To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Install your Redarc Tow-Pro electronic brake controller (sold separately) quickly and easily with this custom wiring adapter. Plug one end of the adapter into your Tow-Pro brake controller and plug the other end in beneath your vehicle's dash.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Michael: Hi there, I'm Michael with etrailer.com. Today we're going to take a quick look at the Plug-and-Play Wiring Harness for your Redarc Tow-Pro Trailer Brake Controllers.This wiring harness is going to allow you to easily install your Redarc Tow-Pro Brake Controller. It is right about two and a half feet long, so it's going to give you a lot of room to work with and to just make sure that that brake controller is mounted where you want it. And it's going to be a lot simpler to get everything installed. Basically this end is going to plug into your connection plug underneath your vehicle's dash. This is going to be a custom fit, so it's going to work with your 2016 through 2020 Toyota Tacoma, as well as your 2015 through 2020 Toyota Tundra.Our other end is going to them fit on to our Redarc Electric Brake Controller, it's going to work with the Classic, Elite or Liberty Brake Controllers.Now, if you have the Elite or the Liberty, it's going to be very easy, just have to plug it in with the Classic.
You are going to have to do a little bit of a splicing of the wires. So might be a little bit more involved, but still very easy. The instructions walk you through how to do that. So very simple to get installed. And once you get it plugged in, you're set.
You don't have to worry about anything after that.This is made here in the USA, so you can trust it's made to the same high quality standards that we've come to know and trust for products that are made here in the US and it is a Redarc product, so you can trust it's going to work with your electric brake controller. You're not going to have to worry about compatibility issues or anything like that.And it does come with a two year warranty. So if you we're to have any problems with it within those first two years, you could give us a call, we'd be happy to help you out with that.But overall, I think this is going to be a great option for you. If you've got one of those Toyotas and you're wanting to use that Redarc Brake Controller, this is going to get it all connected and allow you to control those trailer brakes.So that's going to complete our look for today. Again, I'm Michael with etrailer.com.
Thanks for watching..
Average Customer Rating: 4.9 out of 5 stars (143 Customer Reviews)
Install your Redarc Tow-Pro electronic brake controller (sold separately) quickly and easily with this custom wiring adapter. Plug one end of the adapter into your Tow-Pro brake controller and plug the other end in beneath your vehicle's dash.Harness made install quick. Tacoma’s trailer harness is behind the driver’s side kick panel. No tools required to pop the kick panel off just pull carefully. Trailer connection is all the way back against the firewall behind some other wires. There is a grounding screw about 6-8” in front of the harness connection on the exterior wall.
This made the installation of my Redarc Tow-Pro Brake Controller a breeze!
This product is top notch and the price is right. Easy installation and intuitive operation. Puts the brakes on the trailer. Very happy with both the product and the process.
This wiring harness worked great on my 2020 Toyota Tacoma. Made the installation of my redarc tow-pro elite so easy.
My '15 tundra had the factory harness right behind the tow/haul switch to the right of the steering wheel as described in the install instructions that came with the redarc harness. Just pop the whole panel off that houses all 3 buttons and you will see the harness. Plug right into that with the harness, white wire goes to a good ground (tundras have a commonly used ground behind the plastic shroud that is to the left of the parking brake.) All plug and play from there.
Took 10 minutes to install , works great
Made the install super easy. Well worth the extra $$$. Thanks REDARC!
We didn't realize when we ordered the Redarc Tow-Pro Trailer Brake Controller that we ordered the one that did not have the wiring harness with it. So be sure to double check that you have ordered the correct one. But E-Trailer was fantastic and got it to us so quickly when we realized what we had done.
The red arc trailer brake controller worked flawlessly. It has been the best trailer brake controller I have used over the years, and have used many.
It's been almost a year since I installed this harness. It was plug and play and the only difficulty was finding the Tacoma's pre-wired harness. Everything worked from the start and is holding up.
Installed in a 2021 Tacoma. Looks factory with the mounting panel. No controller hanging at your knees. Easy install too.
I ordered this setup for my 21 Tacoma with the tow package. The harness mated perfectly with the Toyota receptacle under the left front kick panel, the mounting panel looks factory and fit in the dash on the left side of the steering wheel, and the module is mounted to the inside of the kick panel. It is a tight fit, but I was able to get it all in there. I have not had a chance to use it yet. That will be in a month from now.
Easy install with the wiring adaptor. Be sure to order the "face plate" adaptor for dash mount, I did not see that until after I placed the order, it would have saved me some time and effort. It does come with very good instructions.
Plug and Play. It dory get any easier than this. Thanks etrailer for super fast shipping and outstanding customer service.
Great wire harness. Makes installation a snap.
simple install, ground wire grounded on a factory ground lug inside kick panel. Whole install took 30 minutes. Too easy.
Perfect fit for the 2019 tacoma. It would have been ideal if the ground wire was 6 inches longer to fasten to the main ground behind the kick panel.
Plug and play. Super easy. For Tacoma owners the connection is on floor board top left drivers side. Easy to get to.
Two precise plugs seamlessly connected to the factory tow harness and controller. Only one set screw required to fasten the grounding lead. Well worth the dollars spent for the quality engineered harness. Easy, easy, easy.
Fast delivery, easy installation, works great! Much smoother than prior controllers I’ve used. Hardly even noticeable. Great for pulling my Casita trailer.
It’s good for the most part, seems to cut off every now and again but it’s ok
Jenny N - 11/16/2021The wiring harness made installation si mple.
This Redarc unit was very easy to install, this thing works better than ANY old style brands I have previously used haulng trailers in the past. Love the way it can be mounted in any position and works by inertia in any postion. Buy it.
Plugged right into the Tacoma connector. No problems there.
Hardest part was finding the factory wire harness, once I found that I was a perfect match
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.