Parts Needed to Install Yakima LockNLoad on 2018 Subaru Outback Limited for Rhino Rack Batwing

Question

Question:

Hi etrailer. Great site! So much good info. I have a quick question: To get the LockNLoad platform on my 2018 Subaru Outback, I need to buy the following: https://www.etrailer.com/question-427925.html 1 - Yakima LockNLoad platform: https://www.etrailer.com/Roof-Rack/Yakima/Y05044.html 2 sets of Crossbar Clamps: https://www.etrailer.com/Accessories-and-Parts/Yakima/Y05039.html - or I can buy them together here: https://www.etrailer.com/Roof-Basket/Yakima/Y05044-39.html What am I missing? Thanks! : I am looking to attach the Batwing to the LockNLoad. Thank you.

asked by: Troy

0

Expert Reply:

The easiest solution would be to order the part # Y05044-39 as this is a kit that includes both the # Y05044 and the # Y05039. The Rhino Rack Batwing part # RR33400 would easily fit to this as well since it can attach to the channels that are present on top of the LockNLoad.

expert reply by: Jameson C

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

Hello John, thanks for reaching out. Yes, we do have a Thule roof rack that will allow you to install the Hullavator #TH898 on your 2015 Subaru Forester. For that I recommend the following: - Thule WingBar Evo Roof Rack for Raised Rails - Aluminum -…

view full answer...

Answer 4

Hello Robert, thanks for reaching out. No, Yakima doesn’t make a bracket to run a LockNLoad platform directly on the old rain gutter towers like the #Y00101. Those platforms are built around their newer tower system, and the only adapters they offer…

view full answer...

Answer 5

For eye bolts that will fit in the t-slots of a Yakima LockNLoad Platform Rack, you can use the Eye Bolt Kit for Rhino-Rack Pioneer Platform Rack #RR43178 which will come with 4 eye bolts.

view full answer...

Answer 6

You should be able to use the Yakima LockNLoad Platform Roof Tray - Aluminum - 55" Long x 49" Wide, part #Y05044, on your vehicle. If your crossbars are at least 27" apart and less than 33" apart, you should not have any problems…

view full answer...

Answer 7

I checked with Yakima and the largest LockNLoad Platform Tray that will work with a roof rack system with two crossbars is the 60" Long x 54" Wide Yakima LockNLoad Platform Roof Tray #Y05045. To mount this tray to your BMW you will need the…

view full answer...

Answer 8

The Replacement Clamp #RRSP112 is a single clamp for the Rhino-Rack Roof Mounted Steel Cargo Basket #RMCB. Included is the clamp, screws, and all parts to secure the basket at one point to your crossbar.

view full answer...

Answer 9

The Conduit Clamp Set #RRBC2 that you referenced is designed specifically to mount to the C-channels that are present on Rhino-Rack Heavy Duty Crossbars. These particular model bars feature a unique C-channel that differs from the standard opening on…

view full answer...

Answer 10

Thanks for the photo, and yes, the LockNLoad will indeed fit to Rhino-Rack Vortex aero crossbars like your Rhino-Rack Vortex Crossbars for Retrax XR #RRVA180B-RRRLT600. You'll just need adapters to mount the platform, and here are the part…

view full answer...

Parts Needed to Install Yakima LockNLoad on 2018 Subaru Outback Limited for Rhino Rack Batwing

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching