Bulldog Powered Drive Trailer Jack - Drop Leg - A-Frame - 22" Lift - 3,500 lbs - Black
(368 reviews)
Price: $285.80
In Stock
Bulldog Powered Drive Trailer Jack - Drop Leg - A-Frame - 22" Lift - 3,500 lbs - Black
Item # BD500187
Our Price: $285.80
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (368)
- Q & A (0)
- Photos
Bulldog Camper Jacks - BD500187
- Pop Up Camper
- Teardrop Camper
- Travel Trailer
- A-Frame Jack
- Leveling Jacks
- Tongue Jack
- Electric Jack
- 1 Jack
- 22 Inch Lift
- Bulldog
- Bolt-On
This electric jack offers 22" of total travel and features an LED courtesy light for simple nighttime operation. Crank included for manual override in case of power failure. Extends 6" in 28.1 seconds with 1,000 lbs of tongue weight.
Features:
- Tongue jack positions quickly and easily with integrated drop leg
- Powered drive provides quiet operation and efficient use of electrical power
- No more hand cranking
- Easy-to-access on/off and retract/extend toggle switches make for simple operation
- LED courtesy light on front of jack allows for simple nighttime setup
- All surfaces are corrosion resistant
- Bolt-on installation with included hardware
- Black cover protects motor
- Emergency manual override crank included
Specs:
- Bracket height:
- 9-3/4" Retracted with drop leg retracted
- 23-3/4" Extended with drop leg retracted
- 31-3/4" Extended with drop leg extended
- Total lift: 22"
- Travel: 14"
- Drop leg: 8"
- Travel speed (w/ 1,000-lb tongue weight):
- Extends 6" in 28.1 seconds
- Retracts 6" in 24.5 seconds
- Inner tube diameter: 2"
- Outer tube diameter: 2-1/4"
- Footplate diameter: 5-1/2"
- Lift capacity: 3,500 lbs
- 5-Year limited warranty
How to Determine the Lift Capacity You Need in a Jack
A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball. To do this, you'll need a jack with a lift capacity high enough to handle your trailer's tongue weight.
Tongue weight is the amount of weight that your trailer applies to the back of your tow vehicle. Typically, your tongue weight should be 10-15% of your total trailer weight (trailer + cargo). In other words, a 10,000-lb trailer would have a tongue weight between 1,000 lbs and 1,500 lbs. For a trailer this size, you would need a jack with a lift capacity of at least 1,500 lbs.
It's okay to have a jack with a weight rating that is higher than your trailer's tongue weight. In fact, a jack with a higher lift capacity should operate more efficiently, allowing you to spend less time cranking and more time camping.
Trailer and Camper Jack Lift
Every jack offers a certain amount of lift or travel. Screw travel is the distance the jack extends when you crank it (or toggle it to "extend" on an electric model). Some jacks include a drop leg for extra adjustability. On these jacks, you'll see the maximum extension of the drop leg listed in the specs as well. Adding the screw travel and drop leg travel together will give you the total lift. The total lift listed above can help you determine how high this jack will be able to raise your trailer.
500187 Bulldog Electric A-Frame Jack - Black Cover - 3,500 lbs
Installation Details
California residents: click here
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Defective
- Wrong item was ordered
Customer Reviews
Bulldog Powered Drive Trailer Jack - Drop Leg - A-Frame - 22" Lift - 3,500 lbs - Black - BD500187
Average Customer Rating: 4.8 out of 5 stars (368 Customer Reviews)
This electric jack offers 22" of total travel and features an LED courtesy light for simple nighttime operation. Crank included for manual override in case of power failure. Extends 6" in 28.1 seconds with 1,000 lbs of tongue weight.by: Robert 08/27/2021
I received my new Bulldog jack fast after placing my order. It took me about 20 minutes to remove my old one and install the new one. This Bulldog jack is quieter than the previous one and moved up and down real well.
I needed to hook up in the evening before I left for my camping trip and will say the nice led light this jack comes with gives a very nice lighting to be able to see everything needed to hook up my trailer to my truck. I hope this one lasts much longer than my previous one. Time will tell but so far I really like the way this Bulldog jack operates
by: Jimmy j07/18/2019
Excellent Jack. Slow moving but that is due to high torque. Well made, attractive design. Highly recommended!
Solved the problem of busting my knuckles on the propane tanks while cranking the old jack.
by: Patricia A06/19/2022
I just installed this unit. It was so simple and easy to install. It took about 30 min ( minus the 2 hr it took to grind out 20 year old bolts from the manual jack). I love the sleek look of the unit. Gave it a test run and it's so quiet. I have a bumper pull horse trailer with a small living quarters and it lifted and retracted with no issues. Very happy with this product.
by: David 08/08/2022
The jack has worked well on my 24' enclosed car trailer.
It's a little slow going up which is to be expected with the weight of the car and trailer.
David
8/9/2023
Great, very happy with the purchase.
by: Ritchie10/18/2023
Bought this to replace the original jack on our R-Pod 195 that water got the best of. I was able to mount it in the sideways option and now we can drop the tailgate while still hooked up. It's the cat's meow!
by: Rob H04/01/2017
Fair price. Quick shipping. Arrived as promised.Installation video was very helpful, as were the instructions. Add the drop leg BEFORE bolting the unit in place. Otherwise, you need to raise the tongue to get the leg underneath. Simple install.
by: Jim 08/25/2023
A well built and quiet running product. We had Bulldog unit on our old trailer. My no name factory tongue jack on our new trailer lasted 17 months before the motor died. The BD unit is more expensive but it's built to last.
by: Bryan06/09/2018
What a dream come true! This electric jack replaced my old hand crank unit on my 24 foot travel trailer.
Installation was very simple with the one wire hook up. What I like most about this jack is the drop leg. This jack extends so far that now I won't need to bring all my boards (for lifting height) with me just to get the trailer off of the hitch.
Not included was a ring terminal for attaching the wire to the battery, but thats okay because I had one laying around. Another thing that I did, was that I found some flat washers to use between the head of the mounting bolt and the jack. The provided lock washers looked like they'd pull through the mounting plate.
Just be aware that the motor unit on the jack protrudes to the back and front of the center line of the jack tube. I'll have to deal with some clearance issues between the jack motor and my propane tanks. This isn't a flaw with the jack, just a quirk with my particular trailer setup.
Its a very nicely built jack, feels solid and heavy in your hand. Its powerful too. It had no problem picking up the trailer and my 2007 F-150 in order to install my weight distributing bars.
Heather A.
6/11/2018
If you need a ring terminal to wire this jack part # BD500187 I recommend part # DW05705-1 for a 3/8 stud size, part 44-5310A for a 3/16 stud size or part 44-5356A for a 5/16 stud size. All of these ring terminals will work with 12-10 Gauge Wire. Deka 10 gauge wire part # 10-1-1 will work well if you need extra wire.
Helpful Links
Accessories-and-Parts/3M/44-5310A.html
Accessories-and-Parts/3M/44-5356A.html
Bryan
6/10/2019
Jack still working great after one year. Hooking up the trailer is so easy. I don’t Miss that old hand crank at all.
by: Daniel03/07/2024
Great jack. Just what I needed to allow my tailgate to open while hooked up to my travel trailer
by: Charles 02/29/2024
great customer service, quick delivery. Lauren A is allways helpful goes out of her way to help.
by: H. Johnson04/08/2023
Easy install! The wiring is a bit bigger in diameter than I was expecting, so larger heat shrink butt connectors would have been helpful, but we got the job done! Excited to use this instead of hand-cranking the trailer on and off the truck 3-4 times a week!
by: Lewis08/02/2023
Working great after a year. It's nice to just push the button to raise the trailer tongue.
by: Charles01/22/2019
ordering and free delivery was nice, arrived in good condition, easy to install, justed installed and works well, beats raising and lowering trailer by hand, 26 ft enclosed trailer
by: Mike05/27/2022
My customer loves it. Just what he needed for his equipment trailer.
Mike
5/28/2023
Still working like a dream ! Very happy..
by: Elliott08/31/2023
So far, so good. Hopefully will outlast the terrible SmartJack it replaced.
by: Dan04/26/2021
Great product and easy install! Customer service great with placing order and follow up!
by: Michael 07/26/2022
Quality product fit my needs easy ordering decent shipping time
Michael
7/27/2023
Still working as expected!
by: Rod in B flo05/09/2019
Very happy with the performance of our Bulldog. The name fits. What a difference as compared to a manual jack. Well worth the modest expense, and installation was hardly rocket science. The built in light is a great feature for evening set ups. A minor tip - cover the motor during outside storage to limit the risk of water seepage into the unit. Our experience with etrailer was also very positive.
Rod B.
5/10/2020
Our Bulldog performs like it just came ouu u t of the box. The Full Monty!
by: John 07/07/2023
Bull dog jacks are the best.
by: Bill P03/16/2017
The Bulldog Powered-Drive Trailer Jack - Drop Leg - A-Frame - 14" Lift - 3,500 lbs - Black was very quick and easy to install. Seems to work great. This is on a small 3700 lb travel trailer and lifts with ease. Need to determine how far to ext and retract as not to blow fuses but it works great so far. Can't wait to take it out and see how it performs camping.
Bill P.
3/16/2018
Working great with no problems for a year
by: Roger M.05/06/2019
It's been a year now, and my jack is working just like it did a year ago when I installed it on my 32ft wildwood camper. Still smooth motion up and down. I really enjoy having it. Makes camping so much easier. One of the best purchase decisions I have made! I do have a cover I put on it when I bought it new, so it has never been wet, or exposed to sunlight. I can work the buttons on the jack through the cover, so I never take it off. I do love the jack. Thank you guys so much for good quality at a great great price!
Roger M.
5/6/2020
Its been a year and still woring as good as day one. Love it!
by: Gilles01/23/2019
The product came well packaged... on the second shipment! The first one was open and not good looking. Stuff happens, and it was corrected very quickly by etrailer reshipping a perfectly new Jack. And it works good and is really strong. Very happy with etrailer service and the Bulldog product.
Gilles
1/24/2020
After a year, product works as it should, I am very happy.
by: Dave S10/09/2017
Jack arrived in 2 days. Fits great and easy to install. Jack head only sticks out 3 inches from front of tube, closer then most. This allows me to open tailgate without hitting jack. I use an extended reciever for more clearance. Light on jack also shines in the bed of truck.
Dave S.
10/9/2018
Works great. No problems. Very nice jack.
by: Sam P12/11/2012
Great jack. I quickly found out that this jack also blows fuses if retracted completely, which is apparently common. It is a little slower than the Super Jack it replaced, but I like the added features such as: multiple mounting holes for mounting in different positions, LED lights, the switch is labeled up and down (my old jack wasn't, so if you were near the top and hit the switch the wrong way, you were replacing 20A fuses), and the adjustable drop leg. I am not crazy about the gold/bronze drop leg, but nothing a can of paint cant fix.
I installed it in just a few minutes as it is simply three bolts and one electrical connection. I ordered the jack on Saturday and it was at my house on Tuesday with regular ground shipping. Further, I received constant email updates on where the shipping process was. Great service again from etrailer.
Patrick B.
12/12/2012
The blown fuses can happen when the motor is over-loaded either by over-extending or over-retracting the jacks. A helpful trick is to mark the leg at stop points with a paint pen or scratch tool. That way you know when the jack is all the way up or down and you do not go too far and blow the fuse.
by: Timothy 12/25/2020
Shipping was fast and amazing as always. This jack bolted right on to my 2019 175LHS Hideout with the supplied hardware. Wired right up. I am excited about the drop leg. Will be nice to not have to run the jack all day. So far grat stuff. Would highly recommend.
Timothy G.
12/26/2021
Great!!
25
367
Show More Reviews
See what our Experts say about this Bulldog Camper Jacks
- Measurements of the Bulldog Jack part # BD500187 Here are some quick measurements of the Bulldog Jack part # BD500187 that you referenced: Bracket height: 9-3/4" Retracted with footplate retracted 23-3/4" Extended with footplate retracted 31-3/4" Extended with footplate extended Total travel: 22" Lift: 14" Drop leg: 8" Inner tube diameter: 2" Outer tube diameter: 2-1/4" I also attached a review video for this jack that shows even more dimensions.
view full answer... - Will Bulldog Jack part # BD500187 Work on 10,000 lb TrailerThe lifting capacity of the Bulldog Powered-Drive Trailer Jack # BD500187 is 3,500 lbs. A 10,000 lb trailer would have a tongue weight of between 1,000 to 1,500 lbs so this jack would work well. The warranty is a 5 year limited warranty that covers manufacturer defects.
view full answer... - Amperage Draw For Bulldog Powered Drive Trailer Jack Part # BD500187I spoke with my contact for Bulldog and he told me that the normal draw for the Bulldog Powered-Drive Trailer Jack, part # BD500187 is 15 amps, but can surge to 30 amps when under maximum stress.
view full answer... - Electric Jack Compatible with Propane Tanks on 1996 Northwood Nash 22H TrailerThe Bulldog Powered-Drive Trailer Jack - Drop Leg - A-Frame - 14" Lift - 3,500 lbs - Black # BD500187 will have the same bolt holes as your current triangle base, it will just have the rounded base between those bolts. It shouldn't change the fit with your propane tanks at all. Even the housing for the electric motor on top should clear the rounded part of close propane tanks so you will not have an issue.
view full answer... - Wiring Diagram for Switches of Bulldog Powered A-Frame JackI attached pictures that show how the switches of the Bulldog Powered Jack # BD500187 get wired.
view full answer...
- How To Turn The Light Off On A Bulldog Powered Drive Trailer JackThe light for the Bulldog Powered Drive Trailer Jack # BD500187 can be turned off by flipping the on/off switch on the left of the face to the off position.
view full answer...
- What To Do if You Bend the Outer Tube of a Bulldog Powered-Drive Trailer JackI wish I had something I could offer you, but I spoke with my contact at Bulldog and he informed me that the outer tube for this jack is not available. You will need to replace the entire jack.
view full answer... - Mounting Position Of Bulldog Powered-Drive Trailer JackThe Bulldog Powered-Drive Trailer Jack, part # BD500187, you referenced can be installed facing any direction you find is easiest for you. I would note that you should install it in a position that would allow you to use the manual function if you should lose power. The mounting flange on the power jack does have a couple of hole mounting patterns that should give you the flexibility you are looking for. I have attached an installation video for this powered jack you can check out.
view full answer... - Will Bulldog Powered Jack BD500187 Fit Tear Trailer on A-Frame TrailerAs long as you have an A-frame jack installed on your trailer currently the Bulldog Powered Jck part # BD500187 will easily fit and replace it. There isn't a wheel assembly for this or any of the other powered jacks because the wheels don't have very high capacities and it would greatly limit the capacity of the jack. The jack weighs 22 lbs and would be considered as tongue weight on your trailer.
view full answer... - Will Bulldog Powered-Drive Trailer Jack # BD500187 Fit on 2015 Keystone Cougar Travel TrailerThe Bulldog Powered-Drive Trailer Jack # BD500187 that you referenced uses two sets of industry-standard mounting hole spacing on its mounting flange to enable it to mount easily on the vast majority of modern a-frame bumper pull travel trailers like your 2015 Keystone Cougar. Please refer to the linked photo for illustration of the mounting bracket and to the linked video for a demo of installation. Installation hardware is included.
view full answer...
- What is the Warranty on the Bulldog Powered Drive Trailer JackI can understand why this must be frustrating but I can tell you that etrailer handles all warranty issues for Bulldog jacks (Horizon Global-Cequent is the parent company). For this reason, if you purchase your Bulldog Powered Drive Trailer Jack - Drop Leg - A-Frame - 22" Lift - 3,500 lbs - Black # BD500187 from etrailer you will be able to rely on us if the jack requires warranty replacement. As you've noted, this jack has a 5 year limited warranty and I've linked our review and installation...
view full answer... - Shortest Profile Electric Tongue Jack Available For Hatchback Door Clearance The lowest profile A-Frame Trailer Jack we currently carry is the Bulldog Powered Drive Trailer Jack # BD500187 which has a 20-1/2" height from the mounting plate to the top of the jack. That being said you do still need to consider the weight capacity of the jack if you can provide me with the weight capacity of your current jack or the GVWR of your trailer I can find the shortest option in that weight class.
view full answer...
- Height of Bulldog and the Powered-Drive Trailer Jack, # BD500187, from Bracket to Top of JackI spoke with my contact at Bulldog and the Powered-Drive Trailer Jack, # BD500187, measures 20-1/2 inches from the mounting bracket to the top of the jack. I have included a picture showing this measurement for you.
view full answer... - Can Powered A-Frame Jack be Powered From Breakaway BatteryThe breakaway battery of a trailer wouldn't have enough amperage to power the jack up and down and also it would drain it to point it wouldn't work as a breakaway kit. So you could power the jack from the 12 volt power circuit of the trailer wiring which normally runs to the breakaway battery or you could install a separate battery that is rated higher and would last longer. The Bulldog powered a-frame jack part # BD500187 would be a really solid choice for a powered jack. It has more...
view full answer... - Recommended Electric Trailer Jack for Fleetwood Mallard CamperThe Bulldog Powered-Drive Trailer Jack - Drop Leg - A-Frame - 14" Lift - 3,500 lbs - Black # BD500187 is a great option at a very good price point. The warranty does substantially beat the competitors and customers have been extremely happy. The Husky Brute HT87247 is no longer available. Due to the better warranty, customer happiness, and track record, I would recommend the Bulldog anyway. .
view full answer... - What is the Lift for the Bulldog Powered-Drive Trailer Jack # BD500187The difference that you are seeing is the total lift, 14 inches, and the total travel, which is 22 inches. Total lift has to do with how much the Bulldog Powered-Drive Trailer Jack # BD500187 moves when using the motor (or hand crank if need be). The total travel includes the 14 inches of lift of the motor plus the 8 inches of the drop leg when it is fully extended. I have attached review and installation videos so that you can see how this works.
view full answer... - Replacement Wiring for the Bulldog Powered Jack # BD500187I have an answer for you. I confirmed with my tech at Bulldog that they do not make replacement wiring for the Bulldog Powered Drive Trailer Jack - Drop Leg - A-Frame - 22" Lift - 3,500 lbs - Black # BD500187. Unfortunately, the only way to get additional wiring is by purchasing a whole new unit.
view full answer... - Does the Bulldog Powered-Drive Trailer Jack BD500187 Use a Fuse or Circuit BreakerThe Bulldog Powered-Drive Trailer Jack part # BD500187 has a built-in auto resetting circuit breaker. There isn't a reset procedure for this, since the breaker is thermally operated it will allow power to pass though once the temperature has receded to normal levels. If there is enough strain on the jack to cause the motor to draw more power than it is designed to then the breaker will trip, yes. This could be a result of either overloading the jack or a short.
view full answer... - Will Powered A-Frame Bulldog Jack Fit and Replace Manual Bulldog JackThe mounting flange of the # BD500187 will match up to the triangular mounting bracket on your trailer. All of the A-frame trailers basically use the same mounting bolt pattern and the fact you have a Bulldog jack on there currently means that the powered jack # BD500187 that you referenced is going to fit too.
view full answer... - Do You Offer a Replacement Motor For Weize 3,500LB Power Tongue Jack? You are most likely going to have to replace your entire jack. In my experience the motor is typically one part when it goes on on a trailer tongue jack the manufacturer does not carry any replacements. I recommend replacing it with the Bulldog Powered Drive Trailer Jack # BD500187. The thing I like about this jack is it has a 5-year warranty, where most manufacturers only give a 1-year warranty. You can contact the manufacturer Weize directly to determine if they have a replacement motor...
view full answer... - Will Bulldog Powered Trailer Jack BD500187 Fit 2005 ALJO Model 225LTYes, I checked out pictures of your 2005 ALJO Model 225LT and it is built on a standard A-frame trailer so it would work well with the Bulldog trailer jack part # BD500187 that you referenced. I attached an install video for this jack for you to check out as well.
view full answer... - Height of Bulldog Powered A-Frame Jack BD500187 From Mounting Bracket to Top of JackI spoke with my contact at Bulldog and the Powered-Drive Trailer Jack, # BD500187, measures 20-1/2 inches from the mounting bracket to the top of the jack. I have included a picture showing this measurement for you.
view full answer...
- Bulldog Powered-Drive Trailer Jack LED Light On All The TimeI spoke with my contact at Bulldog about the problem you are having with your Bulldog Powered-Drive Trailer Jack # BD500187. He said it is likely that the problem is with connection for the ground wires in the jack. To check your ground connection, you will want to remove the screws holding the jack cap in place. Once you have the cap off, you will see a stud where the ground wires are attached. The nut securing the wires may need to be tightened down. My contact said that they have found...
view full answer... - Using Bulldog Powered Trailer Jack for Farm ImplementThe Bulldog Powered-Drive Trailer Jack you referred to, part # BD500187 would be a good choice, assuming that the tongue weight on the piece of equipment doesn't exceed the 3500 lb weight capacity of the jack and assuming you can provide a 12-volt power source for the jack. For long life of the jack and easy operation, I always recommend going with a higher rated jack.
view full answer...
Do you have a question about this Camper Jack?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Written by:
Lindsey S
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Mike S
Updated by:
Isabelle B
Installed by:
Randy B
Video Edited:
Chris R
Video by:
Zach D
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jimmy J.
7/18/2020
Great...no problems.