Product Experts Available Now!
Call 1-800-940-8924
Redarc Tow-Pro Wiring Adapter for Tekonsha Brake Controller Harness
(101 reviews)
Price: $27.00
In Stock
Redarc
Redarc Tow-Pro Wiring Adapter for Tekonsha Brake Controller Harness
Part Number: 331-TPH-017
In Stock
$27.00
Retail:$49.99
You Save: 46%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (101)
- Q & A (0)
- Videos (2)
- Photos
Redarc Accessories and Parts - 331-TPH-017
- Trailer Brake Controller
- Wiring Adapter
- Plugs into Brake Controller
- Redarc
- Universal
Wiring adapter lets you easily connect your Redarc Tow-Pro electric brake controller (sold separately) to your existing Tekonsha brake controller wiring harness. No need to remove your existing wiring harness. Allows for easy, plug-and-play install.
Features:
- Wiring adapter lets you easily connect your Redarc Tow-Pro Classic (331-EBRHV2), Elite (331-EBRH-ACCV2), or Liberty (RED24FR) electric brake controller to your existing Tekonsha brake controller wiring harness
- No need to remove your existing wiring harness when replacing your old brake controller
- One end plugs into Tekonsha wiring harness
- Other end plugs into your Tow-Pro electric brake controller
- Some wire splicing required for Tow-Pro Classic (331-EBRHV2)
- 2-Year warranty
TPH-017 Redarc Tow Pro Wiring Loom Adapter for Existing Tekonsha Brake Controller Harness Connection
Video of Redarc Tow-Pro Wiring Adapter for Tekonsha Brake Controller Harness
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Redarc Tow-Pro Wiring Adapter for Tekonsha Brake Controller Harness Review
Brad Hello neighbors, it's Brad here at Etrailer. And today we're taking a look at the Redarc to Tekonsha wiring adapter for your brake controller. The Tow-Pro Elite is a great system, but unfortunately the downside of Redarc is, they don't have a lot of vehicles specific clips, and so you're left with having to tie these into the wiring on the vehicle. I'm not a huge fan of making connections. If there is a plug and play option available, and that's where this comes into play. Now, this plugs into a Tekonsha plug that goes to our factory clip.
So what they did is they've made this little piggyback adapter here that goes from the Tow-Pro Elite module to the Tekonsha wiring that goes to the factory style plug. And Tekonsha has quite a wide variety of different vehicles. So you generally can find something that's specific to the clips on your vehicle to make it nice and easy. And instead of designing their own for each vehicle specific they just use the Tekonsha, and then this little plug goes into that adapter, making it nice and easy and not having to splice wires. So to get this to work for your specific vehicle, you wanna use our fit guide on the website to determine the Tekonsha wire that you'll need for your vehicle, and then you can simply get this adapter to the Tekonsha and you're gonna be good to go.
In conjunction with that Tekonsha wiring, you can see, we we're able to plug into our factory wiring on the vehicle, no tools required. And that was a look at the Redarc to Tekonsha wiring adapter for your Tow Pro..
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- etrailer mistake
- Product did not meet expectations
- Wrong item was ordered
Ratings & Reviews
4.8
101 reviews
by:
Anthony
06/01/2026
Processed quickly Shipped quickly quality product just as described
by:
Douglas
03/01/2025
This is the greatest thing since sliced bread! I was installing a Tow Pro in my 2023 Nissan Pathfinder. Redarc does not make a wiring harness for that model—but Tekonsha does! So I ordered the Tekonsha harness and this one, then chained them together—Pathfinder to Tekonsha harness to this harness to the Tow Pro. Made the installation super simple!
by:
Ray
07/24/2023
The reason for the average rating is shipping. I requested expided shipping as we were leaving on our adventure. If I knew that wasn't available I would have cancled the order and sourced these parts elsewhere. You made your sale and I'm stuck making other arrangements. Your system is not flexable as I tried to change shipping address or pick up in person. All a solid NO.
Ray J.
7/24/2024
Worked well, plug and play.
by:
Corey
01/20/2026
Works as described
by:
Doug
05/19/2021
This is totally not necessary. The Redarc gives you a plug that fits. It follows the same color code as the Tekonsha harness. It will be a simple 2 minute splice job. I will be splicing the harnesses instead of using this. The wires used in the adapter are smaller that those used in either the Redarc or Tekonsha harnesses use. Although it was built fine, it is a waste of money.
Heather A.
5/20/2021
Thank you for your review. This Redarc Tow-Pro Wiring Adapter for Tekonsha Brake Controller Harness is designed so that you will not need to splice wires when installing the brake controller.
by:
Kenneth
04/16/2025
Worked perfectly on my 2024 Sprinter 2500
Gwendolyn Y.
4/24/2025
Woohoo! Love to hear that, Kenneth. But now the most important question is, what are you going to be towing?
by:
JustSomeGuy
04/27/2022
This adapter coupled with a Tekonsha Plug-In Wiring Adapter (Item #3062-P) worked as advertised to connect my 2022 Subaru Ascent with the factory tow package to a Redarc Tow-Pro Elite Trailer Brake Controller (Item #RED44FR). Just wish I didn't need the non-Redarc adapter in addition to this to finish the project.
by:
Mark
02/28/2023
This brake controller worked well in our 2020 Suburu Ascent. Modified the blank switch plug under the dash to the left of the steering wheel. This took a little time to ream out with a dremel type tool, but the controller know fit in and worked well (youtube videos can be found for this).
by:
Alvin
04/27/2024
The Redarc Tow-Pro Wiring Adapter for Tekonsha Brake Controller Harness made my Redarc install easier.
by:
Jonathan
06/20/2024
Did exactly what I needed it to do, and it arrived quickly. A little ridiculous that there's no direct adapter to plug the Tow-Pro into my 2024 Subaru Ascent. I have to convert Tow-Pro to Tekonsha, and Tekonsha to Subaru, but it seems to work fine, and that's not etrailer's fault.
by:
Ryan
02/07/2024
Great controller
Ryan
2/8/2025
Works amazing, no issues so far.
Robin H.
2/9/2025
@Ryan glad to hear it!
by:
Charles
06/25/2019
I am sorry to say that I ordered the wrong part. I still want it though. Thanks for the fast shipping as I needed this part for my brake controller. I ordered the part before I left LV, Nev and it sent to Stockton. I expected the part Monday, but it arrived Saturday. But the bummer was the part didn't fit the back of my controller.
by:
Richard
06/12/2021
Part was exactly what I needed to complete my Redarc brake controller installation.
by:
Not a happy Customer
05/02/2023
Was saddened to see that this product was delayed by shipping whether at etrailers facility or with the USPS. It was delayed more than 4 days causing me to purchase from camping world at a higher cost in order to meet my departure schedule. Not a happy customer.
by:
Jason
06/09/2022
This made the brake controller truly plug and play.
by:
Joseph
07/17/2020
The 331-TPH-017 connection converter worked as advertised to easily and quickly convert my JT's Mopar connector over to the Redarc connector.
by:
Doris
10/23/2020
Perfect fit! We had the Tekonsha pigtail for the Gladiator but not the plug-and-play connection to the RedArc brake controller. This was it!
by:
Richard
06/26/2020
Excellent customer service. These folks contacted me promptly, that my order was back ordered because of the whole COVID 19 deal. Definitely not their fault, but they took every step to inform me of any update on my order. Fantastic service and product! Thank you!
by:
Anthony
06/22/2022
Works great and was pretty easy to install. eTrailer support helped ensure I had all the right parts.
by:
Carl
03/21/2023
Made wiring up the brake controller a whole lot easier.
by:
Shawn
09/03/2022
Fast shipping, works great with a Gladiator and an Airstream.
by:
U.P.
04/03/2022
received adapter with harness wire and installed in 2021 jeep grand Cherokee limited with factory installed tow package. Everything connected.
by:
Larry
07/22/2024
Was not able to use this adapter due to distance from fuse block to mounting point. Cable could have been 24 inches longer.
by:
John
04/13/2024
Hardest part was trying not to sweat to death in the SC heat. This was super easy to install once I located the receptacle on the car itself.
by:
Jan
09/07/2022
Absolutely excellent! I switched from an app-based assist-brake control to this product. Night and day. From constant worry to being constantly impressed. Thanks!
25
101
true
Show More Reviews
See what our Experts say about this Redarc Accessories and Parts
- Is etrailer or EcoHitch Better for a 2021 Subaru AscentHey Sergi, thanks for reaching out! Go with the etrailer Trailer Hitch Receiver # e55ZR. There are some subtle differences in design but really what the price difference amounts to is the EcoHitch Invisi Trailer Hitch Receiver # 306-X7381 was really the first of it's kind on the market, but then other companies started coming out with their own designs like it and TorkLift/EcoHitch still thinks that their design is much more superior to everything else on the market...which it isn't. Then...
view full answer... - Parts Needed To Install a Redarc Tow-Pro Liberty Brake Controller On a 2020 Ford F-150 XLTYes, you can install the Redarc Tow-Pro Liberty Brake Controller # RED24FR on your 2020 Ford F-150 XLT. You will need the Tekonsha Plug-In Wiring Adapter # 22292 to connect to the factory connector on your F-150 that came with a 7-way towing connector. Then you will connect the Liberty to the Tekonsha harness using the Adapter # 331-TPH-017. There is a chance that your factory connector will not have battery power on the connector. If your connector does not have power you will need the...
view full answer... - Parts Needed to Add 7-Way and Brake Controller to 2018 Toyota Highlander HybridIn order to use the brakes on your trailer you will need to start by adding a 7-way to your 2018 Toyota Highlander. In order to add this you can use the Tekonsha OEM Replacement Vehicle Wiring Harness w Brake Controller Adapter - 7 Way Trailer Connector # 22119. This will plug into the connection point in your rear cargo area for installation. You will also need to splice the blue wire into your vehicle wiring and run the body harness to your car battery. In addition to the 7-way you will...
view full answer... - Brake Controller Plug Location on 2021 Jeep Grand CherokeeThe factory brake controller connector on your 2021 Jeep Grand Cherokee is located under the dash behind the hood latch, as shown in the provided photo. Keep in mind, the connector will only be there if the vehicle has the factory tow package which includes the 7-way trailer connector at the rear bumper. If you have the tow package, to install the Tekonsha # TK90160 Primus brake controller on your 2021 Grand Cherokee you'll need the Tekonsha # TK93VR wiring harness. One end plugs into...
view full answer...
- Recommended Brake Controller for 2025 Forest River Sunseeker With Sprinter ChassisHey Graham! It looks like the Sunseeker is built on the Sprinter 3500 chassis, I recommend verifying that to be sure. For a brake controller I recommend the Redarc Tow-Pro Liberty # RED24FR. This is simple, reliable, and doesn't take up any space in the cab. The main unit mounts behind the dash so only the control knob is visible, giving it an OEM look. Do you have a factory 7-way with the brake controller port? If you do, you can use the Tekonsha Custom Wiring Adapter for Trailer Brake...
view full answer... - Trailer Hitch, Wiring, and Brake Controller for 2020 Ford Transit T350 Crew VanHey Kevin! Starting with a hitch I recommend the etrailer Trailer Hitch # e98842. This is a Class III hitch with a 2" receiver and a bolt-on installation. Based on the information you have given me I'm assuming you don't have factory wiring so you you will need the # 22114 (single rear wheel) or # 22116 (dual rear wheel) to add a 7-way. The correct wiring kit depends on if you have a dual rear wheel setup or not. Double check the rear bumper of your van and see if you have a dummy plug....
view full answer... - Recommended 7-Way and Brake Controller for a 2019 Toyota Highlander XLEYes, the Tekonsha OEM Replacement Vehicle Wiring Harness item # 22119 will fit your 2019 Toyota Highlander. This will provide you with a 7-Way connector and a Tekonsha brake controller adapter. This wiring harness is custom fit and plugs directly into a port in the cargo area of your Highlander. The only wiring you will have to do is for the brake controller adapter. I have linked an installation video below. For a compatible brake controller, I recommend the Redarc Tow-Pro Liberty...
view full answer... - 7-Way Wiring Harness For Installing Redarc Brake Controller On 2023 Toyota HighlanderHello Andy, thanks for getting in touch. We do offer a 7-way harness for your 2023 Toyota Highlander. Take a look at the Tekonsha OEM Replacement Vehicle Wiring Harness # TK57VR. This will plug directly into the OEM 10-pin connector located on the drivers side behind the trim panel near the seat belt bracket. This kit contains all of the wires and components needed to add the 7-way. The plug in your picture is only used for the 4-pin connector. The only thing worth noting is the # TK57VR...
view full answer... - Parts Needed to Add Brake Controller to 2022 Toyota TacomaHi Mark; you can add a 7-way using the Tekonsha OEM Replacement Vehicle Wiring Harness # 22117 if you want or you can use the # ETBC7. The Tekonsha is a full replacement, including the 4-way. The # ETBC7 will save you some money since it doesn't have extra parts you don't need. The Redarc Tow-Pro Liberty Brake Controller # RED24FR and Mounting Panel # 331-TPSI-002 are also correct. However, the wiring harness will depend on the 7-way you add. If you decide to use the Tekonsha then you...
view full answer... - Does the 2024 Mercedes-Benz Sprinter 2500 have the Plug-In for Brake Controller Harness?Hello Brad, I was able to see the video that you referenced that our Brad did. His video is on a 2020 Sprinter 2500, we know the plug-in for the brake controller was on the 2020, the information I am finding on the 2024 is that it may or may not be there. The best way to know if it is there or not, is to go look. I do not have a 2024 Sprinter 2500 here right now to go look for myself, and we have not installed one on that year either for me to watch the video. I am showing that if it...
view full answer... - What Brake Controllers are Compatible With Tekonsha 7-Way Harness TK24FR on 2020 Kia Sedona? The Tekonsha OEM Replacement Vehicle Wiring Harness # TK24FR for your 2020 Kia Sedona is going to come with a Tekonsha brake controller connector. So you will be able to use any Tekonsha Controller like the P2 # 90885 or P3 # 90195. Or the Redarc Tow-Pro Elite Brake Controller # RED63RR will come with the Tekonsha Adapter # 331-TPH-017 so you can use it with a Redarc controller. If you have a Curt or other brand controller you would need to cut off the connector to use it with your controller.
view full answer... - Will Redarc Tow-Pro Liberty RED52VR Fit 2004 Chevrolet Suburban?Hey Larry, Yep, The Redarc Tow-Pro Liberty # RED52VR will fit your 2004 Chevy Suburban. You can probably reuse your existing harness going to your current controller, but I'll need to know the brand of your current controller. You'll need one of the following adapters based on your current controller brand: Curt controller currently # 331-TPH-019 Tekonsha controller currently # 331-TPH-017 Hopkins controller currently # 331-TPH-018 With any of these harnesses, you'll just unplug...
view full answer... - Install Harness for Redarc Tow Pro in 2006 Toyota 4Runner with Factory WiringTo install a Tow Pro Elite Brake Controller like part # RED44FR in your 2006 Toyota 4Runner the correct custom install wiring kit is the part # 3040-P with the adapter # 331-TPH-017 which plugs into the port under the dash of your vehicle and the other end will plug directly into your controller.
view full answer... - Switch Panel for a Redarc Control Knob on a 2022 Subaru AscentThanks for the pictures! I have exactly what you are looking for. We have a couple of mounting options for the control knob that can go inside inserts in your Subaru's dash. This will give you a clean factory look install. The Universal Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob item # 331-TPSI-001 which measures 1-1/4 by 1 inch. There is also the option of using the Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob item # 331-TPSI-002...
view full answer...
- Redarc Plug and Play Brake Controller Adapter for a 2021 Audi Q7Since your 2021 Audi Q7 has the factory tow package you do have a brake controller port but Redarc didn't make a specific plug and play adapter for it. There is a work around that will let you install your Redarc Tow Pro Liberty item # RED24FR or Elite item # RED44FR without having to cut or splice wires. You can use the following two adapters connected together instead of having to hardwire: Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers item # TK22FR Redarc Tow-Pro Wiring...
view full answer... - Availability of 7-Way Wiring for 2023 Toyota HighlanderWe do have a 7-way blade wiring harness available for your 2023 Toyota Highlander. What you need is the Tekonsha OEM Replacement Vehicle Wiring Harness # TK57VR. This plugs into the connection in your rear cargo area for installation. You can use the # PK12711U and # 18140 brackets to mount the 7-way connector at the back. For a brake controller I recommend the Redarc Tow-Pro Liberty # RED24FR. The main unit mounts out of site so only the control knob is visible in the cab. The knob controls...
view full answer... - Parts Needed to Install Redarc Tow-Pro Elite Brake Controller on 2021 Chevy Silverado 1500It sounds like you have the factory tow package on your 2021 Chevy Silverado 1500. The # RED63RR is a good start since it comes with the Tekonsha Adapter # 331-TPH-017 for the Tow-Pro Elite. The only other thing you will need is the Tekonsha # 3064-P. One end of this wiring harness will connect to the adapter and the other will plug into your factory tow port under the dash. I have attached an installation video for your reference.
view full answer... - Will Tekonsha Wiring Harness Fit New Tekonsha Brake Controller When Upgrading to ProportionalHey Rich! Yes, your existing Tekonsha wiring harness will be able to plug into a new Tekonsha brake controller. However, you may have difficulty finding one. Tekonsha is for sale following the bankruptcy of their parent company, and most of their parts are hard to find. We haven't had their brake controllers for a few months now. If you want a really reliable alternative I recommend the Redarc Tow-Pro Liberty Brake Controller # RED24FR. The Liberty is really easy to use and only the control...
view full answer... - How Do I Install A Brake Controller On My 2022 Jeep Wrangler Unlimited With The Factory Tow Package?Having the factory towing package on your 2022 Jeep Wrangler Unlimited will actually make life a lot easier. You will need a couple parts to get the Redarc Tow-Pro Elite up and running, but it's easier than you think. The Redarc Tow-Pro Elite is also a controller I recommend a lot as it will have one of the cleanest looks once install, if not the most. It also works very well and is the controller I would put in my Silverado if I ever needed one. With that said, all you need is some wiring, First,...
view full answer... - Parts Needed to Install Redarc Tow-Pro Liberty on 2022 Chevrolet Suburban With Tow PackageHello Lyle; the Redarc Tow-Pro Liberty # RED24FR is my favorite brake controller so I think that is a great choice. With the factory tow package you should have a port under the dash that allows you to plug in the brake controller for installation instead of hardwiring. This will require a separate wiring harness like the ones you're referencing. Redarc doesn't have a custom wiring harness for the 2022 Chevy Suburban but we can still make it work. What you will need is the Tekonsha Plug-In...
view full answer... - Recommended Brake Controller and Plug In Harness for a 2014 Acura MDXHey David. I do have a couple of harnesses that will allow you to install the Redarc Tow-Pro Liberty item # RED24FR without cutting or splicing wires, however the Plug-and-Play Wiring Harness item # RED59FR will not work on the 2014 MDX. It only worked on the 2007 - 2012 model years with the factory tow package. To install the Redarc Tow-Pro Liberty item # RED24FR in your 2014 Acura MDX you'll need the following adapters: Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers...
view full answer... - Wiring Parts Needed to Install Redarc Tow-Pro Liberty Controller on a 2021 Jeep Grand CherokeeHey Willem, thanks for reaching out! To install the Redarc Tow-Pro Liberty Brake Controller # RED52VR to the factory tow package plug on your 2021 Jeep Grand Cherokee you need the Tekonsha Plug-In Wiring Adapter # TK93VR as well as the Wiring Adapter # 331-TPH-017 to make the controller compatible with the Tekonsha harness.
view full answer... - Availability of Wiring Harness for 2024 Nissan Pathfinder Rock Creek Using Redarc Tow-Pro LibertyHey Charles! Redarc doesn't have a specific wiring harness but you can still make the Redarc Tow-Pro Liberty # RED52VR you ordered plug and play. I see you ordered the Tekonsha # 3050-P as well. This will plug into the factory port under your dash but it won't fit into the Liberty. You will also need the Redarc Tow-Pro Wiring Adapter for Tekonsha Brake Controller Harness # 331-TPH-017 to make the two compatible. What kind of trailer will you be towing?
view full answer... - Do the Wire Colors on the Tekonsha Plug-In Wiring Adapter Match the Redarc Tow-Pro EliteThe colors on the wiring between the Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR and the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers # 3064-P will match in terms of function. It sounds like you are wanting to use the # 3064-P to install the # RED44FR. No plug is present under the dash, but the needed wires are already run. You will connect the brake controller wiring with the vehicle wiring already present under the dash. Since the # RED44FR comes with a...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Edited by:
Lindsey S
Expert Research:
Jameson C
Video Edited:
Jacob T
Video by:
Dustin K
Video by:
Jonathan Y
Installed by:
Cole B
Test Fit:
Andrew J
Test Fit:
Bradley B
Updated by:
Wilson B
Written by:
Kristina F
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Gwendolyn Y.
3/4/2025
It's the yeast they could do since they don't have a custom harness for your Pathfinder :)