Summer Starts Here - Save up to 70%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This electric jack offers 22" of total travel and features an LED courtesy light for simple nighttime operation. Crank included for manual override in case of power failure. Extends 6" in 28.1 seconds with 1,000 lbs of tongue weight.
Features:
Specs:
A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball. To do this, you'll need a jack with a lift capacity high enough to handle your trailer's tongue weight.
Tongue weight is the amount of weight that your trailer applies to the back of your tow vehicle. Typically, your tongue weight should be 10-15% of your total trailer weight (trailer + cargo). In other words, a 10,000-lb trailer would have a tongue weight between 1,000 lbs and 1,500 lbs. For a trailer this size, you would need a jack with a lift capacity of at least 1,500 lbs.
It's okay to have a jack with a weight rating that is higher than your trailer's tongue weight. In fact, a jack with a higher lift capacity should operate more efficiently, allowing you to spend less time cranking and more time camping.
Every jack offers a certain amount of lift or travel. Screw travel is the distance the jack extends when you crank it (or toggle it to "extend" on an electric model). Some jacks include a drop leg for extra adjustability. On these jacks, you'll see the maximum extension of the drop leg listed in the specs as well. Adding the screw travel and drop leg travel together will give you the total lift. The total lift listed above can help you determine how high this jack will be able to raise your trailer.
California residents: click here
Average Customer Rating: 4.8 out of 5 stars (369 Customer Reviews)
This electric jack offers 22" of total travel and features an LED courtesy light for simple nighttime operation. Crank included for manual override in case of power failure. Extends 6" in 28.1 seconds with 1,000 lbs of tongue weight.
Excellent Jack. Slow moving but that is due to high torque. Well made, attractive design. Highly recommended!
Solved the problem of busting my knuckles on the propane tanks while cranking the old jack.
Great jack. Just what I needed to allow my tailgate to open while hooked up to my travel trailer
I received my new Bulldog jack fast after placing my order. It took me about 20 minutes to remove my old one and install the new one. This Bulldog jack is quieter than the previous one and moved up and down real well.
I needed to hook up in the evening before I left for my camping trip and will say the nice led light this jack comes with gives a very nice lighting to be able to see everything needed to hook up my trailer to my truck. I hope this one lasts much longer than my previous one. Time will tell but so far I really like the way this Bulldog jack operates
I just installed this unit. It was so simple and easy to install. It took about 30 min ( minus the 2 hr it took to grind out 20 year old bolts from the manual jack). I love the sleek look of the unit. Gave it a test run and it's so quiet. I have a bumper pull horse trailer with a small living quarters and it lifted and retracted with no issues. Very happy with this product.
The jack has worked well on my 24' enclosed car trailer.
It's a little slow going up which is to be expected with the weight of the car and trailer.
David
8/9/2023
Great, very happy with the purchase.
Fair price. Quick shipping. Arrived as promised.Installation video was very helpful, as were the instructions. Add the drop leg BEFORE bolting the unit in place. Otherwise, you need to raise the tongue to get the leg underneath. Simple install.
Bought this to replace the original jack on our R-Pod 195 that water got the best of. I was able to mount it in the sideways option and now we can drop the tailgate while still hooked up. It's the cat's meow!
A well built and quiet running product. We had Bulldog unit on our old trailer. My no name factory tongue jack on our new trailer lasted 17 months before the motor died. The BD unit is more expensive but it's built to last.
What a dream come true! This electric jack replaced my old hand crank unit on my 24 foot travel trailer.
Installation was very simple with the one wire hook up. What I like most about this jack is the drop leg. This jack extends so far that now I won't need to bring all my boards (for lifting height) with me just to get the trailer off of the hitch.
Not included was a ring terminal for attaching the wire to the battery, but thats okay because I had one laying around. Another thing that I did, was that I found some flat washers to use between the head of the mounting bolt and the jack. The provided lock washers looked like they'd pull through the mounting plate.
Just be aware that the motor unit on the jack protrudes to the back and front of the center line of the jack tube. I'll have to deal with some clearance issues between the jack motor and my propane tanks. This isn't a flaw with the jack, just a quirk with my particular trailer setup.
Its a very nicely built jack, feels solid and heavy in your hand. Its powerful too. It had no problem picking up the trailer and my 2007 F-150 in order to install my weight distributing bars.
Heather A.
6/11/2018
If you need a ring terminal to wire this jack part # BD500187 I recommend part # DW05705-1 for a 3/8 stud size, part 44-5310A for a 3/16 stud size or part 44-5356A for a 5/16 stud size. All of these ring terminals will work with 12-10 Gauge Wire. Deka 10 gauge wire part # 10-1-1 will work well if you need extra wire.
Helpful Links
Accessories-and-Parts/3M/44-5310A.html
Accessories-and-Parts/3M/44-5356A.html
Bryan
6/10/2019
Jack still working great after one year. Hooking up the trailer is so easy. I don’t Miss that old hand crank at all.
great customer service, quick delivery. Lauren A is allways helpful goes out of her way to help.
Working great after a year. It's nice to just push the button to raise the trailer tongue.
My customer loves it. Just what he needed for his equipment trailer.
Mike
5/28/2023
Still working like a dream ! Very happy..
So far, so good. Hopefully will outlast the terrible SmartJack it replaced.
ordering and free delivery was nice, arrived in good condition, easy to install, justed installed and works well, beats raising and lowering trailer by hand, 26 ft enclosed trailer
Easy install! The wiring is a bit bigger in diameter than I was expecting, so larger heat shrink butt connectors would have been helpful, but we got the job done! Excited to use this instead of hand-cranking the trailer on and off the truck 3-4 times a week!
Great product and easy install! Customer service great with placing order and follow up!
Quality product fit my needs easy ordering decent shipping time
Michael
7/27/2023
Still working as expected!
Bull dog jacks are the best.
Very happy with the performance of our Bulldog. The name fits. What a difference as compared to a manual jack. Well worth the modest expense, and installation was hardly rocket science. The built in light is a great feature for evening set ups. A minor tip - cover the motor during outside storage to limit the risk of water seepage into the unit. Our experience with etrailer was also very positive.
Rod B.
5/10/2020
Our Bulldog performs like it just came ouu u t of the box. The Full Monty!
The Bulldog Powered-Drive Trailer Jack - Drop Leg - A-Frame - 14" Lift - 3,500 lbs - Black was very quick and easy to install. Seems to work great. This is on a small 3700 lb travel trailer and lifts with ease. Need to determine how far to ext and retract as not to blow fuses but it works great so far. Can't wait to take it out and see how it performs camping.
Bill P.
3/16/2018
Working great with no problems for a year
It's been a year now, and my jack is working just like it did a year ago when I installed it on my 32ft wildwood camper. Still smooth motion up and down. I really enjoy having it. Makes camping so much easier. One of the best purchase decisions I have made! I do have a cover I put on it when I bought it new, so it has never been wet, or exposed to sunlight. I can work the buttons on the jack through the cover, so I never take it off. I do love the jack. Thank you guys so much for good quality at a great great price!
Roger M.
5/6/2020
Its been a year and still woring as good as day one. Love it!
The product came well packaged... on the second shipment! The first one was open and not good looking. Stuff happens, and it was corrected very quickly by etrailer reshipping a perfectly new Jack. And it works good and is really strong. Very happy with etrailer service and the Bulldog product.
Gilles
1/24/2020
After a year, product works as it should, I am very happy.
Jack arrived in 2 days. Fits great and easy to install. Jack head only sticks out 3 inches from front of tube, closer then most. This allows me to open tailgate without hitting jack. I use an extended reciever for more clearance. Light on jack also shines in the bed of truck.
Dave S.
10/9/2018
Works great. No problems. Very nice jack.
Shipping was fast and amazing as always. This jack bolted right on to my 2019 175LHS Hideout with the supplied hardware. Wired right up. I am excited about the drop leg. Will be nice to not have to run the jack all day. So far grat stuff. Would highly recommend.
Timothy G.
12/26/2021
Great!!
Great jack. I quickly found out that this jack also blows fuses if retracted completely, which is apparently common. It is a little slower than the Super Jack it replaced, but I like the added features such as: multiple mounting holes for mounting in different positions, LED lights, the switch is labeled up and down (my old jack wasn't, so if you were near the top and hit the switch the wrong way, you were replacing 20A fuses), and the adjustable drop leg. I am not crazy about the gold/bronze drop leg, but nothing a can of paint cant fix.
I installed it in just a few minutes as it is simply three bolts and one electrical connection. I ordered the jack on Saturday and it was at my house on Tuesday with regular ground shipping. Further, I received constant email updates on where the shipping process was. Great service again from etrailer.
Patrick B.
12/12/2012
The blown fuses can happen when the motor is over-loaded either by over-extending or over-retracting the jacks. A helpful trick is to mark the leg at stop points with a paint pen or scratch tool. That way you know when the jack is all the way up or down and you do not go too far and blow the fuse.
Do you have a question about this Camper Jack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jimmy J.
7/18/2020
Great...no problems.