To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Install your Redarc Tow-Pro electronic brake controller (sold separately) quickly and easily with this custom wiring adapter. Plug one end of the adapter into your Tow-Pro brake controller and plug the other end in beneath your vehicle's dash.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Brad Hello neighbors. It's Brad here at etrailer. And today we're taking a look at the vehicle-specific wiring harness, that will work in conjunction with the Tow-Pro Elite electric trailer brake controller. These harnesses are going to be great to work with your Tow-Pro Elite in a variety of different trucks and SUVs. Now, make sure that you get your vehicle-specific harness. You're going to want to use our fit guide on "etrailer.com", and that's going to make sure that you get the right harness, and that way your install goes nice and easy.
Included in the REDARC kit, you will find this plugin adapter, and this is going to have these spliced ends, and you're gonna have to tie into your brake signal, your brake output, your power output and your ground. Now, if you are pretty handy with electrical, that's awesome. That's great. You can use this. But I'm the kind of person, plug and play in OEM kind of setup or really nice factory one like this.
This is the vehicle-specific harness. So this ties in directly to our factory tow system, and clips right in, it's got this nice braided sheathing on it, to kind of protect the wires, and then it plugs directly into our module here. So, to save yourself a little bit of headache and time, and make the install go that much smoother, and not have to worry about loose connections, I highly recommend getting the vehicle-specific harness. So this end of the plug is specific to your vehicle. As you can tell, it looks like the factory plug, it fits in perfect, has the locking mechanism, so you aren't gonna have to worry about loose connections happening with your plug, and it's going to make install a lot easier.
And that was a look at the vehicle-specific harness for the Tow-Pro Elite electric trailer brake controller..
Average Customer Rating: 4.8 out of 5 stars (290 Customer Reviews)
Install your Redarc Tow-Pro electronic brake controller (sold separately) quickly and easily with this custom wiring adapter. Plug one end of the adapter into your Tow-Pro brake controller and plug the other end in beneath your vehicle's dash.VERY happy with the ease of installation. I had an insert made on a 3D printer to mount the control where the factory brake would have mounted.
The name says it all, it truly was a plug and play experience installing the wiring harness. I realized after the harness arrived that my 4Runner came with a cable with one end ready to plug in and the other end ready for a connector. Although I could have saved a little money terminating it myself, I went with the premade Redarc harness and was done in minutes. I have no regrets, it was money well spent and I was on the road in no time. Highly recommended.
This is my 3rd redarc. It’s a great product compared to a conventional brake controller hanging under the dash. The main downside to the redarc is the control knob. You can’t see the numbers very well to adjust it while driving, as they are not well lit. Otherwise, it works as expected
After a year of owning and pulling a camper it has been flawless. Easy install. I will say do your research on the best way to set it up for your vehicle. I drove on dirt roads around 5mph and adjusted it until I was right on the edge of skidding the trailer by pressing on the controller.
Not safe to use, very poor quality product. May cause and accident due to not working properly with a brake controller. Do not buy it! It is not compatible with anything.
It wasn't plug and play with the factory setup. Had to cut the harness and install my own wires and breakers.
What can you say, "Plug-and-play" worked as it should.
Love that it is mostly plug and play. 4Runner is already wired for a brake controller and the cable I ordered made it simple to just plug it in. I didn’t get the custom switch blank for the 4 runner so I had to modify the existing one and that was a lot of work. Would order blank if doing again. Install was pretty easy. Haven’t towed a trailer yet so not sure how well it works. Looks like factory item after installed.
Perfect match to the vehicle making controller wiring a simple process.
Watched the video that demonstrated how to install the Redarc brake controller in my 4Runner. SIMPLE with the plug and play harness I ordered through you folks. In spite of it being shipped from the states to Canada, it got here in a very acceptable time frame. I believe I'll do the install tomorrow. Thanks ... BRW
Made the brake control install very sim ple.
Albert G.
6/11/2022
Still working like a factory option. Highly recommend for an easy brake controller installation,
Works awesome. I purchased a separate knob panel insert which made the entire installation plug and play. Would buy again.
I watched the stock video for installation on a Tundra, and it was perfect.
Trailer brake easy to install....works great and accessory switch fits perfect...
Very helpful and patient with my question. 1 year out and I’m very happy with my purchase!
This part fits my 2018 Lexus GX460. Install was simple.
made install fast and easy hence the Plug and Play
I called them and needed this part overnight and they made it happen, great company to deal with and appreciate all of the help!
Toyota apparently thinks if you really want a brake controller in a 4Runner, you are going to have to work for it. The wiring harness was perfect once I found the Toyota connector plug.
This thing works so good. I actually went and bought a second one for the motorhome and replaced. It was one of these. This is the only one I’m buying from now on.
Worked flawlessly. Everything was plug and play, had the kit installed in less than an hour. I would highly recommend etrailer to those looking for towing/trailer accessories.
Just what I needed.
Arrived early and looks to be the ticke t.
Nice to see companies that think of the customer, keep it simple, do the wire harness and it installs so quick and easy!
The trailer brake controller works well and integrates well into our 4Runner.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
John
3/27/2024
Still love it.