Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Replaces the bubble level for the top of your Bulldog 4,000-lb powered-drive camper jack (BD500199 or BD500200). Includes mounting screws.
Features:
Fits:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello, neighbors, Steve here with etrailer.com. Today we're looking at a replacement bubble level assembly with the included screws for your BULLDOG 4,000-pound powered-drive camper jacks. So folks, this does replace the bubble level for the top of your BULLDOG 4,000-pound level jacks. You got the pieces here to assemble it, (level snapping) a nice foam backing, and everything, and the installation screws that you see before you. Very simple install. I'll fill some dimensions up here with an image, inch and a half, center to center, no matter which direction you go on the screw line holes, and overall diameter, it is 2 1/8 inches wide on the whole assembly.
So folks, again, a simple replacement bubble level assembly with the screws for the BULLDOG 4K powered-drive camper jacks. I'm Stephen. Thanks so much for watching.
Average Customer Rating: 4.4 out of 5 stars (41 Customer Reviews)
Replaces the bubble level for the top of your Bulldog 4,000-lb powered-drive camper jack (BD500199 or BD500200). Includes mounting screws.Etrailer had exactly what I was looking for at a reasonable price. I am a repeat customer and have been highly satisfied with each purchase. There was excellent communication from the etrailer staff every step of the process and follow through after product delivery to make sure I was satisfied. Keep up the great work.
It was great no fitting or messing with it.
EXCELLENT SERVICE AND STAFF. WILL BE DEALING WITH YOU GUYS AGAIN
I’m replacing a built in level that failed on my bulldog power jack. Most web criticisms are they crack in direct sunlight. Mine has been covered with a vinyl bag since New because the electrics short out with moisture so that’s false. I like etrailer because you always have what I want but your delivery time is terrible. For an item this small it should have been here quicker
My original level blistered, or shattered, I'm assuming from heat. I had also purchased a cover (UF38-944020) that basically rests right on top of the level. I contacted etrailer and they sent me a new level. I have a foam insulator between the level and the cover now.
Product is great while new, this was a replacement due to cracked plastic lens and rusted out screws. you should replace with stainless steel screws.
This should have been a warranted item from Bulldog, they said no.
Delivery from etrailer was fast and easy,and they have a great line of products.
This item was lost in the system when bulldog did their thing and replaced with another item number. The new number was incorrect for my application. However, lisa at etrailer did an exceptional amount of work in finding the correct part with the correct number and the item fit perfectly. Great people to work with.
This was a direct replacement for my broken level that froze over winter. Easy to install.
Easy to install, original level had broken. Pay attention to making sure your trailer is level when you install. Also would be easy to get it wrong if you tighten screws unevenly. Good price, quick shipping!
A simple item that fits into the power level jack. If used in non-freezing zones, the item will last. Sadly, in northern zones moisture penetrates the base leading to cracking and ultimately broken. This is my third replacement. I have not solved the problem of moisture penetration.
Original was broken. So I replaced it. But the bubble is much longer than the lines so accuracy suffers. It is there to get you close. Now if the LED also lit up this level, it would have been well thought out. Of course it does not,
Very poor product. Just like the original level that came on the jack, this one died in six months. It is just not designed to handle the sun working on it on a daily basis. Don't waste your $ for this part.
Perfect replacement for our Jack. The customer service at etrailer.com is outstanding! Courteous employees, prompt responses and follow up to make sure you are a happy customer.
products were easy to find, order process good and shipping and delivery were very satisfactory. will use etrailer again.
I purchased a camp trailer with an electric trailer jack that had a damaged level. The package arrived quickly and fit perfectly.
Very easy to install need to remove in the winter so the bubble does not freeze and break back to normal
Product is an exact match to the original. Knowledgeable staff, friendly and very helpful. Will definitely order from E-Trailer again.
One call; part identified, paid for, and shipped pronto. Received, installed; could not be happier. Will come back to this site as my main source for trailer needs.
Product was exactly as described and exact replacement. I wish I would have changed it sooner. Removing the old screws is difficult. I suggest replacing the screws with stainless screws.
Drained out after a year. Trailer stays in a heated garage to so not because of freezing.
fits perfect! Excellent product and ser vice!
Prompt service,good product,and the most reasonable shipping I could find
Jim D.
6/15/2017
Still working great
Level is perfect replacement for the broken one.
Pretty simple, seems to work fine.
Rusty
8/2/2016
Bubble is still there after one year.
In less than a year the liquid evaporated and the level is useless. before that i really liked it, it was great.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Allen
5/30/2020
Perfect fit, my previous level had gotten water under it that froze then the level broke. Now I remove it from the trailer lift during the winter months to avoid the same thing with my replacement level.