Replacement Drop Leg for Bulldog Round Trailer Jack or Powered Drive Camper Jack

See what our Experts say about this Bulldog Accessories and Parts

• Replacement Drop Leg for a Bulldog Powered Trailer Jack
  Yes, the replacement drop leg is part # BD500190, and is what you need for your Bulldog powered jack # BD500187. I called our representative a Bulldog to confirm as well. It will include the drop leg and pin. It's always a good idea to double-check if any of the other components are damaged, or attachment points show any signs of stress from the incident. If that's the case, the jack may need to be replaced. I included an installation video and information article for you too.
  view full answer...
• Replacement Drop Leg for Bulldog Powered Drive Trailer Jack # BD500199
  I checked with Bulldog and for the Bulldog trailer jack part # BD500199 that you referenced the correct replacement drop leg is the part # BD500190.
  view full answer...
• Availability of Replacement Drop Leg for Bulldog BD500188 Powered Trailer Jack
  Sure, I'd be happy to help you with that! You'll need part # BD500190, which is a replacement drop leg for the Bulldog # BD500185, # BD500187 and # BD500187.
  view full answer...
• Replacement Drop Leg and Pin Kit Recommendation for a Bulldog Powered-Drive Trailer Jack # BD500188
  Yes, the Replacement Drop Leg and Pin Kit for Bulldog Powered-Drive Camper Jack # BD500190 that you referenced is the correct replacement part for your Bulldog Powered-Drive Trailer Jack # BD500188.
  view full answer...
• Replacement Drop Leg For Bulldog 4,000 A-Frame Trailer Jack
  The replacement drop leg and pin kit we offer is part # BD500190 and is designed for Bulldog Powered-Drive Trailer Jack for an A-Frame part # BD500187. The outer diameter of the tube is 1-3/4 inches. It might be a good idea to check and make sure no other components are damaged on your jack. If you find other items are damaged the jack may need to be replaced. I have attached a link to a helpful article about trailer jacks you can check out.
  view full answer...
• Recommended A-Frame Trailer Jack with Shorter Retracted Bracket Height
  We do have a large amount of A-Frame jacks available that will work nicely on your enclosed Wells Cargo Trailer. The closest option I could find for providing a shorter retracted height while maintaining the extended height of your existing jack is the Bulldog Round A-Frame Jack - Topwind # BD155028. This jack has a bracket height of 8-3/8 inches when retracted. The bracket height is then 23-3/8 inches when fully extended, offering a total lift of 15 inches. It has a outer tube diameter...
  view full answer...
• Can Leg on 4000 lb Powered Trailer Jack Be Replaced
  If it's the drop leg like # BD500190 that's bent, you certainly can replace it if it's not bent to the point where you can pull the pin and slide the drop leg out. The # BD500190 would be the proper replacement for a Bulldog # BD500185, # BD500187, and # BD500188 powered A-Frame jack, or a jack that would accept a 1-3/4 inch diameter drop leg. If the leg that's bent isn't removable, then you'll need to replace the jack. I'd recommend the Bulldog # BD500199 which has a 4000 lb lift capacity...
  view full answer...
• Replacement Parts for Bulldog Powered-Drive Trailer Jack
  There are few replacement parts available for the Bulldog Powered-Drive Trailer Jack # BD500187 referenced in your question, but they may not be what is needed to completely fix the damaged parts on your existing jack. For the Replacement Drop Leg and Pin Kit, you will use # BD500190. We also have replacement switches for the extension/retraction and light, parts # BD500363 and # BD500362. These are currently the only replacement parts available for the Bulldog Powered-Drive Trailer...
  view full answer...
• Replacement Drop Leg Extension for Lippert Power Jack with Additional Height Needed
  The Lippert Electric Trailer Jack with Footplate - A-Frame - 18" Lift - 3,500 lbs - Black # LC285318 has a drop leg available that will give an extra 4-1/2 inches with # LC405217.
  view full answer...
• A-Frame, Zinc Coated, Sidewind Jack with Drop Leg Option Recommendation
  Yes, the Drop Leg for etrailer and Ram Jacks - 13-1/4" Tall - 5-1/4" Diameter Footplate - Zinc # JF-1005H-Z that you referenced will work with the Round A-Frame Trailer Jack - Sidewind - 15-5/8" Travel - 5,000 lbs # TJA-5000S-B. Check out the review video I attached.
  view full answer...
• Recommended Replacement Drop Leg for a Bulldog Tongue Jack
  It won't because the grove in the leg is different enough that they aren't compatible, however I have another option that will. It is the Replacement Drop Leg for Bulldog Round Trailer Jack or Powered Drive Camper Jack item # BD500190. This is an exact replacement part. The Replacement Foot for etrailer or Ram Electric Jacks item # EJ-3520-FT you were looking at will not work on your jack as it was designed to be use with the item # EJ-3520-BBX or item # EJ-3520-WBX jacks.
  view full answer...

Do you have a question about this Accessories and Part?