bing tracking image
  1. Camper Jacks
  2. Lippert
  3. Fifth Wheel Camper
  4. Pop Up Camper
  5. RV Motorhome
  6. Teardrop Camper
  7. Travel Trailer
Lippert Scissor Stabilizer Jacks with Handle - 30" Lift - 10,000 lbs - Qty 2

Lippert Scissor Stabilizer Jacks with Handle - 30" Lift - 10,000 lbs - Qty 2

Item # LC285344
Our Price: $148.69
You Save: $27.77
Camper Jacks
Shipping Weight: 35 lbs
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Need help with installation?
Locate installers near me
These scissor jacks with a 10,000-lb combined capacity will help keep your trailer or RV stable. They adjust from 4-1/4" up to 30" as needed. The bow-tie bases steady the jacks on soft surfaces. Includes handle. 1-800-940-8924 to order Lippert camper jacks part number LC285344 or order online at Free expert support on all Lippert products. Great prices and Fastest Shipping for Lippert Scissor Stabilizer Jacks with Handle - 30" Lift - 10,000 lbs - Qty 2. Camper Jacks reviews from real customers.
  • All Info
  • Reviews (202)
  • Q & A (0)
  • Photos

Lippert Camper Jacks - LC285344

  • Fifth Wheel Camper
  • Pop Up Camper
  • RV Motorhome
  • Teardrop Camper
  • Travel Trailer
  • Stabilizer Jacks
  • Scissor Jack
  • 9001 - 10000 lbs
  • 2 Jacks
  • 30 Inch Lift
  • Lippert
  • Bolt-On
  • Alloy Steel

These scissor jacks with a 10,000-lb combined capacity will help keep your trailer or RV stable. They adjust from 4-1/4" up to 30" as needed. The bow-tie bases steady the jacks on soft surfaces. Includes handle.


  • Scissor jacks help to stabilize 5th-wheel, travel, horse, and cargo trailers
  • Bow-tie bases keep the jacks steady, even on soft surfaces
  • Heavy-gauge steel construction ensures durability and strength
  • Black powder coat finish provides protection from rust and corrosion
  • Easy bolt-on installation with included hardware
  • Handle included


  • Height:
    • Collapsed: 4-1/4"
    • Extended: 30"
  • Lift: 30"
  • Collapsed length: 32-1/2"
  • Mounting base diameter: 9"
    • Mounting bolt diameter: 3/8"
  • Load capacity: 10,000 lbs (5,000 lbs per jack)
  • Quantity: 2 jacks
  • 90-Day warranty

30 inch mounting holes

Note: This jack set is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer. Do not use these jacks to lift your trailer or RV. Doing so will exceed the capacity of the jacks.

If you are looking for a safe, durable, and dependable option for stabilizing your trailer, these scissor jacks are a safe bet. The mounting pattern and overall dimensions of each jack are industry standard, which means that they should easily bolt onto your trailer in place of your original jacks. And each jack is constructed from powder coated steel to ensure that it will resist rust and corrosion and hold up well to the elements. In addition, the installation hardware and crank are included with the set so you are ready for manual operation right out of the box.

285344 Lippert Components (LCI) Scissor Stabilizer Jack Set with Handle - 30" Lift - 10,000 lbs - Qty 2

Customer Satisfaction Score:

Customer Reviews

Lippert Scissor Stabilizer Jacks with Handle - 30" Lift - 10,000 lbs - Qty 2 - LC285344

Average Customer Rating:  4.8 out of 5 stars   (202 Customer Reviews)

These scissor jacks with a 10,000-lb combined capacity will help keep your trailer or RV stable. They adjust from 4-1/4" up to 30" as needed. The bow-tie bases steady the jacks on soft surfaces. Includes handle.


Deception in advertisin It may be my fault for not reading to total description in detail rather than glancing over it. Similar products from other companies list the weight capacity as each but this product lists the 10,000 pound weight capacity as both. They are only good for 5000 each. The [online] option was at least 6000 pounds! The only reason they were not returned is the 30in capability.

Etrailer Expert

Jenny N.


We do have it listed on the product page that the capacity is 5000 pounds per jack and that the combined capacity is 10,000 pounds.


These worked out great easy to install with the circular mounting plate.


Looks great. Very stout compared to the stabilizers that came with the camper


Added these to stabilize my Forest River V-Lite 36' camper with 3 slides. With the existing Lippert electric stabilizers, the camper rocked severely when someone walked around in it. These jacks were just the ticket. I use them about 8-10' in from the ends on the frame. The array of holes on the jacks allowed me to angle them at 45 degrees. This helped the swaying and rocking. Love what they have done for us.


The camper jacks were as pictured and described. I was not able to bolt them to the frame due to the narrow 3 inch wide frame. I welded them to the frame and they work great. Much better than the electric stabilizer that came with the 5th wheel camper. I would recommend them to anyone.


Great service. Arrived on time in good shape


The best price, quality &
keep up the good work guys..



Definitely recommend still operating like the first day of installation


I have yet to use the product, but I am sure it will be satisfactory. The jacks will be used to stabilize the rear of our 5th wheel trailer.


We have a mobile home that needed leveling. I bought 2 sets of these. The website was easy to navigate and purchasing easy and smooth. Shipping was free and the jacks were delivered faster than anticipated. Right out of the box they were easy to use, place and set. They have done their job well so far. My only critique is that when I was researching the jacks I wanted the title says 12,000 lbs. That is not per jack, it is the 2 combined, so what I got was 2 jacks rated for 6000 lbs each. In all honesty it was an error on my part for not paying closer attention to the detailed description were it does say it is combined.


This product was a replacement for one of scissor jacks that was on my camper that was all bent up. Replaced it with a new one, which was easy with the the self tapping screws provided.


Great product. Well made, sturdy and easy to install. Would recommend to friends. Thank you etrailer



After 1 year these stabilizers are still working great without any problems. Well mmade and great etrailer service too.


Awesome, the delivery was on time,navigating thru the web site was easy,im using to replace the old jacks in rear of my 5th wheel,


I have purchased product from eTrailer many times and their service has always been excellent. Ordered these stabilizers on Wednesday and received on Friday. Always great value and quality products.


Have Jack's mounted and work fine. Crank is not useful. Going to find another way to run the Jack's up and down.


Thanks, the jacks and support bars works great and also keeping me informed on the back order. Will order again from you


Bought these to replace the ones on my RV.
have wortked flawlessly for over 18,000 KMs and all the weather we encountered. Very pleased with them and the service at etrailer.


Top quality items at a great price. Fast shipping and prompt help. This is why I shop with etrailer.


Work just fine. I put them on my motorhome and wasn't able to put them on the way I wanted. Still work ok


jacks.. got the jacks when he said theyed be here.. put them on trailer... nice for the money and easy to put on .. thank you


Very happy with product. As advertised. Arrived on time. Easy online ordering. Will use etrailer again.


Great price. Got my scissor jacks in three or four days.


Great quality for the price.


Always fast to receive from etrailer and with 4 teenage boys staying with us needed the extra stability


good product


Great item easy to mount because of the pre drilled plate.

Show More Reviews

See what our Experts say about this Lippert Camper Jacks

  • Load Capacity of 30" lift Lippert Scissor Stabilizer Jacks, # LC285344
    Per the manufacturer the 30" lift Lippert Scissor Stabilizer Jacks, # LC285344 has tested and rated for 5,000 lb. per jack load capacity at any range of extension/collapse.
    view full answer...
  • Why Doesn't the Lippert Scissor Stabilizer Jacks # LC285344 Lower Itself From Weight of Trailer
    The friction in the threads of the screw on the Lippert Scissor Stabilizer Jacks with Handle # LC285344 keep it from allowing itself to unscrew and lower itself. When the weight of the trailer pushes horizontally on the threads of the jack it does not allow it unscrew itself.
    view full answer...
  • Can Lippert Scissor Jack LC285344 Replace Automated Leveling System
    The Lippert Scissor Stabilizer Jacks # LC285344 can be used to provide a lower-cost and less-complex way to level/stabilize a motor coach or trailer These jacks offer 30-inches of lift and 5000-lbs of load capacity for each jack. This item is a set of two. The jacks comes with installation hardware and include a cranking handle. When fully collapsed/retracted the jack's height is only 4-1/4-inches from the mounting point.
    view full answer...
  • What Size Drill Bit is Needed to Attach Lippert Scissor Stabilizer Jacks with Included Hardware
    The Lippert Scissor Stabilizer Jacks with Handle - 30" Lift - 10,000 lbs - Qty 2 # LC285344 comes with #14 self tapping screws, which have a diameter of about .20", so you'll want to use something like a 1/8" drill bit if you're not using the existing holes in the frame. If you've got something smaller than that it might work but I'd be worried about breaking the bit off drilling into a solid steel frame, so proceed with caution if you're going that route.
    view full answer...
  • Can Lippert Scissor Jacks # LC285344 be Welded On Instead of Bolted
    If you wanted to weld the Scissor Jacks # LC285344 to your trailer instead of bolting them you certainly could.
    view full answer...
  • Dimensions For The Lippert Scissor Stabilizer Jacks with Handle # LC285344
    The spacing for the Lippert Scissor Stabilizer Jacks with Handle # LC285344 that you have pictured is approximately 1-7/8".
    view full answer...
    Image 1 for
  • Scissor Jack Recommendation for Stabilizing Motorhome Class C
    There's no reason why you couldn't use the # LC285344 scissor jacks to stabilize your RV when it's parked. Keep in mind these aren't meant to jack the RV off the ground, but are meant to keep the vehicle stable while you move around within it. The jacks can be welded on or bolted in place, your choice. I'd recommend installing them to the underside of a substantial fame or cross member.
    view full answer...
  • Can Scissor Jacks Be Used To Lift A 2020 Thor Delano Class C Motorhome
    Scissor jacks like the Lippert Scissor Stabilizer Jacks with Handle # LC285344 are only designed to stabilize your RV. This means they can only be lowered until they're just touching the ground so that they prevent your RV from rocking side to side. If you're looking to lift the motorhome you would need a leveling jack like the Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System # LC358590. The installation of this system can be quite a bit of work so I'd recommend having...
    view full answer...
  • RV Scissor Jack Solution with Round Upper Mounting Bracket
    There isn't a way to rotate the mount in relation to the foot direction of the stabilizer scissor jacks part # JSC-24 and since none of our options are setup like that our best solution would be the # LC285344 which has a round mounting bracket on the top instead.
    view full answer...
  • 1998 Jayco Eagle 10 SC Scissor Jack Stabilizer Recommendation
    We have a pair of RV scissor jack stabilizers as part # LC285344 which would be a great choice. They bolt on and come with a handle to make for a much easier raise/lower than the swing down that you currently have.
    view full answer...
  • Recommendation to Stabilize Living Quarters Horse Trailer with Single Front Jack
    To help stabilize your horse trailer I recommend adding sets of the Lippert Scissor Stabilizer Jacks with Handle # LC285344 along your trailer frame. These are designed to essentially take up space between your trailer frame and the ground and limit rocking. Typically you'll install one set at the front of the trailer and one set at the back but you can install these anywhere along the frame to give you the best situation possible. The only thing you want to keep note of is that these...
    view full answer...
  • Is Capacity of Stabilizing Scissor Jacks Combined or For Individual Jack
    The capacity of scissor jacks is based on the individual jack. For example, the Scissor Stabilizer Jacks w/ Handle - 18-3/4" Lift - 10,000 lbs - Qty 4 # TJSCHD-24-4 each have a 2,500 lb capacity, but since these come in a quantity of four, the capacity is a total of 10,000 lbs. Since your 2019 Micro Minnie 2100BH has a 7,000 lb GVWR, these scissor jacks would have more than enough capacity, and it is recommended you replace all of them at the same time. If you were instead referring...
    view full answer...
    Image 1 for
  • Best Way to Control Sway on a 2018 Thor Motor Coach Gemini 24TX
    I do have options for you to help control sway on your 2018 Thor Motor Coach Gemini 24TX but they do not make a steering stabilizer for this chassis to my knowledge. Instead, I recommend adding a rear anti-sway bar like the Roadmaster Rear Anti-Sway Bar for Vans part # RM-1209-131. The rear anti-sway bar is actually going to do more for you in regards to sway control compared to a steering stabilizer. The rear anti-sway bars are also typically the most beneficial enhancement that you can...
    view full answer...
  • Recommended Replacement Stabilizer Jacks For A 2011 K-Z Durango 1500
    If you are needing to replace the stabilizer jacks on your 2011 K-Z Durango 1500, we will have 2 different styles. The Stallion Stabilizer Jacks # 288-01892-2 are a drop down style so they are easy to use, but they are only rated up to 1,000 pounds and have 22-1/4" of travel. The Lippert Scissor Stabilizer Jacks # LC285344, on the other hand, are scissor jacks so they will be a little more difficult to deploy. However, they are rated up to 10,000 pounds (combined) and have 30" of lift....
    view full answer...
    Image 1 for
  • Stabilization Jacks With At Least 28" of Extension
    The Ultra-Fab Ultra Scissor Jacks - 30" Lift # UF48-979031 will provide you with 30" of maximum extension. Collapsed these jacks are 4-3/4" tall and capable of stabilizing 6,500lbs. The Lippert Scissor Stabilizer Jacks with Handle # LC285344 are also 30" jacks. Collapsed these jacks are 4-1/4" tall and capable of stabilizing 10,000lbs. The Lippert High-Speed Power Stabilizer Jack # LC369774 is a electric powered option that has 30" of extension. This unit being one piece is 78" long...
    view full answer...
  • Recommended Travel Trailer Stabilizer Jacks For 6,000LB Dry Weight Camper
    Since you are looking at stabilizer jacks the weight is not as important especially with a dry trailer weight of 5,977lbs. Most stabilizer jacks are rated for at least a 5,000lb rating per jack. Do remember that this is a stabilizing weight rating and not a lifting capacity. I would focus mostly on lifting height and mounting position. You want to make sure that the jacks are tall enough for your camper not only on level ground but if you like to dry camp at more primitive sites you will...
    view full answer...
  • Will Ultra-Fab Fifth Wheel King Pin Tripod Stabilizer Work With Trailair Pin Box?
    The Ultra-Fab 5th Wheel King Pin Tripod Stabilizer, # UF19-950001 is going to work properly with a Trailair such as # LC158778. However, there are other options for a fifth-wheel trailer such as your Vilano 365RL if you want to look into them. Landing Gear Set # RVLG-8HDL has weight capacity of 8,000 lbs and a leg height of 32-3/4 inches retracted and 53-1/4 inches extended. There is even an optional 12-Volt Motor Kit, # LC142178, available. You could also take a look at the Lippert Scissor...
    view full answer...
  • How to Remove Stabilizer Jacks From a Travel Trailer
    There are only 2 ways to install a jack on a trailer; by bolting it on or by welding it on. A simple bolt-on installation could very well be removed at home but you will need to make sure that whatever jack you decide to replace it with is installed correctly for safety. If it is welded on you will need to find a qualified welder to remove the jacks. If you have scissor style stabilizer jacks like the Lippert Scissor Stabilizer Jacks with Handle # LC285344, then we do offer a stabilizer...
    view full answer...

Do you have a question about this Camper Jack?

Info for this part was:

Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Joshua S
Video Edited:
Joshua S
Employee Kathleen M
Video by:
Kathleen M
Employee Cole B
Installed by:
Cole B
Employee Randy B
Installed by:
Randy B
Employee Chelsea B
Written by:
Chelsea B
Employee Wilson B
Updated by:
Wilson B
Employee Brian T
Updated by:
Brian T
Employee Kristina F
Updated by:
Kristina F
Employee Mike S
Updated by:
Mike S

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.