See what our Experts say about this Yakima Roof Rack

• Recommended Fairing for Rola Roof rack on a 2009 Honda Accord Sedan
  Yes! Out of the variety of fairings that we have to offer I recommend the 40" long Inno Fairing # INA261 because it will fit perfectly with the 38" long Rola Sport Series Roof Rack # 59757 for your 2009 Honda Accord. If you let me know what you are wanting to use the roof rack for I can make additional recommendations for you. I have also attached an installation video and a picture of this roof rack on a 2009 Accord Sedan that you can reference.
  view full answer...
  
• Will the Thule Hullavator Pro Fit on Yakima HD Bars
  Yes. The Thule Hullavator Pro # TH898 will fit on Yakima HD Crossbars like the # Y01157 mounted either in the channels or using the clamp on mounts. Since the Hullavator Pro does not come with locks included you may want to consider adding those with the Thule One-Key System Lock Cylinders - Qty 2 # TH450200 to help keep the carrier and boats from walking away while you're out on the water.
  view full answer...
• Is Weight Capacity of Yakima CoreBar Crossbars Per Bar or for Pair
  The weight capacity of the Yakima CoreBar Crossbars like part # Y00421 is 220 lbs which is for loads evenly distributed across both bars. If you need a higher weight capacity, Yakima does off the HD Crossbars like part # Y01157 which have a 500 lb weight capacity. Please note, the feet and or vehicle roof may be rated lower and in which case you would abide by the lowest of the three components whether that be the crossbars, feet, or vehicle.
  view full answer...
• Is the Yakima Bedrock HD System Compatible with Yakima Jetstream Bars
  I might have a solution for you, but the Yakima Bedrock HD System # Y01160-58 are only compatible with the Yakima HD bars like the # Y01157. The Yakima Bedrock HD, Overhaul HD # Y01151-58 and Outpost HD # Y01152-58 systems are all only compatible with Yakima HD bars and there are no adapters available for the footpacks on the HD systems to allow for the attachment of other styles of bars. If you can let me know what kind of truck you have, I might be able to locate a truck bed rack system...
  view full answer...
• Yakima Roof Rack for 2023 Subaru Outback With Thule Hullavators
  Hi Tina; I also prefer Yakima so I'm glad we're on the same page. For your 2023 Outback and Hullavators I recommend the JetStream roof rack. You will need the following: -Yakima JetStream Crossbars # Y00426 -SkyLine Towers for Yakima Crossbars # Y53TR -Landing Pad 27 for Yakima SkyLine And Control Towers # Y46VR The JetStream crossbars are extremely quiet so you won't have a bunch of road noise added to your day to day driving. If you want to keep your rack secure you can also add the...
  view full answer...
• Will Installing Track Roof Rack System on A.R.E. Topper Void Warranty
  Installing a track system roof rack like the Yakima parts # Y01126, # Y00221, # Y8890027, and # Y00410 won't void the warranty for your pickup but from what I could find it looks like modifying your A.R.E. topper will void that warranty. Since we aren't an A.R.E. dealer I can't really confirm this, but from my research it is very likely that your warranty will be void. So you can have the track system professionally installed but that would be your choice whether you want to pursue this...
  view full answer...
  
• Lightweight Hitch Cargo Carrier for 2019 Tesla Model X
  The Curt cargo carrier part # C18100 is a lighter weight carrier due to it being made mostly out of aluminum. For a lighter weight option for your 2019 Tesla Model X with a hitch like the Draw Tite part # 76143 installed this would be a really great option. It weight just under 30 lbs. For a hitch lock that doubles as an anti-rattle device the part # 63232 would be a great option as well. This holds the shank of the carrier to the hitch tube so that movement and noise is removed. I attached...
  view full answer...
• Will RhinoRack Batwing Awning Work with Yakima HD bars
  Yes, the Rhino-Rack Batwing Awning Driver's Side # RR33100, or # RR33200 Passenger's Side are compatible with the Yakima HD Crossbars, like # Y01157. The Batwing uses the top channel on your Yakima bars to attach to them with the included hardware. Both the Yakima HD bars and the Rhino-Rack Vortex bars use a 7/16 inch wide top channel, so you'll just want to follow the same instructions as if you were mounting the awning on the Vortex bars. I've attached the complete installation instructions...
  view full answer...
  
• Parts Needed To Add 60" Yakima HD Crossbars To 2025 Subaru Outback Wilderness
  Hello Carol, welcome back. It is possible to use the Yakima HD Crossbars # Y01157 on your 2025 Subaru Outback Wilderness with the fixed raised bars. What you will need is the TimberLine Towers # Y33TR and the HD Bar Adapter # Y03541 to complete this setup. The HD bars are super solid so this is a good choice for two Hullavators and sea kayaks. Just please keep in mind that although the HD bars do have a 500 lb weight capacity, the TimberLine towers have a 220 lb weight capacity so this...
  view full answer...
• Recommended Roof Rack for Drywall and Lumber on 2019 Chevy Tahoe
  For your 2019 Tahoe, I recommend the Yakima system consisting of: Yakima HD Crossbars - Aluminum - Black - 60" Long # Y01157 SkyLine Towers # Y53TR HD Bar SL Adapters # Y03541 Landing Pad 17 # Y00243 I also recommend adding locks # Y07204 This system will give you strong crossbars with tie down points integrated as well as a load capacity of 165 lbs. It will work well for your drywall, plywood, and loads of lumber within that weight capacity.
  view full answer...
• Can Yakima Tracks or HD Crossbars Be Used for Offroad Animal Rails on a 2020 Jeep Grand Cherokee
  Hey Drew, thanks for reaching out and providing all of your information! The Yakima 54" Tracks for Roof Racks # Y01127 could potentially work, but the hardware that comes with it was designed for going through a roof and since your metal pieces are a bit thinner you might have to get creative with how the Yakima tracks attached to your Offroad Animal rails. If you wanted to just switch your current setup to HD bars then you'll need the 60" Bars # Y01157 and the SL Adapter Kit # Y03541...
  view full answer...
• Can Thule Hullavator Fit on Yakima HD Roof Rack that Fits 2020 Subaru Ascent
  The Yakima HD bars do have a channel on the top of them that a Thule Hullavator part # TH898 could easily attach to. There's a cover that's on them which is designed to lower wind noise but that easily comes off and is trimmable. So for a Yakima HD roof rack that fits your 2020 Subaru Ascent with raised rails you'd just need the part numbers # Y01157, # Y03541, and # Y33TR with the Hullavator and you'd be set.
  view full answer...
• Does The Length of the Yakima HD Crossbars Include The End Caps?
  The 60" Yakima HD Crossbars # Y01157 are going to be 60" from end to end including the caps. As you need 60" of T-slot you would need to step up to the 68" Crossbars # Y01158.
  view full answer...
• Correct Yakima Towers for a 2023 Toyota Sequoia
  The towers compatible with your 2023 Toyota Sequoia is going to be those TimberLine Towers for Yakima Crossbars # Y33TR. These towers will work with Yakima's JetStream # Y00426, HD # Y01157, CoreBar # Y00422, and RoundBars # Y00409.
  view full answer...
• Roof Rack for 2015 Toyota Tacoma Double Cab and Roof Rack for a Camper Shell
  I would be happy to help you find roof racks for both your 2015 Toyota Tacoma Double Cab and your camper shell. I'll start out with the roof rack for your truck. It is the 2015 Toyota Tacoma Roof Rack by Yakima. These 60" wide heavy-duty crossbars mount to Yakima towers to create an aftermarket roof rack. The top and bottom channels let you add channel-mount accessories. The tie-down points in the endcaps let you easily secure cargo. I have linked a picture of this roof rack installed as...
  view full answer...
  
• Recommended Roof Rack For A 2023 Ford F-150 Lightning
  The Rhino-Rack ROC25 Roof Rack for Naked Roofs # RR29XR would be the closest design to a "fixed" system like you were wanting. That being said, I personally prefer the Yakima HD line over most other roof rack/crossbar systems. The HD bars have a much sturdier design and come with fixed mounting points on each end of the crossbars so that you don't have to purchase additional components to secure your accessories. For your 2023 Ford F-150 Lightning you would need the following components...
  view full answer...
• Yakima HD Crossbar Rack For Retrax Pro XR Tonneau Cover
  You'll need an adapter but yes, the Yakima HD crossbars will work with the Retrax Pro XR tonneau cover. What you can use is the following: - Yakima HD Crossbars - 60" Long # Y01157, 68" Long # Y01158, or 78" Long # Y01159 (you'll need to measure to get the correct length - Landing Pad 1 # Y00221 (you'll need to order Qty 2 of this part number) - SkyLine Towers for Yakima Crossbars # Y53TR - HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers # Y03541
  view full answer...
• Yakima HD Roof Rack and LockNLoad Fitment on a 2021 GMC Yukon AT4
  The parts you need to build a Yakima HD roof rack kit for the flush rails on your 2021 GMC Yukon AT4 includes the following parts: 60" HD Crossbars - # Y01157 HD Bar SL Adapter - # Y03541 SightLine Towers - # Y64AR SightClip Fit Kit - # Y44UV Lock Core Kit - # Y07204 (optional) This will work great with the Yakima LockNLoad Platform Rack for Crossbars # Y45UV, but we still need to talk about the weight ratings as you do bring up a great point. The Yakima HD bars are actually rated for...
  view full answer...
• Malone Seawing Compatibility With Yakima HD Crossbars
  I went ahead and checked to see if the Malone Seawing # MPG107MD would fit the Yakima HD bars # Y01157 and they do not. The bolts are just a little too short. What you can do is either go to the hardware store and get similar bolts but longer or you can install it via t-track using this kit # MPG8287 to fit it into your T-Slots on your Yakima HD bars.
  view full answer...
• What Crossbar System, Platform, Hitch, and Bike Rack do You Recommend for My 2005 Honda Element?
  Yakima does make a square crossbar system for your bare roof 2005 Honda Element. I recommend the following parts: -Yakima HD Crossbars - Aluminum - Black - 60" Long # Y01157 -Towers # Y53TR -Adapters # Y03541 -Landing Pads # Y00229 As far as adding more racks to the setup, the only way to do it would be by attaching something like the SeaSucker Monkey Bars Roof Rack - Round Bars - Vacuum Cup Mount - 48" Long # 298-SX6000B to your roof as long as there is enough space either between,...
  view full answer...
  
• Malone Seawing Compatibility With Yakima HD Crossbars
  I went ahead and checked to see if the Malone Seawing # MPG107MD would fit the Yakima HD bars # Y01157 and they do not. The bolts are just a little too short. What you can do is either go to the hardware store and get similar bolts but longer or you can install it via t-track using this kit # MPG8287 to fit it into your T-Slots on your Yakima HD bars.
  view full answer...
• Does Thule Hullavator Fit Yakima HD Crossbars Using T-Slots
  Yes, you can absolutely mount your Thule Hullavator Pro Kayak Carrier # TH898 into the T-slot channels of the Yakima HD crossbars. The HD crossbars are available in the following sizes: - 55" Long: Yakima HD Crossbars # Y01156 - 60" Long: Yakima HD Crossbars # Y01157 - 68" Long: Yakima HD Crossbars # Y01158 - 78" Long: Yakima HD Crossbars # Y01159
  view full answer...
• Correct Size Yakima HD Crossbar for a 2016 Ford F-150
  The recommended size Yakima HD Crossbar for a 2016 Ford F-150 is 60", part # Y01157, this should provide around a 3-4" overhang which is standard. If you want to go with a longer option like 68" part # Y01158, you can do so but you'd have more overhang. This could be calculated for each bar size using the info above. In order to complete this setup you'll need the following; part # Y28TR, part # Y03541, and part # Y06122.
  view full answer...
• Weight Capacity of the Yakima HD Crossbars
  The Yakima HD Crossbar Set, part # Y01157, have a weight capacity of 500 lbs in conjunction (i.e. the two of them together can hold 500 lbs). The reason the single bar, part # YA34FR, states that its weight capacity is 500 lbs because these bars are intended to be used as a set (either with the same one or with another HD bar of a different length). Even with just the 500 lbs, this number is more than likely much higher than you can put on the top of your vehicle. Though these crossbars...
  view full answer...
• Recommended Fairing for Rola Roof rack on a 2009 Honda Accord Sedan
  Yes! Out of the variety of fairings that we have to offer I recommend the 40" long Inno Fairing # INA261 because it will fit perfectly with the 38" long Rola Sport Series Roof Rack # 59757 for your 2009 Honda Accord. If you let me know what you are wanting to use the roof rack for I can make additional recommendations for you. I have also attached an installation video and a picture of this roof rack on a 2009 Accord Sedan that you can reference.
  view full answer...
  
• Roof Rack and Ski Carrier to Fit 2019 Hyundai Santa Fe with Naked Roof
  Yakima has a really great roof rack for your 2019 Hyundai Santa Fe with a naked roof with the Baseline JetStream bar rack part numbers # Y28TR, # Y06151, # Y06154, and # Y00425 (see attached picture). This will give you an extremely high quality roof rack that has aero bars which will give you minimal wind noise. Then for a ski rack we have the FatCat EVO part # Y03096 which will hold 6 skis or part # Y03095 for up to 4. I attached a review video for this carrier for you to check out as well.
  view full answer...
  
• Kayak Rack and Load Assist for a 2018 Toyota Prius Prime Without Glass Roof
  Hey, Nick! Happy to help out. The best and easiest kayak rack to use with a load assist is the Thule Hullavator Pro # TH898. One big advantage is that everything is built into the carrier itself, here are no extra parts to remove or store. Personally, I’m not a fan of other load-assist options like the Malone DownLoader # MPG114MD-351XL, since you have to store the Telos legs inside your vehicle while traveling. That’s especially inconvenient if you’re working with a smaller vehicle. I...
  view full answer...
• Recommended Roof Rack and Bike Rack for a 2016 Lexus GSF
  The best option to transport a bike with your 2016 Lexus GSF is going to be to install a roof rack and attach a bike rack. The trunk mounted ones like item # SA805BL have mixed results and won't work with cars with spoilers. It doesn't look like your Lexus has any rails so to add a roof rack you will need the following parts: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip...
  view full answer...
• Which Yakima Roof Rack Fits 2022 Ford Maverick
  Hi Alvin, Nice choice going with the Yakima rack as they make really high-quality gear. As for the correct parts for your 2022 Ford Maverick, you can actually get everything combined with just one part number depending on the bars you want. You mentioned the FX, and that is a flush-style roof rack system, which means the bars only go the width of your roof with no overhang. The FX uses bars and towers that are combined, so they aren't actually separate; to go that route you'd just need...
  view full answer...
• Roof Rack With Longer Crossbars For 2023 Kia Sorento With Naked Roof
  Hello Katherine, thanks for reaching out. Yes, we do have a product that will work for you! The best option for this will be to go with a Yakima JetStream roof rack. The design of their bars and towers allows for longer than standard crossbars, so we can set you up with something longer. For the Yakima bars, a 60" crossbar will be the closest option for something longer than 56". Here are the parts you will need for the complete roof rack system: - Yakima JetStream Crossbars - Aluminum...
  view full answer...
• How Can I Tell if I have Fixed Mounting Points on My 2015 Mazda CX-5 for a Crossbar System?
  According to the specs I have, you may have fixed mounting points on those rubber strips on your 2015 Mazda CX-5. The way you can tell is if there is a small removable tab on those rails that cover the holes. I went ahead and attached a video of a 2015 Mazda CX-5 with fixed mounting points to give you perspective about what to look for. If you determine that you have fixed mounting points, I recommend the following setup: - Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 46" #...
  view full answer...
• How to Tell if Thule Hullavator Kayak Carrier Will Fit on a Tesla Model 3
  Both the current Hullavator Pro # TH898 and the older model, part 897XT that you have, require the crossbars to overhang the feet of the roof rack by 4" - 8" for their to be enough clearance to lower the carrier without making contact with any given vehicle. If you're Tesla Model 3 crossbars have a T-Slot, you still have the T-Slot mounting hardware, and the crossbars can achieve an overhang then you'll be good to go. The nice thing is that you already have this discontinued carrier so...
  view full answer...
• Will Installing Track Roof Rack System on A.R.E. Topper Void Warranty
  Installing a track system roof rack like the Yakima parts # Y01126, # Y00221, # Y8890027, and # Y00410 won't void the warranty for your pickup but from what I could find it looks like modifying your A.R.E. topper will void that warranty. Since we aren't an A.R.E. dealer I can't really confirm this, but from my research it is very likely that your warranty will be void. So you can have the track system professionally installed but that would be your choice whether you want to pursue this...
  view full answer...
  
• Should Rear Bar Sit Higher Than Front Bar on Yakima Roof Rack System for 2017 Honda Pilot
  The front and rear Yakima JetStream Crossbars like # Y00426 should be level to each other on your 2017 Honda Pilot. Looking through the installation instructions for the BaseLine Towers # Y28TR and Fit Kit # Y00146 for your Honda Pilot, it does appear that the feet are positioned onto contours that are on the vehicle's roof. To compensate for this and to make sure the front and rear bars are not mounted at different heights, the pitch setting on the Yakima Feet need to be adjusted. I recommend...
  view full answer...
  
• What is the Best 16 Cubic Foot Or More Cargo Box/Crossbars for My 2018 Nissan Murano SL?
  There are a couple options for a cargo box setup on your 2018 Nissan Murano SL with a bare roof. As far as the box, I recommend the Yakima SkyBox 16 Roof Cargo Box - 16 cu ft # Y95AV or the Yakima SkyBox 21 Rooftop Cargo Box - 21 cu ft # Y07337. The great thing about the SkyBoxes is that they include the SuperLatch system that ensures the lid is latched closed and locked. With this mechanism, the key cannot be removed unless the lid is closed properly. In addition, the SkyBoxes include...
  view full answer...
• Roof Rack Fit on 2012 Toyota Venza With Panoramic Sunroof
  There is one roof rack that is a confirmed fit for your 2012 Toyota Venza with a panoramic sunroof, though the sunroof should not be opened with the rack on. There isn't a roof rack available for your Venza that is going to allow normal use of the sunroof when the rack is on, but you can remove the rack if you like when you aren't using it in order to utilize the sunroof. The roof rack that fits your '12 Venza with a panoramic roof is an exceptionally nice one from Yakima, and consists...
  view full answer...
• Will the Thule Force XT L Fit My 2020 BMW X5?
  Yes, you will be able to fit the Thule Force XT L # TH6357B on your 2020 BMW X5's roof. Not only do you have enough roof for the required crossbar spread of 23-5/8 - 33 inches, you will also be able to mount the box to your roof and fully open your rear hatch. If you are wanting to go bigger, the Thule Force XT XL # TH6358B and XXL # TH6359B will fit as well. As far as mounting, you will need a crossbar system in order to secure the Force XT XXL to your roof. The setup you need depends...
  view full answer...
• Will a Yakima Roof Rack System Fit My 2020 Toyota Highlander LE?
  I confirmed with Yakima that mounting points that are on your bare roof of your 2020 Toyota Highlander will fit a roof rack system. After you pop off the tab that covers the mounting points, there is a screw that you will use to attach a roof rack system. I went ahead and attached a video that shows how you would attach a Yakima roof rack system on the 2020 Toyota Highlander. For the parts you need for that setup, you will need the following parts: - Yakima JetStream Crossbars - Aluminum...
  view full answer...
• Compatibility of 3 Bike Rack on 2015 Toyota Prius
  The Reese Q-Slot Platform-Style 2 Bike Rack is a fit for your 2015 Prius but has been discontinued. If you already have the rack it will work very well for you. I recommend using the included pin and clip for a secure fit in the hitch and then using a cable lock like # e98891 to secure your bikes to the rack. The 2 inch receiver only Reese Q-Slot Platform-Style 2 Bike and 4 Bike Rack PS63138 (also discontinued) was a 2 or 4 bike carrier, but would NOT work on your 2015 Toyota Prius...
  view full answer...
• Best Roof Rack for 2020 Kia Telluride With Naked Roof and How Does It Attach
  There are two roof configurations for a 2020 Kia Telluride, bare roof and flush side rails. The roof rack system for a bare roof attaches to the door jambs via car clips whereas the system for flush side rails attaches to the flush side rails. I recommend the Yakima JetStream Crossbar System part # Y00426, part # Y28TR, part # Y06125, and part # Y06165 if you have a bare roof. The Yakima Crossbar system is best because it has a custom fit for the best overall look, aero crossbars for...
  view full answer...
• Roof Rack And Bed Cover Recommendation For 2024 Ram 2500 Big Horn Crew Cab
  Hello Nancy, thanks for reaching out. We do have roof rack options for your 2024 Ram 2500 big horn crew cab, but sadly we do not have a fit for the Thule wingbars, so you will need to go with something different. For that I recommend going with a Yakima JetStream roof rack. The JetStream aero bars will work great with your Hullavator so here is what I recommend: - BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers...
  view full answer...
• Roof Rack and Board Carrier Recommendation for 2016 Toyota Prius V with Glass Roof
  For your 2016 Toyota Prius V you will need to install a roof rack to carry the boards you mentioned. Unfortunately only Yakima makes roof racks for your vehicle and they aren't exactly super cheap. So for that you would want the Yakima CoreBar part numbers # Y00425, # Y28TR, # Y06117, # Y06174. Which with that you'd be able to use the LockRack kpart # LR59FR that you referenced. This will attach to the crossbar by the top channel.
  view full answer...
• Can Yakima Roof Rack From 2000 Ford F250 Be Used On A 2025 Ford F350?
  Hello Lori, thanks for reaching out. You may be able to re use certain components from your old Yakima roof rack, but I would need to know specifically what parts you have in order to say for sure. If you have the Yakima BaseLine towers like part # Y28TR, those could be used on the 2025 F350, you would just need a new fit kit # Y06185. You might be able to re use you crossbars but again it depends what you have. Yakima recommends a 58" or 60" crossbar for the 2025 F350. If you can tell...
  view full answer...
• Recommended Roof Rack for 2013 Toyota Venza with Panoramic Glass Roof
  I do have a solution for you, however the Rhino-Rack roof rack that you referenced will not fit your 2013 Toyota Venza if it's equipped with the panoramic glass roof. None of the solutions from Rhino-Rack are compatible with the panoramic roof on your vehicle. I checked with Yakima though and they do state that their JetStream Crossbar system is compatible with the glass roof and will work great on your Venza. This roof rack consists of # Y00426 for the two 60 inch JetStream Crossbars,...
  view full answer...
• Yakima Roof Rack Parts List for a 2021 Dodge Durango with a Bare Roof
  Hey Kimlee, thanks for reaching out! Yes, the 60" # Y00426 JetStream Bars, BaseLine Towers # Y28TR, and 2 sets of the BaseClip Fit Kit # Y06180 will also fit your 2021 Dodge Durango with a bare roof (lock core kit # Y07204 optional). We do ship these to Canada as well!
  view full answer...
• What is Needed to Attach Yakima JetStream Crossbars to 2017 Honda CR-V With Bare Roof
  Hello Zeke, So we can get your 2017 Honda CR-V set up to mount Yakima JetStream Crossbars # Y00425, though there aren't actually different options for this. Reason for that is you can't mix and match different manufacturers parts because they won't fit together. That means to put the JetStream crossbars on the bare roof of your 2017 Honda CR-V you would have to use the following parts: - BaseLine Towers for Yakima Crossbars - Naked Roofs # Y28TR - BaseClip Fit Kit # Y06188 - BaseClip...
  view full answer...
• Roof Rack Recommendation for 2018 Toyota Camry Hybrid with Sun Roof
  For your 2018 Toyota Camry Yakima has the CoreBar roof rack with aero shaped crossbars part numbers # Y00421, # Y28TR, and # Y06192 that can be used on vehicles with sun roofs. But Yakima states to keep it closed when the rack is installed. For a carrier to carry your two kayaks we have the Thule Stacker part # TH830 then that would work well. This rack will hold the kayaks on end. See install video I attached.
  view full answer...
• Recommended Roof Rack for a 2022 Honda Insight
  Hey Andy! The 50" crossbars on the Yakima BaseLine Roof Rack Kit item # Y88UB can be swapped out but the next largest size is the 60" Long item # Y00429 so I do not think that's going to be a viable option. By law the crossbars are not supposed to stick out past the rear view mirrors. If you want to pursue this option you'll need the following parts: BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item...
  view full answer...
• Recommended Roof Rack For Attaching A Thule Hullavator To A 2021 Toyota Highlander
  To attach the Thule Hullavator Pro Kayak Carrier and Lift Assist with Tie-Downs # TH898 to your 2021 Toyota Highlander you'll need a roof rack that has a T-Slot in the crossbars for the Hullavator to slide into. Currently the only brand of roof racks we carry for your vehicle that are compatible with your flush mounted rails is Yakima. I recommend the following parts to complete your roof rack: Yakima HD Crossbars - 55" Long # Y01156 SkyLine Towers # Y53TR Landing Pad 28 # Y66VR HD...
  view full answer...
  
• Recommended Fairing for Rola Roof rack on a 2009 Honda Accord Sedan
  Yes! Out of the variety of fairings that we have to offer I recommend the 40" long Inno Fairing # INA261 because it will fit perfectly with the 38" long Rola Sport Series Roof Rack # 59757 for your 2009 Honda Accord. If you let me know what you are wanting to use the roof rack for I can make additional recommendations for you. I have also attached an installation video and a picture of this roof rack on a 2009 Accord Sedan that you can reference.
  view full answer...
  
• Recommended Roof Rack for Mounting a Thule Hullavator Pro on a 2021 Toyota RAV4
  The Thule Hullavator Pro, part # TH898, does in fact need crossbars that extend 4" - 8" beyond the feet. To use the flush rails on your 2021 Toyota RAV4, you will need a roof rack that has feet that are compatible with the rails. With those two stipulations in mind, the Thule WingBar Evos don't look like they will provide enough clearance with their 47" of crossbar length. Instead, I recommend the Yakima HD Crossbars, part # Y01156. They are 55" long, so they will have the extension you...
  view full answer...
• Parts Needed To Mount Yakima HD Bars To RSI Smartcap Evo Sport
  Hello Reed, thanks for reaching out. I looked up the RSI Smartcap Evo Sport and it looks like this already has T-tracks built in. You can use the TrackTowers # Y52AV and the HD Bar SL Adapters # Y03541 to mount the Yakima HD bars such as the # Y01158 which are 68" long. I do suggest you measure the distance between the tracks to make sure you get an appropriately sized crossbar.
  view full answer...
• Recommended Roof Rack For Installing A Yakima ShowDown Kayak Carrier On A 2021 Toyota Highlander
  For your 2021 Toyota Highlander with flush mounted rails I recommend the Roof Rack by Yakima which includes: Yakima HD Crossbars - Aluminum - Black - 55" Long - Qty 2 # Y01156 SkyLine Towers for Yakima Crossbars # Y53TR Landing Pad 28 for Yakima SkyLine And Control Towers - Qty 4 # Y66VR HD Bar SL Adapter # Y03541 The Yakima ShowDown Kayak or SUP Carrier and Lift Assist w/ Tie-Downs # Y04081 will clamp onto the crossbars of this roof rack system for an easy peasy installation. You will...
  view full answer...
• Will Installing Track Roof Rack System on A.R.E. Topper Void Warranty
  Installing a track system roof rack like the Yakima parts # Y01126, # Y00221, # Y8890027, and # Y00410 won't void the warranty for your pickup but from what I could find it looks like modifying your A.R.E. topper will void that warranty. Since we aren't an A.R.E. dealer I can't really confirm this, but from my research it is very likely that your warranty will be void. So you can have the track system professionally installed but that would be your choice whether you want to pursue this...
  view full answer...
  
• Lightweight Hitch Cargo Carrier for 2019 Tesla Model X
  The Curt cargo carrier part # C18100 is a lighter weight carrier due to it being made mostly out of aluminum. For a lighter weight option for your 2019 Tesla Model X with a hitch like the Draw Tite part # 76143 installed this would be a really great option. It weight just under 30 lbs. For a hitch lock that doubles as an anti-rattle device the part # 63232 would be a great option as well. This holds the shank of the carrier to the hitch tube so that movement and noise is removed. I attached...
  view full answer...
• Correct Size Inno Aero Crossbar for a 2015 Lexus GX 460
  The correct length Inno Aero Crossbar for a 2015 Lexus GX 460 is 48" for the front and 51" for the rear. The complete kit is composed of part # INXB123-130, part # INXS350, and part # INTR152. Unfortunately, the crossbars have channels underneath so you can only go so big and we can't recommend going with a larger size unfortunately.
  view full answer...
• Parts Needed To Add 60" Yakima HD Crossbars To 2025 Subaru Outback Wilderness
  Hello Carol, welcome back. It is possible to use the Yakima HD Crossbars # Y01157 on your 2025 Subaru Outback Wilderness with the fixed raised bars. What you will need is the TimberLine Towers # Y33TR and the HD Bar Adapter # Y03541 to complete this setup. The HD bars are super solid so this is a good choice for two Hullavators and sea kayaks. Just please keep in mind that although the HD bars do have a 500 lb weight capacity, the TimberLine towers have a 220 lb weight capacity so this...
  view full answer...
• Parts Needed To Add Single Yakima HD Crossbar To Roof Of a 2022 Toyota Tacoma Double Cab
  We do have a Single Yakima HD Crossbar # Y35FR which you can pair with the Two Towers # Y62TR. You will need the Adapters # Y03541 which we only carry as a set of 4 along with either the Front # Y06145 or Rear # Y06128 fit kit depending on if you plan on mounting it above the front doors or rear doors.
  view full answer...
• Recommended Roof Rack For A 2014 Subaru Outback Hauling Two 31" Wide Kayaks
  Hey Erik, With two 31" wide kayaks you'll have to go pretty wide on the crossbars to have enough length to accommodate both. I recommend the following roof rack components: TimberLine Towers for Yakima Crossbars # Y33TR HD Bar SL Adapter # Y03541 Yakima HD Crossbars - 68" Long # Y01158 I'd then switch from the clamp-mount LockRack carrier # LR24VR to the channel-mount version # LR88FR. This would allow you to mount the carriers into the track on top of the crossbars for a super easy...
  view full answer...
• Parts Needed For Adding Single Yakima HD Crossbar To Roof Of 2018 Chevrolet Silverado 1500
  The custom fit BaseClip Fit Kit # Y06122 which fits your 2018 Chevrolet Silverado 1500 extended cab is only designed to roof in the specific places given by Yakima. While you will be able to position the clips slightly forward or rearward of the measurements given by Yakima you will not be able to position them wherever you want due to how the clips are going to fit your door/roofline. Since you are only wanting to add 1 Yakima HD Crossbar # YA34FR you will want the Towers # Y62TR, HD Bar...
  view full answer...
• Recommended Roof Rack for Drywall and Lumber on 2019 Chevy Tahoe
  For your 2019 Tahoe, I recommend the Yakima system consisting of: Yakima HD Crossbars - Aluminum - Black - 60" Long # Y01157 SkyLine Towers # Y53TR HD Bar SL Adapters # Y03541 Landing Pad 17 # Y00243 I also recommend adding locks # Y07204 This system will give you strong crossbars with tie down points integrated as well as a load capacity of 165 lbs. It will work well for your drywall, plywood, and loads of lumber within that weight capacity.
  view full answer...
• Can Yakima Tracks or HD Crossbars Be Used for Offroad Animal Rails on a 2020 Jeep Grand Cherokee
  Hey Drew, thanks for reaching out and providing all of your information! The Yakima 54" Tracks for Roof Racks # Y01127 could potentially work, but the hardware that comes with it was designed for going through a roof and since your metal pieces are a bit thinner you might have to get creative with how the Yakima tracks attached to your Offroad Animal rails. If you wanted to just switch your current setup to HD bars then you'll need the 60" Bars # Y01157 and the SL Adapter Kit # Y03541...
  view full answer...
• Can Thule Hullavator Fit on Yakima HD Roof Rack that Fits 2020 Subaru Ascent
  The Yakima HD bars do have a channel on the top of them that a Thule Hullavator part # TH898 could easily attach to. There's a cover that's on them which is designed to lower wind noise but that easily comes off and is trimmable. So for a Yakima HD roof rack that fits your 2020 Subaru Ascent with raised rails you'd just need the part numbers # Y01157, # Y03541, and # Y33TR with the Hullavator and you'd be set.
  view full answer...
• Roof Rack Options For Carrying The Thule Hullavator On A 2022 Chevy Tahoe
  Hi Kristen! The Thule Hullavator requires anywhere from 4 to 8 inches of overhang past the tower to make sure it will not come in contact with your 2022 Chevy Tahoe. You didn't mention if you were going to running just one or one on each side, so that is definitely something to take into account. That said, these are going to be your two best options: Aero Bar Option: Yakima JetStream Crossbars - Aluminum - Black - 70" Long - Qty 2 # Y00427 SightLine Towers for Yakima Crossbars - Flush...
  view full answer...
• Availability of Roof Rack That Fits 2 Old Town Sportsman Autopilot 120 Fishing Kayaks
  Hey Philip! It looks like the kayaks are 37" wide so 74" for both. The Yakima HD Crossbars # Y01159 are 78" long and can be installed using the # TimberLine Towers # Y33TR and HD Bar Adapter # Y03541. However, the specs show these weigh 152 lbs each, is that correct? The weight limit of the feet/towers is 220 lbs so if they are that heavy a roof rack won't be an option. Your vehicle roof capacity may not be high enough to hold them either. If the total weight of your kayaks is 304 lbs...
  view full answer...
• Recommended Ladder Rack And Roof Rack Combo For A 2024 Ford Maverick Hauling Ladders And Canoes
  Hey Rueben, Thule doesn't have a ladder rack fit for the 2024 Ford Maverick so you'll need to go with a different rack. The Yakima OverHaul HD Adjustable Truck Bed Ladder Rack # Y01151-57 would be the best option since its tower height can be adjusted from 19" up to 30" tall from the top of the bedrails. To add on an additional crossbar to the roof of your Maverick you would need the following components: BaseClip Fit Kit # Y06180 BaseLine Towers # Y62TR HD Bar SL Adapter # Y03541 Yakima...
  view full answer...
• Will HD Bar SL Adapter Kit Fit the Yakima SightLine Towers
  Hey Dan, thanks for reaching out! Yes, the HD Bar SL Adapter Kit # Y03541 will fit the newer gen SightLine Towers # Y64AR. Do you already have the Yakima HD Bars? If not, what is the year/make/model of your vehicle so I can make sure you get the right length?
  view full answer...
• Parts Needed to Add Yakima Crossbars to Retrax Tonneau Cover with T-Slot Rails
  For your setup I recommend the TrackTowers for Yakima Crossbars and Platforms - Track Mount # Y52AV which includes everything you need to mount Yakima crossbars to your Retrax cover (unless you plan on using the Round or HD bars - then you'll need an additional adapter). To mount the SkyLine Towers # Y53TR to your tonneau cover you would need the 2 of the Landing Pad 1 # Y00221 kits as well which is why I recommend the first kit I mentioned. Most truck ladder racks use longer crossbars...
  view full answer...
• Recommended Roof Rack for a 2023 Kia Sorento w/ a Naked Roof
  To attach a roof rack to your 2023 Kia Sorento, with no roof rails, you will want the roof rack by Yakima and it includes the following parts: Yakima HD Crossbars - Aluminum - Black - 55" Long - Qty 2 item # Y01156 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR HD Bar SL Adapter for Yakima BaseLine,Towers - Qty 4 item # Y03541 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06175 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers -...
  view full answer...
  
• Roof Rack for 2015 Toyota Tacoma Double Cab and Roof Rack for a Camper Shell
  I would be happy to help you find roof racks for both your 2015 Toyota Tacoma Double Cab and your camper shell. I'll start out with the roof rack for your truck. It is the 2015 Toyota Tacoma Roof Rack by Yakima. These 60" wide heavy-duty crossbars mount to Yakima towers to create an aftermarket roof rack. The top and bottom channels let you add channel-mount accessories. The tie-down points in the endcaps let you easily secure cargo. I have linked a picture of this roof rack installed as...
  view full answer...
  
• Recommended Roof Rack For A 2023 Ford F-150 Lightning
  The Rhino-Rack ROC25 Roof Rack for Naked Roofs # RR29XR would be the closest design to a "fixed" system like you were wanting. That being said, I personally prefer the Yakima HD line over most other roof rack/crossbar systems. The HD bars have a much sturdier design and come with fixed mounting points on each end of the crossbars so that you don't have to purchase additional components to secure your accessories. For your 2023 Ford F-150 Lightning you would need the following components...
  view full answer...
• Parts Needed to Add Yakima Rack to Diamondback SE Tonneau Cover on Ford Super Duty
  We can get your Ford Super Duty set up with a Yakima rack for your Diamondback SE tonneau cover. The Q Towers are no longer made and aren't compatible with Yakima's latest racks, so you'll need a new set of towers for the system. Here is exactly what you'll need: - Yakima 72" HD Tracks for Diamondback Truck Covers # Y92AR - Yakima HD Crossbars - 78" Long # Y01159 - SkyLine Towers # Y53TR - HD Bar SL Adapter # Y03541 - Landing Pad 26 for Yakima SkyLine Towers # Y75ZR You'll need a...
  view full answer...
• Roof Rack With Longer Crossbars For 2023 Kia Sorento With Naked Roof
  Hello Katherine, thanks for reaching out. Yes, we do have a product that will work for you! The best option for this will be to go with a Yakima JetStream roof rack. The design of their bars and towers allows for longer than standard crossbars, so we can set you up with something longer. For the Yakima bars, a 60" crossbar will be the closest option for something longer than 56". Here are the parts you will need for the complete roof rack system: - Yakima JetStream Crossbars - Aluminum...
  view full answer...
• Will a Yakima Roof Rack System Fit My 2020 Toyota Highlander LE?
  I confirmed with Yakima that mounting points that are on your bare roof of your 2020 Toyota Highlander will fit a roof rack system. After you pop off the tab that covers the mounting points, there is a screw that you will use to attach a roof rack system. I went ahead and attached a video that shows how you would attach a Yakima roof rack system on the 2020 Toyota Highlander. For the parts you need for that setup, you will need the following parts: - Yakima JetStream Crossbars - Aluminum...
  view full answer...
• Hitch, Bike Rack, Roof Rack, Kayak Carrier for 2022 Toyota Highlander LE
  The Curt hitch part # C99FR is a really great option for a trailer hitch for a bike rack and would be what I would recommend as the best. It's mostly hidden and has great towing capacities plus is made in the USA. The best bike rack for you will be the best one that fits your needs. Most people prefer the platform style bike racks as they are the easiest to load and carry the bikes in the most stable way. So one of my favorites is the Thule EasyFold XT part # TH903202 which is lighter...
  view full answer...
• Roof Rack Kit For Carrying A Thule Hullavator On A 2024 Toyota Corolla Cross
  Hi Jennifer! You want 4" to 8" of crossbar after the tower in order for a Thule Hullavator # TH898 to not make contact with the vehicle when in the lowered position. Since you mentioned the roof on your 2024 Toyota Corolla Cross being narrow compared to the body, I would recommend going as wide as you can, just to be sure. With that said, I have 70" crossbar options listed below. You didn't mention if your Corolla Cross had flush mounted rails running from the front to the back or if you...
  view full answer...
• Recommended Roof Rack for a 2023 Kia Sorento w/ a Naked Roof
  To attach a roof rack to your 2023 Kia Sorento, with no roof rails, you will want the roof rack by Yakima and it includes the following parts: Yakima HD Crossbars - Aluminum - Black - 55" Long - Qty 2 item # Y01156 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR HD Bar SL Adapter for Yakima BaseLine,Towers - Qty 4 item # Y03541 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06175 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers -...
  view full answer...
  
• Will the Thule Hullavator Fit on Yakima Jetstream Crossbars on a 2021 Toyota Highlander
  The Thule Hullavator # TH898 will fit on the Yakima Jetstream bars without any issues and I do recommend going with the 60" bars just to ensure that you've got the needed clearance to use the Hullavator's lift assist system. If you've got a naked roof you'll want the Yakima roof rack system that uses parts # Y00426, # Y28TR, # Y06153 and # Y06132. If you've got the flush mounted rails you'll want to use # Y00426 for the bars still but use the # Y53TR and # Y66VR for the towers and landing...
  view full answer...
• Will the Thule Force XT XL Rooftop Cargo Box Fit a 2021 Toyota Highlander
  In order to use a cargo box on a 2021 Toyota Highlander you'll first need a roof rack like the Yakima JetStream Crossbar System composed of part # Y00426, part # Y28TR, part # Y06153, and part # Y06132. This will then allow you to mount a cargo box like the Thule Force XT XL Rooftop Cargo Box part # TH6358B. The Force XT XL will be a great size for the Highlander. This is a larger SUV so you can get away with a larger box. It will indeed cover the moonroof but you wouldn't want to open...
  view full answer...
• Recommended Roof Rack and Kayak Carrier For 2022 Toyota Highlander With Bare Roof
  We sure do! For your 2022 Toyota Highlander I recommend the Yakima Roof Rack System which uses 60" Yakima JetStream Crossbars in Black # Y00426, Yakima Base Line Towers # Y28TR, BaseClip Fit Kit # Y06153, and BaseClip Fit Kit # Y06132. I do also recommend adding the Yakima Same Key System Lock Cores # Y07204 to the towers to keep them secured to the roof of your Highlander. This system will give you 60" of useable crossbar space with a 165lb weight capacity which will be perfect for a...
  view full answer...
• Recommended Roof Rack for 2020 Chevy Traverse Without Side Rails
  For your 2020 Chevy Traverse, if you don't have the factory installed raised side rails, then you absolutely can still add a roof rack but it will use a custom fit kit. My recommendation for a naked roof is: Yakima JetStream Crossbars # Y00426 BaseLine Towers # Y28TR BaseClip Fit Kit # Y06153 There is not a rail system to add to your roof, so this is the best option and is rated for 165 lbs.
  view full answer...
• Best Roof Rack For 2025 Toyota Corolla Cross WIth Bare Roof
  The best roof rack for your 2024 Toyota Corolla Cross with a bare roof is from Yakima, and consists of the following part numbers: - Yakima JetStream Crossbars - Silver # Y00428 or Black # Y00425 - BaseLine Towers # Y28TR - BaseClip Fit Kit # Y06153 - BaseClip Fit Kit # Y06154 I really like the Yakima brand due to how quiet the bars are; they have what are called "WindRidges" on top that control the flow of the air both over and under the bar, which minimizes both vibration of the...
  view full answer...
• Roof Rack Recommendation for a 2013 Hyundai Sonata Hybrid with Panoramic Roof
  The roof rack I recommend for your 2013 Hyundai Sonata Hybrid is the Yakima JetStream which includes the following parts: - 50" JetStream Crossbars # Y00425 - BaseLine Towers # Y28TR - BaseClip Fit Kits # Y06144 and # Y06153 - Lock Core Kit # Y07204 This has been confirmed by Yakima to fit with the larger panoramic roof you have, and we actually shot an install video of this exact roof rack on a 2011 Sonata that I'm linking for you to reference. If you let me know what you plan on...
  view full answer...
• Roof Rack Recommendation for a 2019 Chevrolet Traverse LS
  I have excellent roof rack options for your 2019 Chevrolet Traverse LS that will accept a variety of roof mounted accessories, both track mount and clamp on. For this, I really like the Yakima JetStream System because they are aerodynamic, lightweight, and have a sleek look. The aerodynamic shape is going to reduce wind drag and noise which is not something most think about when looking at a roof rack. The correct parts for you will vary if you have a bare roof or raised side rails. I have...
  view full answer...
• Thule Kayak Carrier Recommendation for T-Slot Mount on Yakima JetStream Crossbars on 2022 Highlander
  It truly depends on what Thule kayak carrier you wish to use on the Yakima JetStream Crossbars. For example, the Thule DockGlide # TH896 is compatible with the top slots of the JetStream crossbars without any additional nuts. I definitely recommend the DockGlide because it is a saddle-mount style that is much easier to load than the awkward positioning of j-style carriers. In order to have a full JetStream setup of a roof rack on your 2022 Toyota Highlander, it depends on what roof type...
  view full answer...
• Recommended Roof Rack For A 2022 Toyota Highlander XLE
  If your 2022 Toyota Highlander has flush mounted rails that run from the front to the back of the vehicle then I recommend the following parts: Yakima HD Crossbars - Aluminum - Black - 55" Long - Qty 2 # Y01156 SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems - Qty 4 # Y53TR HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4 # Y03541 Landing Pad 27 for Yakima SkyLine And Control Towers - Qty 4 # Y66VR If...
  view full answer...
• How to Add Platform Rack to 2020 Toyota Highlander With Naked Roof
  While you can add a platform rack to your 2020 Toyota Highlander, I checked with our manufacturers and there isn't a direct-mount option for your vehicle. So the only option for your Highlander, assuming it does have a naked roof without flush rails, is to add a roof rack which you can then add the platform rack to. There is one option for this from Yakima, and I verified with them the correct parts for the rack, as well as the correct size of platform needed. The exact parts that will...
  view full answer...
• Recommended Roof Rack and Cargo Basket for a 2020 Chevy Traverse
  Since your 2020 Chevy Traverse does not have side rails and you are wanting to add a cargo basket, I recommend the Roof Rack by Yakima and it includes the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - JetStream Aero Crossbars - Black - Qty 2 item # Y39UV BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 4 item # Y06153 This is a flush mounted roof rack that will not extend past the side of the mounting legs. This is a more streamlined system than others which...
  view full answer...
• Is There A Better Roof Rack Solution For A 2011 Toyota Corolla Than My Yakima Q-Towers
  The aftermarket roof tracks, such as the Rhino-Rack RT-Style Roof Rack Tracks - Rivet Mount - 39-3/16" Long - Qty 2, part # RRRTS534, are not test fit for vehicles. The rack manufacturers recommend that you to a garage that specializes in aftermarket body work to do the installation. It will be up to the shop you take your 2011 Toyota Corolla to determine whether or not the Rhino-Rack RT Style Roof Rack will fit your vehicle. If you get the OK for the Rhino Rack tracks you will need these...
  view full answer...
• Recommended Roof Rack for a 2020 Kia Sportage w/out Roof Rails
  Yes, we do have options to add a roof rack to your 2020 Kia Sportage without roof rails. I recommend the Kia Sportage Roof Rack by Yakima. You will need the following parts: Yakima HD Crossbars 500 lbs Capacity Aluminum - Black - 55" Long - Qty 2 item # Y01156 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4 item # Y03541 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers...
  view full answer...
• Will Yakima Q Towers Fit a 2009 Honda Fit
  I contacted Yakima directly and they informed me that the older Q Towers will not fit the 2009 Honda Fit. You will need to rebuild your tower, though an older Yakima Round Bar will still be useable. To replace the roof rack for your vehicle, you'll need: - Yakima BaseLine Towers, part # Y28TR - RoundBar SL Adapter for Yakima Towers, part # Y03536 - BaseClip Fit Kit for Baseline Roof Rack, part # Y06145 - BaseClip Fit Kit for Baseline Roof Rack, part # Y06153 Note that you'll need both...
  view full answer...
• Roof Rack Recommendation for Bike Rack and Cargo Box on 2022 Toyota Corolla Cross with Naked Roof
  Thanks for reaching out! For your application we'll need to stick with the Yakima JetStream system since Thule doesn't have a fit for your 2022 Toyota Corolla Cross naked roof at this time (January 2023). The 50" JetStream crossbars will be a great size for fitting both the Thule FastRide Roof Bike Rack # TH95JV and Thule Force XT Sport Rooftop Cargo Box # TH6356B. Here are the parts you'll need for the complete roof rack system: 50" JetStream Crossbars - Black # Y00425 or Silver # Y00428 BaseLine...
  view full answer...
• How to Use Yakima RoundBar Crossbars on a 2022 Toyota Highlander with Bare Roof It does not have
  In order to use Yakima RoundBar Crossbars on a 2022 Toyota Highlander with bare roof you'll need the following: BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 part # Y28TR RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4 part # Y03536 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 part # Y06153 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 part # Y06132
  view full answer...
• Roof Rack for 2020 Toyota Highlander to Carry Thule Motion XT XL Cargo Box
  Yes, the Thule Motion XT Roof Cargo Box part # TH629806 that you referenced does fit the Yakima Jetstream roof rack that is a confirmed fit for your 2020 Toyota Highlander with flush mounted roof rails: JetStream Crossbars # Y00426 BaseLine Towers for Yakima Crossbars # Y00146 Landing Pad 28 # Y06153 Landing Pad # Y06132
  view full answer...
• SportRack Vista XL Opening Cargo Box Compatibility With A 2020 Toyota Highlander
  Crossbar spread is normally measured from center to center of the crossbars themselves. The SportRack Vista XL Cargo Box # SR7018 can fit a crossbar spread of 23-5/8", 25-7/8", 27-7/8", or 29-7/8" so you'll definitely be able to get it to fit on your 2020 Toyota Highlander. If you don't already have a roof rack system on your Highlander then I recommend the 2020 Toyota Highlander Roof Rack by Yakima which includes the following parts: Yakima JetStream Crossbars - Aluminum - Black - 60"...
  view full answer...
• Parts Needed To Install Roof Rack On a 2023 Toyota Corolla Cross
  Here is a list of the parts needed to install a Yakima JetStream roof rack on your 2023 Toyota Corolla Cross. Yakima JetStream Crossbars - Aluminum - Silver - 50" Long # Y00428 BaseLine Towers for Yakima Crossbars - Naked Roofs # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06154 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06153 You can add the Yakima Same Key System # Y07208 to lock your roof rack to your Toyota. This kit included 8 lock cores, four of...
  view full answer...
• Roof Rack With Longer Crossbars For 2023 Kia Sorento With Naked Roof
  Hello Katherine, thanks for reaching out. Yes, we do have a product that will work for you! The best option for this will be to go with a Yakima JetStream roof rack. The design of their bars and towers allows for longer than standard crossbars, so we can set you up with something longer. For the Yakima bars, a 60" crossbar will be the closest option for something longer than 56". Here are the parts you will need for the complete roof rack system: - Yakima JetStream Crossbars - Aluminum...
  view full answer...
• Will a Yakima Roof Rack System Fit My 2020 Toyota Highlander LE?
  I confirmed with Yakima that mounting points that are on your bare roof of your 2020 Toyota Highlander will fit a roof rack system. After you pop off the tab that covers the mounting points, there is a screw that you will use to attach a roof rack system. I went ahead and attached a video that shows how you would attach a Yakima roof rack system on the 2020 Toyota Highlander. For the parts you need for that setup, you will need the following parts: - Yakima JetStream Crossbars - Aluminum...
  view full answer...
• Hitch, Bike Rack, Roof Rack, Kayak Carrier for 2022 Toyota Highlander LE
  The Curt hitch part # C99FR is a really great option for a trailer hitch for a bike rack and would be what I would recommend as the best. It's mostly hidden and has great towing capacities plus is made in the USA. The best bike rack for you will be the best one that fits your needs. Most people prefer the platform style bike racks as they are the easiest to load and carry the bikes in the most stable way. So one of my favorites is the Thule EasyFold XT part # TH903202 which is lighter...
  view full answer...
• Roof Rack Kit For Carrying A Thule Hullavator On A 2024 Toyota Corolla Cross
  Hi Jennifer! You want 4" to 8" of crossbar after the tower in order for a Thule Hullavator # TH898 to not make contact with the vehicle when in the lowered position. Since you mentioned the roof on your 2024 Toyota Corolla Cross being narrow compared to the body, I would recommend going as wide as you can, just to be sure. With that said, I have 70" crossbar options listed below. You didn't mention if your Corolla Cross had flush mounted rails running from the front to the back or if you...
  view full answer...
• Recommended Roof Rack for a 2023 Kia Sorento w/ a Naked Roof
  To attach a roof rack to your 2023 Kia Sorento, with no roof rails, you will want the roof rack by Yakima and it includes the following parts: Yakima HD Crossbars - Aluminum - Black - 55" Long - Qty 2 item # Y01156 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR HD Bar SL Adapter for Yakima BaseLine,Towers - Qty 4 item # Y03541 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06175 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers -...
  view full answer...
  
• Will the Thule Hullavator Fit on Yakima Jetstream Crossbars on a 2021 Toyota Highlander
  The Thule Hullavator # TH898 will fit on the Yakima Jetstream bars without any issues and I do recommend going with the 60" bars just to ensure that you've got the needed clearance to use the Hullavator's lift assist system. If you've got a naked roof you'll want the Yakima roof rack system that uses parts # Y00426, # Y28TR, # Y06153 and # Y06132. If you've got the flush mounted rails you'll want to use # Y00426 for the bars still but use the # Y53TR and # Y66VR for the towers and landing...
  view full answer...
• Will the Thule Force XT XL Rooftop Cargo Box Fit a 2021 Toyota Highlander
  In order to use a cargo box on a 2021 Toyota Highlander you'll first need a roof rack like the Yakima JetStream Crossbar System composed of part # Y00426, part # Y28TR, part # Y06153, and part # Y06132. This will then allow you to mount a cargo box like the Thule Force XT XL Rooftop Cargo Box part # TH6358B. The Force XT XL will be a great size for the Highlander. This is a larger SUV so you can get away with a larger box. It will indeed cover the moonroof but you wouldn't want to open...
  view full answer...
• Recommended Roof Rack and Kayak Carrier For 2022 Toyota Highlander With Bare Roof
  We sure do! For your 2022 Toyota Highlander I recommend the Yakima Roof Rack System which uses 60" Yakima JetStream Crossbars in Black # Y00426, Yakima Base Line Towers # Y28TR, BaseClip Fit Kit # Y06153, and BaseClip Fit Kit # Y06132. I do also recommend adding the Yakima Same Key System Lock Cores # Y07204 to the towers to keep them secured to the roof of your Highlander. This system will give you 60" of useable crossbar space with a 165lb weight capacity which will be perfect for a...
  view full answer...
• Recommended Roof Rack for 2020 Chevy Traverse Without Side Rails
  For your 2020 Chevy Traverse, if you don't have the factory installed raised side rails, then you absolutely can still add a roof rack but it will use a custom fit kit. My recommendation for a naked roof is: Yakima JetStream Crossbars # Y00426 BaseLine Towers # Y28TR BaseClip Fit Kit # Y06153 There is not a rail system to add to your roof, so this is the best option and is rated for 165 lbs.
  view full answer...
• Best Roof Rack For 2025 Toyota Corolla Cross WIth Bare Roof
  The best roof rack for your 2024 Toyota Corolla Cross with a bare roof is from Yakima, and consists of the following part numbers: - Yakima JetStream Crossbars - Silver # Y00428 or Black # Y00425 - BaseLine Towers # Y28TR - BaseClip Fit Kit # Y06153 - BaseClip Fit Kit # Y06154 I really like the Yakima brand due to how quiet the bars are; they have what are called "WindRidges" on top that control the flow of the air both over and under the bar, which minimizes both vibration of the...
  view full answer...
• Roof Rack Recommendation for a 2013 Hyundai Sonata Hybrid with Panoramic Roof
  The roof rack I recommend for your 2013 Hyundai Sonata Hybrid is the Yakima JetStream which includes the following parts: - 50" JetStream Crossbars # Y00425 - BaseLine Towers # Y28TR - BaseClip Fit Kits # Y06144 and # Y06153 - Lock Core Kit # Y07204 This has been confirmed by Yakima to fit with the larger panoramic roof you have, and we actually shot an install video of this exact roof rack on a 2011 Sonata that I'm linking for you to reference. If you let me know what you plan on...
  view full answer...
• Roof Rack Recommendation for a 2019 Chevrolet Traverse LS
  I have excellent roof rack options for your 2019 Chevrolet Traverse LS that will accept a variety of roof mounted accessories, both track mount and clamp on. For this, I really like the Yakima JetStream System because they are aerodynamic, lightweight, and have a sleek look. The aerodynamic shape is going to reduce wind drag and noise which is not something most think about when looking at a roof rack. The correct parts for you will vary if you have a bare roof or raised side rails. I have...
  view full answer...
• Thule Kayak Carrier Recommendation for T-Slot Mount on Yakima JetStream Crossbars on 2022 Highlander
  It truly depends on what Thule kayak carrier you wish to use on the Yakima JetStream Crossbars. For example, the Thule DockGlide # TH896 is compatible with the top slots of the JetStream crossbars without any additional nuts. I definitely recommend the DockGlide because it is a saddle-mount style that is much easier to load than the awkward positioning of j-style carriers. In order to have a full JetStream setup of a roof rack on your 2022 Toyota Highlander, it depends on what roof type...
  view full answer...
• Recommended Roof Rack For A 2022 Toyota Highlander XLE
  If your 2022 Toyota Highlander has flush mounted rails that run from the front to the back of the vehicle then I recommend the following parts: Yakima HD Crossbars - Aluminum - Black - 55" Long - Qty 2 # Y01156 SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems - Qty 4 # Y53TR HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4 # Y03541 Landing Pad 27 for Yakima SkyLine And Control Towers - Qty 4 # Y66VR If...
  view full answer...
• How to Add Platform Rack to 2020 Toyota Highlander With Naked Roof
  While you can add a platform rack to your 2020 Toyota Highlander, I checked with our manufacturers and there isn't a direct-mount option for your vehicle. So the only option for your Highlander, assuming it does have a naked roof without flush rails, is to add a roof rack which you can then add the platform rack to. There is one option for this from Yakima, and I verified with them the correct parts for the rack, as well as the correct size of platform needed. The exact parts that will...
  view full answer...
• Recommended Roof Rack and Cargo Basket for a 2020 Chevy Traverse
  Since your 2020 Chevy Traverse does not have side rails and you are wanting to add a cargo basket, I recommend the Roof Rack by Yakima and it includes the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - JetStream Aero Crossbars - Black - Qty 2 item # Y39UV BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 4 item # Y06153 This is a flush mounted roof rack that will not extend past the side of the mounting legs. This is a more streamlined system than others which...
  view full answer...
• Is There A Better Roof Rack Solution For A 2011 Toyota Corolla Than My Yakima Q-Towers
  The aftermarket roof tracks, such as the Rhino-Rack RT-Style Roof Rack Tracks - Rivet Mount - 39-3/16" Long - Qty 2, part # RRRTS534, are not test fit for vehicles. The rack manufacturers recommend that you to a garage that specializes in aftermarket body work to do the installation. It will be up to the shop you take your 2011 Toyota Corolla to determine whether or not the Rhino-Rack RT Style Roof Rack will fit your vehicle. If you get the OK for the Rhino Rack tracks you will need these...
  view full answer...
• Recommended Roof Rack for a 2020 Kia Sportage w/out Roof Rails
  Yes, we do have options to add a roof rack to your 2020 Kia Sportage without roof rails. I recommend the Kia Sportage Roof Rack by Yakima. You will need the following parts: Yakima HD Crossbars 500 lbs Capacity Aluminum - Black - 55" Long - Qty 2 item # Y01156 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4 item # Y03541 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers...
  view full answer...
• Will Yakima Q Towers Fit a 2009 Honda Fit
  I contacted Yakima directly and they informed me that the older Q Towers will not fit the 2009 Honda Fit. You will need to rebuild your tower, though an older Yakima Round Bar will still be useable. To replace the roof rack for your vehicle, you'll need: - Yakima BaseLine Towers, part # Y28TR - RoundBar SL Adapter for Yakima Towers, part # Y03536 - BaseClip Fit Kit for Baseline Roof Rack, part # Y06145 - BaseClip Fit Kit for Baseline Roof Rack, part # Y06153 Note that you'll need both...
  view full answer...
• Roof Rack Recommendation for Bike Rack and Cargo Box on 2022 Toyota Corolla Cross with Naked Roof
  Thanks for reaching out! For your application we'll need to stick with the Yakima JetStream system since Thule doesn't have a fit for your 2022 Toyota Corolla Cross naked roof at this time (January 2023). The 50" JetStream crossbars will be a great size for fitting both the Thule FastRide Roof Bike Rack # TH95JV and Thule Force XT Sport Rooftop Cargo Box # TH6356B. Here are the parts you'll need for the complete roof rack system: 50" JetStream Crossbars - Black # Y00425 or Silver # Y00428 BaseLine...
  view full answer...
• How to Use Yakima RoundBar Crossbars on a 2022 Toyota Highlander with Bare Roof It does not have
  In order to use Yakima RoundBar Crossbars on a 2022 Toyota Highlander with bare roof you'll need the following: BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 part # Y28TR RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4 part # Y03536 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 part # Y06153 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 part # Y06132
  view full answer...
• Roof Rack for 2020 Toyota Highlander to Carry Thule Motion XT XL Cargo Box
  Yes, the Thule Motion XT Roof Cargo Box part # TH629806 that you referenced does fit the Yakima Jetstream roof rack that is a confirmed fit for your 2020 Toyota Highlander with flush mounted roof rails: JetStream Crossbars # Y00426 BaseLine Towers for Yakima Crossbars # Y00146 Landing Pad 28 # Y06153 Landing Pad # Y06132
  view full answer...
• SportRack Vista XL Opening Cargo Box Compatibility With A 2020 Toyota Highlander
  Crossbar spread is normally measured from center to center of the crossbars themselves. The SportRack Vista XL Cargo Box # SR7018 can fit a crossbar spread of 23-5/8", 25-7/8", 27-7/8", or 29-7/8" so you'll definitely be able to get it to fit on your 2020 Toyota Highlander. If you don't already have a roof rack system on your Highlander then I recommend the 2020 Toyota Highlander Roof Rack by Yakima which includes the following parts: Yakima JetStream Crossbars - Aluminum - Black - 60"...
  view full answer...
• Parts Needed To Install Roof Rack On a 2023 Toyota Corolla Cross
  Here is a list of the parts needed to install a Yakima JetStream roof rack on your 2023 Toyota Corolla Cross. Yakima JetStream Crossbars - Aluminum - Silver - 50" Long # Y00428 BaseLine Towers for Yakima Crossbars - Naked Roofs # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06154 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06153 You can add the Yakima Same Key System # Y07208 to lock your roof rack to your Toyota. This kit included 8 lock cores, four of...
  view full answer...

Do you have a question about this Roof Rack?