Trailer Jack   x   >    Side Frame Mount Jack   x   >  

Replacement Fulton F2 trailer jack sold without mounting hardware.

Heavy-duty jack with integrated drive function replaces your ordinary trailer jack and takes the hassle out of hooking up and moving your trailer. Simply turn the crank that powers the drive system and direct your trailer with the steering handle.

Pull the side-facing plunger pin on this heavy-duty jack to release the drop leg for an extra 13-1/2" of lift. The durable jack screw offers increased strength. The built-in grease zerk allows effortless greasing. Sidewind crank included.

Corrosion-resistant swivel jack is great for marine use. Bracket height is 27" when extended, 15" when retracted. 8" Wheel turns 360 degrees so you can maneuver in any direction. Bolt-on installation with included hardware.

Corrosion-resistant zinc plating makes this jack great for marine use. Spring-loaded handle lets you easily swing jack up for travel and down for use. Dual wheels offer support and simple maneuverability. Fits trailer tongues up to 4".

Fulton sidewind trailer jack designed for use with marine and utility trailers. 5,000 lb capacity and a 5-year limited warranty.

This swivel jack pivots up for travel and down for use. Square design provides side-load support. Retracted height is 14-1/2". Extended height is 29-1/2". Drop leg offers an extra 13-1/2" of lift. Weld-on pipe mount included.

Maintenance-free, corrosion-resistant jack is made for marine, recreational and utility trailers. Features aluminum alloy construction, adjustable mount and swivel system and wide-track wheels for superior stability.

Maintenance-free, corrosion-resistant jack is made for marine, recreational and utility trailers. Features aluminum alloy construction, adjustable mount and swivel system and twin-track wheels that roll independently to aid in maneuverability.

Corrosion-resistant, clear zinc swivel jack with 5-3/4" wheel is perfect for marine use as well as other recreational applications. Jack has an extended height of 23-1/2", a retracted height of 13-1/2", and a capacity of 1,000 lbs.

With corrosion-resistant zinc plating a poly wheel base and 13" retracted height, this retaining-ring swivel jack is perfect for marine applications. Measures 11" from mounting bracket to top of jack. Inner tube diameter is 1-3/4".

Weld-on jack has a retracted height of 24-3/4" and an extended height of 40-1/8". Square design provides superior side-load support. The drop leg offers an extra 13-1/2" of lift. Includes a sidewind handle.

This heavy-duty, square, drop-leg jack is smaller than typical large-capacity jacks - perfect for tight-fitting applications. Welds directly onto trailer with no burn through and has 25-11/16" retracted height.

With corrosion-resistant zinc plating and 7" retracted height, this drop-leg jack is perfect for marine and other recreational applications. Measures 19" from mounting bracket to top of jack.

Pull the front-facing plunger pin on this heavy-duty jack to release the drop leg for an extra 13-1/2" of lift. The durable jack screw offers increased strength. Get maximum lifting power in low gear and fast cranking in high gear.

Pull the front-facing plunger pin on this heavy-duty jack to release the drop leg for an extra 13-1/2" of lift. The durable jack screw offers increased strength. The built-in grease zerk allows effortless greasing. Sidewind crank included.

Bolt-on jack has a rust-resistant zinc finish, making it great for marine use. The square design provides superior side-load support. Retracted height is 7-1/4". Extended height is 22-5/8". Drop leg offers an extra 13-3/4" of lift.

With corrosion-resistant zinc plating, a durable, poly wheel base and 12-3/4" retracted height, this swivel jack is perfect for marine and other recreational applications. Measures 12-1/2" from mounting bracket to top of jack.

Corrosion-resistant, clear zinc swivel jack with 5-3/4" wheel is perfect for marine use as well as other recreational applications. Jack has an extended height of 23-1/2", a retracted height of 12-1/2", and a capacity of 1,200 lbs.

Drop-leg jack with heavy-duty footplate base and swivel mount offers superior side-load strength in a compact package. Jack has 22-2/3" retracted height and measure 12-2/5" from mounting bracket to top, excluding handle. Crank included.

With a corrosion-resistant zinc finish, a poly wheel base and a 13" retracted height, this retaining-ring swivel jack is perfect for marine applications. Measures 11" from mounting bracket to top of jack. Inner tube diameter is 1-3/4".

This swivel jack pivots up for travel and down for use. Square design provides side-load support. Retracted height is 14-1/2". Extended height is 29-7/8". Drop leg offers an extra 13-1/2" of lift. Weld-on pipe mount included.

Maintenance-free, corrosion-resistant jack is made for marine, recreational and utility trailers. Features aluminum alloy construction, adjustable mount and swivel system and wide-track wheels for superior stability.