The rule of thumb for estimating a tongue weight is 10-15 percent of trailer weight. A 4,600 pound trailer would have a tongue weight between 460 and 690 pounds. Somewhere between a 1,000 to 2,000 pound capacity jack would be fine. Having a jack that…
Hey Rod, The Ark Xtreme Off-Road Jack w/ 2 Wheels #ARK99FR has multiple slots in the outer tube of the jack that the mounting bracket can slot into. In the bottom slot you'd be right around 9-1/2" between the ground and frame with the wheels…
You would choose a side wind or top wind jack based on several factors. Each has its advantages. If clearance is an issue for the radius of a top wind, then you would choose a side wind. The opposite is also true. It is my experience that a side…
In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.
Hello Greg, thanks for reaching out. Yes, the Trailer Valet JXS Drill Powered Drop Leg Trailer Jack w/ Footplate #TV36FR will indeed fit a 6-1/2" tall 4" wide I-beam frame. The bracket will fit frames up to 6-1/2" tall and 6" wide…
Here is an image I have from the Xtreme Off-Road Swing-Up Trailer Jack #ORJW750D in zinc which will have the same dimensions as the black Jack #ORJW750BD you are looking at.
For a jack that is similar and has a bolt-on installation I recommend the Trailer Valet JXS Trailer Jack w/ Footplate #TV64FR. This is a sidewind swivel jack with a 5,000 lb support capacity that fits a frame up to 4-3/4" tall x 3-3/4"…
Yes, the Extreme Off-Road Swing-Up Jack w/ Dual Wheels iItem #ORJW500D will work for your T@B 400 Tear Drop Trailer. It looks like your trailer comes with an a-frame jack. You would need to ensure you have enough space on your tongue to accommodate…
There are some Dutton-Lainson trailer jacks that are made in the USA as well as a few that are not. Any jacks that we carry that are made in the USA have that as part of the description to help set them apart. Currently we have the following options:…
Hi Scott; the Bulldog Round, A-Frame Jack #BD155033 you were looking at is the best replacement for your 1551060301. This jack has the same 2,000 lb capacity, topwind handle, and 15" travel you have now. If you want the caster wheel again you…
Hey Kevin, I took some overall measurements on the Replacement Power Unit for etrailer and Ram Hydraulic Trailer Jacks and Scissor Hoist Systems #e43VV and drew up a little diagram below. If you need any other specific measurements just let me know…
The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…
(1)
Filter Results
