bing tracking image
  1. Camper Jacks
  2. Bulldog
  3. Pop Up Camper
  4. Teardrop Camper
  5. Travel Trailer
  6. A-Frame Jack
  7. Leveling Jacks
  8. Tongue Jack
Bulldog Powered Drive Trailer Jack - Drop Leg - A-Frame - 22" Lift - 4,000 lbs - White

Bulldog Powered Drive Trailer Jack - Drop Leg - A-Frame - 22" Lift - 4,000 lbs - White

Item # BD500200
Retail:$523.54
Our Price: $349.08
You Save: $174.46
Camper Jacks
This item qualifies for Free Shipping
Shipping Weight: 24 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
The best technical support and full camper jacks installation instructions. Great price Della Terra Travel Trailer camper jacks and expert service. East to West Della Terra Travel Trailer, 2022 camper jacks by Bulldog are available from etrailer.com. For expert service call 1-800-940-8924 to order your Bulldog Powered Drive Trailer Jack - Drop Leg - A-Frame - 22" Lift - 4,000 lbs - White part number BD500200, or order online at etrailer.com.
  • All Info
  • Reviews (368)
  • Q & A (0)
  • Photos

Bulldog Camper Jacks - BD500200

  • Pop Up Camper
  • Teardrop Camper
  • Travel Trailer
  • A-Frame Jack
  • Leveling Jacks
  • Tongue Jack
  • Electric Jack
  • 1 Jack
  • 22 Inch Lift
  • Bulldog
  • Bolt-On

This electric A-frame jack offers 22" of total lift. The drop leg has a spring-loaded pull pin for quick release. 3 LED lights allow easy setup at night. Built-in level included. Extends 6" in 28.5 seconds with 1,000 lbs of tongue weight.


Features:

  • Tongue jack positions quickly and easily with integrated drop leg
  • Powered drive provides quiet operation and efficient use of electrical power
    • No more hand cranking
  • Spring-loaded pull pin quickly releases the drop leg into position
  • Built-in level has springs for simple, accurate leveling
  • 3 LED lights make it easy to set up at night
    • Side-mounted spot lights are angled rearward to illuminate weight distribution brackets
  • 4" - 6" Overlap of tubes at full extension provides additional support for side loading
  • Easy-to-access on/off and retract/extend toggle switches make for simple operation
  • Corrosion-resistant, sealed, maintenance-free surfaces
  • Easily accessible emergency manual override in case of power loss
  • White housing with sleek design protects motor


Specs:

  • Bracket height:
    • 9-3/4" Retracted
    • 31-3/4" Extended
  • Total lift: 22"
    • Screw travel: 14"
    • Drop leg travel: 8"
  • Travel speed (w/ 1,000-lb tongue weight):
    • Extends 6" in 28.5 seconds
    • Retracts 6" in 25.4 seconds
  • Inner tube diameter: 2"
  • Outer tube diameter: 2-1/4"
  • Lift capacity: 4,000 lbs
  • 5-Year limited warranty


How to Determine the Lift Capacity You Need in a Jack

A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball. To do this, you'll need a jack with a lift capacity high enough to handle your trailer's tongue weight.


Tongue weight is the amount of weight that your trailer applies to the back of your tow vehicle. Typically, your tongue weight should be 10-15% of your total trailer weight (trailer + cargo). In other words, a 10,000-lb trailer would have a tongue weight between 1,000 lbs and 1,500 lbs. For a trailer this size, you would need a jack with a lift capacity of at least 1,500 lbs.


It's okay to have a jack with a weight rating that is higher than your trailer's tongue weight. In fact, a jack with a higher lift capacity should operate more efficiently, allowing you to spend less time cranking and more time camping.


Trailer and Camper Jack Lift

Every jack offers a certain amount of lift or travel. Screw travel is the distance the jack extends when you crank it (or toggle it to "extend" on an electric model). Some jacks include a drop leg for extra adjustability. On these jacks, you'll see the maximum extension of the drop leg listed in the specs as well. Adding the screw travel and drop leg travel together will give you the total lift. The total lift listed above can help you determine how high this jack will be able to raise your trailer.



500200 Bulldog A-Frame Jack with Powered Drive, 22" Lift, 4,000 lbs

Replaces Bulldog BD500185

Installation Details BD500200 Installation instructions

California residents: click here


Customer Satisfaction Score:


Customer Reviews

Bulldog Powered Drive Trailer Jack - Drop Leg - A-Frame - 22" Lift - 4,000 lbs - White - BD500200

Average Customer Rating:  4.8 out of 5 stars   (368 Customer Reviews)

This electric A-frame jack offers 22" of total lift. The drop leg has a spring-loaded pull pin for quick release. 3 LED lights allow easy setup at night. Built-in level included. Extends 6" in 28.5 seconds with 1,000 lbs of tongue weight.

by:

I have had problems with inadequate clearance between the lift gate of my Ford F150 and tongue jack motors on prior travel trailers. Some lifts allow the motor to be rotated sideways, but the bulky Lippert that came with my new Winnebago TT didn't. The Bulldog is made to be mounted either forward or sideways and has a particularly narrow body. Installation was a snap, and I drilled holes to rotate the bubble level to be aligned fore and aft. I opted not to use the clever Plunger Pin Kit which is mounted to be pulled from the side because when the unit is mounted sideways, the pin with its fairly stiff spring would have to be deployed and operated either fore or aft beneath the hitch or the tongue assembly. So I am using the original lynchpin assembly for the drop leg.

Now I have plenty of clearance between the Bulldog lift, the F150 drop gate and the propane tanks and cover.



by:

I am extremely pleased with everything about the purchase. The jack was described very accurately, I had a question before delivery about the fit on my R-Pod which was answered very thoroughly and the jack arrived on time. The installation was quick and easy. The jack operates very smoothly. The features of the LEDs, the quick pull pin for the drop foot and the bubble level are perfect for my application.



by:

The Bulldog Jack has been great!



by:

I installed this electric jack on my 3-horse bumper pull trailer. I'm using power straight from the truck's RV 7 wire hook-up. I, along with my family are so glad I installed this every time we hook up to the trailer. The adjustable leg is also an added benefit. I also purchased the termination box and this allowed for a superior installation by putting all the terminations in a water proof box versus open wire joints. Thanks etrailer for your support and your quality products.

Shorty S.

1/25/2018

Still lifting and lowering my trailer as designed. Having used the jack up to 6-8 times a month, I is withstanding the rigors of hauling. The little bubble level on top of the jack is pretty much useless in my application besides, the bubble is now about the length of the vial. Short of that, Id recommend to others. I am please with this product and sometimes wonder if I should have purchased the next size up.



by:

I have a 2007 14' V-noise extra wide and tall trailer, and the jack was needing to be replaced. I figured it was a good time to think about a powered lift option. After spending several days doing research, I determined that the Bulldog Powered Drive Trailer Jack, was the best product to meet my needs. etrailer has this product for the best price online, and offered free shipping, so for basically $100 more than a high quality none powered replacement jack, It was a no-brainer.

My wife and I installed the unit on my trailer that was still on my tow vehicle in less than 45 minutes, and everything we needed minus a weather proof inline connector was included. It was so easy to install, and looked so good after installation.

Because of the size and weight of my trailer, hooking and unhooking my trailer used to be a real chore for me, since I am older and have back problems. Then it was time for the true test, dropping the trailer for the first time.

WOW! The spring loaded pin for the drop leg made it so easy! No more need for the several wood blocks we needed to lug around. Also it was now dark, so I turned on the lights. What a difference! The video does not do the lights justice. They clearly illuminate the rear of the tow vehicle, and front of the A-frame of the trailer.

Then, by simply pushing the weather proof button, a chore I used to dread, that left me sore and sweaty, was now effortless! Quiet, smooth operation, and built in stops for extra protection.

Very solid high quality construction, with all the features you need and want. The all weather design, powder coated metal parts make it easy to understand the reason why the manufacturer offer a 5-year warranty.

I am only left with one question...why did I wait so long to buy this great product at the lowest price from Etrailer?



by:

I purchase this item to replace a 12 year old power jack. I’m spoiled and I’ll never go back to a manual jack. The jack feels and looks like a high-quality unit. All hardware was individual packaged. Installation went smoothly following the excellent directions.

I’ve run the jack up and down a couple of times and it functions smoothly and quietly. The drop-leg is an excellent design.

I look forward to many years of service from this jack.

Hb

5/31/2019

I have found a flaw in the jack. The metal rod used to release the foot is made from pretty junky metal. It got hung-up in my chains while I was lowering the jack and bent. The deflection was pretty minimal - I caught it very quickly - yet when I bent the long leg of the rod back, it broke off. For the price, I’m not impressed with this aspect of the jack. It has rendered the [] leg useless as I had to secure it in place so it didn’t fall out.



by:

The trailer tongue jack arrived undamaged and fits perfectly.



by:

The Bulldog Powered Trailer Jack was a perfect fit for my Jayco White Hawk travel trailer. Installation was easy and the switches are easy to operate and are clearly marked. The customer service reps were awesome!



by:

I bought an electric trailer jack. The price was fair, shipping was fast, and item was exactly as described.

Great service!



by:

I love my trailer jack. I was so tired of cranking and this is so easy. Just what I wanted!



by:

Easy to install, works well. Used it to replace another jack that died after 5 years. It would be good if they included the electric hook up instructions with it. If I didn’t have the earlier jack connections I would have had a much more difficult time installing.



by:

Quick easy installation, all hardware provided, lights are just enough to see what your doing, only reason it's not 5 stars is because I've used it long enough to test. But it will be used daily, so testing won't take long, oh by the way shipping was 10 stars, haven't had a package arrive like it was supposed to in long time. Thanks everyone involved etrailer!



by:

Shipped on time, easy to install, great product and service, very happy.

Trevor J.

1/8/2019

Very good



by:

Easy installation and works great



by:

It has been perfect. It gets used daily and never misses a beet.



by:

Was used for our camper. Haven't used it at this time,but pretty certain it will be the best product ever purchased.



by:

Alonzo

3/13/2022

I love it Great product



by:

great product the package was in bad shape when delivered by UPS hope everything is there.



by:



by:



by:



by:



by:



by:



by:


25
367
Show More Reviews

See what our Experts say about this Bulldog Camper Jacks

  • Which Solar Panel Should I Use to Keep Battery Charged That Runs Trailer Jack
    You can use the Go Power Eco Solar Charging System with Digital Solar Controller - 10 Watt Solar Panel # 34273836 if you use the battery for any other electronics on the trailer. This will provide 3.42 amp hours of charging power and will allow you to make sure that you're always able to use your Bulldog # BD500200 jack even if the battery has been sitting unused for some time. If you just use the battery to power the jack, the 2.5-Watt Solar Battery Charger # PTW2997 might be a more...
    view full answer...
  • Troubleshooting A Bulldog N500200 A-Frame Jack That Only Manually Works
    Since you were able to manually lower your Bulldog Powered Drive Trailer Jack # BD500200 it leads me to believe that the gears are fine and the issue lies with the motor. I recommend first checking the power to ensure it's getting a full 12v and that the ground is properly attached to the bare metal of the trailer frame. If power/ground isn't the issue then the motor most likely needs to be replaced.
    view full answer...
  • How to Wire the Bulldog Powered-Drive Trailer Jack # BD500200 on a Trailer with No Battery
    The Bulldog Powered-Drive Trailer Jack, item # BD500200, only has one wire, the power wire. This jack attaches to ground through the mounting hardware and the trailer frame. When wiring the jack to your 7-Way trailer connector you will need to make sure that the ground wire from the 7-Way trailer connector is attached to the trailer frame to provide ground. You will then attach the power wire to the 12 volt accessory circuit inside the 7-Way connector or splice into the wire the is attached...
    view full answer...
    Image 1 for
  • Why Wouldn't 12 Volt Accy Circuit of 2022 Ford F-150 be Active
    Your 2022 Ford F-150 does have the 12 volt accessory circuit on the 1:00 pin but your truck needs to sense a trailer connection for the circuit to activate. A lot of people with your truck struggle with this feature as sometimes trailers with LED lights create issues with the 12 volt circuit activating or not. For a lot of people it's just simpler to bypass the factory wiring for this circuit by running 10 gauge wire like part # 10-1-1 from battery to the 7-way through a breaker # 9510.
    view full answer...
  • Can a Powered A-Frame Jack Use Trailer Wiring 7-Way as Power Source
    As long as the 7-way on your 2011 Toyota Tundra has the 12 volt circuit active and you wire the # BD500200 to the 12 volt circuit on your trailer 7-way (the 9:00 pin), the jack would work. It's typically preferred to power the jack off of a battery, but this method will work as well.
    view full answer...
    Image 1 for
  • Troubleshooting Bulldog Power Jack BD500186 that Drains Trailer Battery After Several Uses
    First you will want to use a circuit tester like part # PTW2993 to test the 12 volt accessory circuit of your 7-way. There should be voltage on this circuit, if not check the fuses of your tow vehicle as most likely one has blown. This is probably the issue. If there is voltage there you will want to test the wire that leads to the battery with the trailer connector connected but the wire disconnected from the battery so that you can tell if the voltage on the circuit is coming from the...
    view full answer...
  • Recommended Electric A-Frame Jack for a 2016 Keystone Hideout 29BKS
    For your 2016 Keystone Hideout 29BKS, I recommend going with the Bulldog Powered Drive Trailer Jack - Drop Leg - A-Frame - 22" Lift - 4,000 lbs - White # BD500200. This includes 3 LED lights making it easy to set up at night and the built-in level has springs for simple, accurate leveling. With the drop leg and 22 inches of lift, it is an ideal choice for just about any trailer.
    view full answer...
  • Powered Bulldog Jack Recommendation for a 2011 Dodge Ram 1500 to Help Install Spring Bars of WD
    The Bulldog Powered-Drive Trailer Jack # BD500200 would do well as a powered jack for your 6500 lb trailer. It would also work to jack up your trailer to install the weight distribution system you have. This jack can lift trailers with up to 4,000 lbs of tongue weight. Typically the tongue weight of a trailer is 10-15% of the total weight of the trailer. So when your trailer is empty you would have a tongue weight of 650-975 lbs which the # BD500185 would make easy work of.
    view full answer...
  • Shaft diameter on the Bulldog Powered-Drive Camper Jack # BD500200
    The Diameter of the main tube is 2-1/4 inches on the Bulldog Powered-Drive Camper Jack, item # BD500200. There are 6 holes in the mounting plate for either 2-1/2 inch mounting pattern or 3 inch mounting pattern. These are the standard bolt patterns used by most trailer manufacturers.
    view full answer...
  • How Does Bulldog Powered A-Frame Jack Raise and Lower Manually
    Your Bulldog powered A-frame jack part # BD500200 would have come with a manual override lever like the part # BD500203 which you could use to manually raise and lower the jack as needed. If you check out the 5:36 mark of the review video I attached for this you'll see how the manual crank is used once removing the cap on the top of the jack.
    view full answer...
  • Dimensions for Installation of a Bulldog Electric Powered Trailer Jack with Propane Tanks on Tongue
    The distance from the top of the mounting plate to the bottom of the housing on the Bulldog Powered-Drive Trailer Jack, # BD500200, is 13 inches.
    view full answer...
  • Why Wouldn't Trailer Jack Work Connected to Power Source of 7-Way
    It's possible the 12 volt accessory circuit of your 7-way doesn't have the amperage required but it's also possible the circuit on the truck isn't active at all as that's a pretty common situation. Running 10 gauge wire from the positive terminal of the battery with part # 10-1-1 through a breaker like part # 9510 would solve either problem.
    view full answer...
  • How To Maintain Charge In Trailer Battery That Will Run A Powered Trailer Jack On A Pace Trailer
    You will want to use a standard 12 volt deep cycle trailer battery to operate the Bulldog Powered-Drive Trailer Jack, part # BD500200. You will NOT want to use a trailer breakaway battery. The breakaway battery is not designed to power other trailer accessories or lighting, it is just designed to operate the breakaway system. To keep the trailer battery charged you will need to run a 10 gauge power wire like the, part # 10-1-1, from the 12 volt power pin (# 4 terminal at 11:00 position)...
    view full answer...
  • Wiring Options for Installation of a Bulldog Powered-Drive Trailer Jack # 500185
    Ideally you would wire the Bulldog Powered-Drive Trailer Jack, part # BD500200, to a separate battery. Normally trailers with powered jacks have an auxiliary battery that is used to power accessories. If there is not a separate battery on your trailer, you could power the jack from the 12 volt power source in your 7-pin trailer connector.. Here is how you would wire it to your 7-pin connector: On the 7-pin connector that is on your tow vehicle there should be a red or black wire that...
    view full answer...
  • Will a Bulldog Powered A-Frame Trailer Jack Fit a 2013-2014 Heartland North Trailer Travel Trailer
    To determine if the Bulldog powered A-frame trailer jack # BD500200 will fit your North Trailer 32buds, you will need to measure from the center of the jack hole opening back to that storage cover on the tongue. If it is more than 4 inches then the jack will fit. Any more than less inches and it will interfere with that cover on the tongue. The mounting pattern for the bolts will be the same as the manual jack on the trailer now.
    view full answer...
  • Troubleshooting Powered A-Frame Jack that Won't Raise or Lower Manually or Electrically
    Sounds like the inner screw of the Bulldog Powered Trailer Jack part # BD500200 that you have is damaged which would require the jack to be replaced. If it's less than 5 years you might be able to get it warrantied but otherwise you'd need to get a new jack.
    view full answer...
  • Will Bulldog Powered A-Frame Jack BD500200 Work Well To Replace 2,000 lb Trailer Jack
    The Bulldog Powered Drive Trailer Jack # BD500200 that you referenced will work great on your trailer. It has a higher lifting capacity than your current jack and would have no problem lifting your trailer's tongue weight. If your trailer weighs 3,500 lbs that means the tongue weight is around 350 lbs. This jack has a 4,000 lb tongue weight capacity so it would barely notice your trailers's tongue weight. It also is designed to attach to the same 3 bolt mounting flange that your trailer...
    view full answer...
  • What is Quietest Electric A-Frame Trailer Jack
    We've found that the Bulldog trailer jacks like the part # # BD500199 (Black) or # BD500200 (White) are the quietest so either of these would be your best option.
    view full answer...
  • How to Maintain Electric Jack Ground Connection if Using the Jack-E-Up Quick Disconnect
    So the question is are you wanting to use this device because your tailgate hits your jack or because you have bent the bottom of jacks in the past? Because if it is a tailgate issue there is a much simpler solution; a longer ball mount. But really the cost is about the same so 6 in 1, half a dozen in the other. It appears that the device is made of steel so when your jack is in place it shouldn't lose the ground connection. You may need to scrape away any powder coat on the device though...
    view full answer...
  • A-Frame Electric Trailer Jack for Car Hauler
    The Bulldog Powered Drive Jack part # BD500200 would be an excellent choice for your car trailer. It has a 4,000 lifting capacity which would easily handle the tongue weight capacity of your trailer and would make life much easier than hand cranking your current hand winch!
    view full answer...
  • Replacement Jack Recommendation for Damaged Bulldog Powered A-Frame Jack
    That is a really frustrating way to damage a jack. I wish we had the components you'd need to fix your Bulldog part # BD500200 that you referenced but Bulldog basically only offers replacement switches for this jack. You are going to need a new jack. I think the best value for an A-frame tongue jack is the Stromberg Carlson # SC63VR which is rated for 4500 pounds of tongue weight. This is 1000 pounds more than other models, and even though you may not need this much capacity, you will...
    view full answer...
  • Recommended Heavier Duty Upgrade For FIC 3500 Electric A-Frame Trailer Jack
    Electric A-frame trailer jacks often have the same bolt pattern, yes. Just keep in mind that a higher-capacity jack doesn't necessarily mean more speed, it's all about the jack itself. For example, the 3,500 lb Ultra-Fab Electric A-Frame Jack # UF38-944017 extends 6" in 25.3 seconds (with 1,000 lbs of tongue weight), while the 4,000 lb Bulldog Trailer Jack # BD500200 extends 6" in 28.5 seconds (with 1,000 lbs of tongue weight). That said, since you mentioned wanting a heavier-duty jack,...
    view full answer...
  • Width Of Head On Bulldog Powered Drive Trailer Jack BD500200
    I had our warehouse measure the Bulldog Powered Drive Trailer Jack - Drop Leg - A-Frame - 22" Lift - 4,000 lbs - White # BD500200 and it measures at 4-1/4" wide as shown in the included diagram. I included a video of the # BD500200 for you to take a look at.
    view full answer...
    Image 1 for
  • What is the Lifting Capacity of the Bulldog Powered-Drive Trailer Jack, # BD500200
    On the Bulldog Powered-Drive Trailer Jack, # BD500200, 4,000 pounds is the lift maximum. So, if it mounted on the trailer tongue and the tongue weights is up to but not exceeding 4,000 pounds, the jack will lift it. There is no static capacity listed (how much it can hold just sitting) so, in this case, the static capacity will also be 4,000 pounds. I have included a link to a video featuring this jack.
    view full answer...


< Previous



Do you have a question about this Camper Jack?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Lindsey S
Edited by:
Lindsey S
Employee Jacob T
Video Edited:
Jacob T
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Mike S
Updated by:
Mike S
Employee Isabelle B
Updated by:
Isabelle B
Employee Noah M
Updated by:
Noah M
Employee Cole B
Installed by:
Cole B
Employee Shelly K
Written by:
Shelly K

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.