Yakima RoundBar Roof Rack Components Needed For A 2022 Kia Telluride

Question

Question:

Just acquired a 2022 Kia Telluride with flush rails. Would like to know what all I need to use Yakima 58” Round Bars to work with ski racks and components from my previous Yakima Highlander set up. Could use my old bars but I’m going to include them in the sale of my Highlander. Seems like there is more than just the Skyline Towers needed to make everything fit. Also, do the Skyline towers grab and hold the flush rails as well as the towers for raised rails?

asked by: John K

0

Expert Reply:

Hey John,

To mount Yakima RoundBars to your Telluride's flush rails you'll need the following components:

SightClip Fit Kit # Y34UR
SightLine Towers # Y64AR
RoundBar SL Adapter # Y03536

Yakima recommends their 48" RoundBar # Y00408 or 50" aero bar for the 2022 Kia Telluride so you'd have quite a bit of overhang if you go with 58" RoundBars # Y00409.

Flush rail towers are typically being screwed into fixed mounting points or clamping down into a slot so they actually are a bit more secure than a raised rail towers that just grip around the rail to secure the roof rack.

expert reply by: Kevin C

0

Jerred H.

12/15/2025

Hey John, how did the setup with the SightLine towers and RoundBar adapters work out on your Telluride’s flush rails? Your update could make it easier for the next person trying to reuse their Yakima gear on a similar roof.

Answer 1

The Yakima SightLine Towers #Y64AR and RidgeLine Towers #8880624 are very similar. The main differences is the SightLine is slightly shorter by 1/2" at 3" tall. Also the SKS Locks #Y07204 is hidden behind the outer cover on the SightLine…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 4

Hey Freddy, that's definitely an interesting situation you've got with the Air Lift 1000 Air Helper Springs for Coil Springs #AL29PD so I did some poking around the internet, and it sounds like it could be a couple of things, but it should be…

view full answer...

Answer 5

Hey Robert. A class III hitch like the Curt item #C13420 is exactly what you need for your 2021 Kia Telluride. It is custom fit and has a 5,000 lbs towing capacity. You'll easily be able to pull a 3,500 lbs Colman 13b with this hitch. The Curt…

view full answer...

Answer 6

Hey James, There is not a plug and play option for the 25' Crown Signia, a splice in option is the only available. We have the Curt harness #C59236 for your vehicle. The instructions are also universal since any splice in harness can be used on…

view full answer...

Answer 7

Hello Frank, thanks for reaching out. The hands-free liftgate sensor on your 2025 Toyota Crown Signia will still work after installing the Curt Hitch Receiver #C35MJ. In most cases, what will happen is the area directly below the receiver will be…

view full answer...

Yakima RoundBar Roof Rack Components Needed For A 2022 Kia Telluride

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching