Travel Trailer Camera for 2026 GMC Sierra 1500 Towing 2026 Brinkley I 280.

Question

Question:

I have a 2026 GMC Sierra and I want to add a backup camera to my travel trailer that will connect to my in dash system. Can you recommend one? It is prewired for a furrion camera. It is a 2026 Brinkley I 280 trailer.

asked by: Doug S

0

Expert Reply:

Hey Doug, congratulations on the new truck and trailer! That is a nice setup for sure. Unfortunately, the backup cameras aren't going to integrate with your dash cam system. Since you're already prepped for Furrion, and it is the best on the market right now, I recommend using the Furrion Vision S+ # FR57AD.

The camera will mount up to the shark fin on the back of your Brinkley for a simple installation. Then you will have the separate 7" monitor in the cab of your truck. If you want to get creative, we have seen some people print a mount for their rearview mirror so it is out of the way while you're towing. We also have the # FR64AD if you want to add the side marker cameras as well.

Where are you headed next with the Brinkley?

expert reply by: Robin H

0

Furrion Vision S+
(click to enlarge)

Bill

4/19/2026

Works great highly recommend it

Mike

4/20/2026

I recently upgraded to the S+ rear camera, side markers and 7” monitor. My Grand design was prepped for rear camera so the installation was easy. With the headlights on and plugged into my break light plug, it runs thru my 2021 Toyota Tundra. Unfortunately that doesn’t show up in my tru media display but with Bluetooth the 7” monitor works great and has a very clean picture with back up markers. I purchased a phone mount that locks down to my are vent on the dash. I have a second mount that holds the monitor when I need it. Just switch the mounts, easy. Great for trailing and backing in.

David M.

4/20/2026

I have the Furrion Vision S+ installed on a 40' toy hauler. It has a nice clear picture on the Furrion monitor. I have noticed an occasional frame freeze that lasts just a second or two. By occasionally I mean once or twice an hour. (The camera this replaced would cutout and totally lose its connection fairly frequently so this is an awesome improvement.) I think you won't regret buying it if you do. I have 2026 Ford and checked to see if its camera options would see the Furrion, it didn't.

Answer 1

Hey Lorenzo. Your 2024 Chevrolet Silverado 3500 has what's called Pulse Wave Modulation, which will not provide the wireless cameras with the correct power it needs to run when connected. This is a power saving feature in newer trucks. To fix…

view full answer...

Answer 2

We definitely know about the issue you are referring to. We have just the part for you! Furrion recently came out with a brand new adapter for your 2022 GMC Sierra 1500 Limited to work with your camera system. The part you need is the 7-Way Vehicle…

view full answer...

Answer 3

Hi Eric, I see the photo that you're referencing for the K-Source Snap & Zap Custom Towing Mirrors part #KS49NQ and it looks like it was submitted by a customer who painted them. I found the review attached to those photos that customer left…

view full answer...

Answer 4

The specs I found for the 2018 Dutchmen Coleman Lantern 263BH tandem axle travel trailer indicate a dry weight of 5871-lbs and a payload capacity of 1729-lbs. Added together these become the GVWR for the trailer, the gross vehicle weight rating, the…

view full answer...

Answer 5

Hi Glenn, The best option to carry bikes on your new 2026 Hyundai Ioniq 5 N is going to be with a hitch mounted bike rack. However, there is currently no aftermarket trailer hitch available for your 2026 Hyundai Ioniq 5 N. Hyundai does offer an OEM…

view full answer...

Answer 6

*Updated From Below Hi Michael; I'm sure you're right, it is probably prepped for the Furrion. Since Furrion is phasing out the old Vision S, and parts won't be available soon, you want to get the new Furrion Vision S+ Wireless RV Backup…

view full answer...

Answer 7

Hey Mike, your 2025 Chevy Silverado 2500HD will have the power issue with the Furrion Vision S + #FR57AD that you have so you would need a solution like the part #VGR64VR that you referenced. Or if you don't want to mess with any wiring you could…

view full answer...

Answer 8

Hey, Joe. That's a great question. Backup cameras and rearview, observation, cameras are essentially the same, the difference comes down to how they’re wired. With a system like the Furrion Vision S+ Wireless RV Backup System #FR57AD, it’s…

view full answer...

Answer 9

Hey Bill, yes the Furrion Vision S+ #FR64AD would be a direct replacement for your current Vision S system. None of it is backwards compatible with the standard Vision S system though.

view full answer...

Answer 10

Hey Michael. The backup camera that comes with the Furrion Vision S+ System item #FR57AD has built in mounting holes in the casing. It comes with four #6 x 3/4" flat head self-tapping screws, four #4 x 1/4" self-tapping screws, sealant, and…

view full answer...

Answer 11

Hey Mary! The 12V PWM Filter #VGR64VR will work with the Furrion camera and prevent any issues with the PWM from your 2020 Sierra. However, I do recommend getting the Furrion Vision S+ #FR57AD over the old Vision S. They use the same mount so this is…

view full answer...

Answer 12

Hey Mike, it is important that you use the included power cable with the Furrion Vision S+ Wireless RV Backup System w/ 1 Camera #FR57AD like the instructions indicate. If this is like a hardwire install I would look for a cigarette lighter to 2-wire…

view full answer...

Travel Trailer Camera for 2026 GMC Sierra 1500 Towing 2026 Brinkley I 280.

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching