Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Wireless camera plugs into your factory pre-wired Voyager WiSight plate for real-time, crisp video while backing into the campsite. Built-in microphone and speakers help you communicate with a friend outside your RV as you back into a tight space.
Features:
Specs:
Note: Not compatible with first generation WiSight technology products.
After a long drive to the campground, the last thing you feel like doing is maneuvering your RV into a tight campsite space - especially in the dark! This wireless backup camera system plugs into your RV's pre-wired Voyager WiSight technology plate to give you peace of mind that you'll be able to back up more safely, even at nighttime or in other low-light conditions.
The WiSight 2.0 technology digitally locks the camera and monitor together, transmitting strong, interference-free signals up to 60'. This means that you'll have sharp, real-time video footage whether you're on the road or at the campsite, and you are less likely to have interference from smartphones, routers, and other devices.
Tired of yelling back and forth to your partner out the window as you're struggling to back in at a good angle? The built-in microphone on the camera and integrated speakers on the monitor allow a spotter to relay information or instructions to you from outside your vehicle. This makes it much easier and safer for you to back up in a crowded campground.
No more wondering if you're getting too close to another vehicle, tree, curb, or your kid's bike while backing up. The rear assist marker lines take out the guesswork to avoid collisions and safely maneuver your RV. The lines are displayed in 3 different colors (green, yellow, and red) to help gauge the proximity of objects within your view.
And depending on your camera setup, this system allows you to add up to 4 cameras (additional wireless cameras sold separately) and view 1, 2, or all 4 angles simultaneously. This is great for when you're backing up at the campground or changing lanes on the highway, as it'll let you keep an eye on everything going on around your RV without needing assistance from others.
And because this camera has 14 infrared LEDs, you'll have a clear picture even in low-light conditions at dusk or in complete darkness at night. These LEDs provide ample illumination up to 30' should you arrive at the campsite after dark and need to back up into your parking spot.
If there's a torrential downpour, or if you just simply need to wash your RV, the waterproof, IP69-rated camera will be protected against close-range, high-pressure spray downs. And if you're driving through rough country roads, the camera will resist dust and dirt from building up or getting inside.
This camera system includes 2 different mounting options for the monitor, depending on how you want to display it on your RV's dashboard. If you want to be able to re-position the monitor later on, stick the camera onto the dashboard with the included suction cup. Or, if you want a more permanent mounting solution, drill one of the Voyager pedestal mounts (VOSHD4MNT, VOSHD6MNT - sold separately) into the dashboard. To power the monitor, simply plug it into a 12-volt light or cigarette lighter outlet.
This wireless camera is designed for RVs that have a factory-installed, Voyager WiSight pre-wired plate, which makes installation incredibly easy. All you'll need to do is plug the camera directly into the socket on the pre-wired plate - drilling isn't required. Then bolt it down with your OEM screws.
Customer Satisfaction Score:
92% were satisfied with this product
8% of customers were not satisfied
Ratings & Reviews
Brooke M.
3/3/2025
What kind of truck do you have, Warren? I am thinking this issue might be PWM related, and if your truck is 2019 or newer, then I have two parts to recommend. Part # VGR74VR is a hardwire option, and part # VGR64VR plugs in to the back of the camera with the CEC connection. Let me know!
James
6/29/2024
Use the camera all the time traveling. One nice thing is the camera is powered from the lights so you always know your lights are on to make camera work. I would recommend this camera. I have only great things to say about the product and etrailer support
Katrina D.
4/4/2024
Ugh, it is always annoying when newer technology has poor quality. Lets see, the system can lose signal due to interference inside or outside of the vehicle. I have a photo attached with the notice of information on signal interference. Do you have WiFi in the vehicle, and how far is the camera from the monitor? For the vibrating, I suggest tightening the part of the mount [highlighted in photo] or moving the monitor around to find a different spot on the windshield where the mount will be more stable. Another option I have heard works for some neighbors, is that you can also try cleaning the windshield and suction cup and then placing the mount and letting it sit overnight to see if it makes a tighter seal on the glass. Try this out and let me know if it helps or not. I would be very happy to further assist you if this troubleshooting does not work out.
Jenny N.
4/1/2023
We have had others who have also mentioned that they were not able to pair the monitor to the control unit. Please see the link below to an Ask the Expert question that covers steps to make sure that the monitor is being paired correctly. If you follow these same guidelines and are unable to pair it, please contact us back.
Helpful Links
Mike
2/12/2025
Its been great. Love the install, was very easy. Worked right from the start.
Jameson C.
2/12/2025
Do you have a question about this RV Camera System?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
John
1/28/2026
I have a 38’ toy hauler trailer. I won’t travel without it. I travel to FL every year from PA. It works great for the most part but it has times where it freezes up or loses contact with the antenna for a few seconds. Mostly near big cities where there must be a lot of interference. I have my monitor lower on my dashboard. It would probably work better if I could mount it higher it would probably get better results. The monitor is kinda big so that is why I don’t mount it on top of the dash board. I have had contact a few times with the techs at etrailer and gotten great help and advice on different occasions.