Grommet for Optronics A91, AL82, AL90, AL91, or AL191 Series Trailer Lights - Black PVC

Ask the Experts about this Optronics Accessories and Parts

• Hole Size Needed to Install Flush Mount Grommet for Trailer Clearance, Side Marker Lights
  The Optronics Flush Mount Grommet for A91 and AL91 Series Trailer Clearance and Side Marker Lights # A91GB, will fit a hole that measures 2-7/8 inches across and 1-1/2 inches tall. You will want to round the corners for a snug fit. This rubber grommet gives shock mount protection that extends the life of the lamp. I have included a video review of this part for you to check out.
  view full answer...
• Size of Mounting Hole Required for Installing Optronics Grommet # A91GB
  The Optronics Grommet # A91GB that you referenced, which is designed to work with the Thinline LED # AL91RB that you were looking at, will install into a mounting hole on the trailer that is 2-7/8 inches across and 1-1/2 inches tall. If you do not have this type of mounting hole on your trailer, you can use the Mounting Bracket # A91BOB instead, which will allow for a surface mount installation. I have attached a couple short video demonstrations on these products that you can also...
  view full answer...
• Will Replacement Grommet # A91GB Work for Me
  The Flush Mount Grommet, # A91GB measures 3-5/16" long x 1-15/16" wide x 1/2" deep and is used for flush mounting Series 91 lights. This grommet will work as an exact replacement for: Uni Bond # GR1225 Wesbar # 221588 Truck Lite # 15702 Peterson # 150-181 In order to make sure that we have the correct grommet, I will need the numbers off of your taillight housing. Please send me an email with those numbers and I would be happy to help you locate the correct replacement grommet.
  view full answer...
• Options to Mount Optronics A91 and AL91 Series Lights
  The grommet # A91GB is inserted into a hole in your trailer. For a bracket to mount to the trailer you can use # A91BB, in black, or # A91CB, in chrome.
  view full answer...
• LED Clearance Light Recommendation for Sundowner Horse Trailer
  What you have on your horse trailer is a pretty common clearance light that we do offer in red and amber as an LED. For the red you'd want the part # AL91RB and for amber part # AL91AB. You'll also need the grommet part # A91GB and the right angle pigtail part # A46PB and you'd be set.
  view full answer...
• How to Determine if Amber Clearance Light Will Work on Trailer
  In order to determine if the Thinline LED Clearance and Side Marker Light # AL91AB will fit your trailer you simply need to measure your light and see if it matches; this light is 2-1/2" long x 1-3/16" wide x 7/8" deep. It is also a great option because it can be either recess or surface mounted. For a surface mount you will use Self-Grounding Mounting Bracket # A91BOB with Plug # A91LW. For a recess mount you will use Grommet # A91GB with Right Angle 2-Wire Pigtail # A46PB. I...
  view full answer...
• Difference Between Optronics Lights AL90RB and AL91RB
  The Optronics FLEET Count Mini Thinline Sealed LED Marker/Clearance Light # AL90RB has a single LED element while the similar Thinline LED Clearance and Side Marker Light # AL91RB has three LEDs for brighter output and it is submersible. Both can mount using either grommet # A91GB or bracket # A91BOB.
  view full answer...
• Clearance and Side Marker Light With Clear Lens and Red LEDs
  We do carry a number of options for clearance lights that have a clear lens and red LEDs, but the red equivalent of the Thinline LED Mini Clearance and Side Marker Light - Clear Lens - Amber # AL91CAB has a red lens as opposed to a clear lens; it is the Thinline LED Clearance and Side Marker Light # AL91RB. If you want to go this route you can mount it with Grommet # A91GB (recessed mount) or Mounting Bracket # A91BOB (surface mount) with Right Angle 2-Wire Pigtail # A46PB. For similar...
  view full answer...
• Replacement Trailer Clearance Light for PM150
  The most similar trailer clearance lights we offer to replace the PM150 lights you have now would be the Thinline LED light part # AL91RB. For a replacement harness that would plug into this you'd need the part # A46PB and then for a grmmet part # A91GB for a flush mount or part # A91BOB for a bracket for surface mount.
  view full answer...
• Recommended Side Marker Lights for EZLoader Trailer
  I can help you find the correct parts for your EZ Loader trailer. Based on the photos you submitted, the # AL91RB will fit your style connector on your trailer. The amber light is # AL82AB, and the grommet you will need is # A91BOB. All these items come in quantity of 1 so you will want to adjust the quantity on the grommets page to 2. I have linked all the above products to this page for your convenience.
  view full answer...
• How Does the Flush Mount Grommet # A91GB Install a # AL91AB Light Into a Trailer
  All the parts you ordered are designed to work together, but the grommet part # A91GB is for flush mounting the Optronics Light part # AL82AB that you have. This grommet will get installed into a hole in on your trailer that is about 2-7/8 inches across and 1-1/2 inches tall. If you do not have a hole with those dimension you might be better served getting a Black Mounting Bracket # A91BOB to allow you to surface mount the # AL82AB.
  view full answer...
• Does Optronics Mini Thin Line LED Marker/Clearance Light # AL191AB Use Grommet # A91GB
  Yes, the Optronics Mini Thin Line LED Marker/Clearance Light # AL191AB can be flush-mounted using the Optronics Flush Mount Grommet # A91GB. This PVC grommet will provide a degree of shock protection for the installed light and its rear opening allows easy access for wiring. If you prefer a surface-mount installation, you can instead use self-grounding mounting bracket # A91BB. The marker light # AL191AB has a 2-prong input on the back; you can use 6-inch pigtail plug # A46PB, or...
  view full answer...
• Incandescent Trailer Clearance Light that Uses 2 Wires
  In red you'd want the part # AL91RB or in amber you'd want # AL91AB for the submersible incandescent lights. For a two wire harness like you need you'd want the part # A46PB with grommet part # A91GB or bracket # A91BOB.
  view full answer...
• Brackets and Wiring for Sealed, Miro Flex, Mini Thin Line LED Marker or Clearance Light # AL191AB
  We do have the parts you need to complete installation of the light. But first, sealed, Miro Flex, Mini Thin Line LED Marker or Clearance Light # AL191AB does not include a base or wiring harness. We have the compatible bases listed as related products on the right hand side of its product page. There is flush mount grommet, # A91GB Self-grounding black bracket, # A91BB Black bracket with open back, # A91BOB Chrome bracket with open back, # A91OB Self-ground chrome bracket, # A91CB For...
  view full answer...
• Mounting Options for Optronics LED Trailer License Plate Light LPL91CB
  The Optronics LED Trailer License Plate Light # LPL91CB does not include a mount but it can be used with either the grommet # A91GB or the Mounting Bracket # LP25SB and grommet together depending on the nature of the trailer. You can use butt connectors # 05731-5 to make the spliced connections.
  view full answer...
• Grommet Recommendation for the Trailer Clearance and Side Marker Lights A91AB
  The Optronics Flush Mount Grommet for # AL91AB Series Trailer Clearance and Side Marker Lights # A91GB, will fit a hole that measures 2-7/8 inches across and 1-1/2 inches tall.
  view full answer...
• What I Need To Install LED Trailer Lights On A Tent Trailer
  I have the perfect way for you to install tailights on your tent trailer with everything you will need although it will not come in a kit.You will want to piece together a lighting assembly for your tent trailer with your exact specifications, which I have done for you. For a set of round, surface mounted, LED taillights, I recommend using the Transit Tail Light part # STL90RB. These taillights are 7" wide X 1-7/16" thick and will work well for you. We also have a similar set of running...
  view full answer...
• Is there a Grommet for Peterson Clearance Light # M152A
  For a rubber grommet that will fit the Peterson clearance light # M152A you can use # A91GB. If you are looking for the plastic base we do not carry that particular model and in that case I recommend switching to light # A91AB and using bracket # A91BB with power wire # A91LW (the light grounds through one of the mounting screws with this light and bracket combination).
  view full answer...
• Will Optronics Side Marker Light # AL91RB Mount in Existing Rubber Grommets on Trailrite Trailer
  The Optronics Clearance/Side Marker Light, part # AL91RB, will mount in the rubber grommets that your Grote 4641 lights are installed in. I looked it up in the industry cross reference for lighting and it listed the # AL91RB light as fitting in your grommets. The rubber grommet we offer for the # AL91RB light is the Optronics Flush Mount Grommet, part # A91GB. This is a rubber grommet that is used when mounting the light flush to the trailer. It measures 3-5/16 inches long x 1-15/16...
  view full answer...
• Mounting Options for LED Clearance and Side Marker Lamp Part # AL82AB
  The clearance and side marker light you referenced, part # AL82AB, uses a plastic mounting base that is sold separately. The base is available in a black (part # A91BOB) or chrome (part # A91OB) finish. If the appropriate sized hole is available, the lamp can be flush mounted using a grommet mount, part # A91GB.
  view full answer...
• Install Grommet to Use with Clearance Light part # LPL91CB
  For a grommet to use with the clearance light part # LPL91CB you would want the part # A91GB which was designed for it.
  view full answer...
• Looking for LED Version of # AL91RB Mini Rectangular Clearance/Side Marker Lamp
  You bet we do! For the LED version, you'll need part # AL91RB. The lamp can be grommet mounted using # A91GB or surface mounted using a self grounding base like # A91BB for black/ # A91CB for chrome or a standard base like part # A91BOB for black/ # A91OB for chrome. If you use a self grounding base, use the single wire pigtail, part # A91LW or for the standard base, use the two wire pigtail, part # A49PB.
  view full answer...
• LED Tail Light, Marker Light, License Plate Light, and Interior Lights for a 1976 Horse Trailer
  Starting with the tail lights, # STL36RB and # STL37RB are LED lights and mount on studs (surface mount). For side marker lights you can use # AL82AB with grommet # A91GB, and base # A91BOB. For a license plate light with bracket you can use # LPL55CB. We have numerous interior LED light options and I have included a link to them to the right. And to add a 7-Way trailer end you can use # H20046. Because there are so many light options if these won't work for you, let me know what...
  view full answer...