Demco 50-Degree A-Frame Trailer Coupler w/ Jack Hole and Anchors, eZ-Latch - 2-5/16" Ball - 21K

Demco 50-Degree A-Frame Trailer Coupler w/ Jack Hole and Anchors, eZ-Latch - 2-5/16" Ball - 21K

Item # DM16680-52

lowest price pledge

Our Price: $100.57

A-Frame Trailer Coupler

This item qualifies for Free Shipping

Shipping Weight: 9 lbs

Quantity: 
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

A-frame coupler is made of sturdy steel and has a silver powder coat finish, making it ideal for marine applications. eZ-Latch ensures fast, easy, secure hookup and disconnect. Includes cutout for your 2-1/4" round jack. Bolt-on installation. Call 800-298-8924 to order Demco a-frame trailer coupler part number DM16680-52 or order online at etrailer.com. Free expert support on all Demco products. Guaranteed Lowest Price and Fastest Shipping for Demco 50-Degree A-Frame Trailer Coupler w/ Jack Hole and Anchors, eZ-Latch - 2-5/16" Ball - 21K. A-Frame Trailer Coupler reviews from real customers.
  • All Info
  • Reviews (6)
  • Q & A (7)
  • Videos (1)
  • Photos
  • Why etrailer?

Demco A-Frame Trailer Coupler - DM16680-52

  • 2-5/16 Inch Ball Coupler
  • Bolt-On
  • 21000 lbs GTW
  • Standard Coupler
  • Demco
  • Auto Latch

A-frame coupler is made of sturdy steel and has a silver powder coat finish, making it ideal for marine applications. eZ-Latch ensures fast, easy, secure hookup and disconnect. Includes cutout for your 2-1/4" round jack. Bolt-on installation.


Features:

  • A-frame coupler lets you hook up your trailer to your tow vehicle
    • Provides connection point for hitch ball
  • eZ-Latch mechanism with corrosion-proof composite latch handle ensures simple, secure hookup and disconnect
    • Lets you hook up when latch is in closed position - just drop coupler over hitch ball and latch will snap into place
  • Sturdy steel construction
  • Silver powder coat finish offers excellent corrosion resistance
    • 500-Hour salt spray rating - great for marine applications
  • Bolt-on installation
  • Cutout in top plate fits jacks with 2-1/4" diameter outer tubes
  • Chain anchors included


Specs:

  • Application: 50-degree A-frame trailers
  • Ball size: 2-5/16"
  • Weight capacity: 21,000 lbs
  • Overall length: 17-5/8"
  • Diameter of lock pin hole: 5/16"
    • Minimum span needed for pin lock: 3"
  • 1-Year warranty


eZ-Latch Coupler

This coupler features a simple-to-use latching mechanism known as the eZ-Latch. With this mechanism, hooking up is as easy as dropping the coupler over your trailer hitch ball. The latch does not need to be tugged or manually activated to allow the ball into the coupler socket, nor does it have to be secured in place. Just make sure that the coupler is properly lined up with the ball when you lower it, and the rest is automatic. Disengaging the coupler is just as effortless. Simply lift up the contoured handle and the coupler socket will automatically release its grip on the ball.


Demco eZ-Latch in Use

Sturdy, Corrosion-Resistant Construction

Made of sturdy steel, this A-frame coupler features a durable silver powder coat finish that is designed to limit rust and corrosion. This finish has a 500-hour salt spray rating, making the coupler perfect for marine use. The eZ-Latch's sleek, ergonomically designed handle is constructed of a durable composite material that's corrosion-proof, allowing it to withstand whatever the road and the elements dish out.



16680-52 Demco A-Frame Trailer Coupler with Easy Latch and Jack Hole and Chain Anchors - Silver - 2-5/16" Ball - 21,000 lbs

Replaces Demco DM13205-52







Video of Demco 50-Degree A-Frame Trailer Coupler w/ Jack Hole and Anchors, eZ-Latch - 2-5/16" Ball - 21K


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Review of Demco A-Frame Trailer Coupler - Standard Coupler - DM16680-52


Customer Reviews

Demco 50-Degree A-Frame Trailer Coupler w/ Jack Hole and Anchors, eZ-Latch - 2-5/16" Ball - 21K - DM16680-52

Average Customer Rating:  4.7 out of 5 stars   (6 Customer Reviews)

A-frame coupler is made of sturdy steel and has a silver powder coat finish, making it ideal for marine applications. eZ-Latch ensures fast, easy, secure hookup and disconnect. Includes cutout for your 2-1/4" round jack. Bolt-on installation.

- DM16680-52
by:

Excellent construction and easy to install! A+ 612111



- DM16680-52
by:

It’s been a year and I’m having to replace the hitch on my trailer once again. The factory one broke around the ball. This one is cracking beside one of the factory welds. I do put a lot of miles on and the trailer is around 18k loaded. So all in all it’s done it’s job. 567649



- DM16680-52
by:

Well made part..fast shipping! 544331



- DM16680-52
by:

Well made part..fast shipping! 544326



- DM16680-52
by:

Very pleased with the purchase. Was delivered in a timely manner and product was as described. Would gladly do business with Etrailer again. 480613



- DM16680-52
by:

Has a nice zinc coating and it bolted on with no problems. 398938


6
6

Ask the Experts about this Demco A-Frame Trailer Coupler

Do you have a question about this A-Frame Trailer Coupler?


  • Size and Type Bolts Required to Install Demco A-Frame Trailer Coupler with Hole for Trailer Jack
  • To install the Demco A-Frame Trailer Coupler # DM16680-52 that you referenced, you will want to use 3/8 inch, grade 5 bolts , approximately 1-1/2 inches long (depending on how you are installing the coupler). You will want to use 5 of these bolts per side for a total of 10 bolts.
    view full answer...

  • Can the Demco 50-Degree A-Frame Trailer Coupler Part DM16680-52 Be Locked
  • Yes, you can use the Trailer Coupler Lock part # e98888 to prevent the hitch ball from coming uncoupled from the Demco 50-Degree A-Frame Trailer Coupler part # DM16680-52. The lock will install in the pin hole directly below the latch which you can see in the attached photo.
    view full answer...

  • Can Weld-On A-Frame Trailer Coupler be Replaced with a Bolt-On Coupler
  • Yes, you can replace your weld-on coupler with a bolt-on. You'll just need to drill the holes. Then, if you wanted to go back to a weld-on later that would be fine too. Just to confirm you can check with the trailer's manufacturer that drilling the holes won't lower the trailer's capacity. Our most popular A-frame couplers are the Demco eZ-Latch. The eZ-Latch makes it easier to hookup and disconnect from your trailer. For a coupler that fits a 2 inch ball use # DM14793-52 and...
    view full answer...

  • Package Contents of Demco A-Frame Trailer Coupler with Jack Center Hole # DM16680-52
  • The Demco coupler # DM16680-52 you were looking at does not include the hardware needed for installation. It would be a good idea to switch over from your weld on to a bolt on coupler, this will make it a whole lot easier to replace over time as it wears out as you have stated.
    view full answer...

  • Is There a Trailer Coupler Repair Kit for An Atwood Trailer Coupler
  • I do have an option for you but trailer coupler repair kits are model specific and since Atwood has went out of business there are no more trailer coupler repair kits for their couplers. I am afraid the only option for you is to replace the entire couper which I know is not what you want to do but is your only option. I recommend the Demco A-Frame Trailer Coupler part # DM16680-52 because of the foolproof eZ-Latch system and the bolt-on installation which means all you need to do is...
    view full answer...

  • How Much Wiggle Room Should There Be In A Trailer Coupler
  • Correct, there will need to be a small amount of wiggle room or play between the trailer coupler and hitch ball which is to allow the trailer to track and turn smoothly. If the connection point between the trailer coupler and hitch ball was too tight then the trailer would not track or turn correctly. However, if the connection point is too lose then the coupler could become detached from the hitch ball. The vast majority of trailer couplers are not adjustable but there might be a few out...
    view full answer...

  • A-Frame Trailer Coupler for a 2-5/16 Inch Ball that Can be Locked
  • Coupler repair kits are not always universal. In fact it is less likely that one designed for a certain coupler will fit a different coupler. Without knowing the brand and model coupler you have I cannot guarantee that any of the repair kits will work. I recommend replacing the coupler with a new one such as # DM16680-52. It is a bolt-on A-frame coupler that takes a 2-5/16 inch ball. You can look it with a latch lock, # e98888.
    view full answer...


Do you have a question about this A-Frame Trailer Coupler?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality a-frame trailer coupler for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate a-frame trailer coupler information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Edited by:
Lindsey S
Installed by:
Kathleen M
Updated by:
Sarah W
Written by:
Kristina F

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.