full answer...
I do have an option for you but please keep in mind that the list of available roof racks for your 2009 Toyota Venza is very limited due to the panoramic roof construction. However, I checked with Yakima and they do offer a system for this vehicle which is the Yakima CoreBar System part # Y00422, part # Y28TR, part # Y06163, and part # Y06136. This system has aero shaped crossbars which means it will be less noisy and provide less drag than other crossbar types. The Yakima towers are also... view full answer...
I have a solution for you but there are no Thule systems that will work with your 2010 Toyota Venza and the panoramic roof. Instead you will want the roof rack by Yakima which includes the following parts:
Yakima JetStream Crossbars - Aluminum - Black - 60" Long - Qty 2 item # Y00426
BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06136
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers... view full answer...
I checked with Yakima who makes a roof rack that fits your 2019 Volkswagen Jetta and they state that with their rack installed there might be some interference with roof rack mounted accessories and the sunroof from opening which means that with just the crossbars installed you'd be able to open the roof.
For a roof rack you'd need the part # Y06163, # Y06136, # Y00425, and # Y28TR and you'd be set. view full answer...
The Yakima Jetstream roof rack part numbers # Y00425, # Y28TR, # Y06136, and # Y06148 is a confirmed fit for your 2006 Toyota Corolla and would be an excellent choice for a roof rack.
This rack has a weight capacity of 165 lbs so as long as the owners manual of your vehicle states that you have at least the weight capacity of your raft this would be an excellent option. view full answer...
I may have an option that will work for you, however, I do not recommend carrying the canoe on the bare roof of your 2008 Toyota Corolla. Most vehicles cannot handle more than 50 lbs directly on top of the roof.
Instead, I recommend adding a roof rack like the Yakima BaseLine Tower Roof Rack which consists of the following parts.
48 Inch Round Crossbars # Y00408
BaseLine Towers # Y28TR
RoundBar Adapter # Y03536
BaseClip Fit Kits # Y06136 and # Y06148
Yakima states that this roof rack... view full answer...
For your 2003 Toyota Corolla you will need a roof top cargo carrier that works with a crossbar spread of at least 32" of which I recommend the Malone Cargo16 Rooftop Cargo Box - 16 Cubic ft - Gray # MPG902 which will give you 16 cubic feet of storage for any gear or luggage you cannot fit in your vehicle.
If you do not have a roof rack already I recommend the Yakima Roof Rack System which uses 50" Yakima JetStream Crossbars # Y00425, BaseLine Towers for Yakima Crossbars # Y28TR, Fit Kit... view full answer...
I recommend going with the Yakima JetStream roof rack system for your 2006 Toyota Corolla because it will be long enough to accommodate the Thule Hullavator Pro Kayak Carrier # TH898, and you'll be able to use the same crossbars and leg kit for your 2021 Toyota Corolla.
50" JetStream Crossbars - Black # Y00425
BaseLine Towers - # Y28TR
Fit Kits - # Y06136 and # Y06148
Lock Core Kit - # Y07204 (optional)
Then once you get the 2021 Corolla you just need the Fit Kits # Y06135 and # Y06151.
Yakima... view full answer...
I recommend installing a Yakima JetStream roof rack on your 2016 Toyota Venza. This is partly due to all of the other roof racks having a "no-fit" note for the sunroof on your vehicle, but also because the Yakima roof racks are top-notch in quality and design. Here is what you need for your application:
60" JetStream Crossbars - Black # Y00426
BaseLine Towers - # Y28TR
BaseClips - # Y06136 AND # Y06163
Lock Core Kit - # Y07204 (optional)
If you let me know what you plan on using the roof... view full answer...
Yes, a roof rack for your 2007 Toyota Corolla sedan with a naked roof will allow you to use a cargo basket, including the Arksen basket you mentioned. You can go with the Yakima as well, and the parts needed that fit your '07 Corolla sedan with a naked roof are the following:
- Yakima JetStream Crossbars - Silver # Y00428 or Black # Y00425
- BaseLine Towers # Y28TR
- BaseClip Fit Kit # Y06148 & # Y06136 view full answer...
To use the Thule Hullavator item # TH898 on your 2011 Toyota Venza you're going to need to install a set of crossbars that extend 4" - 8" past the roof racks legs. This allows the lift assist function of the Hullavator to work.
Since your Venza does not have a roof rack and you have the glass roof there aren't many options. There is a roof rack that will work for you since you do not have the side rails. You will want the roof rack by Yakima and it includes the following parts:
Yakima... view full answer...
If you installed a heavier duty roof rack on your 2005 Toyota Corolla like the Yakima HD roof rack part numbers # Y01156, # Y00146, # Y03541, # Y06136, # Y06148 you could use a roof top tent like you mentioned. view full answer...
We do have a Yakima roof rack for your 2010 Scion tC, though Yakima hasn't used Q-clips for many years, and those parts have long been discontinued.
So to get a Yakima round bar roof rack on your 2010 Scion tC are the CrossBars # Y00408, Towers # Y28TR, RoundBar SL Adapter # Y03536, and BaseClips # Y06134 & # Y06136. view full answer...
The first thing you are going to need to put a kayak rack on your 2007 Toyota Corolla S would be a roof rack.
For a complete Yakima Roof Rack you are going to want the following parts.
Yakima JetStream Crossbars # Y00425
BaseLine Towers # Y28TR
BaseClip Fit Kit # Y06136
BaseClip Fit Kit # Y06148
Once you have the roof rack installed you would be ready to install the Yakima HandRoll Roof Rack Kayak Carrier # Y04082. In order to carry one kayak you will need to order a quantity of 2 of... view full answer...
The best option would be a cargo box installed on an aftermarket roof rack on your 2005 Scion tC. For a cargo box I would recommend the SportRack Vista XL Cargo Box part # SR7018.
For a more economical option you could go with a Rightline Sport Jr. Rooftop Cargo Bag # RL100S50, this bag does not require the installation of a roof rack. I also recommend a protective pad, # RL100650, to protect the roof when using the bag. This would be great if you only occasionally plan to carry cargo... view full answer...
Aside from the Yakima roof rack part # Y06163, # Y06136, # Y00425, and # Y28TR for your 2019 Volkswagen Jetta you'll also need carriers for the kayaks. I really like the Yakima JayLow part # Y04073 as it's easy to load, padded, and can fold down when not in use. This would give you a great way to carry both of your kayaks on your Jetta.
Then to lock it all you'd want the part # Y07206 which comes with enough cores for the roof rack and the carrier. view full answer...
The crossbar spread of the Yakima roof rack you have on your 2006 Scioin tC will be 21 inches that consists of part numbers # Y00425, # Y28TR, # Y06134, and # Y06136.
If you wanted to use the cargo bag part # RL100S50 that you referenced you would first need a cargo basket. For one confirmed to fit your crossbar spread you would want the Curt Cargo Basket part # C18115.
Check out the review video I attached for more info. view full answer...
There is one roof rack that is a confirmed fit for your 2012 Toyota Venza with a panoramic sunroof, though the sunroof should not be opened with the rack on. There isn't a roof rack available for your Venza that is going to allow normal use of the sunroof when the rack is on, but you can remove the rack if you like when you aren't using it in order to utilize the sunroof.
The roof rack that fits your '12 Venza with a panoramic roof is an exceptionally nice one from Yakima, and consists... view full answer...
I do have a solution for you, however the Rhino-Rack roof rack that you referenced will not fit your 2013 Toyota Venza if it's equipped with the panoramic glass roof. None of the solutions from Rhino-Rack are compatible with the panoramic roof on your vehicle.
I checked with Yakima though and they do state that their JetStream Crossbar system is compatible with the glass roof and will work great on your Venza. This roof rack consists of # Y00426 for the two 60 inch JetStream Crossbars,... view full answer...
I checked with our rack manufacturers for you, and there is one roof rack option that will fit your 2013 Toyota Venza with the panoramic (or dual) sunroof, with the rack coming from Yakima; it is made up of the following parts:
- Yakima JetStream Crossbars - Black # Y00426
- BaseLine Towers for Yakima Crossbars # Y28TR
- BaseClip Fit Kit # Y06163
- BaseClip Fit Kit # Y06136
This is one of the best roof racks available, as the JetStream bars have what are called "WindRidges" built into... view full answer...
Yes! The Yakima Roof Rack system for Naked Roofs is confirmed to fit your panoramic roof on your 2011 Toyota Venza. This is a perfect fit for your vehicle. Although, it is important to note that you may not be able to open your sunroof, I recommend measuring the top-most part of your roof when opening to make sure before you attempt it. This Yakima Roof Rack is made of of the parts: # Y00426, # Y28TR, # Y06136, and # Y06163.
Check out the installation video on a different vehicle to... view full answer...
I do have an option for you but please keep in mind that the list of available roof racks for your 2009 Toyota Venza is very limited due to the panoramic roof construction. However, I checked with Yakima and they do offer a system for this vehicle which is the Yakima CoreBar System part # Y00422, part # Y28TR, part # Y06163, and part # Y06136. This system has aero shaped crossbars which means it will be less noisy and provide less drag than other crossbar types. The Yakima towers are also... view full answer...
I have a solution for you but there are no Thule systems that will work with your 2010 Toyota Venza and the panoramic roof. Instead you will want the roof rack by Yakima which includes the following parts:
Yakima JetStream Crossbars - Aluminum - Black - 60" Long - Qty 2 item # Y00426
BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06136
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers... view full answer...
I checked with Yakima who makes a roof rack that fits your 2019 Volkswagen Jetta and they state that with their rack installed there might be some interference with roof rack mounted accessories and the sunroof from opening which means that with just the crossbars installed you'd be able to open the roof.
For a roof rack you'd need the part # Y06163, # Y06136, # Y00425, and # Y28TR and you'd be set. view full answer...
The Yakima Jetstream roof rack part numbers # Y00425, # Y28TR, # Y06136, and # Y06148 is a confirmed fit for your 2006 Toyota Corolla and would be an excellent choice for a roof rack.
This rack has a weight capacity of 165 lbs so as long as the owners manual of your vehicle states that you have at least the weight capacity of your raft this would be an excellent option. view full answer...
I may have an option that will work for you, however, I do not recommend carrying the canoe on the bare roof of your 2008 Toyota Corolla. Most vehicles cannot handle more than 50 lbs directly on top of the roof.
Instead, I recommend adding a roof rack like the Yakima BaseLine Tower Roof Rack which consists of the following parts.
48 Inch Round Crossbars # Y00408
BaseLine Towers # Y28TR
RoundBar Adapter # Y03536
BaseClip Fit Kits # Y06136 and # Y06148
Yakima states that this roof rack... view full answer...
For your 2003 Toyota Corolla you will need a roof top cargo carrier that works with a crossbar spread of at least 32" of which I recommend the Malone Cargo16 Rooftop Cargo Box - 16 Cubic ft - Gray # MPG902 which will give you 16 cubic feet of storage for any gear or luggage you cannot fit in your vehicle.
If you do not have a roof rack already I recommend the Yakima Roof Rack System which uses 50" Yakima JetStream Crossbars # Y00425, BaseLine Towers for Yakima Crossbars # Y28TR, Fit Kit... view full answer...
I recommend going with the Yakima JetStream roof rack system for your 2006 Toyota Corolla because it will be long enough to accommodate the Thule Hullavator Pro Kayak Carrier # TH898, and you'll be able to use the same crossbars and leg kit for your 2021 Toyota Corolla.
50" JetStream Crossbars - Black # Y00425
BaseLine Towers - # Y28TR
Fit Kits - # Y06136 and # Y06148
Lock Core Kit - # Y07204 (optional)
Then once you get the 2021 Corolla you just need the Fit Kits # Y06135 and # Y06151.
Yakima... view full answer...
I recommend installing a Yakima JetStream roof rack on your 2016 Toyota Venza. This is partly due to all of the other roof racks having a "no-fit" note for the sunroof on your vehicle, but also because the Yakima roof racks are top-notch in quality and design. Here is what you need for your application:
60" JetStream Crossbars - Black # Y00426
BaseLine Towers - # Y28TR
BaseClips - # Y06136 AND # Y06163
Lock Core Kit - # Y07204 (optional)
If you let me know what you plan on using the roof... view full answer...
Yes, a roof rack for your 2007 Toyota Corolla sedan with a naked roof will allow you to use a cargo basket, including the Arksen basket you mentioned. You can go with the Yakima as well, and the parts needed that fit your '07 Corolla sedan with a naked roof are the following:
- Yakima JetStream Crossbars - Silver # Y00428 or Black # Y00425
- BaseLine Towers # Y28TR
- BaseClip Fit Kit # Y06148 & # Y06136 view full answer...
To use the Thule Hullavator item # TH898 on your 2011 Toyota Venza you're going to need to install a set of crossbars that extend 4" - 8" past the roof racks legs. This allows the lift assist function of the Hullavator to work.
Since your Venza does not have a roof rack and you have the glass roof there aren't many options. There is a roof rack that will work for you since you do not have the side rails. You will want the roof rack by Yakima and it includes the following parts:
Yakima... view full answer...
If you installed a heavier duty roof rack on your 2005 Toyota Corolla like the Yakima HD roof rack part numbers # Y01156, # Y00146, # Y03541, # Y06136, # Y06148 you could use a roof top tent like you mentioned. view full answer...
We do have a Yakima roof rack for your 2010 Scion tC, though Yakima hasn't used Q-clips for many years, and those parts have long been discontinued.
So to get a Yakima round bar roof rack on your 2010 Scion tC are the CrossBars # Y00408, Towers # Y28TR, RoundBar SL Adapter # Y03536, and BaseClips # Y06134 & # Y06136. view full answer...
The first thing you are going to need to put a kayak rack on your 2007 Toyota Corolla S would be a roof rack.
For a complete Yakima Roof Rack you are going to want the following parts.
Yakima JetStream Crossbars # Y00425
BaseLine Towers # Y28TR
BaseClip Fit Kit # Y06136
BaseClip Fit Kit # Y06148
Once you have the roof rack installed you would be ready to install the Yakima HandRoll Roof Rack Kayak Carrier # Y04082. In order to carry one kayak you will need to order a quantity of 2 of... view full answer...
The best option would be a cargo box installed on an aftermarket roof rack on your 2005 Scion tC. For a cargo box I would recommend the SportRack Vista XL Cargo Box part # SR7018.
For a more economical option you could go with a Rightline Sport Jr. Rooftop Cargo Bag # RL100S50, this bag does not require the installation of a roof rack. I also recommend a protective pad, # RL100650, to protect the roof when using the bag. This would be great if you only occasionally plan to carry cargo... view full answer...
Aside from the Yakima roof rack part # Y06163, # Y06136, # Y00425, and # Y28TR for your 2019 Volkswagen Jetta you'll also need carriers for the kayaks. I really like the Yakima JayLow part # Y04073 as it's easy to load, padded, and can fold down when not in use. This would give you a great way to carry both of your kayaks on your Jetta.
Then to lock it all you'd want the part # Y07206 which comes with enough cores for the roof rack and the carrier. view full answer...
The crossbar spread of the Yakima roof rack you have on your 2006 Scioin tC will be 21 inches that consists of part numbers # Y00425, # Y28TR, # Y06134, and # Y06136.
If you wanted to use the cargo bag part # RL100S50 that you referenced you would first need a cargo basket. For one confirmed to fit your crossbar spread you would want the Curt Cargo Basket part # C18115.
Check out the review video I attached for more info. view full answer...
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Sally
6/30/2025
Perfect. It makes changing out to load my kayak super simple.