Yakima BaseLine Roof Rack for Naked Roofs - CoreBar Crossbars - Steel - Black - Qty 2

See what our Experts say about this Yakima Roof Rack

• Is Weight Capacity of Yakima CoreBar Crossbars Per Bar or for Pair
  The weight capacity of the Yakima CoreBar Crossbars like part # Y00421 is 220 lbs which is for loads evenly distributed across both bars. If you need a higher weight capacity, Yakima does off the HD Crossbars like part # Y01157 which have a 500 lb weight capacity. Please note, the feet and or vehicle roof may be rated lower and in which case you would abide by the lowest of the three components whether that be the crossbars, feet, or vehicle.
  view full answer...
• Can Rhino Rack Sportz Crossbars Be Cut Down If They Are Too Long?
  Hi Roger! I see you placed an order for the Rhino-Rack Aero Bar Roof Rack for Camper Shells - Track Mount - Black - 54" Bars # Y02-480B already, but I still wanted to get you an answer to your question. While some crossbars can be cut down to size, the ones included with the # Y02-480B cannot. The bottom of the bars have a short track in them for the towers to mount in, but they do not go all the way across the bar (see included image). Cutting the bar down can and will shorten that space...
  view full answer...
• Recommendation on a 1 or 2 Kayak Carrier for a 2010 Subaru Forester
  If you looking for a kayak carrier that will work with factory, Aero, round, or square crossbar roof racks, then I recommend the Thule Stacker # TH830. The Stacker carrier can carry 1-2 kayaks at a time. The Stacker includes hardware and tie-down straps to help secure your kayaks to your roof rake and vehicle. It carrier can be mounted on a vehicle with a minimum crossbar spread of 24 inches. I you are looking for a carrier that will carry up to 2 kayaks and can be loaded easier form the...
  view full answer...
• Weight Capacity and Bike Rack Options For 2018 Nissan Rogue
  In that question, the customer may have been referring to the towing capacity of their vehicle being a maximum tongue weight of 110lbs. That information can be found in your owners manual. So even if Draw-Tite Max-Frame Trailer Hitch Receiver # 75902 has a 3,500 pound towing capacity and 350 pound tongue weight capacity, the towing capacity of the vehicle takes precedent. So the lowest of the two numbers is what you go with in regards to towing capacity. So please check the towing capacity...
  view full answer...
• Does Rola Roof Rack R4000 Fit a 2017 GMC Terrain with Naked Roof
  Rola roof rack R4000 actually mounts to side rails on vehicles so if your 2017 GMC Terrain has a naked roof then it will not work. The most cost effective option for models with a naked roof is from Yakima using the following parts: Crossbars # Y00408 BaseLine Towers # Y28TR RoundBar SL Adapter # Y03536 2 of BaseClip fit kit # Y06146
  view full answer...
• Does Thule DockGrip Kayak Rack Fit 2018 Subaru Outback Limited Factory Crossbars
  Yes, I checked with Thule and for the factory crossbars of your 2018 Subaru Outback Wagon the DockGrip part # TH895 is a confirmed fit and will work well.
  view full answer...
• What is Advantage of Top Channel on Yakima JetStream Bar over Core Bar
  The top channel on the JetStream bars have the advantage of offering an easier/cleaner way to attach roof rack accessories. A lot of roof rack accessories are now being made to attach to a channel on the top of the bar. The CoreBars are a less expensive and still a really great bar but it comes down to what type of attachment you prefer. If you let me know what vehicle you have I can help get all of the parts together to install either style of rack on your vehicle.
  view full answer...
• Roof Rack and Kayak Load Assist Recommendation for 2011 Chevy Equinox with Raised Side Rails
  There is a solution for you, but the issue with the BoatLoader EVO the crossbar spread as well as its 80 lb weight capacity, which is less than your 87 lb fishing kayak. Instead, for your 2011 Chevy Equinox with raised side rails I recommend the Rhino-Rack Roof Rack, which will give your Equinox a very functional, durable rack that will allow you to use a load assist. This roof rack uses aero bars and consists of: - Rhino-Rack Vortex Aero Crossbars # RRVA126B-2 - Rhino-Rack SX Series...
  view full answer...
  
• Yakima Baseline or Skyline Roof Rack Recommendation for 2016 Mazda CX-5 for Fixed Point Roof
  The difference between the Yakima Baseline towers and Skyline towers is the style of roof they are intended which in your case indicates how it would install. The Baseline kits are designed for naked roof and will use the door clamps. The Skyline kits are designed for use on vehicles with factory fixed mounting points. Since this is the route you mentioned preferring on your 2016 Mazda CX-5 it would be your best option. That means you'll want the Yakima Skyline Aero Bar kit part numbers...
  view full answer...
• Which Rook Rack Would be the Most Quiet on My 2024 Lexus LX600 F Sport?
  Hello David, Congrats on the new Lexus, I really like the new grill designs I have been seeing on the SUV's. I understand your concern with the noise as some systems can be quite noisy. When it comes the the rail systems you definitely get what you pay for. I am showing that the 2024 Lexus LX 600 comes with the flush mounted rails (please refer to the image that I attached) so you will want the Thule WingBar Evo Roof Rack for Flush Rails - Aluminum - Black - Qty 2 # TH49GA (for silver...
  view full answer...
• Highest Capacity Roof Rack for a 2018 Subaru Outback Touring
  The Thule roof racks available for the 2018 Subaru Outback have a capacity of 110 pounds no matter which bar style is being used. There are roof racks that are rated higher though so to maximize the capacity of the vehicle (which according to the owner's manual is 176 pounds on models that have factory side rails that run front to back or 150 pounds for models with crossbars integrated into the rails). All of the Yakima roof rack options are rated for 165 pounds. For a Yakima roof rack...
  view full answer...
• Can I Use Yakima CoreBars On A 2024 Hyundai Tucson With Flush Rails?
  Hello Mike. According to Yakima, the SightLine Towers are the only option for the 2024 Hyundai Tucson. You can use the Corebars, and a 50" bar is recommended for the 2024 Tucson. You will also need the SightClip 25 # Y27AR and a set of SightLine Towers # Y64AR. We do have some videos showing installation of the SightLine roof rack. I have provided links to a couple different videos for you below.
  view full answer...
• Can I Convert a Hullavator 897XT to Work w/ Yakima CoreBar Crossbars?
  I am sorry the older Hullavator 897XT you own can not be converted to mount on Yakima CoreBar Crossbars like item # Y00421 because there is no t-slot. I confirmed this information with Thule. The only solution I have for you is to upgrade to the new Hullavator item # TH898 you were looking at.
  view full answer...
• Roof Rack Recommendation for 2018 Toyota Camry Hybrid with Sun Roof
  For your 2018 Toyota Camry Yakima has the CoreBar roof rack with aero shaped crossbars part numbers # Y00421, # Y28TR, and # Y06192 that can be used on vehicles with sun roofs. But Yakima states to keep it closed when the rack is installed. For a carrier to carry your two kayaks we have the Thule Stacker part # TH830 then that would work well. This rack will hold the kayaks on end. See install video I attached.
  view full answer...
• Will the Gutter Mounts # RL150S13-3 Attach to a Rhino-Rack Pioneer Platform?
  I went ahead and reached out to my contact at Rhino-Rack, and she confirmed that the Rhino-Rack Roof Rack Legs - Gutter Mount - 5-15/16" Tall # RL150S13-3 will technically attach to a Rhino-Rack Pioneer platform. However, Pioneer Platforms are customized to fit certain roof dimensions, and I cannot recommend which platform you will need for your vehicle. In order to give you the proper fitment and recommendation, please feel free to respond to this answer with the year/make/model/roof...
  view full answer...
• Recommended Yakima Round Bars for a 2025 Toyota RAV4 W/ Factory Flush Rails
  Hey A, for your 2025 Toyota RAV4 with factory flush rails you can use the Yakima SkyLine Roof Rack for Fixed Mounting Points # Y55FB which includes the Yakina round bars, the towers, and the round bar adapter. These towers will attach directly to your flush rails on your RAV4, so you won't need anything else to get it to work. Let me know if there is anything else I can do for you!
  view full answer...
• Bike Rack Recommendation for a 2017 Honda Civic
  Hello Tonya - Thanks so much for letting me know that your 2017 Honda Civic is a 4-door sedan. Once I know if you have a center exhaust on your vehicle, I can go ahead and recommend some great 2-bike racks for you!
  view full answer...
• Loadstop Compatibility With Yakima CoreBar And Universal Mighty Mounts
  Since the Yakima CoreBar # Y00421 does not have a t-slot to accept the standard load stops like # 753-3761, and due to its shape the LoadStop Brackets for Yakima Round Crossbars # Y05000 won't work either, leaving you with no compatible option. In order to use the load stops # Y05000 with your MightyMounts # Y03590, you'd need a different set of crossbars # Y00408 with the adapter # Y03536. I know it's not ideal, but due to the uniqueness of your crossbars that is your best option.
  view full answer...
• Is Thule Hullavator Kayak Carrier Compatible with Yakima CoreBar Crossbars
  The Thule Hullavator Pro Kayak Carrier # TH898 is only compatible with the Yakima CoreBar crossbars if you also use the mounting kit # TH7520970001. Just be sure that you have the proper clearance (4" - 8" beyond the feet) for this to work correctly and avoid contacting your vehicle. I have attached a photo showing how to make sure your CoreBar is long enough. If you happen to need longer CoreBar crossbars we have them available here: 50" - # Y00421 60" - # Y00422 70" - # Y00423 80" - # Y00424
  view full answer...
  
• Parts Needed to Mount Yakima Space Cadet Cargo Box on Roof of 2008 Honda Odyssey
  In order to mount your Yakima Space Cadet Cargo Box to the roof of your 2008 Honda Odyssey you will indeed need to add crossbars. For your Odyssey that features the factory raised side rails I recommend the Yakima CoreBar System. This roof rack consists of # Y00421 for the two 50 inch CoreBar Crossbars and # Y33TR for the TimberLIne Towers that will attach to the side rails. I have attached a short video demonstration on this roof rack that you can check out. As long as you still have...
  view full answer...
• Can Yakima CoreBar Crossbars Be Cut To Desired Length
  The Timberline is actually the towers # Y33TR, so you will either have the CoreBar crossbars # Y00421 or the JetStream # Y00426. You can trim these bars to a shorter length and I do recommend using a new hack saw blade to do so. The aluminum crossbar will cut easily so you will want to make sure you have a very straight cut and take it slow or you would easily mar your bars. Make sure you double check your fit before making any cuts.
  view full answer...
• Difference Between Yakima CoreBar and JetStream Roof Rack Crossbars
  There are a couple of differences between the two. The JetStream bars like # Y00425 are made of extruded aluminum while the CoreBars such as the # Y00421 you've looked at are constructed of galvanized steel. As you've mentioned, the CoreBar has a higher capacity. The primary difference is that the JetStream bars feature the T-Slot channel at the top that allows quick and easy accessory installation, while accessories used with the CoreBars would need to clamp around the crossbar. The...
  view full answer...
• What Crossbars Do I Need for a Thule Motion XT XL on My 2017 Lexus GX 460?
  In order to mount the Thule Motion XT XL # TH629806 on the factory flush rails of your 2017 Lexus GX 460, I recommend the Yakima CoreBar Crossbars - Steel - Black - 50" # Y00421. One of the great features of the CoreBars is that it combines the strength of steel with an aerodynamic shape to create a heavy-duty yet quiet roof rack for your vehicle. The Thule Motion XT XL will be able to clamp onto the CoreBars. For a complete roof rack system for your 2017 Lexus GX 460, I recommend these...
  view full answer...
• Adapter Needed to Use Older Yakima PowderHound on New Yakima CoreBars
  I have a solution for you, but the Replacement Mounting Hardware for Yakima PowderHound # Y8860040 will not work with your 3044 Yakima ski rack; I confirmed this with my contact at Yakima. The Universal MightyMounts # Y03590 is exactly what you need to adapt your first generation PowderHound ski rack (for round bars) to fit the Yakima CoreBars, like # Y00421 on your vehicle. I've attached the installation instructions for you to check out at the bottom of the page.
  view full answer...
• Recommended Fairing for Rola Roof rack on a 2009 Honda Accord Sedan
  Yes! Out of the variety of fairings that we have to offer I recommend the 40" long Inno Fairing # INA261 because it will fit perfectly with the 38" long Rola Sport Series Roof Rack # 59757 for your 2009 Honda Accord. If you let me know what you are wanting to use the roof rack for I can make additional recommendations for you. I have also attached an installation video and a picture of this roof rack on a 2009 Accord Sedan that you can reference.
  view full answer...
  
• Roof Rack and Ski Carrier to Fit 2019 Hyundai Santa Fe with Naked Roof
  Yakima has a really great roof rack for your 2019 Hyundai Santa Fe with a naked roof with the Baseline JetStream bar rack part numbers # Y28TR, # Y06151, # Y06154, and # Y00425 (see attached picture). This will give you an extremely high quality roof rack that has aero bars which will give you minimal wind noise. Then for a ski rack we have the FatCat EVO part # Y03096 which will hold 6 skis or part # Y03095 for up to 4. I attached a review video for this carrier for you to check out as well.
  view full answer...
  
• Kayak Rack and Load Assist for a 2018 Toyota Prius Prime Without Glass Roof
  Hey, Nick! Happy to help out. The best and easiest kayak rack to use with a load assist is the Thule Hullavator Pro # TH898. One big advantage is that everything is built into the carrier itself, here are no extra parts to remove or store. Personally, I’m not a fan of other load-assist options like the Malone DownLoader # MPG114MD-351XL, since you have to store the Telos legs inside your vehicle while traveling. That’s especially inconvenient if you’re working with a smaller vehicle. I...
  view full answer...
• How Can I Tell if I have Fixed Mounting Points on My 2015 Mazda CX-5 for a Crossbar System?
  According to the specs I have, you may have fixed mounting points on those rubber strips on your 2015 Mazda CX-5. The way you can tell is if there is a small removable tab on those rails that cover the holes. I went ahead and attached a video of a 2015 Mazda CX-5 with fixed mounting points to give you perspective about what to look for. If you determine that you have fixed mounting points, I recommend the following setup: - Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 46" #...
  view full answer...
• Recommended Roof Rack for Fiat 500x With Panoramic Glass Sunroof
  There is a roof rack that will fit your 2016 Fiat 500X that has the panoramic sunroof, the Inno Aero. This rack is made up of Aero Crossbars # INXB100-108, Flush Feet for Aero Crossbars # INXS200, and Custom Fit Kit # INK482. This rack has a 100 lbs weight capacity though I do recommend checking your Fiat's manual to confirm what the actual capacity is. The aero crossbars are going to give you a quiet ride and they also have integrated T-slots so you can carry accessories that way. I've...
  view full answer...
  
• Best Roof Rack for 2020 Kia Telluride With Naked Roof and How Does It Attach
  There are two roof configurations for a 2020 Kia Telluride, bare roof and flush side rails. The roof rack system for a bare roof attaches to the door jambs via car clips whereas the system for flush side rails attaches to the flush side rails. I recommend the Yakima JetStream Crossbar System part # Y00426, part # Y28TR, part # Y06125, and part # Y06165 if you have a bare roof. The Yakima Crossbar system is best because it has a custom fit for the best overall look, aero crossbars for...
  view full answer...
• Roof Rack Fit on 2012 Toyota Venza With Panoramic Sunroof
  There is one roof rack that is a confirmed fit for your 2012 Toyota Venza with a panoramic sunroof, though the sunroof should not be opened with the rack on. There isn't a roof rack available for your Venza that is going to allow normal use of the sunroof when the rack is on, but you can remove the rack if you like when you aren't using it in order to utilize the sunroof. The roof rack that fits your '12 Venza with a panoramic roof is an exceptionally nice one from Yakima, and consists...
  view full answer...
• Will the Thule Force XT L Fit My 2020 BMW X5?
  Yes, you will be able to fit the Thule Force XT L # TH6357B on your 2020 BMW X5's roof. Not only do you have enough roof for the required crossbar spread of 23-5/8 - 33 inches, you will also be able to mount the box to your roof and fully open your rear hatch. If you are wanting to go bigger, the Thule Force XT XL # TH6358B and XXL # TH6359B will fit as well. As far as mounting, you will need a crossbar system in order to secure the Force XT XXL to your roof. The setup you need depends...
  view full answer...
• Square Bar Roof Rack that Fits 2020 Ram 1500 Quad Cab
  Thule offers a square bar roof rack that fits your 2020 Ram 1500 quad cab with the part # TH712500, # TH710501, and # TH145199. Then for a square bar roof rack the Thule Portage part # TH819 would work great.
  view full answer...
• Will a Yakima Roof Rack System Fit My 2020 Toyota Highlander LE?
  I confirmed with Yakima that mounting points that are on your bare roof of your 2020 Toyota Highlander will fit a roof rack system. After you pop off the tab that covers the mounting points, there is a screw that you will use to attach a roof rack system. I went ahead and attached a video that shows how you would attach a Yakima roof rack system on the 2020 Toyota Highlander. For the parts you need for that setup, you will need the following parts: - Yakima JetStream Crossbars - Aluminum...
  view full answer...
• Is There A Trailer Hitch Available For A 2019 Honda Civic Sedan With A Center Exhaust
  Hi Hamza, Honda Civic models with a center exhaust unfortunately prevent the installation of a trailer hitch so the only way to haul your bike(s) would be to use a trunk mounted bike rack or roof rack mounted bike rack. If you'd prefer a trunk mounted bike rack then I recommend the Yakima FullBack 2 Bike Rack # Y02634. If you want to go with a roof rack mounted back rack and don't currently have a roof rack then you'll need the following components: Yakima JetStream Crossbars # Y00425 BaseLine...
  view full answer...
• Roof Rack and Board Carrier Recommendation for 2016 Toyota Prius V with Glass Roof
  For your 2016 Toyota Prius V you will need to install a roof rack to carry the boards you mentioned. Unfortunately only Yakima makes roof racks for your vehicle and they aren't exactly super cheap. So for that you would want the Yakima CoreBar part numbers # Y00425, # Y28TR, # Y06117, # Y06174. Which with that you'd be able to use the LockRack kpart # LR59FR that you referenced. This will attach to the crossbar by the top channel.
  view full answer...
• Compatibility of 3 Bike Rack on 2015 Toyota Prius
  The Reese Q-Slot Platform-Style 2 Bike Rack is a fit for your 2015 Prius but has been discontinued. If you already have the rack it will work very well for you. I recommend using the included pin and clip for a secure fit in the hitch and then using a cable lock like # e98891 to secure your bikes to the rack. The 2 inch receiver only Reese Q-Slot Platform-Style 2 Bike and 4 Bike Rack PS63138 (also discontinued) was a 2 or 4 bike carrier, but would NOT work on your 2015 Toyota Prius...
  view full answer...
• Recommended Roof Rack and Bike Rack for a 2016 Lexus GSF
  The best option to transport a bike with your 2016 Lexus GSF is going to be to install a roof rack and attach a bike rack. The trunk mounted ones like item # SA805BL have mixed results and won't work with cars with spoilers. It doesn't look like your Lexus has any rails so to add a roof rack you will need the following parts: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip...
  view full answer...
• Can Yakima Roof Rack From 2000 Ford F250 Be Used On A 2025 Ford F350?
  Hello Lori, thanks for reaching out. You may be able to re use certain components from your old Yakima roof rack, but I would need to know specifically what parts you have in order to say for sure. If you have the Yakima BaseLine towers like part # Y28TR, those could be used on the 2025 F350, you would just need a new fit kit # Y06185. You might be able to re use you crossbars but again it depends what you have. Yakima recommends a 58" or 60" crossbar for the 2025 F350. If you can tell...
  view full answer...
• What is Needed to Attach Yakima JetStream Crossbars to 2017 Honda CR-V With Bare Roof
  Hello Zeke, So we can get your 2017 Honda CR-V set up to mount Yakima JetStream Crossbars # Y00425, though there aren't actually different options for this. Reason for that is you can't mix and match different manufacturers parts because they won't fit together. That means to put the JetStream crossbars on the bare roof of your 2017 Honda CR-V you would have to use the following parts: - BaseLine Towers for Yakima Crossbars - Naked Roofs # Y28TR - BaseClip Fit Kit # Y06188 - BaseClip...
  view full answer...
• Which Size Crossbars for Thule Hullavator Pro on 2026 Ford F-350
  Hi Tom! I just got to this one so I'm guessing you're going with the Thule Hullavator Pro # TH898 for your setup. I don't have the exact measurement for the 60" bars but it looks like it is too close to call. It will be 4-8" on the top. The 70" bar setup would be best, and it won't be too wide for your truck. Once again you will need the following: -BaseLine Towers for Yakima Crossbars # Y28TR -BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06185 -Yakima JetStream Crossbars...
  view full answer...
• Recommended Roof Rack for a 2022 Honda Insight
  Hey Andy! The 50" crossbars on the Yakima BaseLine Roof Rack Kit item # Y88UB can be swapped out but the next largest size is the 60" Long item # Y00429 so I do not think that's going to be a viable option. By law the crossbars are not supposed to stick out past the rear view mirrors. If you want to pursue this option you'll need the following parts: BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item...
  view full answer...
• Roof Rack and Cargo Box Recommendation for 2017 Honda Accord Sedan
  The Yakima roof rack you referenced part numbers # Y00408, # Y28TR, # Y03536, and # Y06148 is a confirmed fit for your 2017 Honda Accord sedan and would be an excellent option for carrying a roof cargo box. Then for a cargo box the Thule Force part # TH6357B would fit this rack and work great. I attached a review video for this box installed on a similar sized vehicle as your Accord sedan. I really like the Thule roof racks and cargo baskets as they are very well made, easy to use, and...
  view full answer...
• Recommended Rhino Rack Roof Rack With Bike Rack And Surfboard Carrier For 2015 Ford F-150
  For your 2015 Ford F-150 SuperCrew Cab, I recommend the Rhino Rack Roof Rack consisting of: Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 59" Long - Qty 2, # RRVA150B-2 Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars - Qty 4 # RRRLKVA Custom DK Fit Kit for Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof # DK427 The custom fit kit is designed to specifically fit your vehicle curves and prevent marring and scratches as you mentioned. This kit is rated to carry 165 lbs....
  view full answer...
• Recommendation for Transporting 5 Bikes on a 2019 Ford Fiesta Hatchback
  The best route is to mount your 2 adult bikes to a trunk bike rack and mount the 3 children's bikes onto the roof of your 2019 Ford Fiesta hatchback. For the trunk rack, I recommend going with the Saris Bones 2 # SA805BL. The Bones 2 comes with a 35 pound per-bike weight capacity and has anti-sway cradles to eliminate movement during transport. It is important to note that if you have women's-style frames or step-thru adult frames, you need to use a bike frame adapter bar # 64005 for those...
  view full answer...
• Roof Rack Options that Fit 2012 Chrysler 300
  What install video are you referring to? Or what part number?
  view full answer...
• Recommended Spacing for Yakima Q7 Clip on 2015 Chevrolet 2500HD Double Cab with Yakima Cargo Basket
  The best solution for you if you already have the Loadwarrior is to purchase the extension # Y07074. If you haven't already settled on a roof rack then I would instead recommend the MegaWarrior # Y07080. This will save you a little bit of money compared to the LoadWarrior plus extension # Y07070-74 and fit your roof rack crossbar spread of 33 inches great. I cannot recommend you move the placement of your Yakima Q clips for two reasons. The clamps will not fit properly on the roof and...
  view full answer...
• Roof Rack Recommendation for 2013 GMC Terrain for Carrying Thule Hullavator
  For your 2013 GMC Terrain with a naked roof you would want a Yakima roof rack like the JetStream part # Y00425, # Y28TR, and # Y06146 and you'd easily be able to carry a Hullavator # TH898. The Hullavator needs a rack that over hangs past the feet a few inches and can install into the top channel of this rack for an easy and secure install.
  view full answer...
• Recommended Roof Rack and Bike Rack for a 2016 Lexus GSF
  The best option to transport a bike with your 2016 Lexus GSF is going to be to install a roof rack and attach a bike rack. The trunk mounted ones like item # SA805BL have mixed results and won't work with cars with spoilers. It doesn't look like your Lexus has any rails so to add a roof rack you will need the following parts: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip...
  view full answer...
• Roof Rack With Longer Crossbars For 2023 Kia Sorento With Naked Roof
  Hello Katherine, thanks for reaching out. Yes, we do have a product that will work for you! The best option for this will be to go with a Yakima JetStream roof rack. The design of their bars and towers allows for longer than standard crossbars, so we can set you up with something longer. For the Yakima bars, a 60" crossbar will be the closest option for something longer than 56". Here are the parts you will need for the complete roof rack system: - Yakima JetStream Crossbars - Aluminum...
  view full answer...
• Recommended Trailer Hitch Receiver for 2015 Lexus IS 250 for a Bike Rack and Light Trailer
  I recommend the Draw-Tite trailer hitch receiver, part # 24923, for your 2015 Lexus IS 250. It's confirmed to fit both the sedan or convertible models. The hitch is a Class I, 1-1/4 inch receiver so you need to make sure the bike rack you use fits the Class I. The bike rack I recommend is the very popular Thule T2 Pro XTR, part # TH23JV. The T2 is a platfrom rack that carries up to 2 bikes at 50 pounds each. it can be folded up out of the way when you're not using it as well as tilted...
  view full answer...
• Roof Rack Recommendation for 2015 Kia Sorento with Naked Roof for Thule Hullavator
  We can definitely help, but I need to know which specific model of Sorento you have and what type of roof do you have. Does it have rails you could put your hand under or are they flush rails? For your vehicle there are several configurations so it's hard to recommend what you'd need without more info.
  view full answer...
• Recommended Roof Rack for a 2023 Kia Sorento w/ a Naked Roof
  To attach a roof rack to your 2023 Kia Sorento, with no roof rails, you will want the roof rack by Yakima and it includes the following parts: Yakima HD Crossbars - Aluminum - Black - 55" Long - Qty 2 item # Y01156 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR HD Bar SL Adapter for Yakima BaseLine,Towers - Qty 4 item # Y03541 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06175 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers -...
  view full answer...
  
• Recommended Roof Rack for a 2013 Lexus ES 350 for Kayaks
  The Yakima JetStream Crossbar System composed of part # Y00425, part # Y28TR, part # Y06175, and part # Y06160 is a confirmed fit 2013 Lexus ES 350 and a great option for carrying kayaks. In order to secure both kayaks, you'd need a few sets of j-style carriers for which I recommend the etrailer Kayak Roof Rack part # e98878. These are complete carriers that come with everything you need to secure the kayaks like tie-downs. Please note, you should not open the sun roof with the roof rack...
  view full answer...
• Do the Yakima HD Bars Fit A 2015 Lexus ES 350 With A Glass Sunroof?
  I went ahead and spoke with Yakima and they said that you actually can use the Yakima HD Crossbars # Y01156 with the BaseLine Towers for Yakima Crossbars # Y28TR, the HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers # Y03541 and the fit kits # Y06175 & # Y06160 with your 2015 Lexus ES 350 that has a glass roof. We list this as a "non-fit" due to the fact that you could potentially damage your sunroof while this system is installed, but it'll physically fit...
  view full answer...
  
• Options to Transport Bikes on My 2022 Hyundai Ionic Plug-In Hybrid
  While we do have a bike rack option for you, we currently do not have any hitches that we well that can allow you to mount a rack for your plug-in Hybrid 2022 Hyundai Ioniq. This is because since your model is a new model, manufacturers have not engineered a model that fits the exact design of your vehicle quite yet. With that being said, I recommend using a trunk bike rack like the Yakima FullBack 2 # Y02634 or the FullBack 3 # Y02633. Not only does the FullBack include a 35-pound per...
  view full answer...
• Roof Rack Recommendation for a 2013 Lexus ES 350
  Thank you for all of the information. While Inno does make a great roof rack system, I checked with their fitguide to see if we had overlooked something but it doesn't look like they have something for your 2013 Lexus ES 350 so for your application I recommend using the Yakima JetStream system: 50" JetStream Crossbars - # Y00425 BaseLine Towers - # Y28TR Fit Kits - # Y06175 and # Y06160 Lock Core Kit - # Y07204 (optional) The clips used to clamp to your door jambs have a protective coating...
  view full answer...
• Correct Yakima Towers to Use with Existing Round Crossbars on 2019 Hyundai Kona with Bare Roof
  The correct Yakima towers to use on the bare roof of your 2019 Hyundai Kona are indeed the BaseLine Towers # Y28TR that you referenced. These are the only Yakima towers that will work on your particular vehicle. To use these with your existing round bars you will just need to add the RoundBar SL Adapter # Y03536. This kit includes all 4 of the needed adapters for each of the towers. In addition to the towers themselves you will also need the Front Fit Kit # Y06175 and the Rear Fit Kit...
  view full answer...
• Will the SportRack Semi-Custom Roof Rack Fit a 2018 Elantra GT Hatchback Bare Roof?
  I have a great solution for you. Unfortunately, the SportRack Semi-Custom Roof Rack for Naked Roofs # SR1002 will not fit your 2018 Hyundai Elantra GT. However, for a roof rack system that does fit for your Hyundai Elantra GT, I recommend the following parts: - Yakima CoreBar Crossbars - Steel - Black - 50" Long - Qty 2 # Y00421 - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06175 - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06159 This setup...
  view full answer...
• Recommended Roof Rack for 2019 Hyundai Kona without Side Rails
  I checked with Yakima and they do have a roof rack system available that is designed to fit your 2019 Hyundai Kona that has a completely naked roof without any side rails. For this you will just need part # Y00425 for the 50" JetStream Crossbars, # Y28TR for the BaseLine Towers that mount directly to the vehicle's bare roof, # Y06175 for the Front BaseClip Fit Kit, and # Y06131 for the Rear BaseClip Fit Kit. This will provide you with an excellent, durable, and quiet roof rack because...
  view full answer...
• Roof Rack Recommendation for 2020 Hyundai Kona With No Side Rails
  For your 2020 Hyundai Kona I do have a roof rack that's confirmed to fit. The Yakima Roof Rack, which is going to consist of Yakima JetStream Crossbars # Y00425 bars, the BaseLine Towers for Yakima Crossbars # Y28TR, BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06175 and BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06131. The Yakima JetStream bars are extremely quiet, because they have an aerodynamic design, they are 50" long so you'll have plenty of room to mount...
  view full answer...
• How to Carry a SUP on the Roof of a 2019 Hyundai Ioniq
  You can definitely use the SeaSucker Board Carrier # 298-BX1806 on your 2019 Hyundai Ioniq but this is actually a carrier in and of itself so it doesn't require a roof rack on your vehicle and you wouldn't be able to install your Thule SUP carrier to it. If you still want to stick with your Thule SUP carrier then I recommend the Yakima JetStream roof rack which consists of 50" JetStream Bars # Y00425 Black, the BaseLine Towers # Y28TR, and the Fit Clips # Y06175 and # Y06111. You can add...
  view full answer...
  
• Roof Rack For 2017 Lexus IS 300 For Ski & Snowboard Carrier
  To carry snowboards on your 2017 Lexus IS 300, you will need a roof rack, as there isn't a standalone carrier just for a '17 IS 300. This will work for the 4-door sedan models, so if that's what your 2017 Lexus IS 300 is, I recommend a roof rack from Yakima: - Yakima JetStream Crossbars # Y00425 - Towers # Y28TR - Fit Kit # Y06159 & # Y06175 This rack will allow you to put on a snowboard rack for your Lexus, and I recommend an option from Kuat: - 4 Pairs of Skis or 2 Boards: Kuat...
  view full answer...
• Roof Rack that Fits 2019 Kia Forte with Naked Roof
  Yakima has a roof rack that fits your 2019 Kia Forte with the Jetstream rack part # Y00426, # Y28TR and # Y06175 but the Rola rack you mentioned would not fit.
  view full answer...
• Recommended Roof Rack for a 2013 Hyundai Tucson Limited
  For a roof rack that is a confirmed fit for your 2013 Hyundai Tucson Limited I recommend the Yakima JetStream Crossbar System which is composed of part # Y00425, part # Y28TR, part # Y06175, and part # Y06178. This system attaches onto the door jambs of your Tucson Limited and are designed specifically to do so. As long as you have a bare roof then this system will work for you. It has aero crossbars for wind resistance and integrated t-slots for use with t-slot mounted accessories. If...
  view full answer...
• Correct BaseClips for Yakima Jetstream Bars on a 2023 Hyundai Tucson With a Naked Roof
  I checked with Yakima, and it looks like to install the Yakima BaseLine FX Roof Rack for Naked Roofs # Y63TR & # Y73TR on your 2023 Hyundai Tucson with a naked roof, you're going to need the BaseClips # Y06165 & # Y06175.
  view full answer...
• What Roof Rack do You Recommend for My 2020 Hyundai Kona Hybrid?
  I have the exact setup you need for your 2020 Hyundai Kona Hybrid with a bare roof. Since the only roof rack system we have is manufactured by Yakima, I confirmed with them that they do not differentiate between roof styles on electric models and regular models. With that being said, the same roof rack that is constructed for a 2020 Hundai Kona's bare roof fits both model types. For a great roof rack for your vehicle, I recommend the following parts: - Yakima JetStream Crossbars - Aluminum...
  view full answer...
• Yakima Roof Rack For 2021 Hyundai Kona With Bare Roof to Carry Kayak
  The correct Yakima roof rack for your 2021 Hyundai Kona with a bare roof is made up of the following parts: Naked Roof - Yakima JetStream Crossbars - Silver # Y00428 or Black # Y00425 - BaseLine Towers for Yakima Crossbars # Y33TR - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06175 - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06131 For added protection, I recommend considering adding locks to the rack with the Same Key System Lock Cores # Y07204. Once you have...
  view full answer...
• How to Carry 4 Bikes with a 2017 Hyundai Ioniq
  The hitches available for your 2017 Hyundai Ioniq are all Class I hitches like the Draw Tite part # 24963 which is a confirmed fit. Class I hitches can only carry up to 2 bikes at a time since they are for lower capacity vehicles. Any more than that and the weight and leverage of the additional bikes stresses the hitch/vehicle too much. The most popular bike rack we carry that has been confirmed to fit this vehicle is the Thule Camber 2 part # TH9058. We asked our demo and install guys...
  view full answer...
• What is the Best-for-the-Price Roof Rack and Ski Carrier for My 2021 Hyundai Kona?
  The best economical roof rack for your 2021 Hyundai Kona depends on whether your vehicle has a bare roof or flush factory rails. If your Kona has a bare roof, I recommend the following setup: - Round 48" CrossBars for Yakima Roof Rack System # Y00408 - BaseLine Towers for Yakima Crossbars - Naked Roofs # Y28TR - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06131 - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06175 - Yakima Same-Key Lock Cores #...
  view full answer...
• Recommendation for Carrying 4 Bikes on a 2009 BMW 535i
  There may be a way for you to carry 4 bikes on your 2009 BMW 535i, however, there are only class I trailer hitches available for your vehicle. Class I trailer hitches are limited to carrying a maximum of 2 bikes on a bike rack because of the reduced tongue weight of the vehicle and hitch. The reason that only two bikes are recommended, on a hitch mounted bike rack, for Class I hitches is that the added torque applied to the hitch and vehicle frame will be too great for the setup, and...
  view full answer...
• Can a Roof Rack be Installed on a 2015 Hyundai Tucson with a Panoramic Sun Roof
  It depends on which system you're referring to. It basically comes down to how the roof rack installs and what the manufacturer of the roof rack's recommendations are. For example, the Thule roof rack that that fits the 2015 Hyundai Tucson is not recommended to be installed on the vehicle at all if it has a panoramic sunroof. However, the Yakima that's for the Tucson that has a naked roof consisting of the Round CrossBars # Y00408, BaseLine Towers # Y28TR, Adapters # Y03536, and BaseClips...
  view full answer...
• Best Roof Rack for 2020 Kia Telluride With Naked Roof and How Does It Attach
  There are two roof configurations for a 2020 Kia Telluride, bare roof and flush side rails. The roof rack system for a bare roof attaches to the door jambs via car clips whereas the system for flush side rails attaches to the flush side rails. I recommend the Yakima JetStream Crossbar System part # Y00426, part # Y28TR, part # Y06125, and part # Y06165 if you have a bare roof. The Yakima Crossbar system is best because it has a custom fit for the best overall look, aero crossbars for...
  view full answer...
• Do 2020 Hyundai Palisade And Kia Telluride Use The Same Roof Rack Crossbars?
  Hello Terry, thanks for reaching out. It would be possible to use the same crossbars on a 2020 Hyundai Palisade and a 2020 Kia Telluride. The fit kits would be different, but it would be possible, for example, to use the 60" Yakima JetStream bars # Y00426 and BaseLine Towers # Y28TR on both vehicles. Here are the fit kits you would need for each one: 2020 Hyundai Palisade (without factory flush rails) - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06138 - BaseClip Fit...
  view full answer...
• Picking Between 50 and 60 inch Yakima Jetstream Roof Racks for 2021 Kia Telluride
  Going with a longer crossbar does give you more space to mount roof accessories and carriers but the longer bars do tend to get in the way a little more and create a little more wind noise. So really it comes down to considering how many things you plan to carry on the roof rack and how wide they might be. Now that said the 60 inch Jetstream rack Yakima offers part numbers # Y00426, # Y28TR, # Y06125, and # Y06165 is the correct rack for if you have a naked roof and the 50 inch rack part...
  view full answer...
• How to Determine Correct Roof Rack For 2024 Kia Telluride
  I'm going to go ahead and respectfully disagree that we're idiots, Paul. I'm confident we can figure out the combination for a roof rack on your 2024 Kia Telluride, and there are three possible options Kia has for your roof - flush-mounted rails, raised side rails, and a bare roof. I made some diagrams below showing test fits on a Kia Telluride with photos from the nice folks at Yakima so you can see the difference (please note these are just test fit photos, and not exactly how the rack...
  view full answer...
  
• 2022 Kia Telluride Roof Rack Recommendation for 2 Thule Hullavator Pro Kayak Carriers
  Yes, you can fit 2 of the Thule Hullavator Pro # TH898 on your 2022 Kia Telluride. They use up 28-1/2" of crossbar space and weight in at about 40 lbs each so we definitely want to keep that in mind as we look into roof rack solutions. I recommend going with a Yakima JetStream roof rack system because it's the only system where the bars will be long enough to accommodate 2 of the Hullavators (not to mention it is a nice roof rack system). The correct roof rack kit depends on if you have...
  view full answer...
• Recommended Roof Rack System For 2021 Kia Telluride LX with Naked Roof
  The only company at the moment (June 2023) that makes a roof rack system for your 2021 Kia Telluride LX with a naked roof is Yakima, so for a roof rack system you'll need the following components: Crossbars # Y00429 Feet # Y28TR Fit Kits # Y06125 and # Y06165 I'd also recommend adding the locks # Y07204 to secure the roof rack to your roof to deter theft. Out of all of the crossbar options for your vehicle this is by far the best due to the Aero design to cut down on wind noise the most,...
  view full answer...
• Recommended Roof Rack for 2020 Kia Telluride
  There are a lot of great options for roof racks for your 2020 Kia Telluride, but unfortunately, none of them meet the 220 lbs weight capacity you are looking for. 165 lbs is a common weight limit for roof rack systems. This is usually because of the limitations of the mounting system. Your vehicle roof and typically the actual crossbars themselves can be rated for 220 lbs but the mounting feet that attaches the bars to your roof might be rated for less, so this becomes the limit for the...
  view full answer...
• Recommended Roof Rack and Cargo Box for 2022 Kia Telluride
  For your 2022 Kia Telluride I recommend the Yakima CoreBar rack which includes part numbers # Y00422, # Y28TR, # Y06125, and # Y06165. This rack has an aerodynamic, teardrop shape to reduce noise and vibration and reduces drag to help maintain fuel efficiency. For a roof box, I recommend the Thule Motion XT Rooftop Cargo Box # TH629806. It has a carrying capacity of 18 cubic feet and can hold up to 165 lbs. Since the roof rack can hold 220 lbs, it will be able to handle the weight of any...
  view full answer...
• Recommended Roof Rack for Roof Top Tent on a 2022 Kia Telluride
  I have a couple of options for roof racks depending on whether or not your 2022 Kia Telluride has the flush mounted rails that run front to back. If your Kia has the flush mounted rails that run front to back you will want the 2022 Kia Telluride Roof Rack by Rhino Rack. The Roof Rack Includes: Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 54" Long - Qty 2 item # RRVA137B-2 Rhino-Rack SX Series Legs for Vortex Aero Crossbars - Flush Factory Side Rails - Qty 4 item # RR94DY If...
  view full answer...
• Will the 60-Inch WingBar Evo Crossbars Fit My 2022 Kia Telluride
  The reason why 60-inch WingBar Evo Crossbars # TH711520 are not rated to fit your 2022 Kia Telluride is because the WingBars have attachment slits on the bottom where it connects to the Evo Flush Rail Feet # TH710601 with the Fit Kit for Thule Evo Flush Roof Rack Feet - 186095 # TH77JV. If the crossbars are too long and your roof is too narrow, the slit where the feet connects to the crossbar will not extend far enough to connect, which is the case with the 60-Inch Wingbars. I went ahead...
  view full answer...
  
• Roof Rack and Thule Cargo Box Recommendation for 2021 Kia Telluride with Naked Roof
  For your 2021 Kia Telluride with a naked roof the best roof rack option is the Yakima JetStream rack part numbers # Y00426, # Y28TR, # Y06125, and # Y06165. This is the highest capacity roof rack that fits your vehicle, is the easiest to install, and has the quietest bar design. You could then carry a cargo box like the Thule Motion XT part # TH629707 which is similar in color to your vehicle and is very easy to use and well made.
  view full answer...
• Roof Rack Recommendation for a 2020 Kia Telluride with Factory Rails
  When Thule discontinued the old square bars, they unfortunately stopped manufacturing the compatible roof rack feet, so there won't be a Thule fit kit that would be compatible with the vehicle and your Telluride. At present, Yakima is the only manufacturer offering a roof rack fit for the 2020 Kia Telluride. The kit you'll need will depend on whether your vehicle has the side rails that run along the edge of the roof, front to back. For the raised side rails, you can assemble a rack using...
  view full answer...
• Roof Rack and Thule Cargo Box Recommended for 2022 Kia Telluride
  I'd recommend a Yakima JetStream roof rack. The rack provides aero-style crossbars which offer less wind resistance than round or square crossbars, and would be much more quiet. You can assemble the roof rack using these parts: • 60 Inch JetStream crossbars part # Y00426 or silver as part # Y00429 • Yakima BaseLine towers, part # Y28TR • Vehicle Specific fit clips, part # Y06125 and # Y06165 (different clips are used for the front and rear crossbar) A Thule cargo box would be compatible...
  view full answer...
• Crossbar Recommendation Options For A 2022 Kia Telluride
  For your 2022 Kia Telluride if your vehicle does not have factory roof rails, then I recommend taking a look at the: -Yakima JetStream Crossbars # Y00426, with the towers # Y28TR, and the fit kits # Y06125 & # Y06165. These cross bars measures 60" long, 3-1/8" wide, 1" tall, and has a maximum weight capacity of 165-lbs. Or, If your vehicle flush mounted rails, then I suggest taking a look at the: -Thule WingBar Evo Crossbars # TH711400, with the rail feet # TH710601, and the fit kit...
  view full answer...
• 60 Crossbar Roof Rack System For 2016 Honda Fit
  You could get these 60" long Yakima Corebar # Y00422 with the Baseline Towers # Y28TR and these two BaseClip Fit Kits # Y06156 and # Y06165. They may stick out a little farther than you expect, so watch your head when you get out of your 2016 Honda Fit!. I've included a video for you to watch to get an idea of how they install.
  view full answer...
• HD Yakima Roof Rack that Fits 2021 Kia Telluride
  The Yakima HD Roof Rack that fits your 2021 Kia Tulluride part numbers # Y01157, # Y28TR, # Y03541, # Y06125, # Y06165 gives you a 60 inch crossbar roof rack which would be enough to fit all of the roof top accessories you mentioned because of the length and the top channel. Some of that depends on the width of the cargo box but I don't believe it would be an issue. The Yakima SkyBox 16 part # Y07335 would work great and is 36 inches wide. The bars are a heavier duty option but are still...
  view full answer...
• Recommendation to Carry Skis and Snowboards on Roof of 2021 Kia Telluride
  To start off we will need to get a roof rack on your 2021 Kia Telluride for which I recommend the Yakima JetStream system which includes the following: 60" JetStream Crossbars - Black # Y00426 BaseLine Towers - # Y28TR Fit Kits - # Y06125 and # Y06165 Then for a ski/snowboard carrier I recommend going with 2 of the Rhino-Rack Ski and Snowboard Carrier # RR573. This can carry 3 pairs of skis or 2 boards so you would be able to use 1 for the skis and then 1 for the boards. I've attached...
  view full answer...
• Does Yakima Roof Rack Fit 2021 Kia Telluride With a Naked Roof
  I checked with the manufacturer for you and can confirm that the Yakima roof rack is absolutely a fit for your 2021 Kia Telluride with a bare roof. It will work and fit perfectly on your Telluride to allow you to carry whatever cargo you need. The rack is made up of the following parts: - Yakima JetStream Crossbars - # Y00426 - BaseLine Towers for Yakima Crossbars # Y28TR - BaseClip Fit Kit for Yakima BaseLine Roof Rack # Y06165 - BaseClip Fit Kit for Yakima BaseLine Roof Rack # Item...
  view full answer...
• What Roof Rack and Largest Thule Cargo Box Do You Recommend for My Bare-Roof 2022 Kia Telluride?
  For a great compatible roof rack system for your bare roof on your 2022 Kia Telluride, I recommend the following setup: - Yakima CoreBar Crossbars - Steel - Black - 60" Long - # Y00422 - BaseLine Towers for Yakima Crossbars - Naked Roofs # Y28TR - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06125 - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06165 - Yakima Same-Key Lock Cores # Y07204 Not only will the Yakima CoreBar system allow you to mount...
  view full answer...
• Correct BaseClips for Yakima Jetstream Bars on a 2023 Hyundai Tucson With a Naked Roof
  I checked with Yakima, and it looks like to install the Yakima BaseLine FX Roof Rack for Naked Roofs # Y63TR & # Y73TR on your 2023 Hyundai Tucson with a naked roof, you're going to need the BaseClips # Y06165 & # Y06175.
  view full answer...
• Recommended Roof Rack For A 2022 Kia Telluride With Naked Roof For Carrying A Thule Roof Box
  To carry the Thule Force XT XL Roof Box # TH6358B on the top of your 2022 Kia Telluride with the naked roof, you will indeed need a full system. Though we do not have a Thule roof rack system to match this roof box, we do have a Yakima set up that will fit perfectly. The Yakima JetStream Crossbars - Aluminum - Black - 60" Long # Y00426, which are the recommended size, will be the quietest ones currently on the market and will have no issues carrying the Thule roof box. To complete this...
  view full answer...
• Will the Thule Hullavator # TH898 Fit a 2022 Kia Telluride SX
  Yes, you will be able to use your Thule Hullavator Pro Kayak Carrier and Lift Assist with Tie-Downs - Side Loading # TH898 on your new 2022 Kia Telluride SX. You will need a roof rack like the kit: Thule WingBar Evo Crossbars - Aluminum - Black - 53" Long # TH711420 and Evo Flush Rail Feet for Thule Crossbars - Flush Side Rails # TH710601. If you have no rails you will need a kit like the Yakima JetStream Crossbars - Aluminum - Black - 60" Long - Qty 2 # Y00426, BaseLine Towers for Yakima...
  view full answer...
• Yakima Round Bar Roof Rack Recommendation for 2018 Honda Fit
  I have a roof rack solution I can provide for your 2018 Honda Fit, but since the Q Tower racks were discontinued by Yakima they never released a Q Tower fit kit for your vehicle. We do have a way for you to install and use your round bars though. For that you'd want the Yakima Baseline roof rack that consists of part numbers # Y00408, # Y28TR, # Y03536, # Y06156, and # Y06165. Since already have crossbars though you would need the # Y00408 though.
  view full answer...
• Roof Rack System for Thule Hullavator Pro Load Assist Kayak Carrier
  Both the Thule Hullavator # TH898 and the Yakima ShowDown # Y04081 are great kayak carriers but I prefer the Hullavator. Regardless of age, after a day of paddling the lift assist is awesome when it comes to helping you load your boat on top of your roof. You do need 4"-8" of overhang on your roof rack for this carrier to work. Your current roof rack on your 2010 Infiniti QX56 will not work. The only confirmed fit for your vehicle is a Thule Roof Rack system like Thule WingBar Evo Crossbars...
  view full answer...

Do you have a question about this Roof Rack?