Leveling Scissor Jack - 30" Lift - 5,000 lbs

Ask the Experts about this Stromberg Carlson Camper Jacks

• Scissor Stabilizer Jack Replacement for 2015 Dutchmen Kodiak 220RBSL
  The great thing about scissor leveling jacks like the # JSC-30-IND is that they are universal enough that you don't have to get exact match when replacing one like in your situation. So even if the # JSC-30-IND isn't exactly what you have now this will work great for you! I attached a review video for this for you to check out as well.
  view full answer...
• Can Scissor Jacks be Used to Lift an RV 1 Foot Off the Ground
  Scissor jacks such as # JSC-30-IND are not meant to lift up vehicle or trailer so I do not recommend them for this application. What I recommend is to use leveling blocks such as # CAM44521 for a 10-pack. You can drive right up onto these blocks though it may be difficult to get it up to a foot tall without using a bunch of them stacked like a pyramid. Another option is to use a bottle jack such as # ALL640405 to lift the vehicle and then use the blocks or jack stands to hold the...
  view full answer...
• Scissor Jack Recommendation for Changing Spare Tire on Utility Trailer
  What you could use for a jack for changing a spare on your utility trailer is the Scissor Jack part # JSC-30-IND. This is rated to lift up to 5,000 lbs and would work well for you. You will also need the crank handle part # JCH-1.
  view full answer...
• Recommended Jack For Raising Sunray Travel Trailer To Change Tire
  To lift your trailer I recommend using a jack like the Powerbuilt Unijack, part # ALL620471. This jack has a 6,000-lb weight capacity and the lift range is between 11 and 21 inches. Scissor jacks like part # JSC-30-IND that you referenced are not recommended for lifting trailers and are to be used for stabilization only. You want to make sure the wheel on the other side of the trailer is chocked and not able to move when changing the tire.
  view full answer...
• Weight Capacity And Dimension For Stromberg Carlson Scissor Jack
  The scissor jacks we offer have weight capacity much higher than the 387 lb you stated you need. All of the jacks we offer are designed for RV use and are intended to be mounted with the top plate. The largest top plate we offer is on the Stromberg Carlson Jack, part # JSC-30-IND. This has a round plate that measures 9 inches diameter. Most jacks have a much higher lift range than the 7.874 inches you stated you need. The # JSC-30-IND has a lift capacity of 5,000 lbs, and does require...
  view full answer...
• Recommended Stabilizers for RV Patios
  The only supports we have for a patio or slide out are the slide out supports like the Ultra-Fab # UF19-960001 or # UF19-960002 if there is a frame rail. You could alternatively use a scissor stabilizer jack like # TJSC-24 or # JSC-30-IND. The only other option I can think of is to use the Brophy Cable Camper Jacks - 57" Max Lift Height - 3,000 lbs - Qty 2 # CJ41 as a stabilizer. The Ultra-Fab Stackable Stabilizers for Small Trailers and Campers - 6,000 lbs - Qty 4 # UF48-979004...
  view full answer...
• Can Scissor Jacks Be Used to Level a 24 Foot Heavy Duty Car Hauler Trailer
  Scissor jacks # UF48-979002 are meant to support weight but not lift it like you said so these jacks would not be the best option for your trailer. Scissor jack # JSC-30-IND is listed as having the ability to raise, lower, and stabilize so you could use it with handle # JCH-1. Or use drill attachment # UF48-979005 to speed up the process.
  view full answer...
• Stabilizer Jacks Needed for a Military M101 A2 3/4 Ton Cargo Trailer
  When fully extended the Domar Trailer Jack, # TJ01RT, measures 18 inches from top of bracket to bottom of foot. We do not have a jack of similar construction that is longer but there are options. We carry 30 inch tall scissor style stabilizer jacks, # JSC-30 (single) and # JSC-30-IND (pair), that would most likely be a better fit with the 25 inch frame height on your Military M101 A2 trailer. This would most likely be the best option for you. We also have the stabilizer leg, # FSJ20324,...
  view full answer...
• Recommendations for Leveling a Toy Hauler on an Uneven Driveway
  Once installed from the pin to the bottom of the foot is going to be under 8 inches tall so that is probably not going to be enough lift for you. Instead you could use something like a scissor jack, # JSC-30-IND, that offers 30 inches of lift. We also have some handy levelers, # UF48-979051, that you can use under the jack for additional height. A similar product would also work well. Take a look at the stabilizers # UF48-979004. With these you get height adjustment from 11 to 17 inches...
  view full answer...