bing tracking image
  1. Camper Jacks
  2. Bulldog
  3. A-Frame Jack
  4. Leveling Jacks
  5. Tongue Jack
  6. Pop Up Camper
  7. Teardrop Camper
  8. Travel Trailer
Bulldog Powered Drive Trailer Jack - Drop Leg - A-Frame - 22" Lift - 4,000 lbs - White

Bulldog Powered Drive Trailer Jack - Drop Leg - A-Frame - 22" Lift - 4,000 lbs - White

Item # BD500200
Retail:$523.54
Our Price: $374.50
You Save: $149.04
Camper Jacks
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
The best technical support and full camper jacks installation instructions. Great price Catalina SBX Travel Trailer camper jacks and expert service. Coachmen Catalina SBX Travel Trailer, 2018 camper jacks by Bulldog are available from etrailer.com. For expert service call 1-800-940-8924 to order your Bulldog Powered Drive Trailer Jack - Drop Leg - A-Frame - 22" Lift - 4,000 lbs - White part number BD500200, or order online at etrailer.com.
  • All Info
  • Reviews (373)
  • Q & A (0)
  • Photos

Bulldog Camper Jacks - BD500200

  • A-Frame Jack
  • Leveling Jacks
  • Tongue Jack
  • Pop Up Camper
  • Teardrop Camper
  • Travel Trailer
  • Electric Jack
  • Bulldog
  • 1 Jack
  • 22 Inch Lift
  • Bolt-On

This electric A-frame jack offers 22" of total lift. The drop leg has a spring-loaded pull pin for quick release. 3 LED lights allow easy setup at night. Built-in level included. Extends 6" in 28.5 seconds with 1,000 lbs of tongue weight.


Features:

  • Tongue jack positions quickly and easily with integrated drop leg
  • Powered drive provides quiet operation and efficient use of electrical power
    • No more hand cranking
  • Spring-loaded pull pin quickly releases the drop leg into position
  • Built-in level has springs for simple, accurate leveling
  • 3 LED lights make it easy to set up at night
    • Side-mounted spot lights are angled rearward to illuminate weight distribution brackets
  • 4" - 6" Overlap of tubes at full extension provides additional support for side loading
  • Easy-to-access on/off and retract/extend toggle switches make for simple operation
  • Corrosion-resistant, sealed, maintenance-free surfaces
  • Easily accessible emergency manual override in case of power loss
  • White housing with sleek design protects motor


Specs:

  • Bracket height:
    • 9-3/4" Retracted
    • 31-3/4" Extended
  • Total lift: 22"
    • Screw travel: 14"
    • Drop leg travel: 8"
  • Travel speed (w/ 1,000-lb tongue weight):
    • Extends 6" in 28.5 seconds
    • Retracts 6" in 25.4 seconds
  • Inner tube diameter: 2"
  • Outer tube diameter: 2-1/4"
  • Lift capacity: 4,000 lbs
  • 5-Year limited warranty


How to Determine the Lift Capacity You Need in a Jack

A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball. To do this, you'll need a jack with a lift capacity high enough to handle your trailer's tongue weight.


Tongue weight is the amount of weight that your trailer applies to the back of your tow vehicle. Typically, your tongue weight should be 10-15% of your total trailer weight (trailer + cargo). In other words, a 10,000-lb trailer would have a tongue weight between 1,000 lbs and 1,500 lbs. For a trailer this size, you would need a jack with a lift capacity of at least 1,500 lbs.


It's okay to have a jack with a weight rating that is higher than your trailer's tongue weight. In fact, a jack with a higher lift capacity should operate more efficiently, allowing you to spend less time cranking and more time camping.


Trailer and Camper Jack Lift

Every jack offers a certain amount of lift or travel. Screw travel is the distance the jack extends when you crank it (or toggle it to "extend" on an electric model). Some jacks include a drop leg for extra adjustability. On these jacks, you'll see the maximum extension of the drop leg listed in the specs as well. Adding the screw travel and drop leg travel together will give you the total lift. The total lift listed above can help you determine how high this jack will be able to raise your trailer.



500200 Bulldog A-Frame Jack with Powered Drive, 22" Lift, 4,000 lbs

Replaces Bulldog BD500185

Installation Details BD500200 Installation instructions

California residents: click here


Customer Satisfaction Score:


Customer Reviews

Bulldog Powered Drive Trailer Jack - Drop Leg - A-Frame - 22" Lift - 4,000 lbs - White - BD500200

Average Customer Rating:  4.8 out of 5 stars   (371 Customer Reviews)

This electric A-frame jack offers 22" of total lift. The drop leg has a spring-loaded pull pin for quick release. 3 LED lights allow easy setup at night. Built-in level included. Extends 6" in 28.5 seconds with 1,000 lbs of tongue weight.

by:

I have had problems with inadequate clearance between the lift gate of my Ford F150 and tongue jack motors on prior travel trailers. Some lifts allow the motor to be rotated sideways, but the bulky Lippert that came with my new Winnebago TT didn't. The Bulldog is made to be mounted either forward or sideways and has a particularly narrow body. Installation was a snap, and I drilled holes to rotate the bubble level to be aligned fore and aft. I opted not to use the clever Plunger Pin Kit which is mounted to be pulled from the side because when the unit is mounted sideways, the pin with its fairly stiff spring would have to be deployed and operated either fore or aft beneath the hitch or the tongue assembly. So I am using the original lynchpin assembly for the drop leg.

Now I have plenty of clearance between the Bulldog lift, the F150 drop gate and the propane tanks and cover.



by:

I am extremely pleased with everything about the purchase. The jack was described very accurately, I had a question before delivery about the fit on my R-Pod which was answered very thoroughly and the jack arrived on time. The installation was quick and easy. The jack operates very smoothly. The features of the LEDs, the quick pull pin for the drop foot and the bubble level are perfect for my application.



by:

The Bulldog Jack has been great!



by:

I installed this electric jack on my 3-horse bumper pull trailer. I'm using power straight from the truck's RV 7 wire hook-up. I, along with my family are so glad I installed this every time we hook up to the trailer. The adjustable leg is also an added benefit. I also purchased the termination box and this allowed for a superior installation by putting all the terminations in a water proof box versus open wire joints. Thanks etrailer for your support and your quality products.

Shorty S.

1/25/2018

Still lifting and lowering my trailer as designed. Having used the jack up to 6-8 times a month, I is withstanding the rigors of hauling. The little bubble level on top of the jack is pretty much useless in my application besides, the bubble is now about the length of the vial. Short of that, Id recommend to others. I am please with this product and sometimes wonder if I should have purchased the next size up.



by:

I have a 2007 14' V-noise extra wide and tall trailer, and the jack was needing to be replaced. I figured it was a good time to think about a powered lift option. After spending several days doing research, I determined that the Bulldog Powered Drive Trailer Jack, was the best product to meet my needs. etrailer has this product for the best price online, and offered free shipping, so for basically $100 more than a high quality none powered replacement jack, It was a no-brainer.

My wife and I installed the unit on my trailer that was still on my tow vehicle in less than 45 minutes, and everything we needed minus a weather proof inline connector was included. It was so easy to install, and looked so good after installation.

Because of the size and weight of my trailer, hooking and unhooking my trailer used to be a real chore for me, since I am older and have back problems. Then it was time for the true test, dropping the trailer for the first time.

WOW! The spring loaded pin for the drop leg made it so easy! No more need for the several wood blocks we needed to lug around. Also it was now dark, so I turned on the lights. What a difference! The video does not do the lights justice. They clearly illuminate the rear of the tow vehicle, and front of the A-frame of the trailer.

Then, by simply pushing the weather proof button, a chore I used to dread, that left me sore and sweaty, was now effortless! Quiet, smooth operation, and built in stops for extra protection.

Very solid high quality construction, with all the features you need and want. The all weather design, powder coated metal parts make it easy to understand the reason why the manufacturer offer a 5-year warranty.

I am only left with one question...why did I wait so long to buy this great product at the lowest price from Etrailer?



by:

I purchase this item to replace a 12 year old power jack. I’m spoiled and I’ll never go back to a manual jack. The jack feels and looks like a high-quality unit. All hardware was individual packaged. Installation went smoothly following the excellent directions.

I’ve run the jack up and down a couple of times and it functions smoothly and quietly. The drop-leg is an excellent design.

I look forward to many years of service from this jack.

Hb

5/31/2019

I have found a flaw in the jack. The metal rod used to release the foot is made from pretty junky metal. It got hung-up in my chains while I was lowering the jack and bent. The deflection was pretty minimal - I caught it very quickly - yet when I bent the long leg of the rod back, it broke off. For the price, I’m not impressed with this aspect of the jack. It has rendered the [] leg useless as I had to secure it in place so it didn’t fall out.



by:

The trailer tongue jack arrived undamaged and fits perfectly.



by:

I bought an electric trailer jack. The price was fair, shipping was fast, and item was exactly as described.

Great service!



by:

The Bulldog Powered Trailer Jack was a perfect fit for my Jayco White Hawk travel trailer. Installation was easy and the switches are easy to operate and are clearly marked. The customer service reps were awesome!



by:

I love my trailer jack. I was so tired of cranking and this is so easy. Just what I wanted!



by:

Easy to install, works well. Used it to replace another jack that died after 5 years. It would be good if they included the electric hook up instructions with it. If I didn’t have the earlier jack connections I would have had a much more difficult time installing.



by:

Quick easy installation, all hardware provided, lights are just enough to see what your doing, only reason it's not 5 stars is because I've used it long enough to test. But it will be used daily, so testing won't take long, oh by the way shipping was 10 stars, haven't had a package arrive like it was supposed to in long time. Thanks everyone involved etrailer!



by:

Shipped on time, easy to install, great product and service, very happy.

Trevor J.

1/8/2019

Very good



by:

Easy installation and works great



by:

It has been perfect. It gets used daily and never misses a beet.



by:

Was used for our camper. Haven't used it at this time,but pretty certain it will be the best product ever purchased.



by:

Alonzo

3/13/2022

I love it Great product



by:

great product the package was in bad shape when delivered by UPS hope everything is there.



by:



by:



by:



by:



by:



by:



by:


25
372
Show More Reviews

See what our Experts say about this Bulldog Camper Jacks

  • What is Quietest Electric A-Frame Trailer Jack
    We've found that the Bulldog trailer jacks like the part # # BD500199 (Black) or # BD500200 (White) are the quietest so either of these would be your best option.
    view full answer...
  • Replacement Jack Recommendation for Damaged Bulldog Powered A-Frame Jack
    That is a really frustrating way to damage a jack. I wish we had the components you'd need to fix your Bulldog part # BD500200 that you referenced but Bulldog basically only offers replacement switches for this jack. You are going to need a new jack. I think the best value for an A-frame tongue jack is the Stromberg Carlson # SC63VR which is rated for 4500 pounds of tongue weight. This is 1000 pounds more than other models, and even though you may not need this much capacity, you will...
    view full answer...
  • What is the Lifting Capacity of the Bulldog Powered-Drive Trailer Jack, # BD500200
    On the Bulldog Powered-Drive Trailer Jack, # BD500200, 4,000 pounds is the lift maximum. So, if it mounted on the trailer tongue and the tongue weights is up to but not exceeding 4,000 pounds, the jack will lift it. There is no static capacity listed (how much it can hold just sitting) so, in this case, the static capacity will also be 4,000 pounds. I have included a link to a video featuring this jack.
    view full answer...
  • Troubleshooting Bulldog Jack that The Switch Has to Be Pressed a Few Times Before it will Activate
    It sounds like you may have an intermittent ground issue. Since the part # BD500200 grounds through the mounting hardware you will want to make sure the metal it attaches to is clean and free of corrosion. You also want to make sure the main ground wire from the trailer connector is connected to a clean metal surface. It might not hurt to check the power wire connection as well. Make sure it is making a solid connection. The switches for this jack aren't offered as a replacement part.
    view full answer...
  • Which Solar Panel Should I Use to Keep Battery Charged That Runs Trailer Jack
    You can use the Go Power Eco Solar Charging System with Digital Solar Controller - 10 Watt Solar Panel # 34273836 if you use the battery for any other electronics on the trailer. This will provide 3.42 amp hours of charging power and will allow you to make sure that you're always able to use your Bulldog # BD500200 jack even if the battery has been sitting unused for some time. If you just use the battery to power the jack, the 2.5-Watt Solar Battery Charger # PTW2997 might be a more...
    view full answer...
  • What is the Rate of Travel for Bulldog Powered-Drive Trailer Jack # BD500200
    I spoke with my contact at Bulldog about the Powered-Drive Trailer Jack, # BD500200. He stated that the rate of travel is 14 inches per minute with no load and 8 inches per minute under full load (4,000 pounds). While in use, the jack uses 2 amps with no load, up to 30 amps under full load. .
    view full answer...
  • Will Wiring 4K Bulldog A-Frame Jack to Trailer Battery be Better Than Drawing Off of Vehicle 7-Way
    If your 4K Bulldog A-Frame jack like part # BD500199 or # BD500200 is struggling under the tongue weight of a 14,000 lb trailer then I would have to agree that it likely isn't getting the power it needs from the 7-Way on your truck and using a battery directly for the jack should help it perform better. Another thing to check is the trailer frame where the jack is installed. Since it grounds through the mounting hardware any rust or corrosion (or sometimes paint) can cause power issues....
    view full answer...
  • How to Manual Raise and Lower a Bulldog Powered A-Frame Trailer Jack
    It depends on which Bulldog powered A-frame trailer jack you have. For example, # BD500200. has a cap on top and you can use a socket wrench and socket to manually crank the jack up and down. Jacks # BD500187 and # BD500188 come with a handle. But both of these have a cap on top that you will remove to access the manual override.
    view full answer...
  • Electric Jack Recommendation for Bumper Pull Horse Trailer
    Since the Atwood Jack part # 80515 has been discontinued the decision would be pretty easy for you. The Bulldog Jack part # BD500200 is not only the obvious choice between the two you referenced, this jack is an excellent jack with plenty of power for your setup that has been reviewed highly by our customers who have bought and used it. I attached an install and review video for this jack for you to check out as well.
    view full answer...
  • A-Frame Electric Trailer Jack for Car Hauler
    The Bulldog Powered Drive Jack part # BD500200 would be an excellent choice for your car trailer. It has a 4,000 lifting capacity which would easily handle the tongue weight capacity of your trailer and would make life much easier than hand cranking your current hand winch!
    view full answer...
  • Recommended Electric Trailer Jack For Race Trailer
    For the Bulldog Powered Drive Trailer Jack - Drop Leg - A-Frame - 14" Lift - 4,000 lbs - White # BD500200, the only replacement parts we have are the cover for the manual crank # BD500201 and the two switches # BD500363 and # BD500362. If the motor burned out, it is time for a new jack. Our most popular electric jack is the Stromberg Carlson # SC63VR which is rated for 4500 pounds of lifting power. What sets this jack apart is the stops that prevent the jack foot from being over extended...
    view full answer...
  • Recommended Electric A-Frame Jack To Replace Manual Jack On Haulmark Tandem Enclosed Trailer
    It sounds like the Bulldog A-Frame Jack, part # BD500200 is just what you are looking for. The BD500200 has an outer tube diameter of 2-1/4 inches which matches what you are replacing and this jack has 2 toggle switches. One is used to control the up and down movement of the jack and the other switch turns the LED lights on and off. The mounting plate features mounting holes that allow you to mount it so the controls are at the front of the jack or mount it so that the controls are on...
    view full answer...
  • Dimensions for Installation of a Bulldog Electric Powered Trailer Jack with Propane Tanks on Tongue
    The distance from the top of the mounting plate to the bottom of the housing on the Bulldog Powered-Drive Trailer Jack, # BD500200, is 13 inches.
    view full answer...
  • Could the Bulldog Jack part # BD500185 Use a Previous Powered Jacks Wiring to Install
    The Bulldog Jack part # BD500200 should install just fine with the previous jack's wiring as long as the wire from the previous jack has the same gauge as the wire from this jack. If the previous wire looks much thinner then I would recommend you not reuse it and run new wire. I attached an install video for you to check out as well.
    view full answer...
  • Will Bulldog Powered A-Frame Jack BD500200 Work Well To Replace 2,000 lb Trailer Jack
    The Bulldog Powered Drive Trailer Jack # BD500200 that you referenced will work great on your trailer. It has a higher lifting capacity than your current jack and would have no problem lifting your trailer's tongue weight. If your trailer weighs 3,500 lbs that means the tongue weight is around 350 lbs. This jack has a 4,000 lb tongue weight capacity so it would barely notice your trailers's tongue weight. It also is designed to attach to the same 3 bolt mounting flange that your trailer...
    view full answer...
  • Replacement Pull Pin For Bulldog Powered Drive Trailer jack BD500200
    It sounds like you are looking for the Replacement Spring Loaded Pull Pin # BD500388 for your Bulldog Powered Drive Trailer Jack # BD500200. If this is not what you are looking for just let me know. I included a video for both of the parts mentioned for you to take a look at.
    view full answer...
  • Troubleshooting Bulldog Powered Jack Not Working When Plugged into 2000 Chevy Silverado
    Sounds like the 12 volt accessory circuit of the 7-way of your 2000 Chevy Silverado is not active so the Bulldog Jack part # BD500200 that you referenced is not getting power. There are a few connections under the hood of your truck that need to be made to allow the circuit to be active. Check out the help article I attached that detail how these connections get made.
    view full answer...
  • Can Power for the Bulldog Powered Drive Trailer Jack Come from the 7-Way Trailer Connector
    The installation of a 7-way trailer plug like the Pollak Black Plastic, 7-Pole, RV-Style Trailer Connector part # PK12706 on an electric a-frame trailer jack like the Bulldog Powered Drive Trailer Jack part # BD500200 is not something that we have the ability to offer you unfortunately. However, this process will be extremely simple as all you need to do is insert the power wire on the jack into the correct terminal on the 7-way and then tighter down the screw. It should not take more than...
    view full answer...
    Image 1 for
  • How to Maintain Electric Jack Ground Connection if Using the Jack-E-Up Quick Disconnect
    So the question is are you wanting to use this device because your tailgate hits your jack or because you have bent the bottom of jacks in the past? Because if it is a tailgate issue there is a much simpler solution; a longer ball mount. But really the cost is about the same so 6 in 1, half a dozen in the other. It appears that the device is made of steel so when your jack is in place it shouldn't lose the ground connection. You may need to scrape away any powder coat on the device though...
    view full answer...
  • Troubleshooting Bulldog Power Jack BD500186 that Drains Trailer Battery After Several Uses
    First you will want to use a circuit tester like part # PTW2993 to test the 12 volt accessory circuit of your 7-way. There should be voltage on this circuit, if not check the fuses of your tow vehicle as most likely one has blown. This is probably the issue. If there is voltage there you will want to test the wire that leads to the battery with the trailer connector connected but the wire disconnected from the battery so that you can tell if the voltage on the circuit is coming from the...
    view full answer...
  • Replacement Electric Tongue Jack that Will Allow Full Opening of Tailgate on Tow Vehicle
    I have a solution for you, but the Bulldog # BD500200 is only going to be about 2" shorter than you current jack, and I think we can do a little bit better than that to make sure that you get full use of the tailgate on your 2019 Chevy Suburban. When choosing a trailer jack, it will need to be able to lift the tongue weight of your trailer and not the entire weight of the trailer; your 7000-lbs trailer should be in the neighborhood of 1000-lbs tongue weight when the trailer is fully loaded...
    view full answer...
    Image 1 for
  • Width Of Head On Bulldog Powered Drive Trailer Jack BD500200
    I had our warehouse measure the Bulldog Powered Drive Trailer Jack - Drop Leg - A-Frame - 22" Lift - 4,000 lbs - White # BD500200 and it measures at 4-1/4" wide as shown in the included diagram. I included a video of the # BD500200 for you to take a look at.
    view full answer...
    Image 1 for
  • How Does Bulldog Powered A-Frame Jack Raise and Lower Manually
    Your Bulldog powered A-frame jack part # BD500200 would have come with a manual override lever like the part # BD500203 which you could use to manually raise and lower the jack as needed. If you check out the 5:36 mark of the review video I attached for this you'll see how the manual crank is used once removing the cap on the top of the jack.
    view full answer...
  • Can Bulldog Powered Drive Trailer Jack BD500200 be Powered by 7-Way
    Whether or not the Bulldog 4000 powered a-frame jack part # BD500200 can be powered by a vehicle 7-way comes down to the amperage rating of the 12 volt trailer accessory circuit. This is rated for up to 35 amps so as long as you had a 40 amp fuse for this circuit which is pretty common you could power the jack from your 7-way. Most likely this is the case.
    view full answer...


< Previous



Do you have a question about this Camper Jack?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Lindsey S
Edited by:
Lindsey S
Employee Jacob T
Video Edited:
Jacob T
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Mike S
Updated by:
Mike S
Employee Isabelle B
Updated by:
Isabelle B
Employee Noah M
Updated by:
Noah M
Employee Cole B
Installed by:
Cole B
Employee Shelly K
Written by:
Shelly K

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.