These 2 leveling scissor jacks with a combined 10,000-lb capacity each will keep your RV level and stable. Each adjusts from 4" to 24" inches as your situation requires, and the bow-tie base steadies the jack on soft surfaces.
Features:
Specs:
Note: These jacks are designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer. Do not use these jacks to lift your trailer or RV. Doing so will exceed the capacity of the jacks.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today you'll be getting a look at and seeing how to install the Stromberg Carlson Leveling Scissor Jack Set, with a quantity of two, part number JSC-24. They're also available in a quantity of one, with part number JSC-24-IND.You can bet on this pair of jacks. These scissor jacks from Stromberg Carlson are great for stabilizing and leveling your camper. As you can see, if your trailer is out of level, you can use your scissor jacks to level it. Check it out. Much better.
As you can see, without your scissor jacks engaged, there's a lot of movement in your trailer. With your scissor jacks engaged, all that extra movement is gone. They're adjustable between four and 24 inches and they have a 5000 pound weight capacity per jack. You can easily raise and lower them with the included crank handle. It's going to work out great on most surfaces.
As you can see, we're on concrete here. The bow-tie base is going to keep it steady even on soft surfaces.They're a bolt-on or weld-on installation. We'll go ahead and show you how to bolt them on now. Here you can see our old rusted out stabilizer jack. It's bent.
We're going to be replacing it. I've gone ahead and removed the old stabilizer. Let's bring in our new one. With our new one, you can see it's got multiple mounting locations. It's completely universal.
Now, you may or not be able to use your same mounting holes and locations. What you need to do is hold it up and figure out where it's going to work best. Now, once you've found a good location to install your stabilizer jack, you want to be sure that you can still easily access your drive nut, which is going to raise and lower your stabilizer jack.You'll want to raise your jack up to where it's making contact with your frame where you want to install it. Then you can mark your holes. Now, there are six holes on each side. I'm only going to be using four total, two on each side. You can use whichever holes work out best for you. Once you've got your holes marked, go ahead and move the jack out of the way, and then you can begin drilling out your holes. I'm going to be drilling out quarter-inch holes. If you'd like to, you can use a pilot bit and then drill out your final size. All right. With all those drilled out, you can go ahead and install your stabilizer jack. You will have to provide your own hardware.I'm just using some quarter-inch bolts with some flat washers and lock nuts. Now you can bring your jack back in and align your holes. Now you'll just loosely install all your hardware. Now we can tighten up our hardware. Now you can raise up your jack and it's ready for when you need it. That's going to complete your look at the Stromberg Carlson Leveling Scissor Jack set.
Average Customer Rating: 4.8 out of 5 stars (94 Customer Reviews)
These 2 leveling scissor jacks with a combined 10,000-lb capacity each will keep your RV level and stable. Each adjusts from 4" to 24" inches as your situation requires, and the bow-tie base steadies the jack on soft surfaces.I haven't install the jacks yet. I can't wait. Sick of my old rusty ones. They look great and were packaged well by etrailer. Got here quick. 524772
PLEASE, do yourself a favor and DO NOT buy these jacks... These are cheap Chinese crap. I'm not really sure what they think there good for ie; don't Jack a frame or axle. WTF? Right out of the box they are a good looking piece of equipment. Don't be fooled. These Jack are incapable of lifting 50% of stated load. And quite frankly, etrailer customer service was rude when contacted. Don't say nobody warned you! 663947
Mike L - 07/01/2019Installation was easy. Parts are good quality. These don't come with the bolts. I had to drill new holes since the old ones didn't line up. 613633
I installed the 4 jacks on my 32' camper to level the camper. I am very pleased to how well they work. But I would caution that you use them to stabilize and not to jack the camper completely off the ground as this puts a bind on the camper causing the doors to not close properly. When used for stabilization, they work very well. It's a lot more convenient then using boards under the tires to level. I purchased an impact driver at Harbor Freight with a socket adapter to operate the jacks. Now it takes minutes instead of 30 minutes to get setup. 831457
It was time to replace existing jack's on my travel trailer and these did the trick. They were as described in the ad, fit perfect and are sturdy. 816029
Just a little longer than I realized but should do the trick 775545
Easy to install and work great. Just need camping weather! 772423
Product worked great. No issues,fit per fectly. 764932
Very good product , Heavy duty , just what I wanted . Received my order very quickly. Highly recommend the scissor jacks and etrailer . 728281
Scissor Jacks are what I ordered. The product arrived as scheduled. The final review will be tomorrow when i install the product on my RV. 704635
Great item, heavy duty and good price. Will do business again 665691
I have received the scissor jacks and they are very well made. I’m going to install them today. Thanks for Great service and great product. 664330
Excellent service and products! 663236
The rear OEM stabilizer jacks on our trailer were nothing but rust after just 5 years. They had never worked well, either, so I was happy to replace them with heavier Stromberg-Carlson jacks. Etrailer had the replacements in shipment the same day I ordered them, and they arrived quickly and in perfect condition. Removing the old jacks took a bit of work, but replacing them was quite fast and easy. It was easy to tell by weight and feel that I was using a far superior product, and although they haven't been field tested yet, I'm sure that they'll do a better job for a much longer time than the OEM equipment. 647595
Fast shipping, and product was better than OEM! Used them this weekend and they worked great! 647589
Our products that we buy from etrailer work great. Just what we needed. They arrived fast. We always purchase from etrailer as their customer service in helping you with the products is the best.. 635856
These are great - they fit the existing mounting holes in the frame (26' Jayco) so they were super easy to install and they function nice and smoothly. 635743
Would recommend upgrading your factory jack to this Leveling Scissor Jack set. Much easier to level trailer and more durable then factory jack. Quick Shipment and easy install had us back camping quickly. Thank You etrailer. Great company, great product. 620111
These were easy to install and work per fect. 619584
Products purchased were good quality comparable to original equipment. 615518
Excellent product. 613465
These jacks worked out great. Replace old single foot OEM jacks that kept benting on a 2005 Outback trailer after flipping the axles for better ground clearance. Would recommend these to anyone looking for a solid jack. 604042
. 591169
Very easy to install. could stop carrying around all those wooden support blocks. 588269
They work great......better than the or iginals! 567842
Do you have a question about this Camper Jack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.