Ark Drop Down Corner RV Stabilizer Jacks - 30" Long Corner Steadies - Black - Qty 2

See what our Experts say about this Ark Camper Jacks

• Availability Of 33" Ark Stabilizer Jack And Dimensional Diagrams Of Similar Ark Corner Steadies
  We do carry the 33" Ark Stabilizer Jack that you are looking for with part # ARK77FR. I was able to track down a few drawings that you should find helpful. These are for the 30" # ARK94FR and the 24" # ARK34FR Stabilizer jacks. I'm afraid we don't have a drawing for the 33" jack.
  view full answer...
  
• Is There a Weight Capacity Rating of the Ark Stabilizer Jack?
  The Ark Drop Down Corner RV Stabilizer Jack Kit - 30" Long Corner Steadies - Black # ARK94FR does not have a capacity rating. This is because they are not designed to do any lifting. They will be strong enough to stabilize your trailer so you can camp in comfort because your suspension will still be supporting the weight of the trailer. The stabilizers simply give you the support so it you won't feel movement in the floor as you walk to the outer edges of the camper.
  view full answer...
• Replacement Brake Kits with Handbrake for a Lightweight Off-Road Tent Trailer
  Hey John, thanks for reaching out! We have a handful of trailer brake assemblies that come with handbrakes so if kind of depends on what your trailer is equipped with. I'm not sure what those parts numbers are that you listed, but we don't have anything set in place to finance (or refinance) anything. For electric brakes we have the 2.2K # K23-103-104-00 and 3.5K # K23-086-087-00 from Dexter Axle, but if you have a 3.5K hydraulic setup then the DeeMaxx # DE42GR is what I recommend picking...
  view full answer...
• Overall Length of the 24" and 30" Ark Drop Down Corner Stabilizer Jacks
  I contacted the manufacturer about the lengths for these stabilizer jacks and have included the information they were able to provide me. The Ark Drop Down Corner RV Stabilizer Jacks # ARK34FR are 422 mm (16.6") collapsed and 600mm (23.6") extended. The Ark Drop Down Corner RV Stabilizer Jacks # ARK94FR are 497mm (19.5") collapsed and 774mm (30.5") extended. I have included the diagrams that they provided me for you to check out.
  view full answer...
  
• How to Determine Correct Length of Ark Stabilizers
  The Ark stabilizers won't affect your ground clearance, but to determine the right ones that really depends on how high up your frame is off the ground. Overall, the Ark RV Stabilizer Jacks # ARK34FR are 16.6" collapsed and 23.6" extended, while the Ark # ARK94FR 19.5" collapsed and 30.5" extended. So you'll want to measure the distance from the ground to the frame where you plan on installing the stabilizers and use the lengths to find the right size. You just want to be sure the lengths...
  view full answer...
• Can ARK Stabilizer Jacks Rotate 180 Degrees
  Both of the ARK stabilizer jacks # ARK94FR and # ARK87FR can rotate 90 degrees forward and back so in a way it is 180 degrees like you asked about. The difference is the # ARK94FR has a square tube and # ARK87FR has a round tube. These are both going be quicker to use than raising and lowering the # JSC-24-IND which require a lot more cranking.
  view full answer...
• What Size Is The Mounting Surface for the Ark Drop Down Corner RV Stabilizer Jacks # AR94FR?
  The Ark Drop Down Corner RV Stabilizer Jacks # AR94FR does include the mounting plate which is loosely installed on the jack. This plate has a flat surface area which is 4.6" long x 1.83" wide. It would typically be welded directly to the bottom of the frame as it bolts to the jack from the sides, but can be welded to any structural surface which will support stabilizing your trailer. Since this is a universal fit with its weld on design you can also have additional steel welded on the...
  view full answer...
• Solution to Stabilize 2023 No Boundaries Travel Trailer
  Adding the Ark Drop Down Corner RV Stabilizer Jacks # AR94FR or # ARK94FR for black would make a difference in stabilization. Although you don't want to go overboard adding things, more is generally better for trailer stabilization. Installing these on the corners of your 2023 NoBo will help reduce that movement when you're inside. Another option would be to add the JT's Strong Arm Jack Stabilizer Kit for Travel Trailers # LC191025. These attach to the existing scissor jacks and lock...
  view full answer...
• Can Ark Drop-Down Stabilizer Jacks be Used in Middle of Trailer
  Yes, it's perfectly fine to mount the Ark Drop Down Corner RV Stabilizer Jacks - 30" Long Corner Steadies # ARK94FR in the middle of your 5th wheel; they can stabilize in the front, center, or rear of your trailer.
  view full answer...
• Can Ark Drop Down Stabilizers Be Extended And Retracted With A Power Drill
  Yes, the Ark Drop Down Corner RV Stabilizer Jacks # ARK94FR are definitely an upgrade over standard trailer stabilizers. The drop down feature makes it a lot quicker to get the jacks up and tucked out of the way so they don't catch when the trailer has limited ground clearance, unlike standard stabilizers. When it comes to stabilizers using a drill is also a no-no since you can strip out the gears and render the stabilizer useless. That being said, as long as you use a standard drill (no...
  view full answer...
• Angle of Different Stabilizer Positions for Ark Drop Down Corner RV Stabilizer Jacks
  The Ark Drop Down Corner RV Stabilizer Jacks # ARK94FR are able to lock into place at 30 and 60 degrees as stabilizers. They also have the 90 degree position where it is rated for 1,929 lbs and then the stored position.
  view full answer...
• Measurements Of The Ark Drop Down Jack When Folded Into Stored Position And Retracted position
  The Ark Drop Down Corner RV Stabilizer Jack Kit - 30" Long Corner Steadies - Black Item # ARK94FR fully retracted are about 19-1/2" long. When folded up, the widest point is going to hand down about 4-1/2".
  view full answer...
• Can The ARK Drop Down Corner RV Stabilizer Jacks # ARK94FR Be Bolted On?
  The 30" Ark Drop Down Corner RV Stabilizer Jacks # ARK94FR have a weld on design. This is the only way to install the jacks with the included mounts as there is not enough room between the stabilizer itself and the mounting plate for additional hardware. We do have the shorter Stallion 22-1/4" Stabilizers # 288-01892-2 which do offer a bolt on installation if the length of the jack will work for your application.
  view full answer...
• Dimensions of Weld-On Plate for Ark Drop Down Corner RV Stabilizer Jack Kit
  I have attached for you below a photo with the dimensions of the weld-on plate for the Ark Drop Down Corner RV Stabilizer Jack Kit part # ARK94FR. The plates are 117mm long x 72.50mm wide or 4.6" long x 2.8" wide.
  view full answer...
  
• Recommended Replacement Stabilizer Jacks For A 2011 K-Z Durango 1500
  If you are needing to replace the stabilizer jacks on your 2011 K-Z Durango 1500, we will have 2 different styles. The Stallion Stabilizer Jacks # 288-01892-2 are a drop down style so they are easy to use, but they are only rated up to 1,000 pounds and have 22-1/4" of travel. The Lippert Scissor Stabilizer Jacks # LC285344, on the other hand, are scissor jacks so they will be a little more difficult to deploy. However, they are rated up to 10,000 pounds (combined) and have 30" of lift....
  view full answer...
  
• Stabilizer Jacks for R-Pod 195 Camper
  We don't offer a combination leveler/stabilizer jack, but if you're wanting something in a stabilizer jack that is very sturdy, you can't go wrong with the ARK Drop Down Corner stabilizer jacks. They're available in a powder coat or a zinc finish, in 24 or 30 inch lengths. • 24 inch length in powder coat as part # ARK34FR or zinc as part # AR34FR • 30 inch length in powder coat as part # ARK94FR or zinc as part # AR94FR The manufacturer, ARK is located in Australia where off-road trailering...
  view full answer...
• Recommended Weld-On Drop Leg Stabilizers For A UTV Trailer
  We carry a few different weld-on camper jacks to help stabilize your trailer and allow you to easily get your equipment off the trailer. The real question is going to be how long of a jack do you need? The Square Drop Leg Stabilizer Jack - 18" Travel # SJ-R208 you were looking at would work for your needs but we have a few other options that are a bit more compact to ensure you have plenty of clearance. Starting out small we have the etrailer Stabilizer Jacks # TJ01RT-HD, which have a...
  view full answer...
• How Much Do the Ark Drop Down Corner RV Stabilizer Jacks Weigh
  The Ark Drop Down Corner RV Stabilizer Jack Kit part # ARK94FR weigh around 30 lbs for the pair.
  view full answer...
• Recommended Rear Stabilizer Jacks For A 2006 Forest River Cardinal 5th Wheel Trailer
  For a 2006 Forest River Cardinal 5th wheel trailer I recommend the Ultra-Fab Power Twin II Electric Stabilizer with Dual Motors # UF39-941705. This motorized jack can help support the rear of your trailer and get rid of the springboard feeling you get inside the trailer when someone is walking around. This is one of the only stabilizers that can also be used for leveling as well. Most other models will bend or collapse if you use them to lift and level the trailer, whereas this model has...
  view full answer...
• Will the Ark Drop Down Corner RV Stabilizer Jack Kit Work On a Motorhome
  The Ark Drop Down Corner RV Stabilizer Jack Kit part # ARK94FR will work on pretty much any application such as a trailer or motorhome in which you have space on the frame for mounting and the reach of the leg is sufficient to make contact with the ground. It is primary designed for trailers but should be able to be used on a motorhome no problem.
  view full answer...
• Will ARK RV Drop Down Stabilixer Jacks Prevent Rear of 5th Wheel Trailer From Moving When Parked
  The ARK # ARK94FR Drop Down Corner RV Stabilizer Jack Kit can extend out to 30 inches, and would do an outstanding job of preventing the rear of your 5th wheel from bouncing around while you're moving around inside. The stabilizer jacks will prevent both up and down as well as side to side motion. The jacks will extend and retract using the included crank handle. If you click the provided link, you can check out a product description video featuring the # ARK94FR Stabilizer Jacks.
  view full answer...
• Recommended Replacements for Airstream 400914-03 Stabilizer Jacks
  The ARK # ARK94FR stabilizer jacks could work for you, but you'll likely find they're too tall. The jacks measure 30 inches tall when fully extended or 19-1/2 inches tall when fully retracted. The existing 400914-03 jacks on your Airstream have a fully extended length of 19 inches, so these likely wouldn't be a good fit. The ARK # ARK34FR is height adjustable from 16-24 inches, so it would be more similar to your existing jack in that respect, so that's what I'd recommend going with. They're...
  view full answer...
• Will Ark Drop Down Corner Stabilizers Fit Motorhome
  The Ark Drop Down Corner RV Stabilizer Jacks # ARK94FR are not vehicle/trailer specific fits, so they can fit anything they can be welded onto.
  view full answer...

Do you have a question about this Camper Jack?