See what our Experts say about this Yakima Roof Rack

• Recommended Yakima Roof Rack Upgrade for Subaru Factory Roof Rack
  The factory roof rack on the 2016 Subaru Outback Wagon has minimal options to fit the factory roof rack which is different than the factory side rails or flush mounted rails. You can use the Landing Pad 15 for Yakima Control Towers - Qty 4 # Y00241 which will allow you to simply remove your factory crossbars and mount these pads in their place. Then you can use the SkyLine Towers for Yakima Crossbars # Y53TR and round bar adapter # Y03536 if you want to use round bars like the 48 inch...
  view full answer...
  
• What is the Best 16 Cubic Foot Or More Cargo Box/Crossbars for My 2018 Nissan Murano SL?
  There are a couple options for a cargo box setup on your 2018 Nissan Murano SL with a bare roof. As far as the box, I recommend the Yakima SkyBox 16 Roof Cargo Box - 16 cu ft # Y95AV or the Yakima SkyBox 21 Rooftop Cargo Box - 21 cu ft # Y07337. The great thing about the SkyBoxes is that they include the SuperLatch system that ensures the lid is latched closed and locked. With this mechanism, the key cannot be removed unless the lid is closed properly. In addition, the SkyBoxes include...
  view full answer...
• Parts Needed to Mount Rhino-Rack Pioneer Platform to Truck Topper with Yakima Tracks
  You need a complete roof rack wtih crossbars to mount the Rhino-Rack Pioneer Platform, part # RR42115BF, on your ARE topper. Since you already have Yakima tracks you can use four of the Control Towers, part # Y8890027, with two sets of Landing Pad 1, part # Y00221. Then choose the round crossbars at the proper length: 48 inches # Y00408 58 inches # Y00409 66 inches # Y00410 78 inches # Y00411 86 inches # Y00420
  view full answer...
• Recommended Yakima Roof Rack for 2007 Honda Accord 4 Door
  For your 2007 Honda Accord you would simply select sedan for the 4 door version. The Yakima system for your vehicle will be the Baseline roof rack. The Q-Tower and Q-Clip fit kits were discontinued a few years back. My recommendation for you consists of the following Yakima parts: JetStream Crossbars - Aluminum - Black - 50" Long # Y00425 BaseLine Towers # Y28TR BaseClip Fit Kit (front) # Y06159 BaseClip Fit Kit (rear) # Y06143 I also recommend adding locks # Y07204
  view full answer...
• Recommended Roof Rack for a 2024 Chevy Equinox w/ Factory Raised Side Rails
  Yes, there absolutely is! I have listed the parts below you will need to add a Yakima roof rack, with round bars, to your 2024 Chevy Equinox with factory raised side rails. Not sure what length of round bars you have so I threw in the ones we have for reference. TimberLine Towers for Yakima Crossbars - Raised, Factory Side Rails - Qty 4 item # Y33TR RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4 item # Y03536 Yakima RoundBar Crossbars - Steel...
  view full answer...
• Roof Rack and Cargo Box Recommendation for 2017 Honda Accord Sedan
  The Yakima roof rack you referenced part numbers # Y00408, # Y28TR, # Y03536, and # Y06148 is a confirmed fit for your 2017 Honda Accord sedan and would be an excellent option for carrying a roof cargo box. Then for a cargo box the Thule Force part # TH6357B would fit this rack and work great. I attached a review video for this box installed on a similar sized vehicle as your Accord sedan. I really like the Thule roof racks and cargo baskets as they are very well made, easy to use, and...
  view full answer...
• Roof Rack Options that Fit 2012 Chrysler 300
  What install video are you referring to? Or what part number?
  view full answer...
• Economically Priced Roof Rack Recommendation for 2019 Toyota Camry with Naked Roof
  While we do have roof racks that fit your 2019 Toyota Camry with a naked roof the Rola you mentioned is not a fit as it fits Honda Civics. Instead the most economically priced rack we have that does fit your vehicle is the Yakima BaseLine roof rack part numbers # Y00408, # Y28TR, # Y03536, and # Y06192. At this time (June 2019) there aren't any Rola roof racks that fit your vehicle.
  view full answer...
• Can Thule Hullavator Install on Yakima Crossbars
  The Thule Hullavator Pro # TH898 can fit round bars by grabbing around the crossbar and can fit aero shaped bars if the bars have a channel on top of them. Which the Yakima aero shaped bars don't have top channels so to go the Yakima route will require round bars which includes the part numbers # Y00408, # Y53TR, # Y03536, and # Y00241 and you'd be set.
  view full answer...
• What Crossbar System Do You Recommend For a Rooftop Tent on My 2021 Subaru Forester?
  For a crossbar system that will be able to accommodate a roof top tent on your 2021 Subaru Forester, I recommend the following parts: - Yakima JetStream Crossbars - Aluminum - Black - 50" # Y00425 - TimberLine Towers for Yakima Crossbars - Raised, Factory Side Rails # Y33TR - (optional for theft-deterrence) Yakima Same-Key Lock Cores # Y07204 With this Yakima crossbar systems, you will be able to accommodate a rooftop tent up to a maximum static weight capacity of 600 pounds. If the...
  view full answer...
• Can I Attach My Yakima OffGrid and High Roller to Rhino-Rack HD Crossbars?
  Since you have Yakima tracks like the # Y01126 installed on your 2014 Ford F-150, a great option is the Rhino-Rack Roof Rack for Thule and Yakima Tracks - 2 Heavy-Duty Crossbars - 65" # Y01-140B-NT. The Rhino-Rack HD crossbars provide you with 220 pounds of maximum weight capacity. There are no other heavy duty crossbar setups that are compatible with the Yakima tracks that have a larger weight capacity (or go over 165 pounds). Even though Yakima cannot confirm for sure, my representative...
  view full answer...
• Removing Yakima BaseLine Roof Rack System From 2016 Honda Civic
  While there are not instructions available for removing the Yakima BaseLine Towers Y00146 from your 2016 Honda Civic I would be happy to walk you through the removal process. This will require the tightening tool that was included with your BaseLine Towers, but if you do not have the tool you can use a long 4mm Hex Wrench. First you are going to want to remove the end cap from the tower, if you have the Yakima SKS lock cores # Y07204 you will need to unlock the cores, or if you have...
  view full answer...
  
• Does Rola Roof Rack R4000 Fit a 2017 GMC Terrain with Naked Roof
  Rola roof rack R4000 actually mounts to side rails on vehicles so if your 2017 GMC Terrain has a naked roof then it will not work. The most cost effective option for models with a naked roof is from Yakima using the following parts: Crossbars # Y00408 BaseLine Towers # Y28TR RoundBar SL Adapter # Y03536 2 of BaseClip fit kit # Y06146
  view full answer...
• Will the Yakima 1A Raingutter Towers Work with the Kwik-Rail Mounting Brackets # Y08002?
  From the looks of your photo, you have the Side Loader Mounting Brackets for Yakima 1A Raingutter Towers # Y08002. I confirmed with my tech at Yakima that the Yakima 1A Raingutter Towers (QTY 4) # Y00101 fit these Kwik-Rail mounts. For theft-deterrence, I recommend the Yakima Same-Key Lock Cores # Y07204. If you need Yakima RoundBars to go with the towers and the brackets, I recommend one of the following crossbar sets: - Round 48" CrossBars for Yakima Roof Rack System # Y00408 - Round...
  view full answer...
  
• Yakima RoundBar Roof Rack Components Needed For A 2022 Kia Telluride
  Hey John, To mount Yakima RoundBars to your Telluride's flush rails you'll need the following components: SightClip Fit Kit # Y34UR SightLine Towers # Y64AR RoundBar SL Adapter # Y03536 Yakima recommends their 48" RoundBar # Y00408 or 50" aero bar for the 2022 Kia Telluride so you'd have quite a bit of overhang if you go with 58" RoundBars # Y00409. Flush rail towers are typically being screwed into fixed mounting points or clamping down into a slot so they actually are a bit more...
  view full answer...
• Can I Mount the Side Loader Mounting Brackets item # Y08002 on a Vertical Surface?
  Yes, they can Eric. The Side Loader Mounting Brackets item # Y08002 are designed to recreate rain gutters like you see on cargo vans. They do not require a specific angle to be functional. What you will want to look at is where you can mount them, and how far apart you need them to mount various items like bike racks, canoes, kayaks, cargo boxes, baskets or any other accessory. These are sold as a pair. Here are the rest of the parts you'll need to complete the roof rack: 1A Raingutter...
  view full answer...
• Round Bar Roof Rack For a 2024 Toyota 4Runner With Raised Factory Rails
  Andrew, we currently only carry round bar crossbars from Yakima. For your 2024 Toyota 4Runner you will need the Towers # Y33TR , RoundBar Adapters # Y03536 and then to select the length of the crossbars you want from the list below. I do see your 4Runner is 75.8" wide not including the side mirrors. 48" RoundBars # Y00408 58" RoundBars # Y00409 66" RoundBars # Y00410 78" RoundBars # Y00411
  view full answer...
• Correct Mounting Components Needed to Mount Yakima RoundBar on a 2024 Toyota RAV4
  William, if you have the round Yakima Roundbars # Y00408, then you will need the RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers # Y03536, the SkyLine Towers for Yakima Crossbars # Y53TR, and the Landing Pad 23 for Yakima SkyLine and Control Towers # Y98FR.
  view full answer...
• Yakima Roof Rack that Fits Leer Truck Topper Tracks
  We have the Yakima roof rack components needed to install in the tracks on top of your Leer 100XR camper shell. To complete your roof rack setup you will need: quantity 2 of the Landing Pad 1 # Y00221 quantity 4 of the Control Towers # Y8890027 and depending on the length of your cap quantity 2 Crossbars like: 48 inch # Y00408 58 inch # Y00409 66 inch # Y00410 78 inch # Y00411 To lock your roof rack to your tracks, I recommend the set of 4 lock cores with keys # Y07204.
  view full answer...
• Loadstop Compatibility With Yakima CoreBar And Universal Mighty Mounts
  Since the Yakima CoreBar # Y00421 does not have a t-slot to accept the standard load stops like # 753-3761, and due to its shape the LoadStop Brackets for Yakima Round Crossbars # Y05000 won't work either, leaving you with no compatible option. In order to use the load stops # Y05000 with your MightyMounts # Y03590, you'd need a different set of crossbars # Y00408 with the adapter # Y03536. I know it's not ideal, but due to the uniqueness of your crossbars that is your best option.
  view full answer...
• What Parts do I Need to Install My Yakima RoundBars on My Truck Topper on My 2021 Toyota Tacoma?
  If you already have Yakima Round Bars like the # Y00408, the parts you need to attach the crossbars to the tracks are 4 of the Replacement Yakima Control Tower for Factory-installed Tracks # Y8890027 and 2 sets of the Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221. For the tracks themselves, they come in 3 different sizes: - Yakima 42" Tracks for Roof Racks # Y01126 - Yakima 54" Tracks for Roof Racks # Y26RR - Yakima 60" Tracks for Roof Racks # Y01135 Since most truck...
  view full answer...
• Roof Rack Solution for Truck Topper Using Artificial Rain Gutters
  The components in the photo you referenced are from Yakima. Yakima's artificial rain gutters are the Side Loader Brackets # Y08002. The roof rack towers for the rain gutter system are the Yakima 1A Raingutter Towers # Y00101, which come in a quantity of 4. These towers are designed for use with the Yakima RoundBar crossbars. Yakima crossbars come in a variety of lengths. Depending on how much overhang of the crossbar you want, the Round 58 Inch Crossbars for Yakima Roof Rack Systems...
  view full answer...
  
• Alternate Mounting Hardware for Yakima SpaceBooster Cargo Box on 2015 Subaru Outback Wagon
  It is not a huge deal to add a few new mounting holes to the bottom of an ABS plastic cargo box like the Yakima SpaceBooster. A cordless drill and appropriately-sized drill bit will make short work of it. I would avoid using a heated implement for making the holes since it could be a bit messy and could make it harder to control the size of the hole. The things to keep in mind are that you want to drill no more additional holes than absolutely necessary so measure, check and re-check....
  view full answer...
• Yakima Roof Rack that Fits Roof Tracks on Leer Truck Canopy
  I spoke to my Yakima contact and he informed me that you will need the Landing Pad 1 # Y00221 for the tracks on your Leer camper. To complete your roof rack setup you will need: quantity 2 of the Landing Pad 1 # Y00221 quantity 4 of the Control Towers # Y8890027 and depending on the length of your cap quantity 2 Crossbars like: 48 inch # Y00408 58 inch # Y00409 66 inch # Y00410 78 inch # Y00411 To lock your roof rack to your tracks, I recommend the set of 4 lock cores with keys # Y07204.
  view full answer...
• Recommended Fairing for Rola Roof rack on a 2009 Honda Accord Sedan
  Yes! Out of the variety of fairings that we have to offer I recommend the 40" long Inno Fairing # INA261 because it will fit perfectly with the 38" long Rola Sport Series Roof Rack # 59757 for your 2009 Honda Accord. If you let me know what you are wanting to use the roof rack for I can make additional recommendations for you. I have also attached an installation video and a picture of this roof rack on a 2009 Accord Sedan that you can reference.
  view full answer...
  
• Roof Rack and Ski Carrier to Fit 2019 Hyundai Santa Fe with Naked Roof
  Yakima has a really great roof rack for your 2019 Hyundai Santa Fe with a naked roof with the Baseline JetStream bar rack part numbers # Y28TR, # Y06151, # Y06154, and # Y00425 (see attached picture). This will give you an extremely high quality roof rack that has aero bars which will give you minimal wind noise. Then for a ski rack we have the FatCat EVO part # Y03096 which will hold 6 skis or part # Y03095 for up to 4. I attached a review video for this carrier for you to check out as well.
  view full answer...
  
• Kayak Rack and Load Assist for a 2018 Toyota Prius Prime Without Glass Roof
  Hey, Nick! Happy to help out. The best and easiest kayak rack to use with a load assist is the Thule Hullavator Pro # TH898. One big advantage is that everything is built into the carrier itself, here are no extra parts to remove or store. Personally, I’m not a fan of other load-assist options like the Malone DownLoader # MPG114MD-351XL, since you have to store the Telos legs inside your vehicle while traveling. That’s especially inconvenient if you’re working with a smaller vehicle. I...
  view full answer...
• Recommended Roof Rack and Bike Rack for a 2016 Lexus GSF
  The best option to transport a bike with your 2016 Lexus GSF is going to be to install a roof rack and attach a bike rack. The trunk mounted ones like item # SA805BL have mixed results and won't work with cars with spoilers. It doesn't look like your Lexus has any rails so to add a roof rack you will need the following parts: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip...
  view full answer...
• Roof Rack With Longer Crossbars For 2023 Kia Sorento With Naked Roof
  Hello Katherine, thanks for reaching out. Yes, we do have a product that will work for you! The best option for this will be to go with a Yakima JetStream roof rack. The design of their bars and towers allows for longer than standard crossbars, so we can set you up with something longer. For the Yakima bars, a 60" crossbar will be the closest option for something longer than 56". Here are the parts you will need for the complete roof rack system: - Yakima JetStream Crossbars - Aluminum...
  view full answer...
• Recommended Way to Carry a Kayak for a Ford F-150
  As long as you have a 2 inch receiver on your 2016 Ford F-150, I recommend the Rhino-Rack # RTL002. This is one of our better options for kayak carriers and installs directly into your hitch. In addition to this carrier I recommend using a roof rack to secure your kayak to the roof of your truck instead of the foam blocks. If you have the SuperCrew Cab, the Rhino Rack Aero Bar Roof Rack kit is a great option. This include the Crossbars # RRVA150S-2, the Legs # RRRLKVA, and the Fit Kit...
  view full answer...
• How Can I Tell if I have Fixed Mounting Points on My 2015 Mazda CX-5 for a Crossbar System?
  According to the specs I have, you may have fixed mounting points on those rubber strips on your 2015 Mazda CX-5. The way you can tell is if there is a small removable tab on those rails that cover the holes. I went ahead and attached a video of a 2015 Mazda CX-5 with fixed mounting points to give you perspective about what to look for. If you determine that you have fixed mounting points, I recommend the following setup: - Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 46" #...
  view full answer...
• How to Tell if Thule Hullavator Kayak Carrier Will Fit on a Tesla Model 3
  Both the current Hullavator Pro # TH898 and the older model, part 897XT that you have, require the crossbars to overhang the feet of the roof rack by 4" - 8" for their to be enough clearance to lower the carrier without making contact with any given vehicle. If you're Tesla Model 3 crossbars have a T-Slot, you still have the T-Slot mounting hardware, and the crossbars can achieve an overhang then you'll be good to go. The nice thing is that you already have this discontinued carrier so...
  view full answer...
• Roof Rack Fit on 2012 Toyota Venza With Panoramic Sunroof
  There is one roof rack that is a confirmed fit for your 2012 Toyota Venza with a panoramic sunroof, though the sunroof should not be opened with the rack on. There isn't a roof rack available for your Venza that is going to allow normal use of the sunroof when the rack is on, but you can remove the rack if you like when you aren't using it in order to utilize the sunroof. The roof rack that fits your '12 Venza with a panoramic roof is an exceptionally nice one from Yakima, and consists...
  view full answer...
• Will the Thule Force XT L Fit My 2020 BMW X5?
  Yes, you will be able to fit the Thule Force XT L # TH6357B on your 2020 BMW X5's roof. Not only do you have enough roof for the required crossbar spread of 23-5/8 - 33 inches, you will also be able to mount the box to your roof and fully open your rear hatch. If you are wanting to go bigger, the Thule Force XT XL # TH6358B and XXL # TH6359B will fit as well. As far as mounting, you will need a crossbar system in order to secure the Force XT XXL to your roof. The setup you need depends...
  view full answer...
• Should Rear Bar Sit Higher Than Front Bar on Yakima Roof Rack System for 2017 Honda Pilot
  The front and rear Yakima JetStream Crossbars like # Y00426 should be level to each other on your 2017 Honda Pilot. Looking through the installation instructions for the BaseLine Towers # Y28TR and Fit Kit # Y00146 for your Honda Pilot, it does appear that the feet are positioned onto contours that are on the vehicle's roof. To compensate for this and to make sure the front and rear bars are not mounted at different heights, the pitch setting on the Yakima Feet need to be adjusted. I recommend...
  view full answer...
  
• What is the Best 16 Cubic Foot Or More Cargo Box/Crossbars for My 2018 Nissan Murano SL?
  There are a couple options for a cargo box setup on your 2018 Nissan Murano SL with a bare roof. As far as the box, I recommend the Yakima SkyBox 16 Roof Cargo Box - 16 cu ft # Y95AV or the Yakima SkyBox 21 Rooftop Cargo Box - 21 cu ft # Y07337. The great thing about the SkyBoxes is that they include the SuperLatch system that ensures the lid is latched closed and locked. With this mechanism, the key cannot be removed unless the lid is closed properly. In addition, the SkyBoxes include...
  view full answer...
• Recommended Roof Rack for Fiat 500x With Panoramic Glass Sunroof
  There is a roof rack that will fit your 2016 Fiat 500X that has the panoramic sunroof, the Inno Aero. This rack is made up of Aero Crossbars # INXB100-108, Flush Feet for Aero Crossbars # INXS200, and Custom Fit Kit # INK482. This rack has a 100 lbs weight capacity though I do recommend checking your Fiat's manual to confirm what the actual capacity is. The aero crossbars are going to give you a quiet ride and they also have integrated T-slots so you can carry accessories that way. I've...
  view full answer...
  
• Square Bar Roof Rack that Fits 2020 Ram 1500 Quad Cab
  Thule offers a square bar roof rack that fits your 2020 Ram 1500 quad cab with the part # TH712500, # TH710501, and # TH145199. Then for a square bar roof rack the Thule Portage part # TH819 would work great.
  view full answer...
• What is Needed to Attach Yakima JetStream Crossbars to 2017 Honda CR-V With Bare Roof
  Hello Zeke, So we can get your 2017 Honda CR-V set up to mount Yakima JetStream Crossbars # Y00425, though there aren't actually different options for this. Reason for that is you can't mix and match different manufacturers parts because they won't fit together. That means to put the JetStream crossbars on the bare roof of your 2017 Honda CR-V you would have to use the following parts: - BaseLine Towers for Yakima Crossbars - Naked Roofs # Y28TR - BaseClip Fit Kit # Y06188 - BaseClip...
  view full answer...
• Compatibility of 3 Bike Rack on 2015 Toyota Prius
  The Reese Q-Slot Platform-Style 2 Bike Rack is a fit for your 2015 Prius but has been discontinued. If you already have the rack it will work very well for you. I recommend using the included pin and clip for a secure fit in the hitch and then using a cable lock like # e98891 to secure your bikes to the rack. The 2 inch receiver only Reese Q-Slot Platform-Style 2 Bike and 4 Bike Rack PS63138 (also discontinued) was a 2 or 4 bike carrier, but would NOT work on your 2015 Toyota Prius...
  view full answer...
• Roof Rack and Board Carrier Recommendation for 2016 Toyota Prius V with Glass Roof
  For your 2016 Toyota Prius V you will need to install a roof rack to carry the boards you mentioned. Unfortunately only Yakima makes roof racks for your vehicle and they aren't exactly super cheap. So for that you would want the Yakima CoreBar part numbers # Y00425, # Y28TR, # Y06117, # Y06174. Which with that you'd be able to use the LockRack kpart # LR59FR that you referenced. This will attach to the crossbar by the top channel.
  view full answer...
• Roof Rack And Bed Cover Recommendation For 2024 Ram 2500 Big Horn Crew Cab
  Hello Nancy, thanks for reaching out. We do have roof rack options for your 2024 Ram 2500 big horn crew cab, but sadly we do not have a fit for the Thule wingbars, so you will need to go with something different. For that I recommend going with a Yakima JetStream roof rack. The JetStream aero bars will work great with your Hullavator so here is what I recommend: - BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers...
  view full answer...
• Roof Rack Fit on 2018 Dodge Durango With Sunroof & Naked Roof
  There is an option for a roof rack that will fit your 2018 Dodge Durango that has a sunroof & naked roof (which simply means no rails on top). The one that will fit is from Yakima and is made up of a few different parts: - Yakima JetStream Crossbars # Y00426 - BaseLine Towers for Yakima Crossbars # Y28TR - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06180 Not only is this Yakima rack a fit for your '18 Durango, but it will also give you the best roof rack you can get for...
  view full answer...
• Recommended Yakima Roof Rack for 2007 Honda Accord 4 Door
  For your 2007 Honda Accord you would simply select sedan for the 4 door version. The Yakima system for your vehicle will be the Baseline roof rack. The Q-Tower and Q-Clip fit kits were discontinued a few years back. My recommendation for you consists of the following Yakima parts: JetStream Crossbars - Aluminum - Black - 50" Long # Y00425 BaseLine Towers # Y28TR BaseClip Fit Kit (front) # Y06159 BaseClip Fit Kit (rear) # Y06143 I also recommend adding locks # Y07204
  view full answer...
• Naked Roof Rack Recommendation for 2013 Honda CRV to Carry Longer Roof Box for Skis
  The naked roof racks that fit your 2013 Honda CR-V do put the front bar significantly closer to the windsheild like with the Rhino Rack part # RRVA137B-2, # RRRLKVA, and # DK284 we have installed on a 2013 CR-V so this would be the way to go. I attached a picture that shows the front bar is more than the amount of inches forward that you would need plus an install video on a similar 2014 CR-V as well.
  view full answer...
  
• Recommended Roof Rack for 2013 Toyota Venza with Panoramic Glass Roof
  I do have a solution for you, however the Rhino-Rack roof rack that you referenced will not fit your 2013 Toyota Venza if it's equipped with the panoramic glass roof. None of the solutions from Rhino-Rack are compatible with the panoramic roof on your vehicle. I checked with Yakima though and they do state that their JetStream Crossbar system is compatible with the glass roof and will work great on your Venza. This roof rack consists of # Y00426 for the two 60 inch JetStream Crossbars,...
  view full answer...
• Recommended Roof Rack for a 2022 Honda Insight
  Hey Andy! The 50" crossbars on the Yakima BaseLine Roof Rack Kit item # Y88UB can be swapped out but the next largest size is the 60" Long item # Y00429 so I do not think that's going to be a viable option. By law the crossbars are not supposed to stick out past the rear view mirrors. If you want to pursue this option you'll need the following parts: BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item...
  view full answer...
• Is There A Trailer Hitch Available For A 2019 Honda Civic Sedan With A Center Exhaust
  Hi Hamza, Honda Civic models with a center exhaust unfortunately prevent the installation of a trailer hitch so the only way to haul your bike(s) would be to use a trunk mounted bike rack or roof rack mounted bike rack. If you'd prefer a trunk mounted bike rack then I recommend the Yakima FullBack 2 Bike Rack # Y02634. If you want to go with a roof rack mounted back rack and don't currently have a roof rack then you'll need the following components: Yakima JetStream Crossbars # Y00425 BaseLine...
  view full answer...
• Recommended Fairing for Rola Roof rack on a 2009 Honda Accord Sedan
  Yes! Out of the variety of fairings that we have to offer I recommend the 40" long Inno Fairing # INA261 because it will fit perfectly with the 38" long Rola Sport Series Roof Rack # 59757 for your 2009 Honda Accord. If you let me know what you are wanting to use the roof rack for I can make additional recommendations for you. I have also attached an installation video and a picture of this roof rack on a 2009 Accord Sedan that you can reference.
  view full answer...
  
• Recommended Yakima Roof Rack Upgrade for Subaru Factory Roof Rack
  The factory roof rack on the 2016 Subaru Outback Wagon has minimal options to fit the factory roof rack which is different than the factory side rails or flush mounted rails. You can use the Landing Pad 15 for Yakima Control Towers - Qty 4 # Y00241 which will allow you to simply remove your factory crossbars and mount these pads in their place. Then you can use the SkyLine Towers for Yakima Crossbars # Y53TR and round bar adapter # Y03536 if you want to use round bars like the 48 inch...
  view full answer...
  
• Towers for Yakima RoundBar on 2024 Honda CR-V Hybrid
  There are towers available that will allow you to install your Yakima RoundBars on your 2024 CR-V Hybrid. You will need the following: -SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 # Y64AR -RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4 # Y03536 -SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers # Y44UR If you have Yakima Same Key System locks you can transfer them over or you can add new locks using...
  view full answer...
• How to Carry Two Canoes on Roof of 2019 Honda Passport with Factory Crossbars
  Your best option is to use the Thule Compass Watersport Carrier # TH890000. The Compass is compatible with round, square, aero, elliptical, and most factory crossbars, including the ones on your 2019 Honda Passport. It can easily accommodate your two canoes, as long as their combined weight is not over 130 lbs, and they are not more than 36 inches wide (at their widest point). The Compass will allow you to carry your two canoes in a vertical (post-style) position so you have one on each...
  view full answer...
  
• Will the Thule Force XT L Fit My 2020 BMW X5?
  Yes, you will be able to fit the Thule Force XT L # TH6357B on your 2020 BMW X5's roof. Not only do you have enough roof for the required crossbar spread of 23-5/8 - 33 inches, you will also be able to mount the box to your roof and fully open your rear hatch. If you are wanting to go bigger, the Thule Force XT XL # TH6358B and XXL # TH6359B will fit as well. As far as mounting, you will need a crossbar system in order to secure the Force XT XXL to your roof. The setup you need depends...
  view full answer...
• What is the Best 16 Cubic Foot Or More Cargo Box/Crossbars for My 2018 Nissan Murano SL?
  There are a couple options for a cargo box setup on your 2018 Nissan Murano SL with a bare roof. As far as the box, I recommend the Yakima SkyBox 16 Roof Cargo Box - 16 cu ft # Y95AV or the Yakima SkyBox 21 Rooftop Cargo Box - 21 cu ft # Y07337. The great thing about the SkyBoxes is that they include the SuperLatch system that ensures the lid is latched closed and locked. With this mechanism, the key cannot be removed unless the lid is closed properly. In addition, the SkyBoxes include...
  view full answer...
• Will Thule Hullavator Fit a Yakima Roof Rack on a 2018 Subaru Outback
  The Thule Hullavator, # TH898, will fit on a Yakima roof rack so if you like the spacing and looks of the Yakima racks you can certainly go that route for your 2018 Subaru Outback. With the Hullavator the roof rack crossbars need to stick out past the mounting feet by at least 4 inches. What this means you will need to use longer bars than what would normally be recommended for the vehicle. If you go with a round bar system then you will need the following parts: Crossbars # Y00409 SkyLine...
  view full answer...
• Recommended Yakima Roof Rack for 2007 Honda Accord 4 Door
  For your 2007 Honda Accord you would simply select sedan for the 4 door version. The Yakima system for your vehicle will be the Baseline roof rack. The Q-Tower and Q-Clip fit kits were discontinued a few years back. My recommendation for you consists of the following Yakima parts: JetStream Crossbars - Aluminum - Black - 50" Long # Y00425 BaseLine Towers # Y28TR BaseClip Fit Kit (front) # Y06159 BaseClip Fit Kit (rear) # Y06143 I also recommend adding locks # Y07204
  view full answer...
• Yakima Roof Rack Components Needed to Install Roof Rack in Camper Top Channel
  The landing pad you would need is part # Y00221 which will fit your roof rack channels. For towers you need two of the part # Y00152 and a round bar adapter part # Y03536. For 58 inch crossbars you would want part # Y00409. For 78 inch long you'd want the part # Y00411.
  view full answer...
  
• Hitch, Bike Rack, Roof Rack, Kayak Carrier for 2022 Toyota Highlander LE
  The Curt hitch part # C99FR is a really great option for a trailer hitch for a bike rack and would be what I would recommend as the best. It's mostly hidden and has great towing capacities plus is made in the USA. The best bike rack for you will be the best one that fits your needs. Most people prefer the platform style bike racks as they are the easiest to load and carry the bikes in the most stable way. So one of my favorites is the Thule EasyFold XT part # TH903202 which is lighter...
  view full answer...
• Does Malone Square Bar Roof Rack # MPG203 Fit 2019 Toyota 4Runner
  Yes the Malone SteelTop roof rack part number # MPG203 would fit and work great on the roof of your 2019 Toyota 4Runner with raised rails.
  view full answer...
• Yakima Round Bar Roof Rack Components to Install Round Bars 2015 Toyota Sienna
  Hey Jim, the best alternative to the mounting hardware you have now would be the current Yakima roof rack components that they list for installing the round bars on your 2015 Toyota Sienna which is their Timberline kit that consists of part numbers # Y33TR and # Y03536. How do you like the longer crossbars?
  view full answer...
• Parts Needed to Install Round Yakima Crossbar Roof Rack on 2020 Toyota Highlander
  Hey Michael, it sounds like you have a set of round Yakima crossbars (among other things) that you'd like to reuse on your 2020 Toyota Highlander that has factory fixed mounting points. For that the complete rack with everything including the bars would normally be the part # Y63FB but since you have the bars already what you'd want is the part numbers # Y53TR, # Y46VR, and # Y03536 which is everything you'd need minus crossbars. If you have a different setup currently let me know and...
  view full answer...
• Recommended Roof Rack for a 2024 Chevy Equinox w/ Factory Raised Side Rails
  Yes, there absolutely is! I have listed the parts below you will need to add a Yakima roof rack, with round bars, to your 2024 Chevy Equinox with factory raised side rails. Not sure what length of round bars you have so I threw in the ones we have for reference. TimberLine Towers for Yakima Crossbars - Raised, Factory Side Rails - Qty 4 item # Y33TR RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4 item # Y03536 Yakima RoundBar Crossbars - Steel...
  view full answer...
• Roof Rack and Cargo Box Recommendation for 2017 Honda Accord Sedan
  The Yakima roof rack you referenced part numbers # Y00408, # Y28TR, # Y03536, and # Y06148 is a confirmed fit for your 2017 Honda Accord sedan and would be an excellent option for carrying a roof cargo box. Then for a cargo box the Thule Force part # TH6357B would fit this rack and work great. I attached a review video for this box installed on a similar sized vehicle as your Accord sedan. I really like the Thule roof racks and cargo baskets as they are very well made, easy to use, and...
  view full answer...
• Roof Rack Options that Fit 2012 Chrysler 300
  What install video are you referring to? Or what part number?
  view full answer...
• Economically Priced Roof Rack Recommendation for 2019 Toyota Camry with Naked Roof
  While we do have roof racks that fit your 2019 Toyota Camry with a naked roof the Rola you mentioned is not a fit as it fits Honda Civics. Instead the most economically priced rack we have that does fit your vehicle is the Yakima BaseLine roof rack part numbers # Y00408, # Y28TR, # Y03536, and # Y06192. At this time (June 2019) there aren't any Rola roof racks that fit your vehicle.
  view full answer...
• Can The Towers And Fit Kit For The Yakima SkyLine Roof Rack Y93FB Be Purchased Separately?
  Hi Joel! You can indeed purchase the towers and fit kit without the bars from the Yakima SkyLine Roof Rack for Fixed Mounting Points - RoundBar Crossbars - Steel - Black - Qty 2 # Y93FB for your 2020 Subaru WRX. I have those two parts listed below: SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems - Qty 4 # Y53TR Landing Pad 22 for Yakima SkyLine and Control Towers - Qty 4 # Y00248 RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine,...
  view full answer...
• Can Thule Hullavator Install on Yakima Crossbars
  The Thule Hullavator Pro # TH898 can fit round bars by grabbing around the crossbar and can fit aero shaped bars if the bars have a channel on top of them. Which the Yakima aero shaped bars don't have top channels so to go the Yakima route will require round bars which includes the part numbers # Y00408, # Y53TR, # Y03536, and # Y00241 and you'd be set.
  view full answer...
• How to Get 58 Inch Yakima Round Crossbars For 2021 Toyota Corolla Hatchback
  Hey Roy, So to get the 58 inch Yakima round crossbars instead of the 48 inch it's pretty simple, you'll just need to order the parts separately. Here's exactly what you'll need for your 2021 Toyota Corolla Hatchback: - Yakima RoundBar Crossbars - Steel - Black - 58" Long # Y00409 - BaseLine Towers for Yakima Crossbars # Y28TR - BaseClip Fit Kit # Y06129 - BaseClip Fit Kit # Y06131 - RoundBar SL Adapter # Y03536
  view full answer...
• Recommended Yakima Roof Rack for My 2010 Hyundai Genesis Coupe
  While we do have a great Yakima crossbar system that is confirmed to fit your 2010 Hyundai Genesis Coupe, Rhino-Rack does not have a roof rack option that fits your vehicle. With that being said, I saw that you were looking at the Yakima round crossbar system that includes the 58" Crossbars # Y00409. In order to have a complete setup with these crossbars that fit your roof, you also need the following parts: - RoundBar End Caps # Y8007026 - BaseLine Towers # Y28TR - RoundBar SL Adapters...
  view full answer...
• Will Installing Track Roof Rack System on A.R.E. Topper Void Warranty
  Installing a track system roof rack like the Yakima parts # Y01126, # Y00221, # Y8890027, and # Y00410 won't void the warranty for your pickup but from what I could find it looks like modifying your A.R.E. topper will void that warranty. Since we aren't an A.R.E. dealer I can't really confirm this, but from my research it is very likely that your warranty will be void. So you can have the track system professionally installed but that would be your choice whether you want to pursue this...
  view full answer...
  
• Recommended Thule Aeroblade Roof Rack Recommendation for 2018 Toyota Tacoma
  47 inch long Thule aero bars would be too short to be used on your 2018 Toyota Tacoma. Thule recommends a 53 inch bar like the part # TH711400 with the feet part # TH710501 and the fit kit # TH145107.
  view full answer...
• Recommended Roof Rack to Carry 2 Kayaks on 2014 Ford Focus
  We carry many roof rack and kayak carrier options for your 2014 Ford Focus. The roof rack that I recommend is the Yakima Q Tower roof rack that includes two 58 inch crossbars, # Y00409, the BaseLine Towers # Y28TR, RoundBar Adapters # Y03536, and BaseClips # Y06135 and # Y06105. This will provide you with two crossbars to mount your kayak carrier to. You can mount your kayak directly to the crossbars, but to prevent scratching your kayak, I recommend using kayak carriers like the Yakima...
  view full answer...
• Roof Rack Recommendation for a 2013 Hyundai Sonata Hybrid with Panoramic Roof
  The roof rack I recommend for your 2013 Hyundai Sonata Hybrid is the Yakima JetStream which includes the following parts: - 50" JetStream Crossbars # Y00425 - BaseLine Towers # Y28TR - BaseClip Fit Kits # Y06144 and # Y06153 - Lock Core Kit # Y07204 This has been confirmed by Yakima to fit with the larger panoramic roof you have, and we actually shot an install video of this exact roof rack on a 2011 Sonata that I'm linking for you to reference. If you let me know what you plan on...
  view full answer...
• Is There A Better Roof Rack Solution For A 2011 Toyota Corolla Than My Yakima Q-Towers
  The aftermarket roof tracks, such as the Rhino-Rack RT-Style Roof Rack Tracks - Rivet Mount - 39-3/16" Long - Qty 2, part # RRRTS534, are not test fit for vehicles. The rack manufacturers recommend that you to a garage that specializes in aftermarket body work to do the installation. It will be up to the shop you take your 2011 Toyota Corolla to determine whether or not the Rhino-Rack RT Style Roof Rack will fit your vehicle. If you get the OK for the Rhino Rack tracks you will need these...
  view full answer...
• Fit and Compatibility of Roof Rack for SportRack Vista XL Cargo Box on a 2013 Toyota Corolla
  I have a solution for you but the Sport Rack # SR1002, which is a confirmed fit for your 2013 Toyota Corolla 4-door, won't allow you to use your SportRack Vista XL Cargo Box # SR7018 because the crossbar spread isn't long enough. Instead I recommend the custom fit Yakima BaseLine Roof Rack which will give you a crossbar spread of 30 inches and the SportRack Vista XL will be able to accommodate. The Yakima roof rack kit is made up of the following parts: Round 48" CrossBars # Y00408 BaseLine...
  view full answer...
  
• Is There A Thule Roof Rack Fit Kit Available For A 2004 Toyota Camry
  Thule no longer offers a fit kit for a 2004 Toyota Camry so the only option available would be to get an entirely new roof rack system. The only confirmed fits that we currently offer are from Yakima so I have the following component recommendations: Yakima CoreBar Crossbars - Steel - Black - 60" Long - Qty 2 # Y00422 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06121 (front) BaseClip Fit Kit for Yakima...
  view full answer...
• Yakima Roof Rack Recommendation for a 2012 Hyundai Sonata
  The only option for installing a Yakima roof rack on your 2012 Hyundai Sonata will be to use the door clamp setup as there isn't a gutter or fixed mounting point option available. You would need the following to complete the rack: Round 58" CrossBars for Yakima Roof Rack System # Y00409 BaseLine Towers for Yakima Crossbars # Y28TR RoundBar SL Adapter # Y03536 BaseClip Fit Kit # Y06144 BaseClip Fit Kit # Y06153
  view full answer...
• Roof Rack Kit for a 2009 Honda Fit, 2003 Toyota Camry and a 2015 Nissan Sentra
  Though I strongly recommend buying an individual rack for each vehicle, you can build a modular Yakima kit for your three vehicles. I'm recommending Yakima because their crossbars have a full channel on the underside of the bar, letting them be fit to multiple vehicles without needing separate bars. The Toyota Camry requires the longest bar, so you'll fit this bar to the other vehicles. To do this, you'll need the following parts for all three vehicles: Yakima JetStream bar, 60 inches,...
  view full answer...
• How To Use Yakima Round Crossbars on a 2011 Toyota Corolla
  In order to use Yakima Round Crossbars like part # Y00408 on a 2011 Toyota Corolla you'll need the following: Yakima BaseLine Towers part # Y28TR Yakima Round Bar Adapters part # Y03536 Yakima BaseClip Fit Kit part # Y06144 Yakima BaseClip Fit Kit part # Y06153
  view full answer...
• Availability of BaseClip Fit Kit for Yakima Roof Rack 144 b57-5 and 153 b73-5
  The first part number you mentioned is our part # Y06144 and the second is # Y06153.
  view full answer...
• Roof Rack For 2006 Toyota Camry That Is Compatible With Rhino-Rack Kayak Carrier S512
  The Yakima roof rack that fits your 2006 Toyota Camry naked roof is as follows: -Round Crossbars # Y00409 -Towers # Y28TR -Round Bar Adapters # Y03536 -Fit Kits # Y06121 AND # Y06144 Then you can install the Rhino Rack Carrier # s512 or many other accessories.
  view full answer...
• Compatibility of Yakima Roof Rack System with Dual Sun Roof on 2012 Hyundai Sonata
  According to our friends at Yakima, they offer a roof rack system compatible with your vehicle that can be constructed using the following parts: Round 58 inch CrossBars, part # Y00409 BaseLine Towers, part # Y28TR Round Bar SL Adapter, part # Y03536 BaseClip Fit Kit, part # Y06144 BaseClip Fit Kit, part # Y06153 The towers will sit just above the doors, and will be located to the outside of the roof edge molding. Therefore, they will come into contact with the metal portion of the roof,...
  view full answer...
• Recommendation To Carry Skis and Snowboards on the Roof of 2013 Toyota Corolla
  For your Corolla with a naked roof I recommend the Yakima BaseLine Tower Roof Rack System which would be the Towrs, part # Y28TR, Adapters, part # Y03536, the BaseClips, parts # Y06144 and # Y06153, and the Crossbars, part # Y00408. These parts give you a roof rack with cross bars on the roof of your vehicle. I am including a link to a video review on the Yakima roof rack system. With the roof rack installed you will then be able to use the Yakima FatCat EVO 6 Ski and Snowboard Carrier,...
  view full answer...
• Will The 50 Yakima JetStream Cross Bars Fit 2011 Hyundai Sonata
  Yes, you can use the 50" crossbars. The kit you will want to purchase is listed below. Yakima JetStream Crossbars Black Aluminum 50" Long Part # Y00425 BaseLine Towers for Yakima Crossbars w/ Naked Roofs Part # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers Part # Y06144 BaseClips and Pads for Yakima Base Line Towers Part # Y06153 This is the entire part list needed to make your kit compatible for your 2011 Hyundai Sonata with the 50" bars you are looking for. I have also...
  view full answer...
• Roof Rack With Longer Crossbars For 2023 Kia Sorento With Naked Roof
  Hello Katherine, thanks for reaching out. Yes, we do have a product that will work for you! The best option for this will be to go with a Yakima JetStream roof rack. The design of their bars and towers allows for longer than standard crossbars, so we can set you up with something longer. For the Yakima bars, a 60" crossbar will be the closest option for something longer than 56". Here are the parts you will need for the complete roof rack system: - Yakima JetStream Crossbars - Aluminum...
  view full answer...
• Hitch, Bike Rack, Roof Rack, Kayak Carrier for 2022 Toyota Highlander LE
  The Curt hitch part # C99FR is a really great option for a trailer hitch for a bike rack and would be what I would recommend as the best. It's mostly hidden and has great towing capacities plus is made in the USA. The best bike rack for you will be the best one that fits your needs. Most people prefer the platform style bike racks as they are the easiest to load and carry the bikes in the most stable way. So one of my favorites is the Thule EasyFold XT part # TH903202 which is lighter...
  view full answer...
• Will a Yakima Roof Rack System Fit My 2020 Toyota Highlander LE?
  I confirmed with Yakima that mounting points that are on your bare roof of your 2020 Toyota Highlander will fit a roof rack system. After you pop off the tab that covers the mounting points, there is a screw that you will use to attach a roof rack system. I went ahead and attached a video that shows how you would attach a Yakima roof rack system on the 2020 Toyota Highlander. For the parts you need for that setup, you will need the following parts: - Yakima JetStream Crossbars - Aluminum...
  view full answer...
• What do I need to setup a Thule Hullavator on Yakima JetStream Crossbars on a 26 Toyota Highlander?
  Great choice Peter, that combo works very well together! Since you already have 60" Yakima JetStream crossbars # Y00428 and a Thule Hullavator # TH898 , you’re most of the way there. The key now is just getting the correct tower and fit kit for your 2026 Highlander roof type. If the Highlander has "Flush Rails" this is the correct fit kit # Y53TR Yakima SkyLine Roof Rack Towers for JetStream Crossbars - Qty 4 # Y66VR Yakima Landing Pad 28 If the Highlander has "No Rails" this is the...
  view full answer...
• Roof Rack Kit For Carrying A Thule Hullavator On A 2024 Toyota Corolla Cross
  Hi Jennifer! You want 4" to 8" of crossbar after the tower in order for a Thule Hullavator # TH898 to not make contact with the vehicle when in the lowered position. Since you mentioned the roof on your 2024 Toyota Corolla Cross being narrow compared to the body, I would recommend going as wide as you can, just to be sure. With that said, I have 70" crossbar options listed below. You didn't mention if your Corolla Cross had flush mounted rails running from the front to the back or if you...
  view full answer...
• Recommended Roof Rack for a 2023 Kia Sorento w/ a Naked Roof
  To attach a roof rack to your 2023 Kia Sorento, with no roof rails, you will want the roof rack by Yakima and it includes the following parts: Yakima HD Crossbars - Aluminum - Black - 55" Long - Qty 2 item # Y01156 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR HD Bar SL Adapter for Yakima BaseLine,Towers - Qty 4 item # Y03541 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06175 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers -...
  view full answer...
  
• Will the Thule Hullavator Fit on Yakima Jetstream Crossbars on a 2021 Toyota Highlander
  The Thule Hullavator # TH898 will fit on the Yakima Jetstream bars without any issues and I do recommend going with the 60" bars just to ensure that you've got the needed clearance to use the Hullavator's lift assist system. If you've got a naked roof you'll want the Yakima roof rack system that uses parts # Y00426, # Y28TR, # Y06153 and # Y06132. If you've got the flush mounted rails you'll want to use # Y00426 for the bars still but use the # Y53TR and # Y66VR for the towers and landing...
  view full answer...
• Recommended Roof Rack for 2020 Chevy Traverse Without Side Rails
  For your 2020 Chevy Traverse, if you don't have the factory installed raised side rails, then you absolutely can still add a roof rack but it will use a custom fit kit. My recommendation for a naked roof is: Yakima JetStream Crossbars # Y00426 BaseLine Towers # Y28TR BaseClip Fit Kit # Y06153 There is not a rail system to add to your roof, so this is the best option and is rated for 165 lbs.
  view full answer...
• Will the Thule Force XT XL Rooftop Cargo Box Fit a 2021 Toyota Highlander
  In order to use a cargo box on a 2021 Toyota Highlander you'll first need a roof rack like the Yakima JetStream Crossbar System composed of part # Y00426, part # Y28TR, part # Y06153, and part # Y06132. This will then allow you to mount a cargo box like the Thule Force XT XL Rooftop Cargo Box part # TH6358B. The Force XT XL will be a great size for the Highlander. This is a larger SUV so you can get away with a larger box. It will indeed cover the moonroof but you wouldn't want to open...
  view full answer...
• Recommended Roof Rack and Kayak Carrier For 2022 Toyota Highlander With Bare Roof
  We sure do! For your 2022 Toyota Highlander I recommend the Yakima Roof Rack System which uses 60" Yakima JetStream Crossbars in Black # Y00426, Yakima Base Line Towers # Y28TR, BaseClip Fit Kit # Y06153, and BaseClip Fit Kit # Y06132. I do also recommend adding the Yakima Same Key System Lock Cores # Y07204 to the towers to keep them secured to the roof of your Highlander. This system will give you 60" of useable crossbar space with a 165lb weight capacity which will be perfect for a...
  view full answer...
• Best Roof Rack For 2025 Toyota Corolla Cross WIth Bare Roof
  The best roof rack for your 2024 Toyota Corolla Cross with a bare roof is from Yakima, and consists of the following part numbers: - Yakima JetStream Crossbars - Silver # Y00428 or Black # Y00425 - BaseLine Towers # Y28TR - BaseClip Fit Kit # Y06153 - BaseClip Fit Kit # Y06154 I really like the Yakima brand due to how quiet the bars are; they have what are called "WindRidges" on top that control the flow of the air both over and under the bar, which minimizes both vibration of the...
  view full answer...
• Roof Rack Recommendation for a 2013 Hyundai Sonata Hybrid with Panoramic Roof
  The roof rack I recommend for your 2013 Hyundai Sonata Hybrid is the Yakima JetStream which includes the following parts: - 50" JetStream Crossbars # Y00425 - BaseLine Towers # Y28TR - BaseClip Fit Kits # Y06144 and # Y06153 - Lock Core Kit # Y07204 This has been confirmed by Yakima to fit with the larger panoramic roof you have, and we actually shot an install video of this exact roof rack on a 2011 Sonata that I'm linking for you to reference. If you let me know what you plan on...
  view full answer...
• Roof Rack Recommendation for a 2019 Chevrolet Traverse LS
  I have excellent roof rack options for your 2019 Chevrolet Traverse LS that will accept a variety of roof mounted accessories, both track mount and clamp on. For this, I really like the Yakima JetStream System because they are aerodynamic, lightweight, and have a sleek look. The aerodynamic shape is going to reduce wind drag and noise which is not something most think about when looking at a roof rack. The correct parts for you will vary if you have a bare roof or raised side rails. I have...
  view full answer...
• Thule Kayak Carrier Recommendation for T-Slot Mount on Yakima JetStream Crossbars on 2022 Highlander
  It truly depends on what Thule kayak carrier you wish to use on the Yakima JetStream Crossbars. For example, the Thule DockGlide # TH896 is compatible with the top slots of the JetStream crossbars without any additional nuts. I definitely recommend the DockGlide because it is a saddle-mount style that is much easier to load than the awkward positioning of j-style carriers. In order to have a full JetStream setup of a roof rack on your 2022 Toyota Highlander, it depends on what roof type...
  view full answer...
• How to Add Platform Rack to 2020 Toyota Highlander With Naked Roof
  While you can add a platform rack to your 2020 Toyota Highlander, I checked with our manufacturers and there isn't a direct-mount option for your vehicle. So the only option for your Highlander, assuming it does have a naked roof without flush rails, is to add a roof rack which you can then add the platform rack to. There is one option for this from Yakima, and I verified with them the correct parts for the rack, as well as the correct size of platform needed. The exact parts that will...
  view full answer...
• Recommended Roof Rack for a 2020 Kia Sportage w/out Roof Rails
  Yes, we do have options to add a roof rack to your 2020 Kia Sportage without roof rails. I recommend the Kia Sportage Roof Rack by Yakima. You will need the following parts: Yakima HD Crossbars 500 lbs Capacity Aluminum - Black - 55" Long - Qty 2 item # Y01156 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4 item # Y03541 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers...
  view full answer...
• Recommended Roof Rack For A 2022 Toyota Highlander XLE
  If your 2022 Toyota Highlander has flush mounted rails that run from the front to the back of the vehicle then I recommend the following parts: Yakima HD Crossbars - Aluminum - Black - 55" Long - Qty 2 # Y01156 SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems - Qty 4 # Y53TR HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4 # Y03541 Landing Pad 27 for Yakima SkyLine And Control Towers - Qty 4 # Y66VR If...
  view full answer...
• How to Use Yakima RoundBar Crossbars on a 2022 Toyota Highlander with Bare Roof It does not have
  In order to use Yakima RoundBar Crossbars on a 2022 Toyota Highlander with bare roof you'll need the following: BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 part # Y28TR RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4 part # Y03536 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 part # Y06153 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 part # Y06132
  view full answer...
• Is There A Better Roof Rack Solution For A 2011 Toyota Corolla Than My Yakima Q-Towers
  The aftermarket roof tracks, such as the Rhino-Rack RT-Style Roof Rack Tracks - Rivet Mount - 39-3/16" Long - Qty 2, part # RRRTS534, are not test fit for vehicles. The rack manufacturers recommend that you to a garage that specializes in aftermarket body work to do the installation. It will be up to the shop you take your 2011 Toyota Corolla to determine whether or not the Rhino-Rack RT Style Roof Rack will fit your vehicle. If you get the OK for the Rhino Rack tracks you will need these...
  view full answer...
• Recommended Roof Rack and Cargo Basket for a 2020 Chevy Traverse
  Since your 2020 Chevy Traverse does not have side rails and you are wanting to add a cargo basket, I recommend the Roof Rack by Yakima and it includes the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - JetStream Aero Crossbars - Black - Qty 2 item # Y39UV BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 4 item # Y06153 This is a flush mounted roof rack that will not extend past the side of the mounting legs. This is a more streamlined system than others which...
  view full answer...
• Will Yakima Q Towers Fit a 2009 Honda Fit
  I contacted Yakima directly and they informed me that the older Q Towers will not fit the 2009 Honda Fit. You will need to rebuild your tower, though an older Yakima Round Bar will still be useable. To replace the roof rack for your vehicle, you'll need: - Yakima BaseLine Towers, part # Y28TR - RoundBar SL Adapter for Yakima Towers, part # Y03536 - BaseClip Fit Kit for Baseline Roof Rack, part # Y06145 - BaseClip Fit Kit for Baseline Roof Rack, part # Y06153 Note that you'll need both...
  view full answer...
• Roof Rack Recommendation for Bike Rack and Cargo Box on 2022 Toyota Corolla Cross with Naked Roof
  Thanks for reaching out! For your application we'll need to stick with the Yakima JetStream system since Thule doesn't have a fit for your 2022 Toyota Corolla Cross naked roof at this time (January 2023). The 50" JetStream crossbars will be a great size for fitting both the Thule FastRide Roof Bike Rack # TH95JV and Thule Force XT Sport Rooftop Cargo Box # TH6356B. Here are the parts you'll need for the complete roof rack system: 50" JetStream Crossbars - Black # Y00425 or Silver # Y00428 BaseLine...
  view full answer...
• SportRack Vista XL Opening Cargo Box Compatibility With A 2020 Toyota Highlander
  Crossbar spread is normally measured from center to center of the crossbars themselves. The SportRack Vista XL Cargo Box # SR7018 can fit a crossbar spread of 23-5/8", 25-7/8", 27-7/8", or 29-7/8" so you'll definitely be able to get it to fit on your 2020 Toyota Highlander. If you don't already have a roof rack system on your Highlander then I recommend the 2020 Toyota Highlander Roof Rack by Yakima which includes the following parts: Yakima JetStream Crossbars - Aluminum - Black - 60"...
  view full answer...
• Parts Needed To Install Roof Rack On a 2023 Toyota Corolla Cross
  Here is a list of the parts needed to install a Yakima JetStream roof rack on your 2023 Toyota Corolla Cross. Yakima JetStream Crossbars - Aluminum - Silver - 50" Long # Y00428 BaseLine Towers for Yakima Crossbars - Naked Roofs # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06154 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06153 You can add the Yakima Same Key System # Y07208 to lock your roof rack to your Toyota. This kit included 8 lock cores, four of...
  view full answer...

Do you have a question about this Roof Rack?